Leica Geosystems CPD LD2BT Leica Disto D1 User Manual My

Leica Geosystems AG, CPD Leica Disto D1 My

Contents

15_Leica Disto D1 UserMan

Leica DISTOTM D1The original laser distance meter
Overview 2Technical data 3Instrument Set-up 5Operations 11Message Codes 14Care 15Warranty 16Safety instructions 17Leica DISTO™ D1 1
OverviewOve rviewThe Leica DISTO™ is a laser distance meter oper-ating with a class 2 laser. See chapter Technicaldata for scope of use.1Display2ON/ Measure3Clear/ OFFLeica DISTO™ D1 2
Technical dataTe c h n ica lda taLeica DISTO™ D1 3GeneralAccuracy with favourable conditions * 2 mm / 0.08 in ***Accuracy with unfavourable conditions ** 3 mm / 1/8" ***Range with favourable conditions * 0.05 - 40 m / 0.16 - 120 ft ***Range with unfavourable conditions ** 0.05 - 30 m / 0.16 - 100 ft ***Smallest unit displayed 0.1 mm / 1/32 inLaser class 2Laser type 635 nm, <1 mWø laser point | at distances 6 /30 /60 mm | 10/ 50/ 100 mProtection class IP54 (dust- and splash water protected)Auto. laser switch off after 90 sAuto. power switch off after 180 sBluetooth® Smart Bluetooth® v4.0Range of Bluetooth® Smart <10mBattery durability (2 x AAA) up to 10000 measurementsDimension (H x D x W) 115 x 43.5 x 23.5 mm | 4.53 x 1.71 x 0.93 inWeight (with batteries) 87 g/ 3.07 ozTemperature range Storage | Operation -25 to 70°C/ -13 to 158°F | -0 to 40°C/ 32 to 104°F* favourable conditions are: white and diffuse reflecting target (white painted wall), low background illumination and moderate temperatures.** unfavourable conditions are: targets with lower or higher reflectivity or high background illumination or temperatures at the upper or lower end of the specified temperature range.*** Tolerances apply from 0.05 m to 5 m with a confidence level of 95%.With favourable conditions the tolerance may deteriorate by 0.10 mm/m for distances above 5 m.With unfavourable conditions the tolerance may deteriorate by 0.15 mm/m for distances above 5 m.
Technical dataFunctionsDistance measuring yesPermanent measuring yesBeep yesIlluminated display yesBluetooth® Smart yesLeica DISTO™ D1 4
Instrument Set-upIns trume n tSet-upIntroductionThe safety instructions (see SafetyInstructions) and the user manualshould be read through carefullybefore the product is used for the firsttime.The person responsible for theproduct must ensure that all usersunderstand these directions andadhere to them.The symbols used have the followingmeanings:WARNINGIndicates a potentially hazardous situ-ation or an unintended use which, ifnot avoided, will result in death or ser-ious injury.CAUTIONIndicates a potentially hazardous situ-ation or an unintended use which, ifnot avoided, may result in minor injuryand/or appreciable material, financialand environmental damage.Important paragraphs whichmust be adhered to in practiceas they enable the product to beused in a technically correct andefficient manner.5Leica DISTO™ D1
Instrument Set-upInsert batteriesTo ensure a reliable use, we recom-mend using high quality Alkaline bat-teries. Change batteries whenbattery symbol is flashing.Leica DISTO™ D1 6
Instrument Set-upSwitching ON/OFFDevice is turned OFF.Leica DISTO™ D1 7
Instrument Set-upClearUndo last action. Leave actual function, go to defaultoperation mode.Leica DISTO™ D1 8
Instrument Set-upMessage CodesIf the message "i" appears witha number, observe the instruc-tions in Message Codes section.Example:Leica DISTO™ D1 9
Instrument Set-upSettingsPress both keys simultaneousley. Switch between the following units:0.000 m0'00" 1/160.0000 m0.000 in0.00 ft0 in 1/16Leica DISTO™ D1 10
OperationsOpe rationsMeasuring single distanceAim active laser at target.Target surfaces: Measuringerrors can occur when meas-uring to colourless liquids, glass,styrofoam or permeable sur-faces or when aiming at highgloss surfaces. Against darksurfaces the measuring timeincreases.11Leica DISTO™ D1
OperationsPermanent measuringThe last value measured is displayedin the main line.Stops permanent measuring.Leica DISTO™ D1 12
OperationsBluetooth® SmartDISTO™ sketch. Use App forBluetooth® data transfer.Bluetooth® Smart is always act-ive when the device is switchedon. Connect the device withyour smart-phone, tablet,laptop.. Measurement valueswill be transferred automaticallyright after a measurement. Theefficient and innovativeBluetooth® Smart module (withthe new Bluetooth® standardV4.0) works together with allBluetooth® Smart Readydevices. All other Bluetooth®devices do not support theenergy saving Bluetooth®Smart Module, which is integ-rated in the device.We provide no warranty for freeDISTO™ software and offer nosupport for it. We accept no liab-ility whatsoever arising from theuse of the free software and weare not obliged to provide cor-rections nor to developupgrades. A wide range of com-mercial software can be foundon our homepage. Apps forAndroid® or iOS can be found inspecial internet shops. For moredetails, see our homepage.Leica DISTO™ D1 13
