Lenovo Thinkpad T41 T41P Users Manual T40/T40p, T41/T41p, T42/T42p
THINKPAD T40 IBM_Thinkpad_T40_T40p_T41_T41p_T42_T42p
T41T41P to the manual ec189471-8143-4d44-868a-8a4aff9a4c76
thinkpad t40 t40p t41 t41p t42 t42p
2015-01-24
: Lenovo Lenovo-Thinkpad-T41-T41P-Users-Manual-328643 lenovo-thinkpad-t41-t41p-users-manual-328643 lenovo pdf
Open the PDF directly: View PDF .
Page Count: 260
Download | |
Open PDF In Browser | View PDF |
ThinkPad Computer Hardware Maintenance Manual February 2006 This manual supports: ThinkPad T40/T40p, T41/T41p, T42/T42p (MT 2373/2374/2375/2376/2378/2379) ThinkPad Dock II (MT 2877) Note Before using this information and the product it supports, be sure to read the general information under “Notices” on page 250. Second Edition (February 2006) © Copyright Lenovo 2006. Portions © Copyright International Business Machines Corporation 2006. All rights reserved. U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program under these terms, then we provide this Program under the provisions set forth in Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in Data-General, FAR 52.227.14 (Alternate III). Contents About this manual . . . . . . Introduction . . . . . . . . Important service information . . . . Strategy for replacing FRUs . . . How to use error messages . . . Diskette compatibility matrix . . . . Safety notices: multilingual translations . Safety information . . . . . . . General safety . . . . . . . Electrical safety . . . . . . Safety inspection guide . . . . Handling devices that are sensitive to discharge . . . . . . . Grounding requirements . . . . Laser compliance statement . . . . . . . . . 1 . . . . . . . . . . . . . . . . . . . . . . . . . 3 . 3 . 3 . 4 . 4 . 4 . 16 . 16 . 17 . 19 . . . . . . . . . . . . . . . . electrostatic . . . . . 20 . . . . . 21 . . . . . 22 General descriptions . . . . . . . . Read this first . . . . . . . . . . . What to do first . . . . . . . . . Related service information . . . . . . . Service Web site . . . . . . . . . Restoring the pre-installed system . . . . Passwords . . . . . . . . . . . Power management . . . . . . . . Checkout guide . . . . . . . . . . Testing the computer . . . . . . . . Detecting system information with PC-Doctor . Power system checkout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 25 25 27 27 27 28 32 35 35 38 39 ThinkPad T40/T40p, T41/T41p, T42/T42p Series Product overview . . . . . . . . . . Specifications . . . . . . . . . . Status indicators . . . . . . . . . FRU tests . . . . . . . . . . . Fn key combinations . . . . . . . . Symptom-to-FRU index . . . . . . . . Numeric error codes . . . . . . . . Error messages . . . . . . . . . Beep symptoms . . . . . . . . . No-beep symptoms . . . . . . . . LCD-related symptoms . . . . . . . Intermittent problems . . . . . . . . Undetermined problems . . . . . . . FRU replacement notices . . . . . . . Screw notices . . . . . . . . . . Retaining serial numbers. . . . . . . Removing and replacing a FRU. . . . . . 1010 Battery pack for 14.1-in. LCD models . 1020 Battery pack for 15.0-in. LCD models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 45 45 50 53 54 58 58 62 63 63 64 65 65 66 66 67 70 71 73 © Lenovo 2006. Portions © IBM Corp. 2006. iii 1030 Ultrabay Slim device . . . . . . . . 74 1040 Hard disk drive . . . . . . . . . . 75 1050 DIMM (optional) . . . . . . . . . 77 1060 Keyboard . . . . . . . . . . . 79 1070 DIMM (standard) . . . . . . . . . 83 1080 Modem daughter card (MDC/MDC-2) . . . 84 1090 Bluetooth/Modem daughter card (BMDC/BMDC-2) . . . . . . . . . . 86 1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models) . . . . . . . . 88 1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models) . . 91 1120 Mini PCI adapter . . . . . . . . . 97 1130 Fan assembly . . . . . . . . . . 101 1140 Backup battery for 14.1-in. LCD models 106 1150 Backup battery for 15.0-in. LCD models 108 1160 Speaker assembly . . . . . . . . 110 1170 Keyboard bezel for 14.1-in. LCD models 112 1180 PC Card slot assembly for 14.1-in. LCD models . . . . . . . . . . . . . 114 1190 PC Card slot assembly for 15.0-in. LCD models . . . . . . . . . . . . . 116 1200 LCD assembly for 14.1-in. LCD models 118 1210 LCD assembly for 15.0-in. LCD models 123 1220 CPU . . . . . . . . . . . . 128 1230 Ultrabay Slim guide rail assembly for 14.1-in. LCD models . . . . . . . . . . . 129 1240 Ultrabay Slim guide rail assembly for 15.0-in. LCD models . . . . . . . . . . . 131 1250 VGA and Ultrabay Slim device eject button cable . . . . . . . . . . . . . 134 1260 System board and base cover for 14.1-in. LCD models . . . . . . . . . . . 136 1270 System board, interposer card, and base cover for 15.0-in. LCD models . . . . . . 145 2010 LCD front bezel for 14.1-in. LCD models 153 2020 LCD front bezel for 15.0-in. LCD models 155 2030 Inverter card for 14.1-in. LCD models . . . 157 2040 Inverter card for 15.0-in. LCD models . . . 159 2050 Wireless antenna assemblies, LCD panel, LCD cable assembly, hinges, and LCD cover for 14.1-in. LCD models . . . . . . . . . 160 2060 Wireless antenna assemblies, LCD panel, LCD cable assembly, hinges, and LCD cover for 15.0-in. LCD models . . . . . . . . . 175 3010 ThinkPad Dock II PCI cover . . . . . . 182 3020 ThinkPad Dock II top cover . . . . . . 183 Locations . . . . . . . . . . . . . . 186 Front view . . . . . . . . . . . . 186 Rear view . . . . . . . . . . . . . 188 Bottom view . . . . . . . . . . . . 189 Parts list . . . . . . . . . . . . . . 190 Overall . . . . . . . . . . . . . 191 iv T40/T40p, T41/T41p, T42/T42p 14.1-in. LCD FRUs . 15.0-in. LCD FRUs . Keyboard . . . . Recovery CDs . . Miscellaneous parts . AC adapters . . . Optional FRUs . . Common parts list . Notices . . . . . Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 230 235 237 243 246 247 248 250 252 Contents v vi T40/T40p, T41/T41p, T42/T42p About this manual This manual contains service and reference information for ThinkPad® T40/T40p, T41/T41p, T42/T42p series (MT2373, 2374, 2375, 2376, 2378, 2379, 2668, 2669, 2678, 2679, 2686, and 2687), and ThinkPad Dock II (MT2877) products. Use this manual along with the advanced diagnostic tests to troubleshoot problems. The manual is divided into sections as follows: v The common sections provide general information, guidelines, and safety information required in servicing computers. v The product-specific section includes service, reference, and product-specific parts information. Important This manual is intended for trained service personnel who are familiar with ThinkPad products. Use this manual along with the advanced diagnostic tests to troubleshoot problems effectively. Before servicing a ThinkPad product, be sure to review the safety information under “Safety notices: multilingual translations” on page 4, “Safety information” on page 16, and “Laser compliance statement” on page 22. © Lenovo 2006. Portions © IBM Corp. 2006. 1 2 T40/T40p, T41/T41p, T42/T42p Introduction Important service information Important BIOS and device driver fixes are customer-installable. The BIOS and device drivers are posted on the customer support site http://www.lenovo.com/support Advise customers to contact the Customer Support Center at 800-426-7378 if they need assistance in obtaining or installing any diskette fixes. Customers in Canada should call the Customer Support Center at 800-565-3344 for assistance or download information. Strategy for replacing FRUs Before replacing parts Make sure that all diskette fixes are installed before replacing any FRUs listed in this manual. Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue. v Some computers have both a processor board and a system board. If you are instructed to replace either the processor board or the system board, and replacing one of them does not correct the problem, reinstall that board, and then replace the other one. v If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect. © Lenovo 2006. Portions © IBM Corp. 2006. 3 Important service information Strategy for replacing a hard disk drive Always try to run a low-level format before replacing a hard disk drive. Attention: The drive startup sequence in the computer you are servicing may have been changed. Be extremely careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or programs can be overwritten. How to use error messages Use the error codes displayed on the screen to diagnose failures. If more than one error code is displayed, begin the diagnosis with the first error code. Whatever causes the first error code may also cause false error codes. If no error code is displayed, see whether the error symptom is listed in the Symptom-to-FRU Index for the computer you are servicing. Diskette compatibility matrix The compatibility of each of the drives with the diskettes for it is as follows: Diskette drive Diskette capacity Compatibility 3.5-inch 1.0 MB Read and write 2.0 MB Read and write 4.0 MB Not compatible Safety notices: multilingual translations In this manual, safety notices appear in English with a page number reference to the appropriate multilingual, translated safety notice found in this section. The following safety notices are provided in English, French, German, Hebrew, Italian, and Spanish. 4 T40/T40p, T41/T41p, T42/T42p Safety notices Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts. Avant de remettre l’ordinateur sous tension après remplacement d’une unité en clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer un court-circuit. Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird, muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf Klappergeräusche geprüft werden. Metallteile oder-splitter können Kurzschlüsse erzeugen. Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni siano nella corretta posizione e non siano sparse all’interno dell’elaboratore. Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori; eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi. Antes de encender el sistema despues de sustituir una FRU, compruebe que todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden causar cortocircuitos eléctricos. Introduction 5 Safety notices Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. Certaines batteries de secours contiennent du nickel et du cadmium. Ne les démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne les mettez pas en court-circuit. Pour les mettre au rebut, conformez-vous à la réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans la liste de pièces détachées adéquate. Une batterie ou une pile inappropriée risque de prendre feu ou d’exploser. Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet, kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nur durch die Verkaufsstelle oder den IBM Kundendienst ausgetauscht werden. Sie darf nicht zerlegt, wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Die Batterie kann schwere Verbrennungen oder Verätzungen verursachen. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. (continued) 6 T40/T40p, T41/T41p, T42/T42p Safety notices (continuation of safety notice 2) Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio. Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle. Smaltirle secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la batteria dell’RTC (real time clock) o la batteria di supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio. No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de piezas. La utilización de una batería no apropiada puede provocar la ignición o explosión de la misma. Introduction 7 Safety notices Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignition or explosion of the battery. La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau. Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser que les modèles cités dans la liste de pièces détachées adéquate. En effet, une batterie inappropriée risque de prendre feu ou d’exploser. Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt, wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. (continued) 8 T40/T40p, T41/T41p, T42/T42p Safety notices (continuation of safety notice 3) La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la batteria, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de piezas al sustituir la batería. La utilización de una batería no apropiada puede provocar la ignición o explosión de la misma. Introduction 9 Safety notices Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition or explosion of the battery. La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie, d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau. Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile inappropriée risque de prendre feu ou d’exploser. Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr Inhalt nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung angebrachte Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. (continued) 10 T40/T40p, T41/T41p, T42/T42p Safety notices (continuation of safety notice 4) La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato, smontarla, riscaldarla ad una temperatura superiore ai 100 gradi centigradi, incendiarla o gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni locali). L’impiego di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa. La batería de repuesto es una batería de litio y puede provocar incendios, explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado, ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni exponga el contenido de sus celdas al agua. Deséchela tal como dispone la normativa local. Introduction 11 Safety notices Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes. Seek medical care if any symptoms from the fluid are present after washing. Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes. Consultez un médecin si des symptômes persistent après le lavage. Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei Beschwerden anschließend ein Arzt aufgesucht werden. Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti interessate con acqua corrente per almeno 15 minuti; poi consultare un medico se i sintomi dovessero permanere. Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos como mínimo. Obtenga atención medica si se presenta algún síntoma del fluido despues de lavarse. 12 T40/T40p, T41/T41p, T42/T42p Safety notices Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen. Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la parte inferiore della scheda invertitore. Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la tarjeta invertida. Introduction 13 Safety notices Safety notice 7 DANGER Though the main batteries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials. Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la mise à la masse d’une batterie peut produire suffisamment de courant pour brûler des matériaux combustibles ou causer des brûlures corporelles graves. Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu entzünden oder Verletzungen bei Personen hervorzurufen. Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in corto circuito o a massa può fornire corrente sufficiente da bruciare materiali combustibili o provocare ustioni ai tecnici di manutenzione. Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada o con contacto a tierra puede producir la corriente suficiente como para quemar material combustible o provocar quemaduras en el personal. 14 T40/T40p, T41/T41p, T42/T42p Safety notices Safety notice 8 DANGER Before removing any FRU, power off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface. Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen, der Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU entfernt wird. Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi di interconnessione. Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte cualquier cable de conexión entre dispositivos. Introduction 15 Safety information Safety information The following section presents safety information with which you need to be familiar before you service a ThinkPad computer. General safety Follow these rules to ensure general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift. 4. Lift by standing or by pushing up with your leg muscles; this action removes the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. v Do not perform any action that causes hazards to the customer, or that makes the equipment unsafe. v Before you start the machine, make sure that other service representatives and the customer’s personnel are not in a hazardous position. v Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine. v Keep your toolcase away from walk areas so that other people will not trip over it. v Do not wear loose clothing that can be trapped in the moving parts of a machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it. v Insert the ends of your necktie or scarf inside clothing or fasten it with a nonconductive clip, about 8 centimeters (3 inches) from the end. v Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing. Attention: Metal objects are good electrical conductors. v Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that might be hazardous to your eyes. 16 T40/T40p, T41/T41p, T42/T42p Safety information v After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. v Reinstall all covers correctly before returning the machine to the customer. v Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. WARNING Handling the cord on this product or cords associated with accessories sold with this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. Electrical safety Observe the following rules when working on electrical equipment. Important Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges. Do not use this type of mat to protect yourself from electrical shock. v Find the room emergency power-off (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly. v Do not work alone under hazardous conditions or near equipment that has hazardous voltages. v Disconnect all power before: – Performing a mechanical inspection – Working near power supplies – Removing or installing main units v Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power-off the wall box that supplies power to the machine, and to lock the wall box in the off position. v If you need to work on a machine that has exposed electrical circuits, observe the following precautions: Introduction 17 Safety information – Ensure that another person, familiar with the power-off controls, is near you. Attention: Another person must be there to switch off the power, if necessary. – Use only one hand when working with powered-on electrical equipment; keep the other hand in your pocket or behind your back. Attention: An electrical shock can occur only when there is a complete circuit. By observing the above rule, you may prevent a current from passing through your body. – When using testers, set the controls correctly and use the approved probe leads and accessories for that tester. – Stand on suitable rubber mats (obtained locally, if necessary) to insulate you from grounds such as metal floor strips and machine frames. Observe the special safety precautions when you work with very high voltages; Instructions for these precautions are in the safety sections of maintenance information. Use extreme care when measuring high voltages. v Regularly inspect and maintain your electrical hand tools for safe operational condition. v Do not use worn or broken tools and testers. v Never assume that power has been disconnected from a circuit. First, check that it has been powered off. v Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. v Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) v If – – – 18 an electrical accident occurs: Use caution; do not become a victim yourself. Switch off power. Send another person to get medical aid. T40/T40p, T41/T41p, T42/T42p Safety information Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, required safety items were installed to protect users and service personnel from injury. This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-ThinkPad features or options not covered by this inspection guide. If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem. Consider these conditions and the safety hazards they present: v Electrical hazards, especially primary power (primary voltage on the frame can cause serious or fatal electrical shock) v Explosive hazards, such as a damaged CRT face or a bulging capacitor v Mechanical hazards, such as loose or missing hardware To determine whether there are any potentially unsafe conditions, use the following checklist at the beginning of every service task. Begin the checks with the power off, and the power cord disconnected. Checklist: 1. Check exterior covers for damage (loose, broken, or sharp edges). 