Leica Cm1950 Users Manual CM1900_UV_de_1v0

2015-02-02

• 1.1 Symbols Used in This Manual and Their Meaning 6
• 1.3 Designated Use
• 1.4 Instrument Type
• 2. Safety and Design 7
• 2.1 General Safety Instructions
• 2.2 Unpacking and Installation
• 2.3 Safety Features
• 2.4 Securing/Locking the Handwheel
• 2.5 Cleaning, Disinfection - Turning the Instrument Back On
• 2.6 Handling Specimens - Defrosting
• 2.7 Removal of the Microtome
• 2.8 Maintenance
• 3. Technical Data 14
• 4. Standard Delivery
• 5. General Overview
• 5.1 Control Panel Fields and Cryostat Chamber
• 6. Installation
• 6.1 Site Requirements
• 6.2 Transport to the Site
• 6.3 Assembling the Handwheel, Centering the Handwheel (Optional)
• 6.3.1 Locking/Unlocking the Handwheel
• 6.3.2 Installing the Footswitch Dummy (Instruments with Cutting Motor)
• 6.4 Connection to Power Supply System
• 6.5 Installing Accessories/Inserting Chamber Accessories
• 6.5.1 Installing the Adjustable Footrest (Optional)
• 6.5.2 Installing the Storage Systems (Optional)
• 6.5.4 Inserting the Section Waste Tray
• 6.5.3 Shelf, Movable (Optional)
• 6.5.5 Installing the Heat Conductor Block, Stationary (Optional)
• 6.5.6 Installing the Knife/Blade Holder and Adjusting the Clearance Angle
• 7. Instrument Controls 30
• 7.1 Control Panel Fields on the CM1950 - Control Panel Field 1
• Control Panel Field 2 - Electric Coarse Feed, Sectioning and Trimming Thickness Display
• Control panel 3 - Motorized sectioning (optional)
• 8. Working with the Instrument
• 8.1 Preparing Cutting Tools, Specimen Discs and Preparation Aids
• 8.2 Turning the Instrument On
• 8.3 Configuring the Parameters
• 8.4 Working with the Precooled Cryostat
• 8.4.1 Preparatory Work
• 8.4.2 Trimming with Extraction - Anti-roll Guide Installed
• 8.4.3 Cutting with Extraction - Anti-roll Guide Installed
• 9. Troubleshooting
• 9.1 Problems During Work
• 10. Temperature Selection Chart (in minus °C)
• 11. Optional Accessories 53
• 11.1 Ordering Information
• 12. Maintenance and Cleaning
• 12.1 General Maintenance
• 12.2 Changing Fuses
• 12.3 Replacement of the Lamp/UVC Lamp
• 13. Decontamination Certificate (master)
• 14. EC Declaration of Conformity 72
• 15. Warranty and Service