Message CodesMes s a g e C o d e sLeica DISTO™ D1 14No. Cause Correction204 Calculation error Perform measurement again.220 Hardware error Contact your dealer240 Data transfer error Connect device and repeat procedure252 Temperature too high Let device cool down.253 Temperature too low Warm device up.255 Received signal too weak, measuring time too long Change target surface (e.g. white paper).256 Received signal too high Change target surface (e.g. white paper) .257 Too much background light Shadow target area.* If other message codes are displayed frequently even the instrument has been switched off and on, please contact your dealer.
CareCarelClean the device with a damp, soft cloth.lNever immerse the device in water.lNever use aggressive cleaning agents orsolvents.Leica DISTO™ D1 15
WarrantyWarra n tyWarranty under PROTECT by LeicaGeosystemsLifetime Manufacturer´s WarrantyWarranty coverage for the entire usage time ofthe product under PROTECT according to LeicaGeosystems International Limited Warranty andPROTECT General Terms & Conditions set outunder www.leica-geosystems.com. Free ofcharge repair or replacement of all products orany parts under PROTECT that suffer defects asa result of faults in materials or workmanship.3 Years No CostAdditional services should the product underPROTECT become defective and require ser-vicing under normal conditions of use, asdescribed in the user manual, at no additionalcharge.To receive the "3 Years No Cost" period, theproduct under PROTECT must be registered atmyworld.leica-geosystems.com within 8 weeks ofthe purchase date. If the product underPROTECT is not registered, a "2 years No Cost"period applies.Leica DISTO™ D1 16
Safety instructionsSa fety ins tru c tio n sThe person responsible for the instrumentmust ensure that all users understand thesedirections and adhere to them.Leica DISTO™ D1 17
Safety instructionsSymbols usedThe symbols used have the following meanings:WARNINGIndicates a potentially hazardous situation or anunintended use which, if not avoided, will result indeath or serious injury.CAUTIONIndicates a potentially hazardous situation or anunintended use which, if not avoided, may result inminor injury and/or appreciable material, financialand environmental damage.Important paragraphs which must beadhered to in practice as they enable theproduct to be used in a technically correctand efficient manner.Leica DISTO™ D1 18
Safety instructionsPermitted uselMeasuring distanceslData transfer with Bluetooth®Leica DISTO™ D1 19
Safety instructionsProhibited uselUsing the product without instructionlUsing outside the stated limitslDeactivation of safety systems andremoval of explanatory and hazard labelslOpening of the equipment by using tools(screwdrivers, etc.)lUse of accessories from other man-ufacturers without express approvallCarrying out modification or conversionof the productlDeliberate dazzling of third parties; also inthe darklInadequate safeguards at the surveyingsite (e.g. when measuring on roads, con-struction sites, etc.)lDeliberate or irresponsible behaviour onscaffolding, when using ladders, whenmeasuring near machines which are run-ning or near parts of machines or install-ations which are unprotectedlAiming directly in the sunLeica DISTO™ D1 20
Safety instructionsHazards in useWARNINGWatch out for erroneous measurements if theinstrument is defective or if it has been dropped orhas been misused or modified. Carry out periodictest measurements. Particularly after the instru-ment has been subject to abnormal use, andbefore, during and after important meas-urements.CAUTIONNever attempt to repair the product yourself. Incase of damage, contact a local dealer.WARNINGChanges or modifications not expressly approvedcould void the user´s authority to operate theequipment.Leica DISTO™ D1 21
Safety instructionsLimits of useRefer to section Technical data. The deviceis designed for use in areas permanently hab-itable by humans. Do not use the product inexplosion hazardous areas or in aggressiveenvironments.Leica DISTO™ D1 22
Safety instructionsAreas of responsibilityResponsibilities of the manufacturer of the ori-ginal equipment:Leica Geosystems AGHeinrich-Wild-StrasseCH-9435 HeerbruggInternet: www.leica-geosystems.comThe company above is responsible for supplyingthe product, including the User Manual in a com-pletely safe condition.The company above is not responsible for thirdparty accessories.Responsibilities of the person in charge of theinstrument:lTo understand the safety instructions onthe product and the instructions in theUser Manual.lTo be familiar with local safety regulationsrelating to accident prevention.lAlways prevent access to the product byunauthorised personnel.Leica DISTO™ D1 23