2. Power off the computer. Disconnect the power cord. 3. Check the power cord for: a. A third-wire ground connector in good condition. Use a meter to measure third-wire ground continuity for 0.1 ohm or less between the external ground pin and the frame ground. b. The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Remove the cover. 5. Check for any obvious non-ThinkPad alterations. Use good judgment as to the safety of any non-ThinkPad alterations. 6. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 7. Check for worn, frayed, or pinched cables. Introduction 19 Safety information 8. Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with. Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD.) ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes 1. Use product-specific ESD procedures when they exceed the requirements noted here. 2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: v Keep the parts in protective packages until they are inserted into the product. v Avoid contact with other people. v Wear a grounded wrist strap against your skin to eliminate static on your body. v Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap. v Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices. v Select a grounding system, such as those listed below, to provide protection that meets the specific service requirement. Note The use of a grounding system to guard against ESD damage is desirable but not necessary. – Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground. – When working on a double-insulated or battery-operated system, use an ESD common ground or reference point. You can use coax or connector-outside shells on these systems. 20 T40/T40p, T41/T41p, T42/T42p Safety information – Use the round ground prong of the ac plug on ac-operated computers. Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Introduction 21 Laser compliance statement Laser compliance statement Some models of ThinkPad computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products. 22 T40/T40p, T41/T41p, T42/T42p Laser compliance statement If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note the following: CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles aqui especificados pode resultar em perigosa exposição à radiação. Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de réglage et d’utilisation des commandes, ainsi que les procédures décrites. Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet, kann gefährliche Laserstrahlung auftreten. L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle specificate possono provocare l’esposizione a. El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí especificados puede provocar la exposición a radiaciones peligrosas. Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage device could result in exposure to hazardous laser radiation. There are no serviceable parts inside those drives. Do not open. Introduction 23 Laser compliance statement A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz. Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder directement avec des instruments optiques, ou de vous exposer au rayon. Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente in den Laserstrahl sehen und den Strahlungsbereich meiden. Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai eszközökkel. Kerülje a sugárnyalábbal való érintkezést !. Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio. Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el haz de luz. Evite la exposición directa al haz. 24 T40/T40p, T41/T41p, T42/T42p General descriptions The desciptions in this chapter apply to any ThinkPad model that has the PC-Doctor® DOS diagnostics program. Some descriptions might not apply to your particular computer. Read this first Before you go to the checkout guide, be sure to read this section. Important notes v Only certified trained personnel should service the computer. v Before replacing any FRU, read the entire page on removing and replacing FRUs. v When you replace FRUs, use new nylon-coated screws. v Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered. If you select an incorrect drive, data or programs might be overwritten. v Replace an FRU only with another FRU of the correct model. When you replace a FRU, make sure that the model of the machine and the FRU part number are correct by referring to the FRU parts list. v A FRU should not be replaced because of a single, unreproducible failure. Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. Consider replacing a FRU only when a problem recurs. If you suspect that a FRU is defective, clear the error log and run the test again. If the error does not recur, do not replace the FRU. v Be careful not to replace a nondefective FRU. What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: __ 1. Name and phone number of servicer © Lenovo 2006. Portions © IBM Corp. 2006. 25 Read this first __ 2. __ 3. __ 4. __ 5. __ 6. __ 7. __ 8. __ 9. Date of service Date on which the machine failed Date of purchase Failure symptoms, error codes appearing on the display, and beep symptoms Procedure index and page number in which the failing FRU was detected Failing FRU name and part number Machine type, model number, and serial number Customer’s name and address Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer. Following is a list of some common items that are not covered under warranty and some symptoms that might indicate that the system was subjected to stress beyond normal use. Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following list: The following are not covered under warranty: v LCD panel cracked from the application of excessive force or from being dropped v Scratched (cosmetic) parts v Distortion, deformation, or discoloration of the cosmetic parts v Plastic parts, latches, pins, or connectors that have been cracked or broken by excessive force v Damage caused by liquid spilled into the system v Damage caused by the improper insertion of a PC Card or the installation of an incompatible card v Diskette drive damage caused by pressure on the diskette drive cover, foreign material in the drive, or the insertion of a diskette with multiple labels v Damaged or bent diskette eject button v Fuses blown by attachment of a nonsupported device v Forgotten computer password (making the computer unusable) v Sticky keys caused by spilling a liquid onto the keyboard The following symptoms might indicate damage caused by nonwarranted activities: v Missing parts might be a symptom of unauthorized service or modification. v If the spindle of a hard disk drive becomes noisy, it may have been subjected to excessive force, or dropped. 26 T40/T40p, T41/T41p, T42/T42p Related service information Related service information This section provides information about the following: v “Service Web site” v “Restoring the pre-installed system” v “Passwords” on page 28 v “Power management” on page 32 Service Web site When the latest maintenance diskette and the system program service diskette become available, they will be posted on http://www.lenovo.com/think/spm Restoring the pre-installed system When the hard disk drive is replaced because of a failure, no Product Recovery program is on the new hard disk. In this case, you must use the recovery CD for the computer. Order the recovery CD and the hard disk drive at the same time so that you can recover the new hard disk drive with the pre-installed software when they arrive. For information on which CD to order, see “Recovery CDs” on page 237. Recovery to Factory Contents by using Product Recovery CDs To create the service partition and install the factory contents from the recovery CD, do the following: Note The recovery process might take up to 2 hours. 1. Insert the recovery CD into the CD or DVD drive, then restart the computer. 2. Following message is displayed: “Your computer originally included a Product Recovery program ... Reinstall the Product Recovery program? (Y/N) [ ]”. 3. Press Y key. The service partition is created and loaded with the Product Recovery program files. 4. At next window, press Enter to continue. v The service partition is created. The system automatically reboots during this process. v The recovery process copies some files to the service partition, and PKUNZIPs others. v Follow the prompts. You may be prompted to change CDs. v When the process is complete, the system reboots. General descriptions 27 Related service information 5. If you get a message asking which operating system to install, select the proper operating system and press Enter. 6. A message is displayed: “Full Recovery:”. Press Enter to select. 7. On each of the next three windows, press the Y key. 8. Follow the prompts to complete the recovery. Passwords As many as three passwords may be needed for any ThinkPad computer: the power-on password (POP), the hard-disk password (HDP), and the supervisor password (SVP). If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered. Exception: If only an SVP is installed, the password prompt does not appear when the operating system is booted. Power-on password: A power-on password (POP) protects the system from being powered on by an unauthorized person. The password must be entered before an operating system can be booted. Hard-disk password: There are two hard-disk passwords (HDPs): v User HDP—for the user v Master HDP—for the system administrator, who can use it to get access to the hard disk even if the user has changed the user HDP Note: There are two modes for the HDP: User only and Master + User. The Master + User mode requires two HDPs; the system administrator enters both in the same operation. The system administrator then provides the user HDP to the system user. Attention: If the user HDP has been forgotten, check whether a master HDP has been set. If it has, it can be used for access to the hard disk drive. If no master HDP is available, neither Lenovo nor Lenovo authorized servicers provide any services to reset either the user or the master HDP, or to recover data from the hard disk drive. The hard disk drive can be replaced for a scheduled fee. Supervisor password: A supervisor password (SVP) protects the system 28 T40/T40p, T41/T41p, T42/T42p Related service information information stored in the BIOS Setup Utility. The user must enter the SVP in order to get access to the BIOS Setup Utility and change the system configuration. Attention: If the SVP has been forgotten and cannot be made available to the servicer, there is no service procedure to reset the password. The system board must be replaced for a scheduled fee. How to remove the power-on password To remove a POP that you have forgotten, do the following: (A) If no SVP has been set: 1. Turn off the computer. 2. Remove the battery pack. For how to remove the battery pack, see “1010 Battery pack for 14.1-in. LCD models” on page 71. 3. Remove the backup battery. For how to remove the backup battery, see “1140 Backup battery for 14.1-in. LCD models” on page 106. 4. Turn on the computer and wait until the POST ends. After the POST ends, the password prompt does not appear. The POP has been removed. 5. Reinstall the backup battery and the battery pack. (B) If an SVP has been set and is known by the servicer: For T40/T40p, T41/T41p: 1. Turn on the computer and watch the lower left of the screen for a message saying, “To interrupt normal startup, press the blue Access IBM button.” When that message appears, press the Access IBM button. 2. Enter the SVP. Double-click Start setup utility. 3. Select Security, using the cursor keys to move down the menu. 4. Select Password. 5. Select Power-On Password. 6. At the Enter Current Password field, enter the SVP. 7. When the Enter New Password field opens, leave it blank and press Enter twice. 8. In the Changes have been saved window, press Enter. 9. Press F10; then, in the Setup confirmation window, select Yes. For T42/T42p: 1. Turn on the computer; then, while the “To interrupt normal startup, press the blue Access IBM button” General descriptions 29 Related service information message is displayed at the lower-left of the screen, press the Access IBM button. The Rescue and Recovery screen opens. For models supporting the Passphrase function, press F1 while POP icon is appearing on the screen; then enter the POP. For the other models, enter the POP. Note: To check whether the ThinkPad computer supports the Passphrase function, enter BIOS Setup Utility and go to Security --> Password. If Using Passphrase item is displayed in the menu, this function is available on the ThinkPad computer. 2. Click Access BIOS. The system Restart Required window is displayed. 3. Click Yes. The computer restarts, and the BIOS Setup Utility screen opens. 4. Select Security, using the cursor directional keys to move down the menu. 5. Select Password. 6. Select Power-On Password. 7. Type the current SVP in the Enter Current Password field. then leave the Enter New Password field blank, and press Enter twice. 8. In the Changes have been saved window, press Enter. 9. Press F10; then, in the Setup confirmation window, select Yes . How to remove the hard-disk password Attention: If User only mode is selected and the user HDP has been forgotten and cannot be made available to the servicer, neither Lenovo nor Lenovo authorized servicers provide any services to reset the user HDPs or to recover data from the hard disk drive. The hard disk drive can be replaced for a scheduled fee. To remove a user HDP that has been forgotten, when the SVP and the master HDP are known, do the following: For T40/T40p, T41/T41p series: 1. Turn on the computer and watch the lower left of the screen for a message saying, “To interrupt normal startup, press the blue Access IBM button.” When that message appears, press the Access IBM button. 2. For the ThinkPad T40 and T40p series, enter the master HDP. For the ThinkPad T41 and T41 series, press F1 while HDP icon is appearing on the screen; then enter the master HDP. 3. Select Start setup utility. Enter the SVP. 30 T40/T40p, T41/T41p, T42/T42p Related service information 4. Select Security, using the cursor keys to move down the menu. 5. Select Password. 6. Select Hard-disk x password, where x is the letter of the hard disk drive. A pop-up window opens. 7. Select Master HDP. 8. Enter the master HDP; then leave the New Password field blank and press Enter twice. 9. Press F10. 10. Select Yes in the Setup Configuration window. Both user HDP and master HDP will have been removed. For T42/T42p series: 1. Turn on the computer; then, while the “To interrupt normal startup, press the blue Access IBM button” message is displayed at the lower-left of the screen, press the Access IBM button. The Rescue and Recovery screen opens. For models supporting the Passphrase function, press F1 while HDP icon is appearing on the screen; then enter the master HDP. For the other models, enter the master HDP. Note: To check whether the ThinkPad computer supports the Passphrase function, enter BIOS Setup Utility and go to Security --> Password. If Using Passphrase item is displayed in the menu, this function is available on the ThinkPad computer. 2. Click Access BIOS. The system Restart Required window is displayed. 3. Click Yes. The computer restarts, and the BIOS Setup Utility screen opens. 4. Select Security, using the cursor directional keys to move down the menu. 5. Select Password. 6. Select Hard-disk x password, where x is the letter of the hard disk drive. A pop-up window opens. 7. Select Master HDP. 8. Type the current master HDP in the Enter Current Password field. then leave the Enter New Password field blank, and press Enter twice. 9. Press F10. 10. Select Yes in the Setup Configuration window. Both user HDP and master HDP will have been removed. General descriptions 31 Related service information Power management To reduce power consumption, the computer has three power management modes: screen blank, standby, and hibernation. Screen blank mode Screen blank mode has three variants, as follows: 1. If you press Fn+F3, or if the time set on the “LCD off timer” in BIOS Setup Utility expires, v The LCD backlight turns off. v The hard disk drive motor stops. v The speaker is muted. 2. If you are using the ACPI operating system and you press Fn+F3, v The LCD backlight turns off. v The hard disk drive motor stops. 3. If the time set on the “Turn off monitor” timer in the operating system expires, v The LCD backlight turns off. To end screen blank mode and resume normal operation, press any key. Standby mode When the computer enters standby mode, the following events occur in addition to what occurs in screen blank mode: v The LCD is powered off. v The hard disk drive is powered off. v The CPU stops. To enter standby mode, press Fn+F4. Note: If you are using the ACPI operating system, you can change the action of Fn+F4.s In certain circumstances, the computer goes into standby mode automatically: v If a “suspend time” has been set on the timer, and the user does not do any operation with the keyboard, the TrackPoint, the hard disk, the parallel connector, or the diskette drive within that time. v If the battery indicator blinks orange, indicating that the battery power is low. (Alternatively, if Hibernate when battery becomes low has been selected in the “Power Management Properties” window, the computer goes into hibernation mode.) Note for the APM operating system: Even if you do not set the low-battery alarm, the charge indicator notifies you when the battery is low, and then the 32 T40/T40p, T41/T41p, T42/T42p Related service information computer enters the power-saving mode automatically. This default low-battery behavior is independent of the operating system; so if you have set the low-battery alarm, the computer may not do what you specified. It chooses either your setting or the default setting, whichever is appropriate. If you are using the ACPI operating system, only the low-battery alarm is available. To cause the computer to return from standby mode and resume operation, do one of the following: v Press the Fn key. v Open the LCD cover. v Turn on the power switch. Also, in either of the following events, the computer automatically returns from standby mode and resumes operation: v The ring indicator (RI) is signaled by a serial device or a PC Card device. v The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters standby mode. Wait a few seconds before taking any action to reenter operation mode. Hibernation mode Note for OS/2 If you are using OS/2 in the default format, HPFS, you cannot create a hibernation file. If you want to use hibernation mode, you will need to reinstall OS/2 with FAT format. In hibernation mode, the following occurs: v The system status, RAM, VRAM, and setup data are stored on the hard disk. v The system is powered off. Note: If the computer enters the hibernation mode while it is docked to the docking station, do not undock it before resuming normal operation. If you do undock it and then try to resume normal operation, you will get an error message, and you will have to restart the system. To cause the computer to enter hibernation mode, do any of the following: v Press the Fn+F12 keys. General descriptions 33 Related service information v If you are using the APM operating system and have set the mode to Power switch mode [Hibernation], turn off the power switch. v If you are using the ACPI operating system and have defined one of the following actions as the event that causes the system to go into hibernation mode, perform that action. – Closing the lid. – Pressing the power button. – Pressing Fn+F4 keys. Also, the computer goes into hibernation mode automatically in either of the following conditions: v If a “hibernation time” has been set on the timer, and if the user does not do any operation with the keyboard, the TrackPoint, the hard disk drive, the parallel connector, or the diskette drive within that time. v If the timer conditions are satisfied in suspend mode. v If you are using the APM operating system and have set the mode to Hibernate when battery becomes low, and the battery charge becomes critically low. When the power is turned on, the computer returns from hibernation mode and resumes operation. The hibernation file in the boot record on the hard disk drive is read, and system status is restored from the hard disk drive. 34 T40/T40p, T41/T41p, T42/T42p Checkout guide Checkout guide Use the following procedures as a guide in identifying and correcting problems with the ThinkPad computer. Note: The diagnostic tests are intended to test only ThinkPad products. The use of non-ThinkPad products, prototype cards, or modified options can lead to false indications of errors and invalid system responses. 1. Identify the failing symptoms in as much detail as possible. 2. Verify the symptoms. Try to re-create the failure by running the diagnostic test or by repeating the operation. Testing the computer The ThinkPad computer has a test program called PC-Doctor for DOS (hereafter called PC-Doctor.) You can detect errors by running the diagnostics test included in PC-Doctor. This section is an overview of the procedure. For details that depend on model-unique functions, refer to “Product overview” on page 45. For some possible configurations of the computer, PC-Doctor might not run correctly. To avoid this problem, you need to initialize the computer setup by use of the BIOS Setup Utility before you run PC-Doctor. On the BIOS Setup Utility screen, press F9, Enter, F10, and then Enter. Note: When you initialize the computer configuration, some devices are disabled, such as the serial port. If you test one of these devices, you will need to enable it by using Configuration utility for DOS. The utility is available on the following Web site: http://www.lenovo.com/support PC-Doctor cannot be used to test a device that is in the docking station, even if the computer supports the docking station. To test a USB device, connect it to the USB connector of the computer. Creating the PC-Doctor diagnostics diskette To create the PC-Doctor disk from the Access IBM Predesktop Area, do as follows: 1. Enter the Predesktop application by pressing the Access IBM button during POST. 2. When the Access IBM application finishes loading, double-click the “Create Diagnostic Diskettes” icon. General descriptions 35 Checkout guide 3. Authenticating the digital signature takes about 15 seconds; then the ThinkPad computer will reboot into PC-DOS. 4. A batch file automatically starts up to prompt you through the process of creating diskettes. You are notified of how many diskettes you will need. a. You are prompted to insert each diskette in sequence. b. Typically, all you need to do is to press the Enter key for the floppy drive; the system then formats and creates the diskette. c. Each diskette is erased and formatted with the PC-Doctor for DOS boot image. 5. Once all the diskettes have been created, the ThinkPad computer will reboot. The user is asked to remove all diskettes from the drive, or to insert the first diskette created if it is desired to run the diagnostics. To run the test, do as follows: Note: In the following procedure, you can select an item not only with the arrow keys, but also with the TrackPoint pointer. Instead of pressing Enter, click the left button. 1. Insert the PC-Doctor disk into the diskette drive; then power on the computer. If the computer cannot be powered on, go to “Power system checkout” on page 39, and check the power sources. If an error code appears, go to “Symptom-to-FRU index” on page 58. On the first screen, select the model and press Enter. Follow the instructions on the screen. 2. The main panel of PC-Doctor appears. 3. Select Diagnostics with the arrow keys, and press Enter. A pull-down menu appears. (Its exact form depends on the model.) Note: PC-Doctor menu does not mean the formal support device list. Some unsupported device names may appear in the PC-Doctor menu. 36 T40/T40p, T41/T41p, T42/T42p Checkout guide Diagnostics Interactive Tests Hardware Info Utility Quit F1=Help Run Normal Test Run Quick Test CPU/Coprocessor Systemboard Video Adapter Serial Ports Parallel Ports Fixed Disks Diskette Drives Other Devices Communication Wireless LAN Memory Test - Full Memory Test - Quick PC-DOCTOR 2.0 Copyright 2002 PC-Doctor, Inc. All Rights Reserved. Use the cursor keys and ESC to move in menus. Press ENTER to select. The options on the test menu are as follows: Diagnostics v v v v v v v v v v v v v v Run Normal Test Run Quick Test CPU/Coprocessor Systemboard Video Adapter Serial Ports Parallel Ports Fixed Disks Diskette Drives Other Devices Communication Wireless LAN Memory Test – Full Memory Test – Quick Interactive Tests v v v v v v v v Keyboard Video Internal Speaker Mouse Diskette System Load CD-ROM/DVD Test Intel Wireless Radio Notes: v In the Keyboard test in Interactive Tests, the Fn key should be held down for at least 2 seconds; otherwise, it cannot be sensed. v Video Adapter test supports only the LCD display on the ThinkPad computer. If you have an external monitor attached to your computer, detach it before running PC-Doctor for DOS. v To test Digital Signature Chip, the chip must be enabled. v When Legacy Floppy Drives is enabled in the BIOS Setup Utility, the Diskette Drives test is activated even if no legacy diskette drive is attached to the ThinkPad computer. 4. Run the applicable function test. 5. Follow the instructions on the screen. If there is a problem, PC-Doctor shows messages describing it. General descriptions 37 Checkout guide 6. To exit the test, select Quit — Exit Diag. To cancel the test, press Esc. Note: After running PC-Doctor, check the time and date on the system and reset them if they are incorrect. Detecting system information with PC-Doctor PC-Doctor can detect the following system information: Hardware Info v v v v v v v v v v System Configuration Memory Contents Physical Disk Drives Logical Disk Drives VGA Information IDE Drive Info PCI Information PNPISA Info SMBIOS Info VESA LCD Info Utility v v v v v v v v v v v Run External Tests Surface Scan Hard Disk Benchmark System DOS Shell Tech Support Form Battery Rundown View Test Log Print Log Save Log Full Erase Hard Drive Quick Erase Hard Drive 38 T40/T40p, T41/T41p, T42/T42p Checkout guide Power system checkout To 1. 2. 3. 4. verify a symptom, do the following: Turn off the computer. Remove the battery pack. Connect the ac adapter. Check that power is supplied when you turn on the computer. 5. Turn off the computer. 6. Disconnect the ac adapter and install the charged battery pack. 7. Check that the battery pack supplies power when you turn on the computer. If you suspect a power problem, see the appropriate one of the following power supply checkouts: v “Checking the ac adapter” v “Checking operational charging” on page 40 v “Checking the battery pack” on page 40 v “Checking the backup battery” on page 41 Checking the ac adapter You are here because the computer fails only when the ac adapter is used. v If the power problem occurs only when the port replicator is used, replace the port replicator. v If the power-on indicator does not turn on, check the power cord of the ac adapter for correct continuity and installation. v If the computer does not charge during operation, go to ″Checking operational charging.″ To check the ac adapter, do the following: 1. Unplug the ac adapter cable from the computer. 2. Measure the output voltage at the plug of the ac adapter cable. See the following figure: 2 1 Pin Voltage (V dc) 1 +15.5 to +17.0 2 Ground (16 - 10 V) 3. If the voltage is not correct, replace the ac adapter. 4. If the voltage is acceptable, do the following: v Replace the system board. v If the problem persists, go to “Product overview” on page 45. Note: Noise from the ac adapter does not always indicate a defect. General descriptions 39 Checkout guide Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon still does not turn on, replace the battery pack. If the charge indicator still does not turn on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section. Checking the battery pack Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to 100% of its capacity. This protects the battery pack from being overcharged or from having a shortened life. To check your battery, move your cursor to the Power Meter icon in the icon tray of the Windows taskbar and wait for a moment (but do not click), and the percentage of battery power remaining is displayed. To get detailed information about the battery, double-click the Power Meter icon. Note: If the battery pack becomes hot, it may not be able to charge. Remove it from the computer and leave it at room temperature for a while. After it cools down, reinstall and recharge it. To check the battery pack, do the following: 1. Power off the computer. 2. Remove the battery pack and measure the voltage between battery terminals 1 (+) and 5 (−). See the following figure: 4 3 2 1(+) Terminal Voltage (V dc) 1 + 0 to + 12.6 5 Ground (−) 5(-) 3. If the voltage is less than +11.0 V dc, the battery pack has been discharged. 40 T40/T40p, T41/T41p, T42/T42p Checkout guide Note: Recharging will take at least 3 hours, even if the indicator does not turn on. If the voltage is still less than +11.0 V dc after recharging, replace the battery. 4. If the voltage is more than +11.0 V dc, measure the resistance between battery terminals 4 and 5. The resistance must be 4 to 30 K . If the resistance is not correct, replace the battery pack. If the resistance is correct, replace the system board. Checking the backup battery Do the following: 1. Power off the computer, and unplug the ac adapter from it. 2. Turn the computer upside down. 3. Remove the battery pack (see “1010 Battery pack for 14.1-in. LCD models” on page 71). 4. Remove the backup battery (see “Checking the battery pack” on page 40). 5. Measure the voltage of the backup battery. See the following figure. Red (+) Black (-) Wire Voltage (V dc) Red +2.5 to +3.2 Black Ground v If the voltage is correct, replace the system board. v If the voltage is not correct, replace the backup battery. v If the backup battery discharges quickly after replacement, replace the system board. General descriptions 41 Checkout guide 42 T40/T40p, T41/T41p, T42/T42p ThinkPad T40/T40p, T41/T41p, T42/T42p Series Product overview . . . . . . . . . . . . 45 Specifications . . . . . . . . . . . . 45 Status indicators . . . . . . . . . . . 50 FRU tests . . . . . . . . . . . . . 53 Fn key combinations . . . . . . . . . . 54 Symptom-to-FRU index . . . . . . . . . . 58 Numeric error codes . . . . . . . . . . 58 Error messages . . . . . . . . . . . 62 Beep symptoms . . . . . . . . . . . 63 No-beep symptoms . . . . . . . . . . 63 LCD-related symptoms . . . . . . . . . 64 Intermittent problems . . . . . . . . . . 65 Undetermined problems . . . . . . . . . 65 FRU replacement notices . . . . . . . . . 66 Screw notices . . . . . . . . . . . . 66 Retaining serial numbers. . . . . . . . . 67 Restoring the serial number of the system unit 67 Retaining the UUID . . . . . . . . . 68 Reading or writing the ECA information . . . 68 Removing and replacing a FRU. . . . . . . . 70 1010 Battery pack for 14.1-in. LCD models . . . 71 1020 Battery pack for 15.0-in. LCD models . . . 73 1030 Ultrabay Slim device . . . . . . . . 74 1040 Hard disk drive . . . . . . . . . . 75 1050 DIMM (optional) . . . . . . . . . 77 1060 Keyboard . . . . . . . . . . . 79 1070 DIMM (standard) . . . . . . . . . 83 1080 Modem daughter card (MDC/MDC-2) . . . 84 1090 Bluetooth/Modem daughter card (BMDC/BMDC-2) . . . . . . . . . . 86 1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models) . . . . . . . . 88 1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models) . . 91 1120 Mini PCI adapter . . . . . . . . . 97 1130 Fan assembly . . . . . . . . . . 101 1140 Backup battery for 14.1-in. LCD models 106 1150 Backup battery for 15.0-in. LCD models 108 1160 Speaker assembly . . . . . . . . 110 1170 Keyboard bezel for 14.1-in. LCD models 112 1180 PC Card slot assembly for 14.1-in. LCD models . . . . . . . . . . . . . 114 1190 PC Card slot assembly for 15.0-in. LCD models . . . . . . . . . . . . . 116 1200 LCD assembly for 14.1-in. LCD models 118 1210 LCD assembly for 15.0-in. LCD models 123 1220 CPU . . . . . . . . . . . . 128 1230 Ultrabay Slim guide rail assembly for 14.1-in. LCD models . . . . . . . . . . . 129 © Lenovo 2006. Portions © IBM Corp. 2006. 43 1240 Ultrabay Slim guide rail assembly for 15.0-in. LCD models . . . . . . . . . . . 1250 VGA and Ultrabay Slim device eject button cable . . . . . . . . . . . . . 1260 System board and base cover for 14.1-in. LCD models . . . . . . . . . . . 1270 System board, interposer card, and base cover for 15.0-in. LCD models . . . . . . 2010 LCD front bezel for 14.1-in. LCD models 2020 LCD front bezel for 15.0-in. LCD models 2030 Inverter card for 14.1-in. LCD models . . . 2040 Inverter card for 15.0-in. LCD models . . . 2050 Wireless antenna assemblies, LCD panel, LCD cable assembly, hinges, and LCD cover for 14.1-in. LCD models . . . . . . . . . 2060 Wireless antenna assemblies, LCD panel, LCD cable assembly, hinges, and LCD cover for 15.0-in. LCD models . . . . . . . . . 3010 ThinkPad Dock II PCI cover . . . . . . 3020 ThinkPad Dock II top cover . . . . . . Locations . . . . . . . . . . . . . . Front view . . . . . . . . . . . . Rear view . . . . . . . . . . . . . Bottom view . . . . . . . . . . . . Parts list . . . . . . . . . . . . . . Overall . . . . . . . . . . . . . 14.1-in. LCD FRUs . . . . . . . . . . 14.1-in. XGA TFT . . . . . . . . . 14.1-in. SXGA+ TFT . . . . . . . . 15.0-in. LCD FRUs . . . . . . . . . . 15.0-in. XGA TFT . . . . . . . . . 15.0-in. SXGA+ IPS TFT . . . . . . . 15.0-in. UXGA IPS TFT . . . . . . . . Keyboard . . . . . . . . . . . . . Recovery CDs . . . . . . . . . . . Windows XP Professional (for T40/T40p series) Windows XP Professional (for T41/T41p series) Windows XP Professional (for T42/T42p series) Windows 2000 (for T40/T40p series) . . . . Windows 2000 (for T41 series) . . . . . Windows XP Home Edition (for T42/T42p series) . . . . . . . . . . . . Miscellaneous parts . . . . . . . . . . AC adapters . . . . . . . . . . . . Optional FRUs . . . . . . . . . . . Common parts list . . . . . . . . . . Tools . . . . . . . . . . . . . Power cords (system) . . . . . . . . Power cords (ThinkPad Dock II) . . . . . Notices . . . . . . . . . . . . . . Trademarks . . . . . . . . . . . . . 44 T40/T40p, T41/T41p, T42/T42p 131 134 136 145 153 155 157 159 160 175 182 183 186 186 188 189 190 191 220 221 226 230 231 232 234 235 237 237 238 239 241 242 242 243 246 247 248 248 248 249 250 252 Product overview Product overview This section presents the following product-unique information: v “Specifications” v “Status indicators” on page 50 v “FRU tests” on page 53 v “Fn key combinations” on page 54 Specifications The following table lists the specifications of the ThinkPad T40/ T40p, T41/T41p, T42/T42p series: Feature Description Processor T40/T40p series: v Intel® Pentium® M processor 1.3 GHz, 1-MB L2 cache v Intel Pentium M processor 1.5 GHz, 1-MB L2 cache v Intel Pentium M processor 1.6 GHz, 1-MB L2 cache T41/T41p series: v Intel Pentium M processor 1.4 GHz, 1-MB L2 cache v Intel Pentium M processor 1.6 GHz, 1-MB L2 cache v Intel Pentium M processor 1.7 GHz, 1-MB L2 cache T42/T42p series: v Intel Pentium M processor 1-MB L2 cache v Intel Pentium M processor GHz), 2-MB L2 cache v Intel Pentium M processor GHz), 2-MB L2 cache v Intel Pentium M processor GHz), 2-MB L2 cache v Intel Pentium M processor GHz), 2-MB L2 cache v Intel Pentium M processor GHz), 2-MB L2 cache 1.5 GHz, 715 (1.5 725 (1.6 735 (1.7 745 (1.8 755 (2.0 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 45 Product overview Feature Description Bus architecture T40/T40p series: v 400-MHz PSB (Processor System Bus) v 266-MHz DDR SDRAM (PC2100) v HUB link v PCI bus v LPC bus T41/T41p, T42/T42 series: v 400-MHz PSB v 333-MHz DDR SDRAM (PC2700) v HUB link v PCI bus v LPC bus Graphic memory chip T40/T40p series: v 16-MB DDR SDRAM v 32-MB DDR SDRAM v 32-MB DDR SDRAM v 64-MB DDR SDRAM (ATI (ATI (ATI (ATI M6-16) M7-32) M9-32) M9 GL-64) T41/T41p series: v 32-MB DDR SDRAM (ATI M7-32) v 32-MB DDR SDRAM (ATI M9-32) v 128-MB DDR SDRAM (ATI M10 GL-128) T42/T42p series: v 32-MB DDR SDRAM (ATI M7-32) v 64-MB DDR SDRAM (ATI M9-64) v 64-MB DDR SDRAM (ATI M10-64) v 128-MB DDR SDRAM (ATI M10 GL-128) Display v 14.1-inch, 16M colors, XGA (1024 × 768 resolution) TFT color LCD v 14.1-inch, 16M colors, SXGA+ (1400 × 1050 resolution) TFT color LCD v 15.0-inch, 16M colors, XGA (1024 × 768 resolution) TFT color LCD v 15.0-inch, 16M colors, SXGA+ (1400 × 1050 resolution) IPS (in-plane switching) TFT color LCD v 15.0-inch, 16M colors, UXGA (1600 × 1200 resolution) IPS TFT color LCD (continued) 46 T40/T40p, T41/T41p, T42/T42p Product overview Feature Description Standard memory T40/T40p series: v 256-MB DDR SDRAM SO-DIMM (PC2100) card × 1 v 512-MB DDR SDRAM SO-DIMM (PC2100) card × 1 v 1 GB-DDR SDRAM SO-DIMM (PC2100) card × 1 T41/T41p, T42/T42p series: v 256-MB DDR SDRAM SO-DIMM (PC2700) card × 1 v 512-MB DDR SDRAM SO-DIMM (PC2700) card × 1 v 1-GB DDR SDRAM SO-DIMM (PC2700) card × 1 Optional memory T40/T40p series: v 128-MB DDR SDRAM SO-DIMM (PC2100) card v 256-MB DDR SDRAM SO-DIMM (PC2100) card v 512-MB DDR SDRAM SO-DIMM (PC2100) v 1-GB DDR SDRAM SO-DIMM (PC2100) T41/T41p, T42/T42p series: v 128-MB DDR SDRAM SO-DIMM (PC2700) card × 1 v 256-MB DDR SDRAM SO-DIMM (PC2700) card × 1 v 512-MB DDR SDRAM SO-DIMM (PC2700) card × 1 v 1-GB DDR SDRAM SO-DIMM (PC2700) card × 1 (maximum of 2048 MB) CMOS RAM v 242 bytes (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 47 Product overview Feature Description Hard disk drive v 20.0 GB, 4200 rpm, 9.5 mm high, interface (supported by CTO) v 30.0 GB, 4200 rpm, 9.5 mm high, interface v 40.0 GB, 5400 rpm, 9.5 mm high, interface v 60.0 GB, 4200 rpm, 9.5 mm high, interface v 60.0 GB, 5400 rpm, 9.5 mm high, interface v 60.0 GB, 7200 rpm, 9.5 mm high, interface v 80.0 GB, 4200 rpm, 9.5 mm high, interface v 80.0 GB, 5400 rpm, 9.5 mm high, interface IDE IDE IDE IDE IDE IDE IDE IDE Supported hard disk drives are depend on the model. Ultrabay Slim device T40/T40p, T41/T41p series: (standard) v DVD drive, 9.5 mm high v DVD/CD-RW combo drive, 9.5 mm high T42/T42p series: v DVD drive, 9.5 mm high v DVD/CD-RW combo drive, 9.5 mm high v DVD-RAM/RW drive, 9.5 mm high Fingerprint sensor Some models I/O port v v v v v v v v v v Internal modem v 56.6 Kbps Audio v Built-in stereo speakers v Software control volume Infrared transfer v IrDA 1.1 Ethernet (on the system board) T40/T40p, T41/T41p series: v 10/100Base Ethernet v Gigabit Ethernet External monitor connector Stereo headphone jack Monaural microphone jack Infrared port Parallel connector Docking connector RJ11 connector RJ45 connector TV-out connector (S-Video) Universal serial bus (USB) connector × 2 (compatible with USB 1.1 and 2.0) T42/T42p series: v Gigabit Ethernet (continued) 48 T40/T40p, T41/T41p, T42/T42p Product overview Feature Description Mini PCI adapter T40/T40p series: v ThinkPad Dual-Band 11a/b Wi-Fi Wireless Mini PCI Adapter v Cisco Aironet Wireless 802.11b v Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter T41/T41p series: v Cisco Aironet Wireless 802.11b v Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter v ThinkPad 11a/b/g Wireless LAN Mini PCI Adapter T42/T42p series: v Cisco Aironet Wireless 802.11b v Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter v ThinkPad 11a/b/g Wireless LAN Mini PCI Adapter v Intel PRO Wireless 2200BG Mini-PCI Adapter v ThinkPad 11b/g Wireless LAN Mini PCI Adapter v ThinkPad 11a/b/g Wireless LAN Mini PCI Adapter II v Intel PRO Wireless 2915ABG Mini-PCI Adapter PC Card v One Type-III v Two Type-II Communication daughter card (CDC) T40/T40p, T41/T41p series: v V.90 modem daughter card (MDC) v ThinkPad Integrated Bluetooth with 56K Modem (BMDC) T42/T42p series: v ThinkPad Integrated 56K Modem (MDC-2) v ThinkPad Integrated Bluetooth III with 56K Modem (BMDC-2) Touch pad v UltraNav ThinkLight Yes Battery v Li-ion battery (6 cells) v Li-ion battery (9 cells) v Ultrabay Slim Li Polymer battery (option) AC adapter v 72-watt type Preinstalled operating system T40/T40p, T41/T41p series: v Windows XP Professional v Windows 2000 T42/T42p series: v Windows XP Professional ThinkPad T40/T40p, T41/T41p, T42/T42p Series 49 Product overview Status indicators The system status indicators show the status of the computer, as follows: 1 9 2 2 50 3 8 2 7 2 6 2 5 2 4 2 8 T40/T40p, T41/T41p, T42/T42p 3 2 2 Product overview Indicator Meaning 1 Ultrabay Slim status Green: An Ultrabay Slim device is installed and in use. Blinking green: An Ultrabay Slim device is in the process of being detached. Turn off: An Ultrabay Slim device is ready to be attached or detached. Note: If you are using Windows 2000, the Ultrabay Slim status indicator does not blink while an Ultrabay Slim device is being detached. Instead, a message box pops up when the process is completed; then the indicator turns off. 2 Standby status Green: The computer is in standby mode. Blinking green: The computer is entering standby mode or hibernation mode, or is resuming normal operation. 3 Battery status Green: The battery is in use and has enough power. The ac adapter has charged the battery completely. Blinking green: The battery is being charged, but still has enough power to operate. (At regular intervals, the indicator light turns off briefly.) Orange: The battery is being charged, but the battery power is still low. Blinking orange: The battery needs to be charged. When the indicator starts blinking orange, the computer beeps three times. 4 Power on Green: The computer is on and ready to use. This indicator stays lit whenever the computer is on and is not in standby mode. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 51 Product overview Indicator Meaning 5 Drive in use Green: Data is being read from or written to the hard disk drive, the diskette drive, or the drive in the Ultrabay Slim device. When this indicator is on, do not put the computer into standby mode or turn off the computer. Note: Do not move the system while the green drive-in-use light is on. Sudden physical shock could cause drive errors. 6 Caps lock Green: Caps Lock mode is enabled. To enable or disable Caps Lock mode, press the Caps Lock key. 7 Num lock Green: The numeric keypad on the keyboard is enabled. To enable or disable the keypad, press and hold the Shift key, and press the NumLk (ScrLk) key. 8 Bluetooth status Green: Bluetooth wireless is operational. This indicator is on when Bluetooth wireless is on and not in suspend mode. R 9 Wireless status 52 Green: The wireless feature (the IEEE 802.11 standard) is on, and the radio link is ready for use. Blinking green: Data is being transmitted. T40/T40p, T41/T41p, T42/T42p Product overview FRU tests The following table shows the test for each FRU. FRU Applicable test System board 1. Diagnostics --> CPU/Coprocessor 2. Diagnostics --> Systemboard 3. If the docking station or the port replicator is attached to the ThinkPad computer, undock it. Place the computer on a horizontal surface, and run Diagnostics --> Other Devices --> HDD Active Protection Test. Note: Do not apply any physical shock to the computer while the test is running. Power Diagnostics --> Other Devices --> AC Adapter, Battery 1 (Battery 2) LCD unit 1. Diagnostics --> Video Adapter 2. Interactive Tests --> Video Modem daughter card (MDC or BMDC) 1. Make sure the modem is set up correctly. 2. Replace the modem jack and the modem card in turn, and run the following tests in Diagnostics --> Communication: a. Lucent Soft Modem Loopback b. Lucent Soft Modem Dialtone c. Conexant Smart Modem Interrupt d. Conexant Smart Modem Dialtone Audio 1. Interactive Tests --> Internal Speaker 2. Diagnostics --> Other Devices --> Analog Devices AC97 CODEC Test Speaker Interactive Tests --> Internal Speaker PC Card slots 1. Diagnostics --> Systemboard --> PCMCIA 2. Insert a PC Card Wrap Plug into every PC Card slot, and run Diagnostics --> Systemboard --> PCMCIA External Loop Keyboard 1. Diagnostics --> Systemboard --> Keyboard 2. Interactive Tests --> Keyboard Hard disk drive Diagnostics --> Fixed Disks Diskette drive 1. Diagnostics --> Diskette Drives 2. Interactive Tests --> Diskette DVD drive or DVD/CD-RW combo drive 1. Diagnostics --> Other Devices --> CD-ROM/DVD 2. Interactive Tests --> CD-ROM/DVD Test (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 53 Product overview FRU Applicable test Memory 1. If two DIMMs are installed, remove one of them and run Diagnostics --> Memory Test—Quick. 2. If the problem does not recur, return the DIMM to its place, remove the other one, and run the test again. 3. If the test does not detect the error, run Diagnostics --> Memory Test—Full. Fan 1. Turn on the computer and check the air turbulence at the louver near the PC Card slot. 2. Run Diagnostics --> Other Devices --> Fan. TrackPoint or pointing device If the TrackPoint does not work, check the configuration as specified in the ThinkPad Configuration program. If the TrackPoint is disabled, select Automatic to enable it. After you use the TrackPoint, the pointer may drift on the screen for a short time. This drift can occur when a slight, steady pressure is applied to the TrackPoint pointer. This symptom is not a hardware problem. If the pointer stops after a short time, no service action is necessary. If enabling the TrackPoint does not correct the problem, continue with the following: v Interactive Tests --> Mouse Touch Pad If the Touch Pad does not work, check the configuration as specified in the ThinkPad Configuration program. If the Touch Pad is disabled, select Automatic to enable it. If enabling the Touch Pad does not correct the problem, continue with the following: v Interactive Tests --> Mouse Fn key combinations The following table shows the function of each combination of Fn with a function key. Key combination Description Fn+F1 Reserved. Fn+F2 Reserved. Fn+F3 Turn off the computer display, leaving the screen blank. To turn the computer display on again, press any key or press the TrackPoint pointing stick. (continued) 54 T40/T40p, T41/T41p, T42/T42p Product overview Key combination Description Fn+F4 Put the computer in standby mode. To return to normal operation, press the Fn key only, without pressing a function key. Notes: 1. This mode is called suspend mode in Windows NT. 2. In Windows 2000 and Windows XP, this combination of keys functions as a sleep button. The setting can be changed so that pressing it puts the computer into hibernation mode or even shuts the computer down. Fn+F5 Control the power source of the built-in Bluetooth wireless device. This combination of the keys functions as a toggle switch of the power state. Note: In Windows 98, Windows 2000, or Windows XP, this combination of keys enables or disables the built-in wireless networking features (the IEEE 802.11 standard) and the Bluetooth wireless features. To use this function, the following drivers must be installed. v ThinkPad Power Management driver v OnScreen Display utility v Wireless device drivers Fn+F6 Reserved. Fn+F7 Switch a display output location v External monitor (CRT display) v Computer display and external monitor (LCD + CRT display) v Computer display (LCD) Note: For any operating system other than Windows 2000 or Windows XP, no additional procedure is needed; just press Fn+F7. Notes: 1. This function does not work when different desktop images are displayed on the computer display and the external monitor (the Extend desktop function). 2. This function does not work while a DVD movie or a video clip is playing. 3. For Windows 2000 or Windows XP, a hotkey application might take over the switching function. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 55 Product overview Key combination Description Fn+F8 Note: This function is not supported in Windows 2000 and Windows XP. If the image displayed on the computer is smaller than the physical display, switch the computer screen size between expanded mode and normal mode. Fn+F9 Open the ThinkPad EasyEject Utility screen. Buttons for the following choices are displayed: v Eject ThinkPad PC from Dock: This button is displayed only if the ThinkPad computer has been attached to a ThinkPad Dock II. The computer can be detached from the ThinkPad Dock II. v Eject ThinkPad PC from Mini Dock: This button is displayed only if the ThinkPad computer has been docked in a ThinkPad Mini Dock and one or more USB devices have been connected to the ThinkPad Mini Dock. You can stop and remove all the USB devices safely by clicking the button. Note: If a diskette drive is connected to the external-diskette-drive connector of the ThinkPad Mini Dock, you cannot connect a USB diskette drive. v Run EasyEject Actions: This button is used to select, stop, or remove external devices connected to the ThinkPad computer. v Configure EasyEject Actions: Opens the ThinkPad EasyEject Utility main window. v Fn+F9 Settings: Configures the settings for the Fn+F9 function. You can use this utility to stop and remove all ejectable devices connected to the ThinkPad computer, the ThinkPad Mini Dock, or the ThinkPad Port Replicator II. You cannot use it to detach the computer from the ThinkPad Mini Dock or the ThinkPad Port Replicator II. Note: This function is supported only in Windows 2000 and Windows XP. Fn+F10 Reserved. Fn+F11 Reserved. (continued) 56 T40/T40p, T41/T41p, T42/T42p Product overview Key combination Description Fn+F12 Put the computer into hibernation mode. To return to normal operation, press the power button for less than four seconds. Note: To use Fn+F12 for hibernation in Windows 2000 or Windows XP, you must have the PM device driver installed on the computer. Fn+PgUp Turn the ThinkLight on or off. Note: This function is supported only on the ThinkPad computers that have the ThinkLight. The on or off status of the ThinkLight is shown on the screen for a few seconds when you press Fn+PgUp. Fn+Home The computer display becomes brighter. Fn+End The computer display becomes dimmer. Fn+Spacebar Enable the FullScreen Magnifier function. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 57 Symptom-to-FRU index Symptom-to-FRU index The symptom-to-FRU index in this section lists symptoms and errors and their possible causes. The most likely cause is listed first, in boldface type. Note: Do the FRU replacement or other actions in the sequence shown in the column headed “FRU or action, in sequence.” If replacing a FRU does not solve the problem, put the original part back in the computer. Do not replace a nondefective FRU. This index can also help you determine, during regular servicing, what FRUs are likely to need to be replaced next. A numeric error is displayed for each error detected in POST or system operation. In the displays, n can be any number. If no numeric code is displayed, check the narrative descriptions of symptoms. If the symptom is not described there, go to “Intermittent problems” on page 65. Note For a device not supported by diagnostic codes in the ThinkPad notebook computers, see the manual for that device. Numeric error codes Symptom or error FRU or action, in sequence 0175 Bad CRC1, stop POST task—The EEPROM checksum is not correct. System board. 0176 System Security—The system has been tampered with. 1. Run BIOS Setup Utility, and save the current setting by pressing F10. 2. System board. 0177 Bad SVP data, stop POST task—The checksum of the supervisor password in the EEPROM is not correct. System board 0182 Bad CRC2. Enter BIOS Setup and load Setup defaults.—The checksum of the CRS2 setting in the EEPROM is not correct. 1. Run BIOS Setup Utility. Press F9, and Enter to load the default setting. Then save the current setting by pressing F10. 2. System board. 58 T40/T40p, T41/T41p, T42/T42p Symptom-to-FRU index Symptom or error FRU or action, in sequence 0185 Bad startup sequence settings. Enter BIOS Setup and load Setup defaults. 1. Run BIOS Setup Utility. Press F9, and Enter to load the default setting. Then save the current setting by pressing F10. 0187 EAIA data access error—The access to EEPROM is failed. System board. 0188 Invalid RFID Serialization Information Area. System board. 0189 Invalid RFID configuration information area—The EEPROM checksum is not correct. System board. 0190 Critical low-battery error 1. Charge the battery pack. 2. Battery pack. 0191 System Security—Invalid Remote Change requested. 1. Run BIOS Setup Utility, and then save current setting by pressing F10. 2. System board. 0192 System Security— IBM Embedded Security hardware tamper detected. System board. 0199 1. Run BIOS Setup Utility, System Security—IBM Security and then save the current password retry count exceeded. setting by pressing F10. 2. System board. 01C8 Two or more modem devices are found. Remove all but one of them. Pressto continue. 1. Remove either a Mini-PCI Card or a modem daughter card. Otherwise, press Esc to ignore the warning message. 2. System board. 01C9 1. Remove the Ethernet More than one Ethernet devices device that you installed; are found. Remove one of or press Esc to ignore the them. Press to continue. warning message. 2. System board. 0200 Hard disk error—The hard disk is not working. 1. Reseat the hard disk drive. 2. Load Setup Defaults in BIOS Setup Utility. 3. Hard disk drive. 4. System board. 021x Keyboard error. Run interactive tests of the keyboard and the auxiliary input device. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 59 Symptom-to-FRU index Symptom or error FRU or action, in sequence 0220 Monitor type error—Monitor type does not match the one specified in CMOS. Load Setup Defaults in BIOS Setup Utility. 0230 Shadow RAM error—Shadow RAM fails at offset nnnn. System board. 0231 System RAM error—System RAM fails at offset nnnn. 1. DIMM. 2. System board. 0232 Extended RAM error— Extended RAM fails at offset nnnn. 1. DIMM. 2. System board. 0250 System battery error—System battery is dead. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 0251 System CMOS checksum bad— Default configuration used. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 0252 Password checksum bad—The password is cleared. Reset the password by running BIOS Setup Utility. 0260 System timer error. 1. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 2. System board. 0270 Real-time clock error. 1. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 2. System board. 0271 Date and time error—Neither the date nor the time is set in the computer. Run BIOS Setup Utility to reset the time and date. 0280 Previous boot incomplete— Default configuration used. 1. Load “Setup Default” in BIOS Setup Utility. 2. DIMM. 3. System board. 02F5 DMA test failed. 1. DIMM. 2. System board. 02F6 Software NMI failed 1. DIMM. 2. System board. 02F7 Fail-safe timer NMI failed 1. DIMM. 2. System board. 1802 Unauthorized network card is plugged in—Turn off and remove the miniPCI network card. 1. Remove Mini PCI network card. 2. System board. 60 T40/T40p, T41/T41p, T42/T42p Symptom-to-FRU index Symptom or error FRU or action, in sequence 1803 Unauthorized daughter card is plugged in—Turn off and remove the daughter card. 1. Remove the daughter card that you installed. 2. System board. 1810 Hard disk partition layout error. 1. If the Access IBM Predesktop Area has been previously disabled, then go to the BIOS Setup Utility by pressing F1 to open the BIOS Setup Utility. Select Security --> Predesktop Area --> Access IBM Predesktop Area. Set this item to Disabled. Save and exit. 2. If the Access IBM Predesktop Area has not been previously disabled, press Enter to load Access IBM Predesktop Area. Then run RECOVER TO FACTORY CONTENTS in Access IBM Predesktop Area. 3. If item 2 failed, press F3 in the Welcome screen in RECOVER TO FACTORY CONTENTS. Run FDISK, and then delete all partitions. Run RECOVER TO FACTORY CONTENTS in Access IBM Predesktop Area again. 4. If item 3 failed, select CD-ROM boot in Startup in Access IBM Predesktop Area. Boot from the Recovery CD and perform full recovery from it. 5. If item 4 failed, replace the hard disk drive. 2000 IBM Hard Drive Active Protection sensor diagnostics failed. Press to continue. Press to enter SETUP 1. Undock docking station or port replicator if it is attached to the ThinkPad computer, and place the computer on a horizontal surface. Do not apply any physical shock to the computer. 2. Run Diagnostics --> Other Devices --> HDD Active Protection Test. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 61 Symptom-to-FRU index Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. 3. System board. Allocation error for device. 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. 3. System board. Failing bits: nnnn. 1. DIMM. 2. System board. Invalid system configuration data. 1. DIMM. 2. System board. I/O device IRQ conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility. 2. Backup battery. 3. System board. Operating system not found. 1. Check that the operating system has no failure and is installed correctly. 2. Enter the BIOS Setup Utility and see whether the hard disk drive and the diskette drive are properly identified. 3. Reseat the hard disk drive. 4. Reinstall the operating system. 5. Diskette drive. 6. Hard disk drive. 7. System board. Hibernation error. 1. Restore the system configuration to what it was before the computer entered hibernation mode. 2. If memory size has been changed, re-create the hibernation file. Fan error. Fan. Thermal sensing error. System board. Authentication of system services failed. Press to resume. The Predesktop Area in the HDD is corrupted. Restore it from a recovery CD. 62 T40/T40p, T41/T41p, T42/T42p Symptom-to-FRU index Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector. 2. LCD assembly. 3. External CRT. 4. System board. One long and two short beeps, and a blank or unreadable LCD. 1. System board. 2. LCD assembly. 3. DIMM. Two short beeps with error codes. POST error. See “Numeric error codes” on page 58. Two short beeps and a blank screen. 1. System board. 2. DIMM. Three short beeps, pause, three more short beeps, and one short beep. 1. DIMM. 2. System board One short beep, pause, three short beeps, pause, three more short beeps, and one short beep. Only the cursor appears. Reinstall the operating system. Four cycles of four short beeps and a blank screen. System board (security chip) Five short beeps and a blank screen. System board No-beep symptoms Symptom or error FRU or action, in sequence No beep, power-on indicator on, LCD blank, and no POST. 1. Make sure that every connector is connected tightly and correctly. 2. DIMM. 3. System board. No beep, power-on indicator on, and LCD blank during POST. 1. Reseat DIMM. 2. System board. The power-on password prompt appears. A power-on password or a supervisor password is set. Type the password and press Enter. The hard-disk password prompt appears. A hard-disk password is set. Type the password and press Enter. The DOS full screen looks smaller than it should. Start the ThinkPad Configuration program and set the Screen expansion function. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 63 Symptom-to-FRU index LCD-related symptoms Important The TFT LCD for the notebook computer contains many thin-film transistors (TFTs). The presence of a small number of dots that are missing, discolored, or always lighted is characteristic of TFT LCD technology, but excessive pixel problems can cause viewing concerns. The LCD should be replaced if the number of missing, discolored, or lighted dots in any background is: v XGA: 8 or more bright dots, 8 or more dark dots, or a total of 9 or more bright and dark dots. v SXGA+: 11 or more bright dots, 13 or more dark dots, or a total of 16 or more bright and dark dots. v UXGA: 11 or more bright dots, 16 or more dark dots, or a total of 16 or more bright and dark dots. Note: A bright dot means a pixel is always on (white or color.) A dark dot means a pixel is always off (black color.) Symptom or error FRU or action, in sequence No beep, power-on indicator on, and a blank LCD during POST. System board. v LCD backlight not working. v LCD too dark. v LCD brightness cannot be adjusted. v LCD contrast cannot be adjusted. 1. Reseat the LCD connectors. 2. LCD assembly. 3. System board. v v v v LCD screen unreadable. Characters missing pixels. Screen abnormal. Wrong color displayed. Horizontal or vertical lines displayed on LCD. 64 1. See important note for “LCD-related symptoms.” 2. Reseat all LCD connectors. 3. LCD assembly. 4. System board. LCD assembly. T40/T40p, T41/T41p, T42/T42p Symptom-to-FRU index Intermittent problems Intermittent system hang problems can be due to a variety of causes that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. FRU replacement should be considered only when a problem recurs. When analyzing an intermittent problem, do the following: 1. Run the diagnostic test for the system board in loop mode at least 10 times. 2. If no error is detected, do not replace any FRUs. 3. If any error is detected, replace the FRU shown by the FRU code. Rerun the test to verify that no more errors exist. Undetermined problems If the diagnostic tests did not identify the adapter or device that has failed, if wrong devices are installed, or if the system simply is not operating, follow these procedures to isolate the failing FRU (do not isolate FRUs that have no defects). Verify that all attached devices are supported by the computer. Verify that the power supply being used at the time of the failure is operating correctly. (See “Power system checkout” on page 39.) 1. Turn off the computer. 2. Visually check each FRU for damage. Replace any damaged FRU. 3. Remove or disconnect all of the following devices: a. Non-ThinkPad devices b. Devices attached to the port replicator c. Printer, mouse, and other external devices d. Battery pack e. Hard disk drive f. External diskette drive g. DIMM h. CD-ROM and diskette drive in the Ultrabay i. PC Cards 4. Turn on the computer. 5. Determine whether the problem has been solved. 6. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. 7. If the problem remains, replace the following FRUs one at a time (do not replace a nondefective FRU): a. System board b. LCD assembly ThinkPad T40/T40p, T41/T41p, T42/T42p Series 65 FRU replacement notices FRU replacement notices This section contains notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the ThinkPad computer, this problem is addressed with special nylon-coated screws that have the following characteristics: v They maintain tight connections. v They do not easily come loose, even with shock or vibration. v They are harder to tighten. v Each one should be used only once. Do the following when you service this machine: v Keep the screw kit (for the P/N, see “Miscellaneous parts” on page 243) in your tool bag. v Always use new screws. v Use a torque screwdriver if you have one. Tighten screws as follows: v Plastic to plastic Turn an additional 90 degrees after the screw head touches the surface of the plastic part: 90 degrees more (Cross-section) v Logic card to plastic Turn an additional 180 degrees after the screw head touches the surface of the logic card: 180 degrees more (Cross-section) v Torque driver If you have a torque driver, refer to the “Torque” column for each step. 66 T40/T40p, T41/T41p, T42/T42p FRU replacement notices v Make sure that you use the correct screw. If you have a torque screwdriver, tighten all screws firmly to the torque shown in the table. Never use a screw that you removed. Use a new one. Make sure that all of the screws are tightened firmly. Retaining serial numbers This section includes the following descriptions: v “Restoring the serial number of the system unit” v “Retaining the UUID” on page 68 v “Reading or writing the ECA information” on page 68 Restoring the serial number of the system unit When the computer was manufactured, the EEPROM on the system board was loaded with the serial numbers of the system and all major components. These numbers need to remain the same throughout the life of the computer. If you replace the system board, you must restore the serial number of the system unit to its original value. Before replacing the system board, save the original serial number by doing the following: 1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 1. Set System Identification. 3. Select 2. Read S/N data from EEPROM. The serial number of each device in your computer is displayed; the serial number of the system unit is listed as follows: v 20: Serial number Write down that number. Note: The serial number of the system unit is also written on the label attached to the bottom of the computer. After you have replaced the system board, restore the serial number by doing the following: 1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later and restart the computer. 2. From the main menu, select 1. Set System Identification. 3. Select 1. Add S/N data from EEPROM. Follow the instructions on the screen. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 67 FRU replacement notices Retaining the UUID The Universally Unique Identifier (UUID) is a 128-bit number uniquely assigned to your computer at production and stored in the EEPROM of your system board. The algorithm that generates the number is designed to provide unique IDs until the year A.D. 3400. No two computers in the world have the same number. When you replace the system board, you must set the UUID on the new system board as follows: 1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 4. Assign UUID. A new UUID is created and written. If a valid UUID already exists, it is not overwritten. Reading or writing the ECA information Information on Engineering Change Announcements (ECA) are stored in the EEPROM of the system board. The electronic storage of this information simplifies the procedure to check if the ECA has been previously applied to a machine. The machine does not need to be disassembled to check for the ECA application. To check what ECAs have been previously applied to the machine, use the ECA Information Read/Write function on the ThinkPad Hardware Maintenance Diskette Version 1.73 or later. 1. Insert the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 6. Set ECA Information. 3. To read ECA information, select 2. Read ECA/rework number from EEPROM and follow the instruction. 4. To read box build date, select 5. Read box build date from EEPROM, and follow the instruction on the screen. After an ECA has been applied to the machine, the EEPROM must be updated to reflect the ECA's application. Use the ThinkPad Hardware Maintenance Diskette Version 1.73 or later to update the EEPROM. Note: Only the ECA number is stored in the EEPROM. The machine type of the ECA is assumed be the same as the machine type of the machine that had the ECA applied to it. 1. Insert the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer. 2. From the main menu, select 6. Set ECA Information. 68 T40/T40p, T41/T41p, T42/T42p FRU replacement notices 3. To write ECA information, select 1. Write ECA/rework number from EEPROM, and follow the instruction. 4. To write box build date, select 4. Write box build date from EEPROM, and follow the instruction on the screen. If the system board is being replaced, try to read the ECA information from the old system board and transfer the information to the new system. If the system board is inoperable, this will not be possible. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 69 Removing and replacing a FRU Removing and replacing a FRU This section presents directions and drawings for use in removing and replacing a FRU. Be sure to observe the following general rules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 66. 3. Begin by removing any FRUs that have to be removed before the failing FRU. Any such FRUs are listed at the top of the page. Remove them in the order in which they are listed. 4. Follow the correct sequence in the steps for removing the FRU, as given in the drawings by the numbers in square callouts. 5. When turning a screw to replace a FRU, turn it in the direction as given by the arrow in the drawing. 6. When removing the FRU, move it in the direction as given by the arrow in the drawing. 7. To put the new FRU in place, reverse the removal procedure and follow any notes that pertain to replacement. For information about connecting and arranging internal cables, see “Locations” on page 186. 8. When replacing a FRU, use the correct screw as shown in the procedures. DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Attention: After replacing a FRU, do not turn on the computer until you have made sure that all screws, springs, and other small parts are in place and none are loose inside the computer. Verify this by shaking the computer gently and listening for rattling sounds. Metallic parts or metal flakes can cause electrical short circuits. Attention: The system board is sensitive to, and can be damaged by, electrostatic discharge. Before touching it, establish personal grounding by touching a ground point with one hand or by using an electrostatic discharge (ESD) strap (P/N 6405959). 70 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1010 Battery pack for 14.1-in. LCD models DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. 1 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 71 Removing and replacing a FRU Holding the battery release lever in the unlocked position 2, remove the battery pack 3. 2 3 When installing: Install the battery pack along the slide rails on the left and right sides of the battery-pack slot. Then make sure that both battery latches, a and b, are locked, as in the following figure. b 72 T40/T40p, T41/T41p, T42/T42p a Removing and replacing a FRU 1020 Battery pack for 15.0-in. LCD models DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. Holding the battery release lever in the unlocked position 1, remove the battery pack 2. 1 2 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 73 Removing and replacing a FRU 1030 Ultrabay Slim device Note Ultrabay Slim does not accept any of the following devices: v Ultrabay Plus devices v Ultrabay 2000 devices For devices compatible with the Ultrabay Slim bay, see “Optional FRUs” on page 247. Note: When you release the switch in step 1, the lever pops out. In step 2, pull the lever a little to release the device from the bay. 1 2 3 74 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1040 Hard disk drive Attention v Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. v Before removing the drive, have the user make a backup copy of all the information on it if possible. v Never remove the drive while the system is operating or is in suspend mode. For access, remove this FRU: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 1 Note: The hard disk is attached to the cover. Step Screw (quantity) 1 HDD screw (1) or security screw (1) Note: Use a 2.5-mm Allen wrench to remove the security screw. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 75 Removing and replacing a FRU 2 3 3 4 When installing: Make sure that the hard-disk connector is attached firmly. 76 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1050 DIMM (optional) For access, remove this FRU: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 Note: Loosen the screw 1, but do not remove it. 2 1 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 77 Removing and replacing a FRU 3 4 3 When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and does not move easily. 78 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1060 Keyboard For access, remove this FRU: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 1 3 1a Note: Screw 1a is only for the models with 14.1-in. LCD. Other models do not have this screw. Step Icon 1 3 1a Screw (quantity) Color Torque M2 × 10 mm, flat-head, nylon-coated (3) Black 0.245 Nm (2.5 kgfcm) M2 × 10 mm, flat-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 79 Removing and replacing a FRU Press the part indicated by the arrow 2 in the direction of the arrow. This releases the latches of the keyboard from the frame, so that the front side of the keyboard pops out. 2 Pull the keyboard a little in the direction of the arrow 3, and then detach the connector 4. 4 3 80 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU When installing: 1. Attach the connector 1. 1 2. Make sure that the keyboard edges, marked a in the figure, are under the frame. a a a (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 81 Removing and replacing a FRU 3. To make sure that the front side of the keyboard is housed firmly, gently press the keys with your fingers and try to slide the keyboard towards you. 4. Make sure that all the projections on the front side of the keyboard b are firmly attached under the frame. b b 5. Secure the keyboard from the underside of the computer, using the new screws provided with the keyboard. 82 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1070 DIMM (standard) For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1060 Keyboard” on page 79 1 2 1 When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and does not move easily. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 83 Removing and replacing a FRU 1080 Modem daughter card (MDC/MDC-2) For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1060 Keyboard” on page 79 2 1 1 Step Screw (quantity) Color Torque 1 M2 × 10 mm, flat-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) In step 2, remove the card by pulling the tab with your fingers in the direction of the arrow. (continued) 84 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Turn the card over 3, and detach the modem connector 4. 3 4 When installing: Make sure that connector 4 and the connector on the underside of the card are firmly attached. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 85 Removing and replacing a FRU 1090 Bluetooth/Modem daughter card (BMDC/BMDC-2) For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1060 Keyboard” on page 79 2 1 1 Step Screw (quantity) Color Torque 1 M2 × 10 mm, flat-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) In step 2, remove the card by pulling the tab with your fingers in the direction of the arrow. (continued) 86 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Turn the card over 3, and detach the modem connector 4. If the Bluetooth wireless antenna jack has a tab marked ″BT″, unplug the jack by pulling the tab with your fingers. If the antenna jack does not have the tab, unplug the jack by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connetor with your fingers and gently unplug it in direction of the arrow 5. 3 5 4 When installing: Make sure that connector 4, the jack 5, and the connector on the underside of the card are firmly attached. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 87 Removing and replacing a FRU 1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models) For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 Notes v In models with the fingerprint sensor, the sensor has been attached to the palm rest FRU as the child part. In case of the fingerprint sensor has any defects and needs to be replaced, you need to replace the palm rest by following the procedures in this section. The procedures are same both for the palm rest without the fingerprint sensor and for the palm rest with the fingerprint sensor. v In models xxU and xxF, this FRU is secured by using a tamper resistant torx head screw (TR7). (continued) 88 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 3a 3 1 1 1 1 2 Step Icon Screw cap Screw (quantity) Color Torque 1 1 M2 × 4 mm, small-head, nylon-coated (4) Black 0.245 Nm (2.5 kgfcm) 2 2 M2 × 5 mm, bind-head, nylon-coated (1) Silver 0.245 Nm (2.5 kgfcm) 3 Models with a 802.11a/b wireless LAN Mini PCI adapter 4 — M2 × 14 mm, TR7, nylon-coated (2) Black 0.204 Nm (2.0 kgfcm) Models with other type of Mini PCI adapter 3a 4 — M2 × 14 mm, bind-head, nylon-coated (2) Black 0.204 Nm (2.0 kgfcm) 4 — Special screw (1) Black 0.204 Nm (2.0 kgfcm) Note: Screw 3a is not available in models xxE and xxJ. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 89 Removing and replacing a FRU For a model with a touch pad, detach the touch pad connector by pulling the tab with your fingers in the direction of arrow 4. Then remove the palm rest in the direction of arrow 5. For other models, skip step 4. 4 5 When installing: On a model with a touch pad, make sure that connector 4 is firmly attached. Note for LG-IBM models (Korea) in T40/T40p series: New palm rest FRU is shipped with the LG-IBM logo plate. When you replace the palm rest, you need to stick the LG-IBM logo plate as shown in this figure. 15 mm 15 mm 90 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models) For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 Note In models with the fingerprint sensor, the sensor has been attached to the keyboard bezel FRU as the child part. In case of the fingerprint sensor has any defects and needs to be replaced, you need to replace the keyboard bezel by following the procedures in this section. The procedures are same both for the keyboard bezel without the fingerprint sensor and for the keyboard bezel with the fingerprint sensor. 1 1 1 Step 1 Icon 1 Screw (quantity) Color Torque M2 × 5 mm, flat-head, nylon-coated (6) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 91 Removing and replacing a FRU 2 2 2 2 2 Step Icon 2 2 Screw (quantity) Color Torque M2 × 14 mm, bind-head, nylon-coated (6) Black 0.245 Nm (2.5 kgfcm) 3 4 92 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU When installing: 1. Place the keyboard bezel so that the three latches are fixed in place 1. 1 While inserting the three latches, align the top-left corner of the keyboard bezel as in figure a. a (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 93 Removing and replacing a FRU 2. Press the left edges 2 and the front edges 3 of the keyboard bezel until the latches are snapped. 2 2 3 3 3. Attach the touch pad connector 4. 4 (continued) 94 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 4. Secure the keyboard bezel from the underside of the computer with the screws b and c. b b 1 c c c c 2 5. Attach the keyboard. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 95 Removing and replacing a FRU 6. Secure the keyboard bezel from the underside of the computer with the screw d. This screw cannot be fastened properly without attaching keyboard. d 2 96 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1120 Mini PCI adapter For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 If the wireless antenna jacks have tabs marked ″MAIN″ or ″AUX″, unplug the jacks by pulling the tabs with your fingers. If the antenna jacks do not have the tabs, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug it in direction of the arrow 1 and 2. 1 2 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 97 Removing and replacing a FRU 4 3 3 When installing: Plug in the wireless antenna cable as follows: Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter or Intel PRO Wireless 2200BG Mini-PCI Adapter In case of the antenna jacks have the tabs, plug the gray antenna cable with the tab marked MAIN into jack M, and the black antenna cable with the tab marked AUX into jack A. In case of the antenna jacks do not have the tabs, plug the gray cable to jack M, and the black cable to jack A. MAIN AUX 98 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Cisco Aironet Wireless 802.11b In case of the antenna jacks have the tabs, plug the gray antenna cable with the tab marked MAIN into jack M, and the black antenna cable with the tab marked AUX into jack A. In case of the antenna jacks do not have the tabs, plug the gray cable to jack M, and the black cable to jack A. MAIN AUX MAIN AUX ThinkPad T40/T40p, T41/T41p, T42/T42p Series 99 Removing and replacing a FRU ThinkPad Dual-Band 11a/b Wi-Fi Wireless Mini PCI Adapter, ThinkPad 11a/b/g Wireless LAN Mini PCI Adapter, or ThinkPad 11b/g Wireless LAN Mini PCI Adapter In case of the antenna jacks have the tabs, plug the gray antenna cable with the tab marked MAIN into jack MAIN, and the black antenna cable with the tab marked AUX into jack AUX. In case of the antenna jacks do not have the tabs, plug the gray cable to jack MAIN, and the black cable to jack AUX. MAIN AUX Insert the notched end of the card into the socket, and then press the card firmly. Pivot the card until it snaps into place. Make sure that it is firmly fixed in the slot and does not move easily. 100 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1130 Fan assembly For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 1 Step Screw (quantity) Color Torque 1 M2 × 10 mm, flat-head, nylon-coated (3) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 101 Removing and replacing a FRU Important In step 2, insert the tip of the tool horizontally between the fan assembly and the CPU, as indicated by arrow a. Then slightly push the tool into the gap until the fan assembly comes off. Do not move the tool upward or downward to remove the fan assembly between the gap. To do so, the CPU or the other electrical component may be damaged. 2 a (continued) 102 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Important In step 2a and 2b, be careful not to damage the copper plate of the fan assembly. Step 2a is for the fan assembly, long and for the fan assembly, long M10. Step 2b is for the fan assembly, short. Distortion of the fan assembly may cause a thermal problem. 2a 2b (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 103 Removing and replacing a FRU 3 4 When installing: Make sure that the connector 4 is firmly attached. 104 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU When installing: Apply thermal grease on the part marked a as in the following figures. a Figure 1. Fan assembly, short Only in the case of Fan assembly, long, you need to peel the plastic sheet b off on the thermal rubber before you place it on the system board. Fan assembly, long M10 DOES NOT have the plastic sheet. a b Figure 2. Fan assembly, long a Figure 3. Fan assembly, long M10 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 105 Removing and replacing a FRU 1140 Backup battery for 14.1-in. LCD models DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 1 (continued) 106 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2 When installing: Make sure that the battery connector 2 is firmly attached. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 107 Removing and replacing a FRU 1150 Backup battery for 15.0-in. LCD models DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 1 (continued) 108 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2 When installing: Make sure that the battery connector 2 is firmly attached. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 109 Removing and replacing a FRU 1160 Speaker assembly For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 1 Step Screw (quantity) Color Torque 1 M2 × 10 mm, flat-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) (continued) 110 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU In step 3, release the speaker cables from the cable guide. 2 4 3 When installing: Make sure that the connector 4 is firmly attached. Then route the cable as in 3. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 111 Removing and replacing a FRU 1170 Keyboard bezel for 14.1-in. LCD models For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 1 1 Step Screw (quantity) Color Torque 1 M2 × 19 mm, bind-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) (continued) 112 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2 a a 3 b 3 a Step Screw (quantity) Color Torque 2 Black 0.245 Nm (2.5 kgfcm) M2 × 4 mm, bind-head, nylon-coated (1) In step 3, make sure that all the latches marked a are detached, and then remove the bezel. When installing: Make sure that all the latches marked a are firmly attached. Attach harness left (b), and then secure the keyboard bezel with the screws. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 113 Removing and replacing a FRU 1180 PC Card slot assembly for 14.1-in. LCD models For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1160 Speaker assembly” on page 110 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 1 Step Screw (quantity) Color Torque 1 M2 × 4 mm, bind-head, nylon-coated (2) Black 0.204 Nm (2.0 kgfcm) (continued) 114 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2 When installing: Make sure that the connector on the underside of the PC card slot 2 is firmly attached, and then secure the slot with the screws. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 115 Removing and replacing a FRU 1190 PC Card slot assembly for 15.0-in. LCD models For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1160 Speaker assembly” on page 110 1 Step Screw (quantity) Color Torque 1 M2 × 5 mm, flat-head, nylon-coated (2) Black 0.204 Nm (2.0 kgfcm) (continued) 116 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2 3 Step Screw (quantity) Color Torque 2 M2 × 4 mm, bind-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) 4 When installing: Make sure that the connector on the underside of the PC card slot 2 is firmly attached, and then secure the slot with the screws. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 117 Removing and replacing a FRU 1200 LCD assembly for 14.1-in. LCD models For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1120 Mini PCI adapter” on page 97 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 1 1 1 1 Step Screw (quantity) Color Torque 1 M2.5 × 4.8 mm, bind-head, nylon-coated (4) Black 0.392 Nm (4 kgfcm) (continued) 118 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 3 2 4 Step Screw (quantity) Color Torque 2 M2 × 14 mm, bind-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) After removing the screw, remove bracket 3. Then detach the LCD connector 4. When installing: Make sure that the bracket 3 and the connector 4 are firmly attached, and then secure them with the screw. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 119 Removing and replacing a FRU 5 Step Screw (quantity) Color Torque 5 M2 × 10 mm, flat-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) (continued) 120 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Release the antenna cables from the cable guide 6. 6 6 6 6 6 6 When installing: Make sure that the antenna cables are correctly routed and securely in place. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 121 Removing and replacing a FRU 7 7 When installing: Make sure that the security keyhole which is on the left-rear corner of the base cover and the keyhole of the bracket inside are aligning firmly. 122 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1210 LCD assembly for 15.0-in. LCD models For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1120 Mini PCI adapter” on page 97 1 1 Step Screw (quantity) Color Torque 1 M2 × 10 mm, flat-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 123 Removing and replacing a FRU 2 3 Step Screw (quantity) Color Torque 2 M2 × 12 mm, flat-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) When installing: Make sure that the connector 3 is firmly attached, and then secure it with the screw. (continued) 124 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 4 4 Step Screw (quantity) Color Torque 4 M2 × 10 mm, flat-head, nylon-coated (3) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 125 Removing and replacing a FRU Release the antenna cables from the cable guide 5. 5 5 5 5 5 When installing: Make sure that the antenna cables are correctly routed and securely in place. (continued) 126 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 6 6 When installing: Make sure that the security keyhole which is on the left-rear corner of the base cover and the keyhole of the bracket inside are aligning firmly. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 127 Removing and replacing a FRU 1220 CPU For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 v “1200 LCD assembly for 14.1-in. LCD models” on page 118 v “1130 Fan assembly” on page 101 Rotate the head of the screw in the direction shown by arrow 1 to release the lock; then remove the CPU 2. 1 b a 2 When installing: Place the CPU on the CPU socket a, and then rotate the head of the screw in the direction shown by arrow b to secure the CPU. 128 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1230 Ultrabay Slim guide rail assembly for 14.1-in. LCD models For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1160 Speaker assembly” on page 110 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 v “1180 PC Card slot assembly for 14.1-in. LCD models” on page 114 v “1200 LCD assembly for 14.1-in. LCD models” on page 118 2 1 Step Screw (quantity) Color Torque 1 M2 × 14 mm, bind-head, nylon-coated (1) Black 0.204 Nm (2.0 kgfcm) 2 M2 × 4 mm, bind-head, nylon-coated (1) Black 0.204 Nm (2.0 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 129 Removing and replacing a FRU 3 5 4 3 4 Step Screw (quantity) Color Torque 3 M2 × 10 mm, flat-head, nylon-coated (3) Black 0.245 Nm (2.5 kgfcm) 4 M2 × 3 mm, small-head, nylon-coated (3) Silver 0.245 Nm (2.5 kgfcm) In step 5, remove the Ultrabay Slim guide rail assembly and the hard disk drive guide rail together. Separate the Ultrabay Slim guide rail assembly a and the hard disk drive guide rail b. a b 6 6 130 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 1240 Ultrabay Slim guide rail assembly for 15.0-in. LCD models For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1160 Speaker assembly” on page 110 1 2 Step Screw (quantity) Color Torque 1 M2 × 5 mm, flat-head, nylon-coated (2) Black 0.204 Nm (2.0 kgfcm) 2 M2 × 14 mm, bind-head, nylon-coated (1) Black 0.204 Nm (2.0 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 131 Removing and replacing a FRU 3 5 3 3 4 Step Screw (quantity) Color Torque 3 M2 × 10 mm, flat-head, nylon-coated (5) Black 0.245 Nm (2.5 kgfcm) 4 M2 × 4 mm, bind-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) In step 5, remove the Ultrabay Slim guide rail assembly and the hard disk drive guide rail together. (continued) 132 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Separate the Ultrabay Slim guide rail assembly a and the hard disk drive guide rail b. a b 6 6 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 133 Removing and replacing a FRU 1250 VGA and Ultrabay Slim device eject button cable For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 v “1200 LCD assembly for 14.1-in. LCD models” on page 118 v “1210 LCD assembly for 15.0-in. LCD models” on page 123 v “1230 Ultrabay Slim guide rail assembly for 14.1-in. LCD models” on page 129 v “1240 Ultrabay Slim guide rail assembly for 15.0-in. LCD models” on page 131 1 2 3 Step Screw (quantity) Color Torque 2 Hex stud (2) Silver 0.392 Nm (4 kgfcm) (continued) 134 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 4 6 5 Step Screw (quantity) Color Torque 4 M2 × 4 mm, bind-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) When installing: Make sure that the connector 1 is firmly attached. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 135 Removing and replacing a FRU 1260 System board and base cover for 14.1-in. LCD models For access, remove these FRUs, in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1030 Ultrabay Slim device” on page 74 v “1040 Hard disk drive” on page 75 v “1050 DIMM (optional)” on page 77 v “1060 Keyboard” on page 79 v “1070 DIMM (standard)” on page 83 v “1080 Modem daughter card (MDC/MDC-2)” on page 84 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1120 Mini PCI adapter” on page 97 v “1130 Fan assembly” on page 101 v “1140 Backup battery for 14.1-in. LCD models” on page 106 v “1160 Speaker assembly” on page 110 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 v “1180 PC Card slot assembly for 14.1-in. LCD models” on page 114 v “1200 LCD assembly for 14.1-in. LCD models” on page 118 v “1220 CPU” on page 128 v “1230 Ultrabay Slim guide rail assembly for 14.1-in. LCD models” on page 129 v “1250 VGA and Ultrabay Slim device eject button cable” on page 134 136 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Important notice for handling the system board in ThinkPad T40 series: There are two types of system board FRU for the ThinkPad T40 series, as follows: v System board with the security chip (bottom view) Note: The security chip a is embedded on the underside of the system board. a ThinkPad T40/T40p, T41/T41p, T42/T42p Series 137 Removing and replacing a FRU v System board without the security chip (bottom view) Begin by checking the FRU number of the system board, and be sure to use the correct system board for the computer. For the FRU numbers, see “Parts list” on page 190. Important If the ThinkPad computer you are servicing has a security chip, bear the following in mind: v Do not remove the security chip from the system board. If the security chip is removed by accident, reinstall it on the system board immediately. Make sure that it is firmly fixed on the system board and does not move easily. v The security chip cannot be used with any other system board. v The system board cannot be used with any other security chip. v The system board cannot be used without the security chip. v If you return a defective system board, you must check whether the security chip is embedded. If it is not, the board may not be covered under warranty. 138 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Important notice for handling the system board in ThinkPad T41 series: In ThinkPad T41 series, the security chip a is soldered on the underside of the system board as in this figure. a In ThinkPad T41 series, accelerometer chip for the HDD Active Protection System b is also soldered on the topside of the system board. b ThinkPad T40/T40p, T41/T41p, T42/T42p Series 139 Removing and replacing a FRU Important When handling the system board in ThinkPad T41 series, bear the following in mind. v The system board of the ThinkPad T41 series has an accelerometer, which can be broken by applying several thousands of G-forces. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G’s of shock. v Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. v If a system board is dropped, you must test it, using PC-Doctor for DOS, to make sure that the HDD Active Protection still functions (see below). Note: If the test shows that HDD Active Protection is not functioning, be sure to document the drop in any reject report, and replace the system board. v Avoid rough handling of any kind. v At every point in the process, be sure not to drop or stack the system board. v If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. After replacing the system board, run PC-Doctor for DOS to make sure that HDD Active Protection still functions. The procedure is as follows: 1. Place the computer on a horizontal surface. 2. Run Diagnostics --> Other Devices --> HDD Active Protection Test. Attention: Do not apply physical shock to the computer while the test is running. 140 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Before removing the system board, remove the support structure (a) and the cable guide (b). b 2 2 a 3 1 When installing: Make sure that the connectors 2 are firmly attached to the system board. 5 4 Step Screw (quantity) Color Torque 4 M2 × 10 mm, flat-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) 5 M2.5 × 4 mm, bind-head, nylon-coated (1) Black 0.392 Nm (4 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 141 Removing and replacing a FRU 7 6 d c 8 Step Screw (quantity) Color Torque 6 M2 × 3 mm, small-head, nylon-coated (1) Silver 0.245 Nm (2.5 kgfcm) 7 M2 × 10 mm, flat-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) In step 8, remove the I/O plate bracket (c) and the system board (d) together. (continued) 142 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 10 9 11 Step Screw (quantity) Color Torque 9 Hex stud (2) Silver 0.392 Nm (4 kgfcm) 10 M2.5 × 3 mm, bind-head, nylon-coated (1) Gold 0.392 Nm (4 kgfcm) When installing: Attach the system board so that the two small projections on the base cover fit into the holes provided, and then secure the system board with the screw. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 143 Removing and replacing a FRU Note for sticking a label kit on the base cover New base cover FRU is shipped with several kinds of label kit. When you replace the base cover, you need to stick a homologation label a which has the same part no. with the label on the old base cover (defective FRU) on the new base cover. In some models, you also need to stick one or two FCC labels b. Check the old base cover and if there is one or two FCC labels on it, find the same one from the label kit and stick it on the new base cover. Stick the labels on the new base cover as shown in this figure. b b 144 T40/T40p, T41/T41p, T42/T42p a Removing and replacing a FRU 1270 System board, interposer card, and base cover for 15.0-in. LCD models For access, remove these FRUs, in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1030 Ultrabay Slim device” on page 74 v “1040 Hard disk drive” on page 75 v “1050 DIMM (optional)” on page 77 v “1060 Keyboard” on page 79 v “1070 DIMM (standard)” on page 83 v “1080 Modem daughter card (MDC/MDC-2)” on page 84 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1120 Mini PCI adapter” on page 97 v “1130 Fan assembly” on page 101 v “1150 Backup battery for 15.0-in. LCD models” on page 108 v “1160 Speaker assembly” on page 110 v “1190 PC Card slot assembly for 15.0-in. LCD models” on page 116 v “1210 LCD assembly for 15.0-in. LCD models” on page 123 v “1220 CPU” on page 128 v “1240 Ultrabay Slim guide rail assembly for 15.0-in. LCD models” on page 131 v “1250 VGA and Ultrabay Slim device eject button cable” on page 134 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 145 Removing and replacing a FRU Important notice for handling the system board in ThinkPad T42 series: In ThinkPad T42 series, the security chip a is soldered on the underside of the system board as in this figure. a In ThinkPad T42 series, accelerometer chip for the HDD Active Protection System b is also soldered on the topside of the system board. b 146 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Important When handling the system board in ThinkPad T42 series, bear the following in mind. v The system board of the ThinkPad T42 series has an accelerometer, which can be broken by applying several thousands of G-forces. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G’s of shock. v Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. v If a system board is dropped, you must test it, using PC-Doctor for DOS, to make sure that the HDD Active Protection still functions (see below). Note: If the test shows that HDD Active Protection is not functioning, be sure to document the drop in any reject report, and replace the system board. v Avoid rough handling of any kind. v At every point in the process, be sure not to drop or stack the system board. v If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. After replacing the system board, run PC-Doctor for DOS to make sure that HDD Active Protection still functions. The procedure is as follows: 1. Place the computer on a horizontal surface. 2. Run Diagnostics --> Other Devices --> HDD Active Protection Test. Attention: Do not apply physical shock to the computer while the test is running. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 147 Removing and replacing a FRU Remove the support structure a and the EMI bracket b. 2 b 3 a 1 Step Screw (quantity) Color Torque 2 M2 × 10 mm, flat-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) (continued) 148 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 7 6 c 5 6 4 Step Screw (quantity) Color Torque 4 M2 × 10 mm, flat-head, nylon-coated (1) Black 0.245 Nm (2.5 kgfcm) 5 M2.5 × 4.8 mm, bind-head, nylon-coated (1) Black 0.392 Nm (4 kgfcm) Remove two connectors 6 and then remove the cable guide c in the direction of arrow 7. When installing: Make sure that the connectors 6 are firmly attached to the system board. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 149 Removing and replacing a FRU 8 8 e d 9 Step Screw (quantity) Color Torque 8 M2 × 4 mm, bind-head, nylon-coated (3) Black 0.245 Nm (2.5 kgfcm) In step 9, remove the I/O plate bracket (d) and the system board (e) together. When installing: Attach the system board so that the two small projections on the base cover fit into the holes provided, and then secure the system board with the screw. (continued) 150 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 10 11 f g 12 13 Step Screw (quantity) Color Torque 10 Hex stud (2) Silver 0.392 Nm (4 kgfcm) 11 M2.5 × 3 mm, flat-head, nylon-coated (1) Gold 0.392 Nm (4 kgfcm) Remove the system board g from the I/O plate bracket f in the direction of arrow 12. Then remove the interposer card 13. When installing: Make sure that the connectors of the interposer card are firmly attached to the system board. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 151 Removing and replacing a FRU Note for sticking a label kit on the base cover New base cover FRU is shipped with several kinds of label kit. When you replace the base cover, you need to stick a homologation label a which has the same part no. with the label on the old base cover (defective FRU) on the new base cover. In some models, you also need to stick one or two FCC labels b. Check the old base cover and if there is one or two FCC labels on it, find the same one from the label kit and stick it on the new base cover. Stick the labels on the new base cover as shown in this figure. b b a 152 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2010 LCD front bezel for 14.1-in. LCD models For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1120 Mini PCI adapter” on page 97 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 v “1200 LCD assembly for 14.1-in. LCD models” on page 118 1 1 3 2 3 2 3 3 2 3 3 Step Screw cap Screw (quantity) Color Torque 1 M2 × 3 mm, pan-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) 2 M2.5 × 4.8 mm, bind-head, nylon-coated (3) Black 0.392 Nm (4 kgfcm) 3 M2 × 3 mm, pan-head, nylon-coated (6) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 153 Removing and replacing a FRU 4 5 Note for LG-IBM models (Korea) in T41/T41p series: New LCD front bezel FRU is shipped with clear plate FRU. When you replace the LCD front bezel, you need to stick the LG-IBM logo plate which is contained in the clear plate FRU as shown in this figure. 7 mm 21 mm 154 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2020 LCD front bezel for 15.0-in. LCD models For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1120 Mini PCI adapter” on page 97 v “1210 LCD assembly for 15.0-in. LCD models” on page 123 1 1 1 1 Step Screw cap 1 Screw (quantity) Color Torque M2 × 4 mm, bind-head, nylon-coated (4) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 155 Removing and replacing a FRU 3 2 Note for LG-IBM models (Korea) in T42/T42p series: New LCD front bezel FRU is shipped with clear plate FRU. When you replace the LCD front bezel, you need to stick the LG-IBM logo plate which is contained in the clear plate FRU as shown in this figure. 7 mm 21 mm 156 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2030 Inverter card for 14.1-in. LCD models For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1120 Mini PCI adapter” on page 97 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 v “1200 LCD assembly for 14.1-in. LCD models” on page 118 v “2010 LCD front bezel for 14.1-in. LCD models” on page 153 2 1 3 4 Step Screw (quantity) Color Torque 1 M2 × 3 mm, small-head, nylon-coated (1) Silver 0.245 Nm (2.5 kgfcm) When installing: Make sure that connectors 2 and 3 are firmly attached. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 157 Removing and replacing a FRU Cable routing: When replacing the inverter card, route the connector cable as in this figure: 158 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2040 Inverter card for 15.0-in. LCD models For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1120 Mini PCI adapter” on page 97 v “1210 LCD assembly for 15.0-in. LCD models” on page 123 v “2020 LCD front bezel for 15.0-in. LCD models” on page 155 1 2 3 When installing: Make sure that connectors 2 and 3 are firmly attached. Cable routing: When replacing the inverter card, route the connector cable as in this figure: ThinkPad T40/T40p, T41/T41p, T42/T42p Series 159 Removing and replacing a FRU 2050 Wireless antenna assemblies, LCD panel, LCD cable assembly, hinges, and LCD cover for 14.1-in. LCD models For access, remove these FRUs in order: v “1010 Battery pack for 14.1-in. LCD models” on page 71 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)” on page 88 v “1120 Mini PCI adapter” on page 97 v “1170 Keyboard bezel for 14.1-in. LCD models” on page 112 v “1200 LCD assembly for 14.1-in. LCD models” on page 118 v “2010 LCD front bezel for 14.1-in. LCD models” on page 153 v “2030 Inverter card for 14.1-in. LCD models” on page 157 Note: Step 1 to 5 are only for the models with the Bluetooth wireless features. For the other models, skip step 1 to 5. 2 1 (continued) 160 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Peel the tape securing the Bluetooth wireless antenna assembly 3. 3 5 4 4 Step Screw (quantity) Color Torque 4 M2 × 2.7 mm, small-head, nylon-coated (2) Yellow 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 161 Removing and replacing a FRU In step 6, remove the latch bar as in this figure. 6 Lift the latch bar in the direction of the arrow 7, and then remove the left latch in the direction of the arrow 8. 8 7 (continued) 162 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 9 Step Screw (quantity) Color Torque 9 M2 × 3 mm, small-head, nylon-coated (1) Silver 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 163 Removing and replacing a FRU Slide the spiral tube binding the antenna cables (10a), and then release the cables from the cable guide (10b). Lift the LCD panel in the direction of arrow 11, and detach the wireless LAN antenna 12 and the ThinkLight 13. Then remove the LCD panel in the direction of arrow 14. 12 13 14 11 10b 10a (continued) 164 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Remove the antenna assembly a and hinges b from the LCD assembly. a 15 16 16 17 17 b 16 b 16 Step Screw (quantity) Color Torque 16 M2 × 3 mm, small-head, nylon-coated (4) Silver 0.245 Nm (2.5 kgfcm) Remove two screws c, and detach the wireless AUX antenna cable (c) from the right hinge. 20 19 18 c 18 Step Screw (quantity) Color Torque 18 M2 × 3 mm, small-head, nylon-coated (2) Silver 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 165 Removing and replacing a FRU Turn over the LCD panel and strip off the tape 21 securing the FPC (c). Then detach the connector 22 in the direction of the arrow. 21 c (continued) 166 T40/T40p, T41/T41p, T42/T42p 22 Removing and replacing a FRU Remove the right latch from the LCD cover. 23 24 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 167 Removing and replacing a FRU When installing: Follow these steps when you reassemble the LCD unit. 1. Attach the left latch to the LCD cover. 1 2 (continued) 168 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2. Paste three gaskets only for the models with Bluetooth wireless features. For the other models, skip this step. 95.5 mm 68.5 mm 41.5 mm 3. Connect the LCD cable assembly to the LCD panel and secure it with the tape. 4. Attach the wireless LAN antenna cables (MAIN, AUX) and the hinges to the LCD panel. 5. Attach the LCD panel to the LCD cover. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 169 Removing and replacing a FRU 6. Route the wireless LAN antenna cables as in the following drawings: a. 1 2 3 3 (continued) 170 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU b. 4 4 c. 5 5 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 171 Removing and replacing a FRU d. Coil the spiral tube round the antenna cables. 6 e. Slide the spiral tube in the direction shown by arrow 7. 7 (continued) 172 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Move the spiral tube until it reaches at the cable guide of the LCD cover as in this figure. Make sure that the antenna cable is not pinched by cable clip (a). 8 a 7. Secure the LCD panel with the screws. 8. Attach the right latch to the LCD cover. 1 2 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 173 Removing and replacing a FRU Note for LG-IBM models (Korea) in T40/T40p series: New LCD cover FRU is shipped with the LG-IBM logo plate. When you replace the LCD cover, you need to stick the LG-IBM logo plate as shown in this figure. 10 mm 15 mm Note for LG-IBM models (Korea) in T41/T41p series: New LCD cover FRU is shipped with clear plate FRU. When you replace the LCD cover, you need to stick the LG-IBM logo plate which is contained in the clear plate FRU as shown in this figure. 22 mm 16 mm 174 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 2060 Wireless antenna assemblies, LCD panel, LCD cable assembly, hinges, and LCD cover for 15.0-in. LCD models For access, remove these FRUs in order: v “1020 Battery pack for 15.0-in. LCD models” on page 73 v “1040 Hard disk drive” on page 75 v “1060 Keyboard” on page 79 v “1090 Bluetooth/Modem daughter card (BMDC/BMDC-2)” on page 86 v “1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for 15.0-in. LCD models)” on page 91 v “1120 Mini PCI adapter” on page 97 v “1210 LCD assembly for 15.0-in. LCD models” on page 123 v “2020 LCD front bezel for 15.0-in. LCD models” on page 155 v “2040 Inverter card for 15.0-in. LCD models” on page 159 1 1 1 1 1 1 Step Screw (quantity) Color Torque 1 M2 × 4 mm, bind-head, nylon-coated (7) Black 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 175 Removing and replacing a FRU Release the antenna cables 2. At the parts indicated by arrows a, the antenna cables go through the hinges. When you route the antenna cables, attach the cables firmly. a 2 2 2 a (continued) 176 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 4 5 3 b 6 6 7 b 7 6 6 Step Screw (quantity) Color Torque 6 M2 × 3 mm, bind-head, nylon-coated (4) Silver 0.245 Nm (2.5 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 177 Removing and replacing a FRU Turn over the LCD panel, and detach the connector 8 in the direction of the arrow. 8 When installing: Make sure that the FPC connector is firmly attached to the LCD panel. (continued) 178 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 10a 11 10b 12 9 9 d Note: Step 9 is only for the models with the Bluetooth wireless features. For the other models, skip this step. Step Screw (quantity) Color Torque 9 M2 × 4 mm, bind-head, nylon-coated (2) Black 0.245 Nm (2.5 kgfcm) Remove the hinges 10a, 10b and the wireless LAN antenna cables 11, 12 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 179 Removing and replacing a FRU Cable routing: When you reassemble the LCD unit, do as follows: At the left-top corner of the LCD unit, route the antenna cable as in a. Do not route the cable over the bracket. To do so, the cable might be pinched between the LCD front bezel and the LCD cover, and the cable or the other parts might be damaged or might not be installed properly. At the points shown as V, route the cable as it goes under the projections as in b. At the points shown as , push the cable into the ditch between the LCD cover and the bracket by using a screwdriver as in c. a b b c (continued) 180 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Then route the cables to along the cable guides of the LCD cover. When you route the cables around the LCD hinges, do as shown in c. c c ThinkPad T40/T40p, T41/T41p, T42/T42p Series 181 Removing and replacing a FRU 3010 ThinkPad Dock II PCI cover 1 1 2 (Bottom view) 182 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU 3020 ThinkPad Dock II top cover 1 1 1 (Rear view) Step Screw (quantity) Torque 1 M2.5 × 4.8 mm (3) 0.392 Nm (4 kgfcm) 2 2 2 2 Step Screw (quantity) Torque 2 M2.5 × 4.8 mm (4) 0.392 Nm (4 kgfcm) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 183 Removing and replacing a FRU 3 3 (Bottom view) Step Screw (quantity) Torque 3 M2.5 × 4.8 mm (6) 0.392 Nm (4 kgfcm) (continued) 184 T40/T40p, T41/T41p, T42/T42p Removing and replacing a FRU Make sure that the system lock key A is set to the Unlock position. Release the front latches in step 4, and then remove the top cover 5. Then detach the connector cable 6 as in the figure. 5 A 4 6 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 185 Locations Locations Front view 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 186 Wireless status indicator Bluetooth wireless status indicator (for some models) System status indicators Power status indicators External monitor connector Ultrabay Slim status indicator Ultrabay Slim latch Ultrabay Slim device eject lever Ultrabay Slim TrackPoint pointing stick Fingerprint sensor (for some models) TrackPoint buttons Touch pad buttons Touch pad UltraNav Access IBM button Volume control buttons Power switch ThinkLight T40/T40p, T41/T41p, T42/T42p Locations 19 1 2 18 17 16 3 4 14 13 10 15 12 11 9 8 7 6 5 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 187 Locations Rear view 1 2 3 4 5 6 7 8 9 10 11 12 13 Power status indicators Bluetooth wireless status indicator PC Card eject buttons PC Card slots Microphone jack Stereo headphone jack RJ-45 (Ethernet) connector RJ-11 (modem) connector TV-out connector Universal serial bus (USB) connectors Security keyhole Parallel connector AC power connector 2 1 3 4 5 6 13 188 12 11 10 9 T40/T40p, T41/T41p, T42/T42p 8 7 Locations Bottom view 1 2 3 4 5 6 7 8 9 Hard disk drive Optional DIMM slot Battery pack Battery pack lock (only for 14.1-in LCD models) Docking connector Battery pack latch Infrared port Built-in stereo speakers LCD latch 2 1 3 4 5 6 9 8 7 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 189 Parts list Parts list v Each FRU is available for all types or models, unless specific types or models are specified. v A CRU (customer replaceable unit) is identified by a single asterisk (*) or two asterisks (**) in the CRU ID column. An N in the CRU ID column means the part is not a CRU. A single asterisk (*) means the part is a Tier 1 CRU; two asterisks (**) means the part is a Tier 2 CRU. v FRUs marked with OP are available as options. 190 T40/T40p, T41/T41p, T42/T42p Parts list Overall 1 22 21 2 a 20 3 b f 4 19 c 18 5 8 17 6 d 7 16 15 e 9 14 23 10 13 11 12 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 191 Parts list No. FRU P/N CRU ID a- f See “Miscellaneous parts” on page 243. 