Lee Technology Korea LTK-1300HR PAGING TRANSMITTER User Manual

Download:
Mirror Download [FCC.gov]
Document ID	776778
Application ID	p5szsha9tglSOU3CL6LbKg==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.75kB (34316 bits)
Date Submitted	2007-04-04 00:00:00
Date Available	2007-04-05 00:00:00
Creation Date	2007-04-03 17:52:24
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-04-03 17:52:24
Document Title	untitled

OPERATIONAL MANUAL
(LTK-1300HR)
FCC ID : QBTLTK-1300HR
Trade Name : Pager Transmitter
Model No. : LTK-1300HR
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING
INTERFERENCE
THAT
MAY
CAUSE
UNDESIRED
OPERATION.
LEE TECHNOLOGY KOREA CO., LTD.
IMPORTANT SAFETY INFORMATION
RF EXPOSURE STATEMENT
Your Pager Transmitter contains a radio frequency transmitter.
When the button is pushed the transmitter sends our RF signals.
CAUTION : To comply with FCC RF exposure compliance requirements,
a separation distance of at least 25mm must be maintained
between the antenna of this transmitter and all persons, during
normal operation. The antenna used for this transmitter must not be colocated or operating in conjunction with any other antenna of
transmitter. Unauthorized antennas, modifications, of attachments
could damage the transceiver and may violate FCC regulations.
SPECIFICATION
Pocsag Code
Frequency Range: 450.0000MHz ~ 470.0000MHz
FM modulation & FSK (frequency shift keying)
Deviation: 4.5KHz
FM Accuracy : +/-5% 4.275< 4.5 < 4.725
Date Rate: 512 BPS, 1200BPS, 600Hz +/-5Hz
Message: Numeric: Max. 12 digits
Address Range: 0001 to 1249
Please read this manual thoroughly to familiarize yourself with the procedures
for proper care of your system. We are confident our cutting edge products and
first rate service will satisfy your needs for years to come.
1. To Page
To page the pager, press one of the numbers (①, ②, ③, ④). The transmitter
number and button number will be sent.
Ex) Press the number ① : The button number + transmitter number will be
sent.
※ Detailed information for the button :
① Picture
[ Press the number ① : The button number (Picture) + transmitter number
will be sent. ]
② Sound
[ Press the number ② : The button number (Sound) + transmitter number
will be sent. ]
③ Piracy
[ Press the number ③ : The button number (Piracy) + transmitter number
will be sent. ]
④ Other Disturbance
[ Press the number ④ : The button number (Other Disturbance) +
transmitter number will be sent. ]
2. Setup Mode
1) Transmitter Number Setup Mode.
(1) To enter the Transmitter Number Setting : Press the number ① and ③
at the same time, and then NO>__ will be displayed on the LCD screen.
The available Transmitter Number is from 00 to 99.
(2) Transmitter Number Setting : Press the number ① to change the first
digit number placed at the left side, Press the number ② to change the
second digit number placed at the right side. Press the number ④ to
exit to the initial screen.
Troubleshooting
Charge light will not come on
a. Make sure there is power to the outlet
b. Try changing the position of the Transmitter on the charger base.
c. Check all connections on charger bases.
Transmitter will not display anything
a. Make sure there is power to the outlet
b. Check all connections. If you try all this and the transmitter still wont power up your power
supply may be bad. If display is still blank, call us
Before you call, try some of the following suggestions…
*Remember that the capability of your system will be affected by: Foil backed wallboard, Metal
mesh, wire reinforced glass, metal sheeting, large mirrors, suspended ceilings, lift shafts etc.
These can all reflect and thereby reduce the signaling capability of the transmitter. A little
forethought prior to installation, coupled with a few tests, can normally avoid most of these
problems.
1.Read through the manual. Answers to most questions can be found there.
A trouble shooting section further assists you in diagnosing the problem.
2. IMPORTANT NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this equipment not expressly approved
by LEETEK may void the FCC authorization to operate this equipment.
3. CAUTION : Never use any cleaner other than alcohol for the maintenance of this equipment.
Organic solvent such as benzene, toluene or acetone may spoil the plastic parts of this
equipment.
4.RF Radiation Exposure
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment must be installed and operated with a minimum distance of
25mm between the radiator and your body.
5.Do not subject this equipment to:
1)Mechanical shock 2)Excessive humidity or moisture 3)Extremes of temperature 4)Corrosive
liquids
6.Warning ! No user serviceable parts
Alteration or modification to any part of this equipment, without the prior written consent of
the manufacturer, will invalidate all manufacturer approvals and warranty. No adjustments can
be undertaken except by qualified and licensed persons as defined by the FCC Rules and
Regulations. Operation of altered equipment can result in fines, imprisonment, and /or
confiscation of such equipment.
WARRANTY
LeeTek warrants this product against any defects that are due to faulty material or workmanship for a oneyear period after the original date of consumer purchase. This warranty does not include damage to the
product resulting from accident, misuse or improper electrical connection. Power supplies are warranted
for 60 days. We recommend the use of a surge protector with all equipment. If this product should
become defective within the warranty period, we will repair or replace with equivalent product, free of
charge. We will return your product, transportation charges prepaid standard shipping mode, provided the
product is shipped prepaid to:
LEETEK, 3rd FL #499-2 Sang 3-dong, Wonmi-gu, Pucheon-city, Kyunggi-do, KOREA
No return will be received without prior authorization and the proper RMA # posted to the outside of the
shipping container.
This warranty gives you specific legal rights and you may also have rights which vary from state to state.
I need to send some transmitter in for repair - What do I do?
Within warranty period / Covered by our Product-Care Program:
Ship malfunctioning components to the following address:
3rd FL, #499-2 Sang 3-dong, Wonmi-gu, Puchon-city, Kyunggi-do, Korea
Tel: 82-32-678-8605 Fax: 82-32-324-9840
1. Pack the components securely
2. Enclose a note with a brief description of the problem
3. Include a business card
4. Ship the equipment in a traceable manner for your protection. (ie UPS, EMS, Fedex, etc).
5. Insure the shipment for replacement value.
There are no charges for repaired equipment within the warranty period, or if covered by
Product-Care, other than your shipping costs. We will pay shipping one way back to you. The
high rate courier service is available at an additional charge.
Hints and Tips
Training is the key to success with a paging system.
Orientating your entire staff and training your host staff on the use of the paging system is key
to the success of the system.
As a part of the general host training program, time must be set aside to teach new hires about
the use and care of the paging system. Be certain staff members understand the importance of
asking for the transmitter back after work.
Benefits of a VISUAL paging system
Staff members are alerted thru the pager and know to quickly close the tab of a guest to help
speed table turns.
LEE TECHNOLOGY KOREA CO., LTD.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 8
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:4cc1b350-3ad5-4645-92af-086a3023f739
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2007:04:03 17:52:24+09:00
Create Date                     : 2007:04:03 17:52:24+09:00
Document ID                     : uuid:b19a923a-afd5-413e-8109-37cae3ddc151
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools