Leica Geosystems CPD IIS01 photogrammetric and laser distance meter User Manual My

Leica Geosystems AG, CPD photogrammetric and laser distance meter My

Contents

  • 1. RFF-IIS01 UserMan
  • 2. RFF-IIS01 User Man

RFF-IIS01 UserMan

Leica BLK3D
Overview 2Technical data 3Instrument Set-up 7Reality Capture 11Laser 14Sketch & Document 17Organiser 21Care 22Warranty 23Safety instructions 24Leica BLK3D 1
OverviewOve rviewComponentsThe Leica BLK3D is a remote meas-urement tool with a class 2 laser. Itenables to measure distances within a pic-ture at any time. See chapter Technicaldata for scope of use.1. Measure2. Touch screen3. Back4. Home5. Measure6. Recents7. Camera8. USB port protection lid9. USB port10. ON/OFFHome screen1. Status bar2. Side menu3. Reality Capture4. Laser5. Sketch & Document6. New Project7. OrganiserLeica BLK3D 2
Technical dataTe c h n ica lda taDistance measurement (ISO 163331-1):Accuracy with favourable conditions: * ± 1.0 mm / 0.04 in ***Accuracy with unfavourable conditions: ** ± 2.0 mm / 0.08 in ***Range with favourable conditions: * 250 m / 820 ftRange with unfavourable conditions: **** 120 m / 394 ftSmallest unit displayed: 0.1 mm / 1/32 inX-Range Power Technology™: yesØ laser point at distances: 6 /30 / 60 mm (10 / 50 / 100 m)Tilt measurement:Measuring tolerance to laser beam: ***** ± 0.2°Measuring tolerance to housing: ***** ± 0.2°Range: 360°* applies for 100 % target reflectivity (white painted wall), low background illumination, 25 ºC** applies for 10 to 100 % target reflectivity, high background illumination, - 10 ºC to + 50 ºC*** Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m, to 0.20 mm/m between 30 m to100 m and to 0.30 mm/m for distances above 100 m**** applies for 100 % target reflectivity, background illumination of approximately 30'000 lux***** after user calibration. Additional angle related deviation of +/- 0.01° per degree up to +/-45° in each quadrant.Leica BLK3D 3
Technical dataP2P measurement with DST 360 (optional):Working range vertical sensor: -64° to > 90°Accuracy vertical sensor up to: +/- 0.1°Working range horizontal sensor: 360°Accuracy horizontal sensor up to: +/- 0.1°Tolerance P2P function at distances(combination of sensors and distance measuring) approx.:+/- 2 mm / 2 m+/- 5 mm / 5 m+/- 10 mm /10 mLevelling range: +/- 5°General:Dimensions (H x W x D): 180.6 x 77.6 x 27.1 mm (7.11 x 3.06 x 1.07 in)Weight (with rechargeable battery): 480 g / 17 ozTemperature range: Storage: -25 to 60 °C / -13 to 140 °FOperation: -10 to 50 °C / 14 to 122 °FCharging: 0 to 40 °C / 32 to 104 °FTripod adapter: supports 1/4-20 UNC screw adaptersLeica BLK3D 4
Technical dataTechnology:Operating system: Android 7 (Nougat)Processor (with integrated GPU): Snapdragon 820 QuadCore (2.2 GHz)RAM Memory: 4 GBReal-time processor: STM32F446Screen: 5.0" IPS, HD 720x1280 LCD capacitive multi-touch screen, chemically strengthened, brightness: 450 cd/m2Stereo camera: Pixels: 2 x 10 MP (15.8 cm diagonal base line)Field of view: 80°Focal length: 4.0 mm (22 mm in 35 mm equiv. in 1:1)Aperture: F3.0DISTO™ camera: Pixels: 2 MPField of view: 14°I/O: USB Type-C 1.0 for data transfer and charging (water-resistant), integrated speaker and microphoneKeyboard: Three physical buttons (Power, DIST, Camera), four touch buttons (Back, Home, Recents, DIST)Additional sensors: Compass, 3D accelerometer and 3D gyroscopeLaser class: 2Laser type: 635 nm, < 1 mWStorage:Internal storage: 64 GBSingle shots: 14000 picturesMulti shots: 5000 picturesLeica BLK3D 5
Technical dataCommunication:Bluetooth® Smart: Bluetooth v4.1 and v2.1Radiated power: 1.78 mW (BLE)Radiated power: 10.00 mW (BT classic)Frequency: 2402-2480 MHzWLAN: Standard: 802.11 b/g/n Radiated power: 6.31 mW Frequency: 2412-2462 MHzGPS: A-GPS and GLONASSPower Management:Battery: Rechargeable battery pack Li-Ion (3.80 V, 3880 mAh, 14.7 Wh) (included)Power Management: AC adaptor (input: 100-240 V AC) (included)External charger (input: 100-240 V AC) (optional)Charge time: < 3.5 h (with AC adaptor)< 5 h (with optional external charger)Operating time: Typical capture*: 4 h / 220 multi-shot capturesContinuous capture*: 2.5 h / 1000 single-shot capturesLaser measurements: 6.5 h / 9500 laser measurementsAuto power off: 3 h* Wi-Fi, Bluetooth® off, flash off, screen luminosity 50 %Leica BLK3D 6
Instrument Set-upIns trume n tSet-upIntroductionThe safety instructions (see SafetyInstructions) and the user manualshould be read through carefullybefore the product is used for thefirst time.The person responsible for theproduct must ensure that all usersunderstand these directions andadhere to them.The symbols used have the followingmeanings:WARNINGIndicates a potentially hazardous situationor an unintended use which, if not avoided,will result in death or serious injury.CAUTIONIndicates a potentially hazardous situationor an unintended use which, if not avoided,may result in minor injury and/or appre-ciable material, financial and envir-onmental damage.Important paragraphs which mustbe adhered to in practice as theyenable the product to be used in atechnically correct and efficient man-ner.Charging Li-Ion batteryCharge batteries when battery iconin status bar is flashing and beforeusing it for the first time. While char-ging, the device may heat up. This isnormal and should not affect thedevice’s lifespan or performance. Ifthe battery gets hotter than 40°C /104°F, the charger stops. At arecommended storage temperatureof -20°C to +30°C (-4°F to +86°F),batteries containing a 50% to 100%charge can be stored up to 1 year.After this storage period the bat-teries must be recharged. To saveenergy, unplug the charger when notin use.CAUTIONConnecting the charger improperly maycause serious damage to the device. Anydamage caused by misuse is not coveredby the warranty. Use only Leica-approvedchargers, batteries, and cables. Unap-proved chargers or cables can cause thebattery to explode or damage the device.Charge Li-Ion battery by USB porton the deviceUse the provided USB-C cable to chargethe BLK3D. Open the lid (1) and plug thecable into the port of the device (2). Plugthe end of the USB-C cable into one of theprovided adaptors. Select the appropriateone for your country. The device can alsobe charged connecting the USB-C cable tothe computer, but this takes more time. Ifthe device is connected to the computervia USB cable, you can download andupload data. During charging, the devicecannot be used for measuring or acquiringimages.Charge Li-Ion battery by USB char-ger (optional)Remove battery cover (1) by opening theslider (2) from left to right. Remove battery(3) and place it into charger (4). Insert theUSB cable into the port (5). Plug the char-ger into an electrical socket. Charging iscompleted when indicator light (6) turnsgreen.Leica BLK3D 7
Instrument Set-upSwitching ON/OFFSwitching ONPress ON/OFF button (1) to switch deviceON.Switching OFFPress ON/OFF button (1) for at least 2seconds to switch device OFF.UpdateConnect the BLK3D to the internet via WiFito get the latest updates.Using the touch screenIt is recommended to use fingers onthe touchscreen. Do not allow thetouch screen to come into contactwith other electrical devices. Elec-trostatic discharges can cause thetouch screen to malfunction. Do notallow the touch screen to get in con-tact with water. The touch screenmay malfunction in humid conditionsor when exposed to water. To avoiddamaging the touch screen, do nottap it with anything sharp or do notapply excessive pressure to it withyour fingertips.TapTap on the display to open an application orto make a selection.DragTouch and hold object and drag it to the tar-get position.Double tapDouble tap on image to zoom it. Double tapagain to return.Spread and pinchSpread two fingers apart on image tozoom. Pinch to zoom out.SwipeSwipe from left to right on the screen toscroll side Menu. Swipe downwards toscroll through options.Leica BLK3D 8
Instrument Set-upActivationSelect language for operating system.Copy your data from another device or setup as new.Connect to a WiFi network. Protect your device with a PIN or a pass-word (optional).Leica BLK3D 9
Instrument Set-upSettingsSelect “Settings” menu.Enter user data. Select measurement unit. Select language.Leica BLK3D 10
Reality CaptureRea lityCa p ture1. Take photo1Select "Reality Capture" function.2Choose between different settings:Timer: set a time delay for thephoto acquisition.Grid: show grid lines on display forbetter orientation.Flash: set the flash ON/OFF.Cancel: cancel last operation andgo back to home screen.Menu: show menu for main nav-igation.3Take a photo of the objects you wantto measure.11Leica BLK3D4To increase measurement accuracytake an additional photo from a slightlyother perspective.5Review photos. Press "Remove" todelete unwanted photos and "Keep" toexit Review mode.6Go to Measure mode (see 2. Measuredistances in photo).New: Cancel and create new "Real-ity Capture" scene.
Reality Capture2. Measure distances in photo1Select "Distance". Place fingers on theedges of the object you want to meas-ure. Spread fingers apart to enlarge theobject.2Tap a point on photo to start measuringprocess.Snap: Automatic snap to edges inphoto (activated by default).Delete: delete selected measuringpoint/line.Undo: erase last operation.3Tap the second point. The measureddistance is automatically shown abovethe line.4Tap on any measured point again toactivate Precise mode.Leica BLK3D 125Drag and spread to precisely centerthe point you want to measure in thehair cross.Done: confirm measuring point pos-ition.Next: jump the next measuringpoint for precise point selection.6Select Tools to add Tags, Rename orDelete scene, Move scene to a project(see Organiser), measure distanceswith Laser (see Laser).7Select a line and measure the distancewith Laser. Laser measurement isshown in brackets (see Laser).8Choose different options:New: exits Measure mode to takea new photo.Export: export the scene in JPG orPDF format.
Reality Capture3. Measure areas in photo1Select "Area". Place fingers on theedges of the object you want to meas-ure. Spread fingers apart to enlarge theobject.2Tap a point on photo to start measuringprocess.Snap: Automatic snap to edges inphoto (activated by default).Delete: delete selected measuringpoint/line.Undo: erase last operation.3Tap on next measuring points to com-plete the area. Tap on any measuredpoint again to activate Precise mode.Define more points to complete thearea. Tap on any point to activate Pre-cise mode.4Drag and spread to precisely centerthe point you want to measure in thehair cross.Done: confirm measuring point pos-ition.Next: jump the next measuringpoint for precise point selection.Leica BLK3D 135Select Tools to add Tags, Rename orDelete scene, Move scene to a project(see Organiser), measure distanceswith Laser (see Laser).6Select a line and measure the distancewith Laser. Laser measurement isshown in brackets (see Laser).7Choose different options:New: exits Measure mode to takea new photo.Export: export the scene in JPG orPDF format.
