Lelux Electronics S615 Wireless Security Alert System User Manual 615 homesafe Alarm manual
Lelux Electronics Ltd Wireless Security Alert System 615 homesafe Alarm manual
User Manual
Wireless Security Alert System Model:615 FEATURES • Including wireless PIR(passive infrared) sensor & receiver • Powerful outdoor weather-PIR sensor detects motion sends a wireless signal to receiver turn on chime • Wireless RF transmission up to 60~90 meters • PIR sensor detection range up to 8 meters, detection angle up to 30 degree • Sound Hi/Off/Low switch of receiver • PIR sensor 9V battery operation (not included) • Receiver 3 "C" size batteries operation (not included) and compatible with AC adaptor (not included) • Battery low indicator LED for PIR sensor & receiver • No wiring, easy to installs OPERATION 1. Remove the screw of PIR sensor unit and Receiver unit from battery cover, and open the battery door.(Fig.1) 4. Please ensure to place the PIR sensor unit at least three feet high above the ground. 5. High/Off/Low switch of receiver Turn the switch to High position, the unit will standby to Chime mode, when PIR sensor detected trigger, will sound door chime and the led will light up. You can turn HI/LOW switch to select door chime sound volume. 6. To test the PIR sensor unit detection area After selecting a location for installing of the unit you can turn the switch to Chime and wait for 30 seconds for "WARM-UP". Then you try walking in front of the unit. When the unit detects motion, the chime will sound. There will be no chime sound if you walk beyond the detection range. By testing the detection range, you can adjust the location of sensor angle for best coverage. Turn the chime off after your test. 7. Battery low indicator A) PIR sensor When PIR sensor batteries goes low, the LED will lighting to indicate the low battery. Please replace the new battery. B) Receiver When receiver batteries goes low, the LED of the middle will lighting to indicate the low battery. Please replace the new battery. 8. Power adapter (not included) for receiver unit with output 6V DC, 200mA female plug, center ( + ) positive can be applied to the DC jack for long time use. (Fig. 1) 2. Install an alkaline 9V batteries (not included) for PIR sensor, 3x1.5 "C-size" batteries for receiver to the battery compartment make sure install with correct polarity. (Fig. 2) (Fig. 2) 3. Hang the PIR sensor at the entrance of your driveway (such as on a mailbox, on a tree or on a ground stake). You may also place the PIR sensor on your garage, near the front entrance or rear door. Any movement nearby will transmit a signal to the receiver chime unit triggering it to signal the chime.(Fig.3) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID: NS3S615 Fig.3 -1- size:145x205mm p/n:610-615XX-000R -2- 610-615XX-000R
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Creator Tool : Adobe Illustrator CS5 Create Date : 2014:11:19 09:06:24+08:00 Modify Date : 2014:11:19 09:06:24+08:00 Metadata Date : 2014:11:19 09:06:24+08:00 Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 18823 bytes, use -b option to extract) N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 360.344586 Max Page Size H : 276.250494 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-ItalicMT, Arial-BoldMT, AdobeSongStd-Light, SIL-Hei-Med-Jian Font Family : Arial, Arial, Arial, Adobe 宋体 Std, SIL Hei-Med-Jian-GBpc-EUC-H Font Face : Regular, Italic, Bold, L, Hei-Med-Jian-GBpc-EUC-H Font Type : Open Type, Open Type, Open Type, Open Type, Unknown Font Version : Version 3.00, Version 2.90, Version 3.00, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 5.010;PS 5.005;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False Font File Name : ARIAL.TTF, ARIALI.TTF, ARIALBD.TTF, AdobeSongStd-Light.otf, AdobeHeitiStd-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: [Registration] 1 Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 100.000000 Swatch Groups Colorants Magenta : 100.000000 Swatch Groups Colorants Yellow : 100.000000 Swatch Groups Colorants Black : 100.000000 Format : application/pdf Title : 615 homesafe 无Alarm功能 manual Rendition Class : proof:pdf Document ID : xmp.did:0AAF7628866FE411B72E9A3844FB85BB Instance ID : uuid:e1b6b087-cbd1-4053-955b-db454c2fcbc4 Original Document ID : uuid:9f2ecb0d-9d42-4840-8d28-6bc742c0125c Derived From Instance ID : uuid:2747cd99-b66f-4c41-bbe1-be364a31fbaf Derived From Document ID : xmp.did:508E7613306AE411992ED043AE660C12 Derived From Original Document ID: uuid:9f2ecb0d-9d42-4840-8d28-6bc742c0125c Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:905B5CED28E8E211972EB915AC9EC42F, xmp.iid:F3DAE45384A9E31186D0867B8BD9CB3C, xmp.iid:F4DAE45384A9E31186D0867B8BD9CB3C, xmp.iid:F6DAE45384A9E31186D0867B8BD9CB3C, xmp.iid:BB427EF1C4DCE311AF93E32F5B89D2A0, xmp.iid:C6D90468DBDCE311AF93E32F5B89D2A0, xmp.iid:4F8E7613306AE411992ED043AE660C12, xmp.iid:508E7613306AE411992ED043AE660C12, xmp.iid:0AAF7628866FE411B72E9A3844FB85BB History When : 2013:07:09 08:32:52+08:00, 2014:03:12 09:19:15+08:00, 2014:03:12 09:23:52+08:00, 2014:03:12 10:11:23+08:00, 2014:05:16 17:17:07+08:00, 2014:05:16 17:21:05+08:00, 2014:11:12 14:17:14+08:00, 2014:11:12 14:29:34+08:00, 2014:11:19 09:06:19+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, /, / Producer : Adobe PDF library 9.90 Page Count : 1 Creator : Adobe Illustrator CS5EXIF Metadata provided by EXIF.tools