Leedarson Lighting 5AA-SS-ZC-H0 Temperature & Humidity Sensor User Manual V1

Download:
Mirror Download [FCC.gov]
Document ID	3395696
Application ID	6SVV3KzH8TjG7NQiLeEasg==
Document Description	User Manual_V1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.34kB (466805 bits)
Date Submitted	2017-05-18 00:00:00
Date Available	2017-05-19 00:00:00
Creation Date	2017-05-17 13:17:00
Producing Software	Acrobat Distiller 10.1.13 (Windows)
Document Lastmod	2017-05-17 13:17:00
Document Title	Microsoft Word - User Manual_V1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	djin

We build your success in IoT.
Temperature &
Humidity Sensor
Quick Start Guide
Meet Your LEEDARSON Temperature &
Humidity Sensor
The Temperature & Humidity Sensor lets you know the ambient temperature and humidity to trigger
different actions to make you more comfort.
Capabilities:

The LEEDARSON Temperature & Humidity Sensor is a universal ZigBee Temperature & Humidity
Sensor.

The LEEDARSON Temperature & Humidity Sensor detects temperature and humidity.

The LEEDARSON Temperature & Humidity Sensor is powered by two CR2032 batteries with 3
years battery life.

The LEEDARSON Temperature & Humidity Sensor is designed to be mounted on the surface.
Specification
Power Supply:
Battery
Operational Voltage:
3V
Battery Type:
CR2032*2
Battery Life:
3 years
0~60℃ accuracy: +‐ 1℃
Accuracy
‐10~50 ℃ accuracy: +‐ 1.5 ℃
0 ~ 100% RH accuracy: +‐ 6%
Radio Protocol:
ZigBee
Radio Frequency:
2.4GHz
Range:
100ft LOS
Operational Temperature:
‐10Ԩ ~ +50Ԩ
Standards Compliance:
FCC, CE
Dimensions (mm):
84.4(L)*63.4(W)*20.2(H)
How to connect a Temperature & Humidity Sensor
Use the button at the bottom of the sensor to include the Temperature & Humidity Sensor into the ZigBee
network.
Temperature & Humidity Sensor’s Inclusion Procedure:
1. Make sure the sensor is powered.
2. Press and hold the button(reset) for 3 second. This will cause a LED indicator to flash once per second.
3. Tap “Add device” in the LEEDARSON LDS App. The LDS App will search for the device.
4. The LED indicator will turn off to confirm a successful inclusion.
Button
(Reset)
Tip
When initially setting up the LEEDARSON Temperature & Humidity Sensor, it is recommended to
perform the setup task within 15 feet (4.5 meters) of the ZigBee Hub.
How to reset a Temperature & Humidity Sensor
Reset procedure deletes memory, including all information on the ZigBee network and the hub.
Temperature & Humidity Sensor’s Reset Procedure:
1. Make sure the sensor is powered.
2. Press and hold the button for 3 seconds.
3. Release the button.
4. LED indicator flashes once per second to confirm a successful reset.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained
between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : djin
Create Date                     : 2017:05:17 13:17:00+08:00
Modify Date                     : 2017:05:17 13:17:00+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.13 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - User Manual_V1
Creator                         : djin
Document ID                     : uuid:b8d45f39-75c4-4e4f-8558-9d028939f716
Instance ID                     : uuid:b5ae9865-4847-427f-9745-2fa31196fcf0
Page Count                      : 5

EXIF Metadata provided by EXIF.tools