LaserLaserDistance14Leica BLK3D1Select "Laser" function.2Adjust measuring reference:Back: Distance is measured from the bot-tom of the device (default setting).Front: Distance is measured from the topof the device.Corner adaptor: Distance is measuredfrom the corner adapter (optional).3Select "Distance" from "Tools". Aimlaser at the target.4Press "Measure" button (seeOverview). Measured distance isshown at the bottom of the screen.5Select "Tools" to choose between dif-ferent measurements (Distance,Smart Horizontal, Area and Volume)and export measurement into a PDFreport.6Select "Calc" and choose between"Add" and "Subtract". Take anotherDistance measurement to Add/Sub-tract to/from the previous one.7Swipe right to left to delete a singlemeasurement, or select "Clear" to can-cel the measurement list.
LaserSmart Horizontal1Select "Smart Horizontal" from "Tools".Adjust measure reference if needed.2Aim active laser at target. Measurewith "Measure" button.3Vertical and horizontal distances arecalculated.TrackingLeica BLK3D 151Press or "Measure" button for 2seconds to activate tracking mode.2Press or "Measure" button again to fin-ish the measurement.
LaserArea1Select "Area" from "Tools". Adjustmeasure reference if needed.2Measure two distances (length andwidth) with "Measure" button.3Circumference and Area are auto-matically calculated.VolumeLeica BLK3D 161Select "Volue" from "Tools". Adjustmeasure reference if needed.2Measure three distances (length, widthand height) with "Measure" button.3Area, Wall Area, Circumference andVolume are automatically calculated.
Sketch & DocumentSk e tch &Do c u me n tSketch Plan (Advanced)17Leica BLK3D1Select "Sketch Plan" function from"Sketch & Document" menu.2Select "Line" or "Area" and draw bydragging or tapping.3Select a line and press "Laser" to meas-ure the length.4The sketch is automatically scaled.Calculated values are in brackets.5Alternatively select a line and press“Enter” to add length.6Select a line and press "Opening" toadd doors or windows.7Drag the opening to move it or selectthe distance from the wall and meas-ure it.8Select opening and press "Modify" tochange type and enter width andheight.
Sketch & Document9Switch to "3D" mode. A room heightcan be entered.10Switch to "Document" and select anempty placeholder to add Reality Cap-ture scenes.11Select a placeholder to review thescenes. Press the scene preview toopen it.12Select a placeholder to "Delete" or"Add" Reality Capture scenes.Leica BLK3D 18
Sketch & DocumentSmart Room (Advanced)1Select "Smart Room" function from"Sketch & Document" menu.2Keep screen oriented away from thewall while measuring.3Measure room clockwise/anti-clock-wise. Reverse measurements can betaken.4Room Height can be measured any-time.Leica BLK3D 195All measured values are displayed.After the last measurement press "Fin-ish".6The floorplan can be modified in"Sketch" mode (see Sketch Plan).
Sketch & DocumentMeasure Plan (Advanced)1Connect BLK3D to Leica DST 360adapter.2Select “Measure Plan” function from“Sketch & Document” menu.3Measure lines, areas or points. Followon-screen instructions.Measure Facade (Advanced)Leica BLK3D 201Connect BLK3D to Leica DST 360adapter.2Select “Measure Facade” functionfrom “Sketch & Document” menu.3Measure lines, areas or points on afacade. Follow on-screen instructions.
OrganiserOrga n ise r1Select "Organiser" function.2All the sketches and scenes are storedin four categories:1. All2. Projects3. Scenes4. Plans3Open the category "All". All the plans,Reality Capture scenes and projectsare stored.4Use the "Select" button to select anitem. Different actions are available:Export, Move to Project, Rename, Tagand Delete.21Leica BLK3D5Open the category "Projects". Pressthe "Project" button to create a new Pro-ject folder. Plans and scenes can bemoved in project folders.6Open the category "Scenes". All theReality Capture scenes are stored.Press "RC" button to add a new scene.7Open the category "Plans". All theplans, including plans with scenesattached, are stored.8Press "S&D" button to add a new plan.
CareCarelClean the device with a damp, soft cloth.lNever immerse the device in water.lNever use aggressive cleaning agents orsolvents.Leica BLK3D 22
WarrantyWarran tyInternational Limited WarrantyThe Leica BLK3D comes with a two year warranty fromLeica Geosystems AG. To receive an additional year war-ranty, the product must be registered on our website athttp://myworld.leica-geosystems.com within eightweeks of the purchase date.If the product is not registered, our two year warrantyapplies.More detailed information about the International LimitedWarranty can be found on the internet at: www.leica-geo-systems.com/internationalwarranty.Leica BLK3D 23
Safety instructionsSa fety ins truc tion sThe person responsible for the instrument mustensure that all users understand these directionsand adhere to them. The product is permitted touse for skilled persons only.Symbols usedThe symbols used have the following meanings:WARNINGIndicates a potentially hazardous situation or an unin-tended use which, if not avoided, will result in death orserious injury.CAUTIONIndicates a potentially hazardous situation or an unin-tended use which, if not avoided, may result in minorinjury and/or appreciable material, financial and envir-onmental damage.Important paragraphs which must be adhered to inpractice as they enable the product to be used in atechnically correct and efficient manner.Permitted uselCapture interactive imageslMeasure in interactive imageslMeasure distanceslTilt measurementlPoint to point measurementlData transfer with Bluetooth®/WLANl2D/3D CAD exportLeica BLK3D 24
Safety instructionsProhibited uselUsing the device for the first time without read-ing instructionslUsing the device outside the stated limits ofuse (see section Limits of use)lDeactivating safety systems and removingexplanatory and hazard labelslOpening of the equipment by using tools(screwdrivers, etc.)lUsing not approved accessories from othermanufacturerslDeliberate dazzling of third parties; also in thedarklUsing the device in surveying sites with inad-equate safeguardslDeliberate or irresponsible behaviour on scaf-folding, when using ladders, when measuringnear machines which are running or near partsof machines or installations which are unpro-tectedlAiming directly in the sunHazards in useWARNINGWatch out for erroneous measurements if the instrumentis defective or if it has been dropped or has been misusedor modified. Carry out periodic test measurements. Par-ticularly after the instrument has been subject to abnor-mal use, and before, during and after importantmeasurements.CAUTIONNever attempt to repair the product yourself. In case ofdamage, contact a local dealer.WARNINGChanges or modifications not expressly approved couldvoid the user´s authority to operate the equipment.CAUTIONOnly use chargers recommended by the manufacturer tocharge the batteries.Limits of useRefer to section Technical data. The device isdesigned for use in areas permanently habitable byhumans. Do not use the product in explosion haz-ardous areas or in aggressive environments.Leica BLK3D 25
Safety instructionsAreas of responsibilityResponsibilities of the manufacturer of the ori-ginal equipment:Leica Geosystems AGHeinrich-Wild-StrasseCH-9435 HeerbruggInternet: www.leica-geosystems.comThe company above is responsible for supplying theproduct, including the User Manual in a completely safecondition.The company above is not responsible for third partyaccessories.Responsibilities of the person in charge of theinstrument:lTo understand the safety instructions on theproduct and the instructions in the UserManual.lTo be familiar with local safety regulations relat-ing to accident prevention.lAlways prevent access to the product by unau-thorised personnel.DisposalCAUTIONFlat batteries must not be disposed of with householdwaste. Care for the environment and take them to the col-lection points provided in accordance with national orlocal regulations.The product must not be disposed with householdwaste. Dispose of the product appropriately inaccordance with the national regulations in force inyour country. Adhere to the national and countryspecific regulations.Product specific treatment and waste management canbe downloaded from our homepage.Electromagnetic Compatibility(EMC)WARNINGThe device conforms to the most stringent requirementsof the relevant standards and regulations. However, thepossibility of causing interference in other devices can-not be totally excluded.Leica BLK3D 26
Safety instructionsFCC statement (applicable in U.S.)This equipment has been tested and found to complywith the limits for a Class B digital instrument, pursuantto part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful inter-ference in a residential installation. This equipment gen-erates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio com-munications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or television recep-tion, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct theinterference by one or more of the following measures:lReorient or relocate the receiving antennalIncrease the separation between the equip-ment and the receiverlConnect the equipment into an outlet on a cir-cuit different from that to which the receiver isconnectedlConsult the dealer or an experienced radio/TVtechnician for helpThis device complies with part 15 of the FCC rules. Oper-ation is subjected to the following two conditions:lThis device may not cause harmful inter-ference, andlthis device must accept any interferencereceived, including interference that maycause undesired operation.FCC Radiation Exposure StatementThe radiated rf output power of the instrument is belowthe FCC radio frequency exposure limits for portabledevices according to KDB 447498.ISED Statement (applicable inCanada)This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following twoconditions:lThis device may not cause harmful inter-ference, andlthis device must accept any interference,including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d’IndustrieCanada applicables aux appareils radio exempts delicence. L’exploitation est autorisée aux deux conditionssuivantes :ll’appareil ne doit pas produire de brouillage;ll’appareil doit accepter tout brouillage radi-oélectrique subi, même si le brouillage est sus-ceptible d’en compromettre le fonctionnement.Radio Frequency (RF) Exposure ComplianceStatementThe radiated rf output power of the instrument is belowthe Health Canada's Safety Code 6 exclusion limit forportable devices (radiated element separation distancebetween the radiating element and user and/or bystanderis below 20 cm).Japanese Radio Law and JapaneseTelecommunications Business LawComplianceThis device is granted pursuant to the Japanese RadioLaw (電波法) and the Japanese TelecommunicationsBusiness Law (電気通信事業法).Leica BLK3D 27
