Lee Technology Korea LTK-LTA-6465 Mini RCL Charger Transmitter User Manual

Lee Technology Korea Co., Ltd. Mini RCL Charger Transmitter Users Manual

Users Manual

MINI RCL CHARGER TRANSMITTER Manual           LEE TECHNOLOGY KOREA CO., LTD. email sales@leetek.org website www.leetekorea.com         KOREA HEADQUARTER                                                                                                          US OFFICE 3rd Fl. 499-2, Sang3-dong,                                                    530 Highland Station Drive, Suite 2004, Wonmi-gu, Bucheon City,                                                                          Suwanee, GA 30024, U.S.A. Kyunggi-do, Korea Tel +82-32-324-9838                                                                                            Tel +1-678-714-2161 Fax +82-32-324-9840                                                                                          Fax +1-678-714-2162 Alpha Paging System                                                                                                          User    Manual
                                    NOTICE This  manual,  software  and  electronic  circuitry  are  copyrighted.  All  rights  reserved.  Under  the copyright laws, this manual,  software and electronic circuitry may not be copied,  in  whole  or  in part without written prior consent of Lee Technology. All  information  provided  in  this  document  is  carefully  prepared  and  offered  in  good  faith  as  a guide in the installation, use and servicing  of our products. Installers must ensure that the final installation  operates  satisfactorily  within  the  relevant  regulatory  requirements.  Lee  Technology accepts  no  responsibility  for  incorrect  installation.  Lee  Technology  reserves  the  right  to  change products, specifications and installation data at any time without notice. Lee  Technology  makes  certain  limited  warranties  with  respect  to  defective  diskettes, documentation  and  electronic  circuitry.  Please  see  the  associated  information  contained  on  this page. LIMITED WARRANTY With respect to the physical documentation and physical electronic circuitry enclosed herein, Lee Technology warrants the same to be free of defects in materials and workmanship for a period of one  year  from  the  date  of  purchase.  In  the  event  of  notification  within  the  warranty  period  of defects  in  material  or  workmanship,  Lee  Technology  will  replace  the  defective  diskettes, documentation and electronic circuitry. The remedy for breach of this warranty shall be limited to replacement  and  shall  not  encompass  any  other  damages  including  but  not  limited  to  loss  of profit and special incidental, consequential, or other similar claims. Lee  Technology  Korea  specifically  disclaims  all  other  warranties,  expressed  or  implied,  including but not limited to implied warranties of merchantability and fitness for a particular purpose with respect to defects in the documentation and electronic circuitry and the program license granted herein,  in  particular,  and  without  limiting  operation  of  the  program  license  with  respect  to  any particular application, use or purpose.
IMPORTANT SAFETY INFORMATION                         NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.   RF EXPOSURE STATEMENT Your Pager Transmitter contains a radio frequency transmitter. When the button is pushed the transmitter sends our RF signals.  CAUTION: To comply with FCC RF exposure compliance requirements, a separation distance of at least 8 inches (20 cm) must be maintained between the antenna of this trasmitter and all persons, during normal operation. The antenna uesd for this transmitter must not be colocated or operating in conjunction with any other antenna of transmitter. Unauthorized antennas, modifications, of attachments could damage the transceiver and may violate FCC regulations.  Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
 TABLE OF CONTENTS   1. SYSTEM INTRODUCTION     1) SYSTEM SUMMARY     2) SPECIFICATION  2. INSTALLATION     1) EQUIPMENT SETUP     2) PLACEMENT     3) EASY INSTALLATION INSTRUCTION  3. SYSTEM SETTING      4. OPERATION  5. HOW TO USE     1. SYSTEM INTRODUCTION    1) SYSTEM SUMMARY     RCL  Paging  System  was  designed  to  help  restaurants  manage  incoming  customers efficiently and distinctively. Customers receive instant notification when their table is ready, making them feel special and welcome. Freed from long lines, your restaurant looks more inviting to people walking in, customers are encouraged to wait without fears of missing their table, resulting in higher traffic, while overall restaurant traffic flows more smoothly, leading to faster table turns. By offering perfect customer service the instant a customer appears, you will enjoy greater competitiveness, revenues and profits.    2) SPECIFICATION   FEATURE BENEFIT
TECHNOLOGY ° UHF Technology ° Perfect for large restaurant and multiple levels TRANSMITTER ° Built-in Clock ° Wireless Pager Programmability ° Durable and Sturdy to withstand industry conditions ° Selectable Frequency, Pager Alert Type, and Alert Time ° Out of Range ° Field Test ° Powered by power supply PAGER ° POCSAG Code ° All Pagers work on Single Transmitter Platform ° Smart Charging System with own Charger Base ° Advertise with Paddle insert sheet RESTAURANT SYSTEM ID ° Unique Base ID to eliminate overlapping message RECHARGEABLE BATTERY ° Smart Charging eliminates over-charging and extend battery life   APPLICATION °  Restaurant,  Café,  Hotel,  Pharmacy,  Church,  Super  market, Car Wash and Auto Dealer shop 3) MODEL SPEC 1)MODEL : LTA-6465 2) Frequency    Range : 450Mhz ~ 470Mhz 3) Data Rate : 1200&512 4) Standard Deviation : +- 3.5Khz below 5) Modulation : GFSK 6) Channel Spacing : 12.5Khz 7) Output Power : 32dBm below 8) Code Format : POCSAG 9) Dimension : 138mm x 160mm x 30mm 10) Weight : 300g , (pager : 92g)   2. INSTALLATION