Safety instructionsDisposalCAUTIONFlat batteries must not be disposed of with house-hold waste. Care for the environment and takethem to the collection points provided in accord-ance with national or local regulations.The product must not be disposed with householdwaste. Dispose of the product appropriately inaccordance with the national regulations in forcein your country. Adhere to the national and coun-try specific regulations.Product specific treatment and waste man-agement can be downloaded from ourhomepage.Leica DISTO™ D1 24
Safety instructionsElectromagnetic Compatibility(EMC)WARNINGThe device conforms to the most stringent require-ments of the relevant standards and regulations.However, the possibility of causing interference inother devices cannot be totally excluded.Japanese Radio Law ComplianceThis device is granted pursuant to the JapaneseRadio Law 電波法. This device should not bemodified otherwise the granted designation num-ber will become invalid.Leica DISTO™ D1 25
Safety instructionsFCC statement (applicable in U.S.)This equipment has been tested and found to com-ply with the limits for a Class B digital instrument,pursuant to part 15 of the FCC rules. These limitsare designed to provide reasonable protectionagainst harmful interference in a residential install-ation. This equipment generates, uses and canradiate radio frequency energy and, if not installedand used in accordance with the instructions, maycause harmful interference to radio com-munications.However, there is no guarantee that interferencewill not occur in a particular installation. If this equip-ment does cause harmful interference to radio ortelevision reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference byone or more of the following measures:lReorient or relocate the receivingantennalIncrease the separation between theequipment and the receiverlConnect the equipment into an outlet ona circuit different from that to which thereceiver is connectedlConsult the dealer or an experienced radi-o/TV technician for helpThis device complies with part 15 of the FCCrules. Operation is subjected to the following twoconditions:lThis device may not cause harmful inter-ference, andlthis device must accept any interferencereceived, including interference that maycause undesired operation.FCC Radiation Exposure StatementThe radiated rf output power of the instrument isbelow the FCC radio frequency exposure limits forportable devices according to KDB 447498.Leica DISTO™ D1 26
Safety instructionsISED Statement (applicable inCanada)This device complies with Industry Canada'slicense-exempt RSSs. Operation is subject to thefollowing two conditions:lThis device may not cause harmful inter-ference, andlthis device must accept any interference,including interference that may causeundesired operation of the device.Radio Frequency (RF) Exposure ComplianceStatementThe radiated rf output power of the instrument isbelow the Health Canada's Safety Code 6 exclu-sion limit for portable devices (radiated elementseparation distance between the radiating ele-ment and user and/or bystander is below 20 cm).Leica DISTO™ D1 27
Safety instructionsUse of the product with Bluetooth®WARNINGElectromagnetic radiation can cause disturbancesin other equipment, in installations (e.g. medicalones such as pacemakers or hearing aids) and inaircraft. It can also affect humans and animals.Precautions:Although this product conforms to the most strin-gent standards and regulations, the possibility ofharm to people and animals cannot be totallyexcluded.lDo not use the product near petrol sta-tions, chemical plants, in areas with apotentially explosive atmosphere andwhere blasting takes place.lDo not use the product near medicalequipment.lDo not use the product in airplanes.lDo not use the product near your bodyfor extended periods.Leica DISTO™ D1 28
Safety instructionsLaser classificationThe device produces visible laser beams, whichare emitted from the instrument: It is a Class 2laser product in accordance with:lIEC60825-1 : 2014 „Radiation safety oflaser products“Laser Class 2 products:Do not stare into the laser beam or direct ittowards other people unnecessarily. Eye pro-tection is normally afforded by aversion responsesincluding the blink reflex.WARNINGLooking directly into the beam with optical aids(e.g. binoculars, telescopes) can be hazardous.CAUTIONLooking into the laser beam may be hazardous tothe eyes.Wavelength620 - 690 nmMaximum radiant output power for classification< 1 mWPulse duration> 400 psPulse repetition frequency320 MHzBeam divergence0.16 x 0.6 mradLeica DISTO™ D1 29
Safety instructionsLabellingSubject to change (drawings, descriptions andtechnical data) without prior notice.Leica DISTO™ D1 30

Navigation menu