Safety instructionsRegulatoryRegulatory information, certification, and compliancemarks are available on BLK3D. Go to Android Settings >About phone > Regulatory labels.Use of the product with Bluetooth®WARNINGElectromagnetic radiation can cause disturbances inother equipment, in installations (e.g. medical ones suchas pacemakers or hearing aids) and in aircraft. It can alsoaffect humans and animals.Precautions:Although this product conforms to the most stringentstandards and regulations, the possibility of harm topeople and animals cannot be totally excluded.lDo not use the product near petrol stations,chemical plants, in areas with a potentiallyexplosive atmosphere and where blastingtakes place.lDo not use the product near medical equip-ment.lDo not use the product in airplanes.lDo not use the product near your body forextended periods.Leica BLK3D 28
Safety instructionsLaser classificationThe device produces visible laser beams, which are emit-ted from the instrument: It is a Class 2 laser product inaccordance with:lIEC60825-1 : 2014 „Radiation safety of laserproducts“Laser Class 2 products:Do not stare into the laser beam or direct it towards otherpeople unnecessarily. Eye protection is normallyafforded by aversion responses including the blink reflex.WARNINGLooking directly into the beam with optical aids (e.g. bin-oculars, telescopes) can be hazardous.CAUTIONLooking into the laser beam may be hazardous to theeyes. Don't dazzle other individuals. Pay particular atten-tion to the direction of the laser beam when remotely oper-ating the product via an app or software. A measurementcould be triggered at any time.Wavelength655 nmMaximum radiant output power for classification0.95 mWPulse duration400 psPulse repetition frequency320 MHzBeam divergence0.16 x 0.6 mradLabellingSubject to change (drawings, descriptions and technicaldata) without prior notice.Leica BLK3D 29

RFF-IIS01 User Man

Leica BLK3D
Overview 2Technical data 3Instrument Set-up 7Reality Capture 11Laser 14Sketch & Document 17Organiser 21Care 22Warranty 23Safety instructions 24Leica BLK3D 1
OverviewOve rviewComponentsThe Leica BLK3D is a remote meas-urement tool with a class 2 laser. Itenables to measure distances within a pic-ture at any time. See chapter Technicaldata for scope of use.1. Measure2. Touch screen3. Back4. Home5. Measure6. Recents7. Camera8. USB port protection lid9. USB port10. ON/OFFHome screen1. Status bar2. Side menu3. Reality Capture4. Laser5. Sketch & Document6. New Project7. OrganiserLeica BLK3D 2
Technical dataTe c h n ica lda taDistance measurement (ISO 163331-1):Accuracy with favourable conditions: * ± 1.0 mm / 0.04 in ***Accuracy with unfavourable conditions: ** ± 2.0 mm / 0.08 in ***Range with favourable conditions: * 250 m / 820 ftRange with unfavourable conditions: **** 120 m / 394 ftSmallest unit displayed: 0.1 mm / 1/32 inX-Range Power Technology™: yesØ laser point at distances: 6 /30 / 60 mm (10 / 50 / 100 m)Tilt measurement:Measuring tolerance to laser beam: ***** ± 0.2°Measuring tolerance to housing: ***** ± 0.2°Range: 360°* applies for 100 % target reflectivity (white painted wall), low background illumination, 25 ºC** applies for 10 to 100 % target reflectivity, high background illumination, - 10 ºC to + 50 ºC*** Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m, to 0.20 mm/m between 30 m to100 m and to 0.30 mm/m for distances above 100 m**** applies for 100 % target reflectivity, background illumination of approximately 30'000 lux***** after user calibration. Additional angle related deviation of +/- 0.01° per degree up to +/-45° in each quadrant.Leica BLK3D 3
Technical dataP2P measurement with DST 360 (optional):Working range vertical sensor: -64° to > 90°Accuracy vertical sensor up to: +/- 0.1°Working range horizontal sensor: 360°Accuracy horizontal sensor up to: +/- 0.1°Tolerance P2P function at distances(combination of sensors and distance measuring) approx.:+/- 2 mm / 2 m+/- 5 mm / 5 m+/- 10 mm /10 mLevelling range: +/- 5°General:Dimensions (H x W x D): 180.6 x 77.6 x 27.1 mm (7.11 x 3.06 x 1.07 in)Weight (with rechargeable battery): 480 g / 17 ozTemperature range: Storage: -25 to 60 °C / -13 to 140 °FOperation: -10 to 50 °C / 14 to 122 °FCharging: 0 to 40 °C / 32 to 104 °FTripod adapter: supports 1/4-20 UNC screw adaptersLeica BLK3D 4
Technical dataTechnology:Operating system: Android 7 (Nougat)Processor (with integrated GPU): Snapdragon 820 QuadCore (2.2 GHz)RAM Memory: 4 GBReal-time processor: STM32F446Screen: 5.0" IPS, HD 720x1280 LCD capacitive multi-touch screen, chemically strengthened, brightness: 450 cd/m2Stereo camera: Pixels: 2 x 10 MP (15.8 cm diagonal base line)Field of view: 80°Focal length: 4.0 mm (22 mm in 35 mm equiv. in 1:1)Aperture: F3.0DISTO™ camera: Pixels: 2 MPField of view: 14°I/O: USB Type-C 1.0 for data transfer and charging (water-resistant), integrated speaker and microphoneKeyboard: Three physical buttons (Power, DIST, Camera), four touch buttons (Back, Home, Recents, DIST)Additional sensors: Compass, 3D accelerometer and 3D gyroscopeLaser class: 2Laser type: 635 nm, < 1 mWStorage:Internal storage: 64 GBSingle shots: 14000 picturesMulti shots: 5000 picturesLeica BLK3D 5
Technical dataCommunication:Bluetooth® Smart: Bluetooth v4.1 and v2.1Radiated power: 1.78 mW (BLE)Radiated power: 10.00 mW (BT classic)Frequency: 2402-2480 MHzWLAN: Standard: 802.11 b/g/n Radiated power: 6.31 mW Frequency: 2412-2462 MHzGPS: A-GPS and GLONASSPower Management:Battery: Rechargeable battery pack Li-Ion (3.80 V, 3880 mAh, 14.7 Wh) (included)Power Management: AC adaptor (input: 100-240 V AC) (included)External charger (input: 100-240 V AC) (optional)Charge time: < 3.5 h (with AC adaptor)< 5 h (with optional external charger)Operating time: Typical capture*: 4 h / 220 multi-shot capturesContinuous capture*: 2.5 h / 1000 single-shot capturesLaser measurements: 6.5 h / 9500 laser measurementsAuto power off: 3 h* Wi-Fi, Bluetooth® off, flash off, screen luminosity 50 %Leica BLK3D 6