  1) EQUIPMENT SETUP     (1) Transmitter       Unwrap all sending unit components. Lock the antenna into the hope in the upper right hand corner of the transmitter. Plug the power supply with the large tip into a standard outlet and plug it into the back of the transmitter. We recommend some type of surge suppressor  on  the  power  supply  for  protection.  Power  surges  are  not  covered  under system warranty.      (2) Pager       Locate the charger base in a sturdy, out of the way location. Connect the charger bases together using included jump wires. Use the power supply with the small tip and plug it into a standard outlet and into either open plug on the charger base. Be sure to plug the jump wires & power supply jack in all the way.       Insert  the  pagers  into  the  charger  base.  The  flash  of  charging  indicator  next  to  the number label will be lighted.       You should check a charging indicator appear on each pagers. This light indicates proper charging is taking place.           2) Installation of transmitter Stepu Lock the antenna to the right corner of the Mini Transmitter.   (Fit over plug and twist left to lock antenna in place) Stepv Plug the Mini Transmitter A/C adaptor into the Mini Transmitter and then into a standard outlet. A surge protector is recommended. Step w Mini Transmitter will be fully charged in 4 hours.   3. SYSTEM SETTING  Using SETUP MODE (1) Setup Mode How to Enter:  ↑  Key Press and hold 3 seconds. (2) Key Operation details Menu Up -  ↑  , Menu Down -  ↓, Enter - Send, Cancel - Send Press and hold 3 seconds, number - 0 ~ 9
NO. SETUP MODE Function  Remarks 1 bASE Available only when using the same ADDRESS (0~200)  Base ID 2 g-Id Ability to set the Group ID  Group ID 3 A-Id Ability to set the All Page ID  All Page ID 4 bPS The transmission rate of the signal to display.(512 / 1200)  Baud Rate 5 FrEq 450.000Mhz~ 470.000Mhz  Frequency 6 tyPE System Mode settings (nor / 10b / 06b)  TYPE 7 Alt ALERT behavior can be changed (A-00 ~ A-06)  ALERT 8 Altt ALERT TIME can be changed (t-00 ~ t-06)  ALERT TIME 9 tESt RANGE TEST MODE  TEST 10 V-XX  model VERSION  VERSION    4. OPERATION l When you need to alert the pagers, just press “Pager Number” + “SEND” key. l The corresponding pager will be alerted. l When you return the alerted pager back to the charger base, it’ll stop alerting.   5. HOW TO USE  1) Franchise Restaurant, Hotel Restaurant       (1) Direction for Use         - For calling waiting guests  (2) Process         - If the guests are too many to provide enough seats to them, the staff located in front
of the door, hands out the pagers to the waiting guests.         -  The  waiting guests  do shopping, drinking in  the café,  seating on  a seat in the park and waiting for their turns with pager.         - When their turn comes, the waiter will page corresponding pager number.         - If his/her pager is paged, the guest immediately moves to the restaurant and guided   his/hers seat.    (3) Merits         - It’ll keep the restaurant from confusing their entrance.         - The waiter don’t need to use the microphone, the mood will be more quiet and high-quality.       - The waiting guest can utilize their waiting time usefully.  2) Café       (1) Direction for Use           - For calling waiting guests        (2) Process         - When the guest comes to the café and order, the waiter will provide the receipt and pager to him.         - The guest will take his seat and wait for his turn.     - When the drink is ready, the waiter will call the pager number.     - The guest goes to the pick up place and receives his drink and goes back to his seat.  (3) Merits     - It’ll eliminate the discomfort for waiting in front of the pick up place.     - The waiter doesn’t need to hurry and prepare the drink in turn.     - If utilizing multiple levels, it’ll eliminate the confusion in front of the store  3) Hospital       (1) Direction for Use         - For calling waiting patient or families        (2) Process         - When outpatient goes to the post after registering, the nurse will hand out the pager   to the patient.
      -  When turn  is  coming,  the nurse will  page  the patient and  the patient  will enter the medical office.    (3) Merits       - It’s needless to wait in front of the busy medical office and even there are not enough seats to sit on.         - It’ll speed up the entrance and reduce the waste time.  4) Pharmacy       (1) Direction for Use     - For calling waiting patient    (2) Process - After finishing their medical treatment, the patient will go to the pharmacy to receive   their medicine. - It may take lots of time to receive the medicine because of many waiting patients. - At this time, the staff will hand out the pager to the patient. - When turn is coming, the staff will page the patient and the patient will receive their   medicine.        (3) Merits         - While waiting their turn, the patients do not need to wait in the tiny waiting area.         - Instead of waiting in the pharmacy, the patient will go shopping, waiting in the café or park and it’ll serve the patient more comfortable.  5) Church       (1) Direction for Use         - For calling guardian        (2) Process         - When they go to worship, the parent will leave their children to the playroom.         - They receive the pager and enter to the chapel.         - If something is happened to the children during the worship, the playroom manager will page their parent.         -  Corresponding  parents  will  move  to  the  playroom  immediately,  and  check  whether their children are in trouble or not.
         (3) Merits         - It’ll keep the chapel quiet and solemn.         - During the worship, the parents have no worries about their children and concentrate   on their worship.         - The children can play in the playroom instead of their boring worship.  6) Car Wash     (1) Direction for Use         - For calling waiting guests        (2) Process         -  When  the  guest  comes  to  the  Car  Wash  Center  to  wash  their  car,  sometimes  they need some time to wait their turn. - Then, the staff in the Car Wash will hand out the pager to the waiting guest. - After finishing Car Wash, the staff will page corresponding car owner. - The guest who is paged will come to the Car Wash and return back his car.        (3) Merits         - It’ll reduce the time to waste in front of the Car Wash.         - The guest can do his business instead of waiting.         - It’ll keep the entrance of Car Wash not crowded.

Navigation menu