Instrument Set-upIns trume n tSet-upIntroductionThe safety instructions (see SafetyInstructions) and the user manualshould be read through carefullybefore the product is used for thefirst time.The person responsible for theproduct must ensure that all usersunderstand these directions andadhere to them.The symbols used have the followingmeanings:WARNINGIndicates a potentially hazardous situationor an unintended use which, if not avoided,will result in death or serious injury.CAUTIONIndicates a potentially hazardous situationor an unintended use which, if not avoided,may result in minor injury and/or appre-ciable material, financial and envir-onmental damage.Important paragraphs which mustbe adhered to in practice as theyenable the product to be used in atechnically correct and efficient man-ner.Charging Li-Ion batteryCharge batteries when battery iconin status bar is flashing and beforeusing it for the first time. While char-ging, the device may heat up. This isnormal and should not affect thedevice’s lifespan or performance. Ifthe battery gets hotter than 40°C /104°F, the charger stops. At arecommended storage temperatureof -20°C to +30°C (-4°F to +86°F),batteries containing a 50% to 100%charge can be stored up to 1 year.After this storage period the bat-teries must be recharged. To saveenergy, unplug the charger when notin use.CAUTIONConnecting the charger improperly maycause serious damage to the device. Anydamage caused by misuse is not coveredby the warranty. Use only Leica-approvedchargers, batteries, and cables. Unap-proved chargers or cables can cause thebattery to explode or damage the device.Charge Li-Ion battery by USB porton the deviceUse the provided USB-C cable to chargethe BLK3D. Open the lid (1) and plug thecable into the port of the device (2). Plugthe end of the USB-C cable into one of theprovided adaptors. Select the appropriateone for your country. The device can alsobe charged connecting the USB-C cable tothe computer, but this takes more time. Ifthe device is connected to the computervia USB cable, you can download andupload data. During charging, the devicecannot be used for measuring or acquiringimages.Charge Li-Ion battery by USB char-ger (optional)Remove battery cover (1) by opening theslider (2) from left to right. Remove battery(3) and place it into charger (4). Insert theUSB cable into the port (5). Plug the char-ger into an electrical socket. Charging iscompleted when indicator light (6) turnsgreen.Leica BLK3D 7
Instrument Set-upSwitching ON/OFFSwitching ONPress ON/OFF button (1) to switch deviceON.Switching OFFPress ON/OFF button (1) for at least 2seconds to switch device OFF.UpdateConnect the BLK3D to the internet via WiFito get the latest updates.Using the touch screenIt is recommended to use fingers onthe touchscreen. Do not allow thetouch screen to come into contactwith other electrical devices. Elec-trostatic discharges can cause thetouch screen to malfunction. Do notallow the touch screen to get in con-tact with water. The touch screenmay malfunction in humid conditionsor when exposed to water. To avoiddamaging the touch screen, do nottap it with anything sharp or do notapply excessive pressure to it withyour fingertips.TapTap on the display to open an application orto make a selection.DragTouch and hold object and drag it to the tar-get position.Double tapDouble tap on image to zoom it. Double tapagain to return.Spread and pinchSpread two fingers apart on image tozoom. Pinch to zoom out.SwipeSwipe from left to right on the screen toscroll side Menu. Swipe downwards toscroll through options.Leica BLK3D 8
Instrument Set-upActivationSelect language for operating system.Copy your data from another device or setup as new.Connect to a WiFi network. Protect your device with a PIN or a pass-word (optional).Leica BLK3D 9
Instrument Set-upSettingsSelect “Settings” menu.Enter user data. Select measurement unit. Select language.Leica BLK3D 10
Reality CaptureRea lityCa p ture1. Take photo1Select "Reality Capture" function.2Choose between different settings:Timer: set a time delay for thephoto acquisition.Grid: show grid lines on display forbetter orientation.Flash: set the flash ON/OFF.Cancel: cancel last operation andgo back to home screen.Menu: show menu for main nav-igation.3Take a photo of the objects you wantto measure.11Leica BLK3D4To increase measurement accuracytake an additional photo from a slightlyother perspective.5Review photos. Press "Remove" todelete unwanted photos and "Keep" toexit Review mode.6Go to Measure mode (see 2. Measuredistances in photo).New: Cancel and create new "Real-ity Capture" scene.
Reality Capture2. Measure distances in photo1Select "Distance". Place fingers on theedges of the object you want to meas-ure. Spread fingers apart to enlarge theobject.2Tap a point on photo to start measuringprocess.Snap: Automatic snap to edges inphoto (activated by default).Delete: delete selected measuringpoint/line.Undo: erase last operation.3Tap the second point. The measureddistance is automatically shown abovethe line.4Tap on any measured point again toactivate Precise mode.Leica BLK3D 125Drag and spread to precisely centerthe point you want to measure in thehair cross.Done: confirm measuring point pos-ition.Next: jump the next measuringpoint for precise point selection.6Select Tools to add Tags, Rename orDelete scene, Move scene to a project(see Organiser), measure distanceswith Laser (see Laser).7Select a line and measure the distancewith Laser. Laser measurement isshown in brackets (see Laser).8Choose different options:New: exits Measure mode to takea new photo.Export: export the scene in JPG orPDF format.
Reality Capture3. Measure areas in photo1Select "Area". Place fingers on theedges of the object you want to meas-ure. Spread fingers apart to enlarge theobject.2Tap a point on photo to start measuringprocess.Snap: Automatic snap to edges inphoto (activated by default).Delete: delete selected measuringpoint/line.Undo: erase last operation.3Tap on next measuring points to com-plete the area. Tap on any measuredpoint again to activate Precise mode.Define more points to complete thearea. Tap on any point to activate Pre-cise mode.4Drag and spread to precisely centerthe point you want to measure in thehair cross.Done: confirm measuring point pos-ition.Next: jump the next measuringpoint for precise point selection.Leica BLK3D 135Select Tools to add Tags, Rename orDelete scene, Move scene to a project(see Organiser), measure distanceswith Laser (see Laser).6Select a line and measure the distancewith Laser. Laser measurement isshown in brackets (see Laser).7Choose different options:New: exits Measure mode to takea new photo.Export: export the scene in JPG orPDF format.
LaserLaserDistance14Leica BLK3D1Select "Laser" function.2Adjust measuring reference:Back: Distance is measured from the bot-tom of the device (default setting).Front: Distance is measured from the topof the device.Corner adaptor: Distance is measuredfrom the corner adapter (optional).3Select "Distance" from "Tools". Aimlaser at the target.4Press "Measure" button (seeOverview). Measured distance isshown at the bottom of the screen.5Select "Tools" to choose between dif-ferent measurements (Distance,Smart Horizontal, Area and Volume)and export measurement into a PDFreport.6Select "Calc" and choose between"Add" and "Subtract". Take anotherDistance measurement to Add/Sub-tract to/from the previous one.7Swipe right to left to delete a singlemeasurement, or select "Clear" to can-cel the measurement list.
LaserSmart Horizontal1Select "Smart Horizontal" from "Tools".Adjust measure reference if needed.2Aim active laser at target. Measurewith "Measure" button.3Vertical and horizontal distances arecalculated.TrackingLeica BLK3D 151Press or "Measure" button for 2seconds to activate tracking mode.2Press or "Measure" button again to fin-ish the measurement.
LaserArea1Select "Area" from "Tools". Adjustmeasure reference if needed.2Measure two distances (length andwidth) with "Measure" button.3Circumference and Area are auto-matically calculated.VolumeLeica BLK3D 161Select "Volue" from "Tools". Adjustmeasure reference if needed.2Measure three distances (length, widthand height) with "Measure" button.3Area, Wall Area, Circumference andVolume are automatically calculated.
Sketch & DocumentSk e tch &Do c u me n tSketch Plan (Advanced)17Leica BLK3D1Select "Sketch Plan" function from"Sketch & Document" menu.2Select "Line" or "Area" and draw bydragging or tapping.3Select a line and press "Laser" to meas-ure the length.4The sketch is automatically scaled.Calculated values are in brackets.5Alternatively select a line and press“Enter” to add length.6Select a line and press "Opening" toadd doors or windows.7Drag the opening to move it or selectthe distance from the wall and meas-ure it.8Select opening and press "Modify" tochange type and enter width andheight.
Sketch & Document9Switch to "3D" mode. A room heightcan be entered.10Switch to "Document" and select anempty placeholder to add Reality Cap-ture scenes.11Select a placeholder to review thescenes. Press the scene preview toopen it.12Select a placeholder to "Delete" or"Add" Reality Capture scenes.Leica BLK3D 18
Sketch & DocumentSmart Room (Advanced)1Select "Smart Room" function from"Sketch & Document" menu.2Keep screen oriented away from thewall while measuring.3Measure room clockwise/anti-clock-wise. Reverse measurements can betaken.4Room Height can be measured any-time.Leica BLK3D 195All measured values are displayed.After the last measurement press "Fin-ish".6The floorplan can be modified in"Sketch" mode (see Sketch Plan).
Sketch & DocumentMeasure Plan (Advanced)1Connect BLK3D to Leica DST 360adapter.2Select “Measure Plan” function from“Sketch & Document” menu.3Measure lines, areas or points. Followon-screen instructions.Measure Facade (Advanced)Leica BLK3D 201Connect BLK3D to Leica DST 360adapter.2Select “Measure Facade” functionfrom “Sketch & Document” menu.3Measure lines, areas or points on afacade. Follow on-screen instructions.
OrganiserOrga n ise r1Select "Organiser" function.2All the sketches and scenes are storedin four categories:1. All2. Projects3. Scenes4. Plans3Open the category "All". All the plans,Reality Capture scenes and projectsare stored.4Use the "Select" button to select anitem. Different actions are available:Export, Move to Project, Rename, Tagand Delete.21Leica BLK3D5Open the category "Projects". Pressthe "Project" button to create a new Pro-ject folder. Plans and scenes can bemoved in project folders.6Open the category "Scenes". All theReality Capture scenes are stored.Press "RC" button to add a new scene.7Open the category "Plans". All theplans, including plans with scenesattached, are stored.8Press "S&D" button to add a new plan.
CareCarelClean the device with a damp, soft cloth.lNever immerse the device in water.lNever use aggressive cleaning agents orsolvents.Leica BLK3D 22
WarrantyWarran tyInternational Limited WarrantyThe Leica BLK3D comes with a two year warranty fromLeica Geosystems AG. To receive an additional year war-ranty, the product must be registered on our website athttp://myworld.leica-geosystems.com within eightweeks of the purchase date.If the product is not registered, our two year warrantyapplies.More detailed information about the International LimitedWarranty can be found on the internet at: www.leica-geo-systems.com/internationalwarranty.Leica BLK3D 23
Safety instructionsSa fety ins truc tion sThe person responsible for the instrument mustensure that all users understand these directionsand adhere to them. The product is permitted touse for skilled persons only.Symbols usedThe symbols used have the following meanings:WARNINGIndicates a potentially hazardous situation or an unin-tended use which, if not avoided, will result in death orserious injury.CAUTIONIndicates a potentially hazardous situation or an unin-tended use which, if not avoided, may result in minorinjury and/or appreciable material, financial and envir-onmental damage.Important paragraphs which must be adhered to inpractice as they enable the product to be used in atechnically correct and efficient manner.Permitted uselCapture interactive imageslMeasure in interactive imageslMeasure distanceslTilt measurementlPoint to point measurementlData transfer with Bluetooth®/WLANl2D/3D CAD exportLeica BLK3D 24
Safety instructionsProhibited uselUsing the device for the first time without read-ing instructionslUsing the device outside the stated limits ofuse (see section Limits of use)lDeactivating safety systems and removingexplanatory and hazard labelslOpening of the equipment by using tools(screwdrivers, etc.)lUsing not approved accessories from othermanufacturerslDeliberate dazzling of third parties; also in thedarklUsing the device in surveying sites with inad-equate safeguardslDeliberate or irresponsible behaviour on scaf-folding, when using ladders, when measuringnear machines which are running or near partsof machines or installations which are unpro-tectedlAiming directly in the sunHazards in useWARNINGWatch out for erroneous measurements if the instrumentis defective or if it has been dropped or has been misusedor modified. Carry out periodic test measurements. Par-ticularly after the instrument has been subject to abnor-mal use, and before, during and after importantmeasurements.CAUTIONNever attempt to repair the product yourself. In case ofdamage, contact a local dealer.WARNINGChanges or modifications not expressly approved couldvoid the user´s authority to operate the equipment.CAUTIONOnly use chargers recommended by the manufacturer tocharge the batteries.Limits of useRefer to section Technical data. The device isdesigned for use in areas permanently habitable byhumans. Do not use the product in explosion haz-ardous areas or in aggressive environments.Leica BLK3D 25
Safety instructionsAreas of responsibilityResponsibilities of the manufacturer of the ori-ginal equipment:Leica Geosystems AGHeinrich-Wild-StrasseCH-9435 HeerbruggInternet: www.leica-geosystems.comThe company above is responsible for supplying theproduct, including the User Manual in a completely safecondition.The company above is not responsible for third partyaccessories.Responsibilities of the person in charge of theinstrument:lTo understand the safety instructions on theproduct and the instructions in the UserManual.lTo be familiar with local safety regulations relat-ing to accident prevention.lAlways prevent access to the product by unau-thorised personnel.DisposalCAUTIONFlat batteries must not be disposed of with householdwaste. Care for the environment and take them to the col-lection points provided in accordance with national orlocal regulations.The product must not be disposed with householdwaste. Dispose of the product appropriately inaccordance with the national regulations in force inyour country. Adhere to the national and countryspecific regulations.Product specific treatment and waste management canbe downloaded from our homepage.Electromagnetic Compatibility(EMC)WARNINGThe device conforms to the most stringent requirementsof the relevant standards and regulations. However, thepossibility of causing interference in other devices can-not be totally excluded.Leica BLK3D 26
Safety instructionsFCC statement (applicable in U.S.)This equipment has been tested and found to complywith the limits for a Class B digital instrument, pursuantto part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful inter-ference in a residential installation. This equipment gen-erates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio com-munications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or television recep-tion, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct theinterference by one or more of the following measures:lReorient or relocate the receiving antennalIncrease the separation between the equip-ment and the receiverlConnect the equipment into an outlet on a cir-cuit different from that to which the receiver isconnectedlConsult the dealer or an experienced radio/TVtechnician for helpThis device complies with part 15 of the FCC rules. Oper-ation is subjected to the following two conditions:lThis device may not cause harmful inter-ference, andlthis device must accept any interferencereceived, including interference that maycause undesired operation.FCC Radiation Exposure StatementThe radiated rf output power of the instrument is belowthe FCC radio frequency exposure limits for portabledevices according to KDB 447498.ISED Statement (applicable inCanada)This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following twoconditions:lThis device may not cause harmful inter-ference, andlthis device must accept any interference,including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d’IndustrieCanada applicables aux appareils radio exempts delicence. L’exploitation est autorisée aux deux conditionssuivantes :ll’appareil ne doit pas produire de brouillage;ll’appareil doit accepter tout brouillage radi-oélectrique subi, même si le brouillage est sus-ceptible d’en compromettre le fonctionnement.Radio Frequency (RF) Exposure ComplianceStatementThe radiated rf output power of the instrument is belowthe Health Canada's Safety Code 6 exclusion limit forportable devices (radiated element separation distancebetween the radiating element and user and/or bystanderis below 20 cm).Japanese Radio Law and JapaneseTelecommunications Business LawComplianceThis device is granted pursuant to the Japanese RadioLaw (電波法) and the Japanese TelecommunicationsBusiness Law (電気通信事業法).Leica BLK3D 27
Safety instructionsRegulatoryRegulatory information, certification, and compliancemarks are available on BLK3D. Go to Android Settings >About phone > Regulatory labels.Use of the product with Bluetooth®WARNINGElectromagnetic radiation can cause disturbances inother equipment, in installations (e.g. medical ones suchas pacemakers or hearing aids) and in aircraft. It can alsoaffect humans and animals.Precautions:Although this product conforms to the most stringentstandards and regulations, the possibility of harm topeople and animals cannot be totally excluded.lDo not use the product near petrol stations,chemical plants, in areas with a potentiallyexplosive atmosphere and where blastingtakes place.lDo not use the product near medical equip-ment.lDo not use the product in airplanes.lDo not use the product near your body forextended periods.Leica BLK3D 28
Safety instructionsLaser classificationThe device produces visible laser beams, which are emit-ted from the instrument: It is a Class 2 laser product inaccordance with:lIEC60825-1 : 2014 „Radiation safety of laserproducts“Laser Class 2 products:Do not stare into the laser beam or direct it towards otherpeople unnecessarily. Eye protection is normallyafforded by aversion responses including the blink reflex.WARNINGLooking directly into the beam with optical aids (e.g. bin-oculars, telescopes) can be hazardous.CAUTIONLooking into the laser beam may be hazardous to theeyes. Don't dazzle other individuals. Pay particular atten-tion to the direction of the laser beam when remotely oper-ating the product via an app or software. A measurementcould be triggered at any time.Wavelength655 nmMaximum radiant output power for classification0.95 mWPulse duration400 psPulse repetition frequency320 MHzBeam divergence0.16 x 0.6 mradLabellingSubject to change (drawings, descriptions and technicaldata) without prior notice.Leica BLK3D 29

Navigation menu