1 LCD unit (see “14.1-in. LCD FRUs” on page 220 and “15.0-in. LCD FRUs” on page 230.) N 2 Keyboard bezel assembly (14.1-in.) 91P9540 N Keyboard bezel assembly (15.0-in.) 13R2921 N Keyboard bezel assembly with fingerprint sensor (15.0-in.) v 2373-F2x, F3x, F4x, F5x, H8x, H9x, HAx, HBx, JBx, KKx, L1x, L2x, L3x, L4x, L5x, L6x, L7x, L8x, N1x, N2x, N3x, N4x, N5x, Q1x, Q2x, Q3x, Q4x, Q5x, Q6x v 2374-L1x, Q2x v 2378-R2x, R8x, R9x, RSx, RTx, RUx, RVx v 2379-R8x, R9x, RUx, RVx 91P8685 N Ultrabay guide rail assembly (14.1-in.) 91P8394 N Ultrabay guide rail assembly (15.0-in.) 13R2920 N Ultrabay guide rail assembly with fingerprint sensor model (14.1-in.) v 2373-F1x, H1x, H2x, H3x, H4x, H5x, H6x, H7x, J4x, J6x, J7x, J8x, J9x, JAx, K1x, K2x, K3x, K5x, K6x, K7x, K8x, K9x, KAx, KBx, KCx, KDx, KEx, KFx, KGx, KHx, KJx, KLx, KMx, KNx, KPx, KQx, M1x, M2x, M3x, M4x, M5x, M6x, P1x, P2x, P3x, P4x v 2374-J4x, K1x, K2x, K5x v 2378-R1x, R5x, RPx, RQx, RRx v 2379-R1x, R5x 91P8682 N Ultrabay guide rail assembly with fingerprint sensor model (15.0-in.) v 2373-F2x, F3x, F4x, F5x, H8x, H9x, HAx, HBx, JBx, KKx, L1x, L2x, L3x, L4x, L5x, L6x, L7x, L8x, N1x, N2x, N3x, N4x, N5x, Q1x, Q2x, Q3x, Q4x, Q5x, Q6x v 2374-L1x, Q2x v 2378-R2x, R8x, R9x, RSx, RTx, RUx, RVx v 2379-R8x, R9x, RUx, RVx 91P8683 N 3 (continued) 192 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU 4 P/N CRU ID DVD drive 8x for T40/T40p, T41/T41p, T42 OP v 2373-14x, 16x, 1Bx, 24x, 2Bx, 47x, 54x, 58x, 61x, 66x, 6Bx, 6Dx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, BDx, C1x, C7x, C8x, CAx v 2373-1Hx, 1Lx, 5Hx, 6Kx, 6Sx, 8Hx, 8Jx, 8Kx, 8Px, 8Rx, 8Sx v 2373-1Ux, 1Yx, 2Tx, 2Yx, 2Zx, 6Ux, 8Tx, 8Vx, HYx, KZx v 2373-JEx, K2x, K3x, K8x, KAx, Q3x v 2374-14x, 82x, 8Cx v 2374-1Hx, 8Rx v 2374-8Tx v 2374-K2x v 2378-D1U, D2U v 2378-DEx, DFx v 2378-DTx, DVx v 2378-R3x, R7x HLDS 92P6579 * TEAC 92P5991 * DVD/CD-RW combo drive for T40/T40p, T41/T41p OP v 2373-12x, 19x, 22x, 25x, 29x, 2Ax, 2Cx, 33x, 42x, 44x, 4Ax, 4Bx, 4Cx, 51x, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 91x, 92x, 93x, 94x, 96x, 9Cx, B2x, B5x, C3x, C4x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-1Ex, 1Fx, 2Ex, 2Fx, 2Qx, 3Fx, 3Hx, 3Px, 4Fx, 4Gx, 4Hx, 4Px, 4Qx, 4Sx, 5Qx, 5Rx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 9Ex, 9Fx, 9Gx, 9Hx, 9Kx, BFx, BHx, BJx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2374-12x, 72x, 7Cx v 2374-1Fx, 3Hx, 4Hx, 7Fx, 7Jx, GGx v 2375-72x v 2376-72x v 2378-DGx, DHx, DJx, DKx v 2379-D3x, D4x, D5x, D6x KME 92P6581 * Toshiba 92P5993 * (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 193 Parts list No. FRU 4 P/N CRU ID DVD/CD-RW combo drive for T42/T42p OP v 2373-1Wx, 1Zx, 2Ux, 2Wx, 2Xx, 3Ux, 3Wx, 3Xx, 3Yx, 3Zx, 4Tx, 4Vx, 4Wx, 4Yx, 4Zx, 5Tx, 5Wx, 5Xx, 6Vx, 6Yx, 6Zx, 7Tx, 7Vx, 7Wx, 7Yx, 7Zx, 8Xx, 8Yx, 8Zx, 9Tx, 9Ux, 9Vx, 9Xx, CUx, CVx, CWx, CXx, FWx, FYx, GVx, GXx, GYx, GZx, HVx, JTx, JXx, KUx, KYx v 2373-F1x, F2x, JAx, JBx, JCx, JDx, JFx, K1x, K5x, K7x, K9x, KBx, KCx, KEx, KFx, KGx, KHx, KJx, KKx, KLx, KMx, KNx, KPx, KQx, L1x, L2x, L4x, L5x, L6x, L7x, L8x, M1x, M2x, M3x, N1x, N2x, N3x, P2x, P4x, Q2x, Q5x v 2374-1Wx, 3Xx, 4Wx, 6Vx, 6Yx v 2374-J4x, K1x, K5x, L1x, Q2x, v 2378-2Xx, 5Ux, DUx, DWx, DXx, FUx, FVx, FTx, FZx v 2378-R1x, R2x, R4x, R5x, R6x, R8x, R9x v 2379-5Vx, DZx, DXx v 2379-R1x, R6x, R8x, R9x PCC 13N6771 * HLDS 13N6769 * DVD-RAM/RW drive (PCC) for T42/T42p 92P6110 OP v 2373-3Vx, 4Ux, 7Xx, 9Zx, CYx, GRx, GSx, GTx, GUx, HTx, HXx, HWx, KTx, KXx v 2373-F3x, F4x, F5x, KDx, L3x, M4x, M5x, M6x, N4x, N5x, P1x, P3x, Q1x, Q4x, Q6x v 2374-3Vx, 7Xx, HTx v 2378-DYx v 2379-DYx * Travel cover v All models with suffix -xxE and -xxJ * 13N5108 For optional Ultrabay devices, see “Optional FRUs” on page 247. 5 Hard disk drive, 20 GB, 9.5 mm, 4,200 rpm for T40/T40p v Supported by CTO ThinkPad STD OP 92P6327 * Fujitsu 27L4385 * 13N6701 * Hard disk drive, 20 GB, 9.5 mm, 4,200 rpm, HGST for T42/T42p v Supported by CTO (continued) 194 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU 5 P/N CRU ID Hard disk drive, 30 GB, 9.5 mm, 4,200 rpm, ThinkPad STD for T40/T40p v 2373-12x, 14x, 16x, 19x, 1Bx, 51x, 58x, 61x, 66x, 6Bx, 6Dx, C1x v 2374-12x, 14x v 2378-D1U, D2U v 2379-D3U 92P6330 * Hard disk drive, 30 GB, 9.5 mm, 4,200 rpm, Fujitsu v 2373-12x, 14x, 16x, 19x, 1Bx, 51x, 58x, 61x, 66x, 6Bx, 6Dx, C1x v 2373-1Ex, 1Fx, 1Hx, 1Lx, 5Qx, 5Rx, 6Kx, 6Sx v 2373-1Ux, 1Wx, 1Yx, 1Zx, 5Wx v 2374-12x, 14x v 2374-1Hx, 1Fx v 2374-1Wx v 2378-D1U, D2U v 2378-DEx v 2378-DTx, DVx, FUx v 2379-D3U 92P6036 * Hard disk drive, 30 GB, 9.5 mm, 4,200 rpm, HGST for T41/T41p, T42 v 2373-1Fx, 1Hx, 6Kx, 6Sx, 5Qx, 5Rx v 2373-1Ux, 1Wx, 1Yx, 1Zx, 5Wx v 2373-JAx, JBx v 2374-1Hx, 1Fx v 2374-1Wx v 2374-J4x v 2378-2Zx, DTx, DVx, FUx v 2378-R3x, R7x 13N6703 * Hard disk drive, 40 GB, 9.5 mm, 5,400 rpm, Hitachi for T40/T40p v 2373-22x, 24x, 25x, 29x, 2Ax, 2Bx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 54x, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, B2x, B5x, BDx, C3x, C4x, C7x, C8x, CAx, G1x, G2x v 2374-2Ax, 2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2375-72x v 2376-72x v 2379-D4U, D6U 08K9834 * (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 195 Parts list No. FRU 5 Hard disk drive, 40 GB, 9.5 mm, 5,400 rpm ThinkPad STD for T40/T40p, T41/T41p OP v 2373-22x, 24x, 25x, 29x, 2Ax, 2Bx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 54x, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, B2x, B5x, BDx, C3x, C4x, C7x, C8x, CAx, G1x, G2x v 2373-2Ex, 2Fx, 2Px, 2Qx, 3Hx, 3Px, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Rx, 5Hx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8HU, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, BFx, BJx, BHx v 2374-2Ax, 2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2374-4Hx, 7Fx, 7Jx, 8Rx v 2375-72x v 2376-72x v 2378-DEx, DFx, DGx, DHx, DKx v 2379-D4U, D6U P/N CRU ID 92P6342 * Hard disk drive, 40 GB, 9.5 mm, 5,400 rpm for T40/T40p, T41/T41p, T42 v 2373-22x, 24x, 25x, 29x, 2Ax, 2Bx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 54x, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, B2x, B5x, BDx, C3x, C4x, C7x, C8x, CAx, G1x, G2x v 2373-2Ex, 2Fx, 2Px, 2Qx, 3Hx, 3Px, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Rx, 5Hx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8HU, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, BFx, BJx, BHx v 2373-2Tx, 2Ux, 2Wx, 2Xx, 2Yx, 3Ux, 3Wx, 3Xx, 3Yx, 4Tx, 4Ux, 4Wx, 4Yx, 4Zx, 5Tx, 5Xx, 6Ux, 6Vx, 6Wx, 6Yx, 6Zx, 7Tx, 7Vx, 7Wx, 7Yx, 7Zx, 8Tx, 8Ux, 8Vx, 8Xx, 8Yx, 8Zx, FTx, FVx, FWx, FYx, JTx, JXx v 2373-F1x, F2x, F5x, JCx, JDx, JEx, JFx, K1x, K2x, K3x, K5x, K6x, K7x, K8x, K9x, KAx, KBx, KCx, KDx, KEx, KGx, KHx, KJx, KLx, KNx, L1x, L2x, L3x, L4x, L5x, L6x, L7x v 2374-2Ax, 2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2374-4Hx, 7Fx, 7Jx, 8Rx v 2374-3Xx, 4Wx, 6Vx, 6Yx, 8Tx v 2374-K1x, K2x, K5x, L1x v 2375-72x v 2376-72x v 2378-DEx, DFx, DGx, DHx, DKx v 2378-2Xx, 5Ux, DUx, DWx, DXx, FZx v 2378-R1x, R2x, R4x, R5x, R6x, R8x v 2379-D4U, D6U v 2379-5Vx, DXx, DZx v 2379-R1x, R5x, R6x, R8x HGST 13N6801 * Fujitsu 13N6773 * (continued) 196 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU 5 6 7 P/N CRU ID Hard disk drive, 60 GB, 9.5 mm, 4,200 rpm, HGST for T40/T40p, T41/T41p v Supported by CTO 13N6707 * Hard disk drive, 60 GB, 9.5 mm, 5,400 rpm, HGST for T42/T42p v 2373-KPx, KQx, L3x, L8x 13N6803 * Hard disk drive, 60 GB, 9.5 mm, 7,200 rpm, HGST for T41/T41p, T42/T42p v 2373-3Fx, 4Sx, 9Ex, 9Fx, 9Gx, 9Jx, 9Hx, 9Kx, GEx, GGx, GHx, GJx, GKx, GLx v 2373-GRx, GSx, GTx, GUx, GVx, GXx, GYx, HTx, HVx, HWx, HXx, HYx, KTx, KUx, KXx, KZx v 2373-F4x, KKx, M3x, N3x, P1x, P2x, P3x, P4x, Q1x, Q2x, Q3x, Q4x, Q5x v 2374-GGx v 2374-HTx v 2374-Q2x v 2378-R9x v 2379-R9x 13N6807 * Hard disk drive, 80 GB, 9.5 mm, 4,200 rpm, ThinkPad STD for T40 OP v 2373-32x, 33x, 91x, 92x, 93x, 94x, 96x, 9Cx v 2374-9Cx v 2379-D5U 13N6709 * Hard disk drive, 80 GB, 9.5 mm, 5,400 rpm, HGST for T41p, T42/T42p v 2373-GMx v 2373-3Vx, 3Zx, 4Vx, 7Xx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, CUx, CVx, CWx, CXx, CYx, GZx v 2374-3Vx, 7Xx v 2378-DYx, EWx, EXx, EYx, EZx v 2379-DYx, EYx, EZx 13N6805 * Hard disk drive, 80 GB, 9.5 mm, 5,400 rpm, Fujitsu for T41p, T42/T42p v 2373-CUx, CVx, CWx, CXx, CYx v 2373-F3x, KFx, KMx, M1x, M2x, M4x, M5x, M6x, N1x, N2x, N3x, N4x, N5x, Q6x v 2374-7Xx v 2378-DYx, EWx, EXx, EYx, EZx, FZx v 2379-DYx, EYx, EZx 13N6793 * Cover, Hard disk drive (14.1-in.) 13N5530 * Cover, Hard disk drive (15.0-in.) 13R2922 * VGA and Ultrabay eject button cable (14.1-in.) 91P6788 N VGA and Ultrabay eject button cable (15.0-in.) 91P6828 N (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 197 Parts list No. FRU 8 P/N CRU ID Modem daughter card (MDC) for T40/T40p, T41/T41p v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Ax, 2Bx, 2Cx, 3Cx, 44x, 47x, 49x, 4Bx, 4Cx, 51x, 54x, 58x, 61x, 66x, 6Bx, 6Dx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, 91x, A3x, A4x, A5x, A6x, A7x, A8x, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Qx, 3Hx, 3Px, 4Hx, 4Nx, 4Qx, 4Sx, 5Hx, 5Qx, 5Rx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8Hx, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, 9Ex, AHx, AJx, AKx, ALx, AMx, BFx, BHx, BJx v 2374-12x, 14x, 2Ax, 2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2374-1Hx, 1Fx, 3Hx, 4Hx, 7Fx, 7Jx, 8Rx v 2375-72x v 2376-72x v 2378-D1U, D2U v 2378-DEx, DFx, DGx, DHx, EEx, EFx, EJx, EKx, ELx, ENx v 2379-D3U, D4U, D6U v 2379-DJx, DKx, ERx, ESx 91P7657 ** ThinkPad Integrated 56K Modem (MDC-2) for T42/T42p v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Yx, 2Zx, 3Vx, 3Wx, 3Xx, 3Yx, 4Tx, 4Ux, 4Vx, 4Wx, 4Yx, 5Tx, 5Wx, 5Xx, 6Ux, 6Vx, 6Wx, 6Yx, 7Tx, 7Vx, 7Wx, 7Xx, 7Yx, 8Tx, 8Ux, 8Vx, 8Xx, 8Yx, 8Zx, 9Tx, ATx, AUx, AVx, AYx, BTx, BVx, BXx, FTx, FVx, JTx, JXx v 2373-H1x, H2x, H4x, H5x, H8x, H9x, J1x, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x, JCx, JDx, JEx, K2x, K3x, K5x, K6x, K7x, K8x, KAx, KCx, KDx, KEx, KGx, KHx, KJx, KLx, KPx, KQx, L2x, L3x, L4x, L5x, L6x, L7x, L8x v 2374-1Wx, 3Vx, 3Xx, 4Wx, 6Vx, 6Yx, 7Xx, 8Tx v 2374-J4x, K2x, K5x v 2378-5Ux, DTx, DVx, DWx, DYx, FUx, FZx v 2378-R1x, R2x, R3x, R4x, R5x, R6x, R7x, R8x, RSx v 2379-5Vx, DYx, DZx v 2379-R1x, R5x, R6x, R8x 93P4166 ** (continued) 198 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU 8 9 P/N CRU ID ThinkPad Integrated Bluetooth with 56K 91P7315 Modem (BMDC) for T40/T40p, T41/T41p v 2373-32x, 33x, 42x, 4Ax, 92x, 93x, 94x, 96x, A1x, A2x, A9x, G1x, G2x, G3x, G4x, G5x, G6x, 9Cx v 2373-2Fx, 3Fx, 4Fx, 4Gx, 4Px, 9Fx, 9Gx, 9Jx, 9Hx, 9Kx, AFx, AEx, ANx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2374-9Cx v 2374-GGx v 2379-D5x v 2378-EMx, EPx ** ThinkPad Integrated Bluetooth III with 91P7319 56K Modem (BMDC-2) for T42/T42p v 2373-2Xx, 3Ux, 3Zx, 4Zx, 6Zx, 7Zx, 9Ux, 9Vx, 9Xx, 9Zx, AWx, AZx, BUx, BYx, BZx, CUx, CVx, CWx, CXx, CYx, FWx, FYx, GRx, GSx, GTx, GUx, GVx, GXx, GYx, GZx, HTx, HVx, HWx, HXx, HYx, KTx, KUx, KYx, KZx v 2373-Fxx, JAx, JBx, JFx, H3x, HAx, HBx, K1x, K9x, KBx, KFx, KKx, KMx, KNx, L1x, Mxx, Nxx, Pxx, Qxx v 2374-HTx v 2374-K1x, L1x, Q2x v 2378-2Xx, DUx, DXx v 2378-R9x v 2379-DXx v 2379-R9x ** 256-MB DDR SDRAM SO-DIMM (PC2100) for T40/T40p OP v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Bx, 32x, 33x, 49x, 4Ax, 51x, 54x, 58x, 61x, 66x, 6Bx, 6Dx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2374-12x, 14x, 72x, 75x, 7Cx, 82x, 8Cx v 2375-72x v 2376-72x v 2378-D1U, D2U v 2379-D3x, D4x, D5x, D6x 10K0031 * 512-MB DDR SDRAM SO-DIMM (PC2100) for T40/T40p OP v 2373-2Ax, 2Cx, 42x, 44x, 47x, 4Bx, 4Cx, 91x, 92x, 93x, 94x, 96x, 9Cx, G1x, G2x, G3x, G5x v 2374-2Ax, 2Cx, 44x, 4Cx, 9Cx v 2379-D5x 10K0033 * (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 199 Parts list No. FRU 9 P/N CRU ID 31P9829 * 256-MB DDR SDRAM SO-DIMM 31P9831 (PC2700) for T41/T41p, T42/T42p OP v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 3Fx, 4Nx, 4Px, 5Hx, 5Qx, 5Rx, 6Kx, 6Sx, 7Ex, 7Kx, 7Mx, 8Kx, 8Rx v 2373-1Ux, 1Wx, 1Yx, 2Tx, 2Ux, 2Wx, 2Xx, 2Yx, 2Zx, 3Zx, 5Wx, 5Xx, 6Wx, 7Tx, 7Vx, 7Yx, 7Zx, 8Tx, 8Ux, 8Vx, FTx, FVx v 2373-J1x, J2x, J3x, J4x, J5x, J6x, J9x, JAx, JBx, JCx, JDx, JEx, JFx, K2x, K6x, K7x, K8x, KAx, KBx, KFx, KLx, KMx v 2374-1Fx, 1Hx, 8Rx v 2374-1Wx, 8Tx v 2374-J4x, K2x v 2378-DEx, DFx, DGx, DHx v 2378-2Xx, 5Ux, DTx, DUx, DVx, DWx v 2378-R1x, R3x, R4x, R5x, R7x v 2379-DJx v 2379-DZx v 2379-R1x, R5x * 512-MB DDR SDRAM SO-DIMM 31P9833 (PC2700) for T41/T41p, T42/T42p OP v 2373-3Hx, 3Px, 4Fx, 4Gx, 4Hx, 4Qx, 4Sx, 7Fx, 7Jx, 7Px, 8HU, 8Jx, 8Px, 8Sx, 9Ex, 9Fx, 9Gx, 9Jx, 9Kx, BFx, BHx, BJx, GEx, GGx, GHx, GKx, GMx v 2373-1Zx, 3Ux, 3Vx, 3Wx, 3Xx, 3Yx, 4Tx, 4Ux, 4Vx, 4Wx, 4Yx, 4Zx, 5Tx, 6Ux, 6Vx, 6Yx, 6Zx, 7Wx, 7Xx, 8Xx, 8Yx, 8Zx, 9Tx, 9Ux, 9Xx, 9Zx, CUx, CWx, CXx, CYx, FWx, FYx, GRx, GSx, GTx, GVx, GXx, GYx, GZx, HXx, JTx, JXx, KTx, KUx v 2373-F1x, F2x, F3x, F5x, J7x, J8x, K1x, K3x, K5x, K9x, KCx, KDx, KEx, KGx, KHx, KJx, KKx, KNx, KPx, KQx, Lxx, Mxx, Nxx, P4x, Q6x v 2374-4Hx, 7Fx, 7Jx, GGx v 2374-3Vx, 4Wx, 6Vx, 6Yx, 7Xx v 2374-K1x, K5x, L1x v 2378-5Ux, DXx, DYx, FUx, FZx v 2378-R2x, R6x, R8x, R9x v 2379-DKx v 2379-5Vx, DXx, DYx v 2379-R6x, R8x, R9x * 128-MB DDR SDRAM SO-DIMM (PC2700) for T41/T41p, T42/T42p OP v Supported by CTO (continued) 200 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU P/N CRU ID 9 1-GB DDR SDRAM SO-DIMM (PC2700) 31P9835 for T41/T41p, T42/T42p OP v 2373-GLx, GJx, 9Hx v 2373-9Vx, GUx, HTx, HVx, HWx, HYx, KXx, KYx, KZx v 2373-F4x, P1x, P2x, P3x, Q1x, Q2x, Q3x, Q4x, Q5x v 2374-HTx v 2374-Q2x * 10 Battery pack, Li-ion (6 cell) 4.4 Ah OP v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Ax, 2Bx, 2Cx, 32x, 3Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 58x, 61x, 66x, 6Bx, 6Dx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, 93x, 9Cx, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 3Fx, 3Hx, 3Px, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 5Qx, 5Rx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8Hx, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, 9Ex, 9Fx, 9Gx, 9Hx, 9Jx, 9Kx, BFx, BHx, BJx, GHx, GKx v 2374-12x, 14x, 2Ax, 2Cx, 44x, 4Cx, 72x, 7Cx, 82x, 8Cx, 9Cx v 2374-1Hx, 1Fx, 3Hx, 4Hx, 7Fx, 7Jx, 8Rx v 2374-1Wx, 3Vx, 3Xx, 4Wx, 6Vx, 6Yx, 7Xx, 8Tx v 2375-72x, 2376-72x v 2378-D1U, D2U v 2378-DEx, DFx, DGx, DHx v 2378-2Xx, 5Ux, DTx, DUx, DVx, DWx, DXx, DYx, FUx, FZx v 2379-D3U, D4U, D5U, D6U v 2379-DJx, DKx v 2379-5Vx, DXx, DYx, DZx Sanyo 08K8193 * Sony 92P1011 * Battery pack, Li-ion (9 cell) 6.6 Ah OP v 2373-33x, 91x, 92x, 94x, 96x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-GEx, GGx, GLx, GJx, GMx v 2373-GRx, GSx, GTx, GUx, GVx, GZx, HTx, HVx, HWx, HXx, HYx, KTx, KUx, KXx, KYx, KZx v 2374-GGx v 2374-HTx Sanyo 08K8198 * Sony 92P1013 * (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 201 Parts list No. FRU P/N CRU ID 10 Battery pack, Li-ion (6 cell) 4.4 Ah, Panasonic OP v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Xx, 2Yx, 2Zx, 3Ux, 3Vx, 3Wx, 3Xx, 3Yx, 3Zx, 4Tx, 4Ux, 4Vx, 4Wx, 4Yx, 4Zx, 5Tx, 5Wx, 5Xx, 6Ux, 6Vx, 6Wx, 6Yx, 6Zx, 7Tx, 7Vx, 7Wx, 7Xx, 7Yx, 7Zx, 8Tx, 8Ux, 8Vx, 8Xx, 8Yx, 8Zx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, CUx, CVx, CWx, CXx, CYx, GXx, GYx v 2373-Fxx, Jxx, K1x, K2x, K3x, K5x, K6x, K7x, K8x, K9x, KAx, KBx, KCx, KDx, KEx, KFx, KGx, KHx, KJx, KKx, KLx, KMx, KNx, KPx, KQx, Lxx, Mxx, Nxx v 2374-Jxx, Kxx, Lxx, v 2378-R1x, R2x, R3x, R4x, R6x, R7x, R8x v 2379-R1x, R6x, R8x 92P1060 * Battery pack, Li-ion (9 cell) 6.6 Ah, Panasonic OP v 2373-Pxx, Qxx v 2374-Qxx v 2378-R5x, R9x v 2379-R5x, R9x 92P1061 * Dummy battery pack v Supported by CTO 91P9719 * For optional battery packs, see “Optional FRUs” on page 247. (continued) 202 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU 11 P/N CRU ID Base cover assembly 2373 (14.1-in.) WW (T40/T40p, T41, T42/T42p) 13N5542 v 2373-12x except 12K, 14x except 14K, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x except 29K, 2Ax, 2Bx except 2BK, 2Cx, 32x, 33x, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 58x, 61x, 66x, 6Bx except 6BK, 6Dx, 71x, 72x except 72K, 75x except 75K, 76x, 78x, 7Ax, 7Bx, 7Cx except 7CK, 81x, 82x except 82K, 85x, 86x, 88x, 8Ax, 8Cx except 8CK, 8Dx, 91x, 92x, 93x, 94x except 94K, 96x, 9Ax, 9Bx, 9Cx, A1x, A2x, A3x, A4x, A5x, A6x, A7x, A8x, A9x, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx, G1x except G1K, G2x v 2373-1Ex, 1Fx except 1FK, 1Hx except 1HK, 1Lx, 2Ex, 2Fx, 2Qx except 2QK, 3Fx, 3Hx except 3HK, 3Px, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 5Qx, 5Rx, 6Kx, 6Sx, 7Ex, 7Fx except 7FK, 7Jx except 7JK, 7Kx, 7Mx, 7Px, 8Hx, 8Jx, 8Kx, 8Px, 8Rx except 8RK, 8Sx, 9Ex, 9Fx, 9Gx, 9Hx, 9Jx, 9Kx, AEx, AFx, AHx, AJx, AKx, ALx, AMx, ANx, BFx, BHx, BJx v 2373-1Ux except 1UK, 1Wx except 1WK, 1Yx except 1YK, 1Zx except 1ZK, 2Tx, 2Ux, 2Wx except 2WK, 2Xx, 2Yx, 3Wx except 3WK, 3Zx, 4Tx, 4Ux, 4Vx except 4VK, 4Wx, 5Tx, 5Wx except 5WK, 5Xx except 5XK, 7Wx except 7WK, 8Tx except 8TK, 8Ux except 8UK, 8Vx, ATx, AVx, AWx, BTx, BVx, FWx, JTx except JTK v 2373-F1x, H1x, H2x, H3x, H4x, J1x, J2x, J3x except J3K, J4x, J5x except J5K, J6x, J7x, J8x, J9x, JAx, JCx, JDx, JEx, JFx, K1x except K1K, K2x except K2K, K3x, K6x, K7x, K8x, K9x, KAx, KBx, KCx, KDx, KEx, KFx, KGx, KHx, KMx, KNx, KPx, KQx, L1x except L1K, L2x N (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 203 Parts list No. FRU 11 P/N CRU ID Base cover assembly 2373 (14.1-in.) WW M10 (T41p, T42p) 13N5531 v 2373-ANx, GEx except GEK, GGx except GGK, GHx, GKx, GLx, GJx v 2373-3Ux, 3Vx, 8Xx except 8XK, 8Zx except 8ZK, 9Tx, 9Ux, 9Vx except 9VK, 9Xx except 9XK, 9Zx except 9ZK, BXx, BYx, BZx, Gxx except GxK, KTx, KUx except KUK v 2373-H5x, H6x, H7x, K5x except K5K, KJx, Mxx except M1K, P1x, P2x except P2K, P3x, P4x N Korea (T40/T40p) v 2373-12K, 14K, 29K, 2BK, 6BK, 72K, 75K, 7CK, 82K, 8CK, 94K, G1K, G3K, G5K 13N5093 N Korea (T41, T42) 13N5715 v 2373-1FK, 1HK, 1YK, 1ZK, 2QK, 3HK, 7FK, 7JK, 8RK, 9HK v 2373-1UK, 1WK, 2WK, 3WK, 4VK, 4WK, 5WK, 5XK, 7WK, 8TK, 8UK, 9XK, 9ZK, JTK v 2373-J3K, J5K, K1K, K2K, KLK, L1K N Korea M10 (T41p, T42p) v 2373-GEK, GGK, GMK v 2373-8XK, 8ZK, 9VK, 9XK, 9ZK, GTK, GUK, GXK, KUK v 2373-K5K, M1K, P2J 13N5671 N WW (T42/T42p) 13R2923 v 2373-4Yx, 6Yx, 7Yx, AUx v 2373-3Xx, 3Yx except 3YK, 7Xx, 8Yx except 8YK, AYx, AZx, BUx, CUx, CVx, CWx except CWK, CXx except CXK, CYx except CYK, FYx, HTx except HTK, HVx, HWx except HWK, HXx, HYx, JXx except JXK, KXx except KXK, KYx except KYK, KZx v 2373-F2x, F3x, F4x, F5x, H8x, H9x, HAx, HBx, L1x except L1K, L2x, L3x, L4x, L5x except L5K, L6x except L6K, L7x except L7K, L8x, N1x except N1K, N2x except N2K, N3x, N4x, N5x, Q1x except Q1K, Q2x except Q2K, Q3x, Q4x, Q5x except Q5K N Korea (T42/T42p) v 2373-3YK, 8YK, CWK, CXK, CYK, HTK, HWK, JXK, KXK, KYK v 2373-KKK, L1K, L5K, L6K, L7K, N1K, N2K, Q1K, Q2K, Q5K, Q6K N Base cover assembly 2373 (15.0-in.) (continued) 204 T40/T40p, T41/T41p, T42/T42p 13R2929 Parts list No. FRU 11 P/N CRU ID Base cover assembly 2374 (14.1-in.) WW (T40, T41, T42) 13N5543 v 2374-12x except 12K, 14x except 14K, 2Ax, 2Cx, 44x, 4Cx, 72x except 72K, 75x except 75K, 7Cx except 7CK, 82x except 82K, 8Cx except 8CK, 9Cx v 2374-1Fx except 1FK, 1Hx except 1HK, 3Hx except 3HK, 4Hx except 4HK, 7Fx except 7FK, 7Jx except 7JK, 8Rx except 8RK v 2374-1Wx except 1WK, 4Wx except 4WK, 6Vx, 8Tx except 8TK v 2374-J4x except J4K, K1x except K1K, K2x except K2K N WW M10 (T41p , T42) v 2374-GGx except GGK v 2374-3Vx v 2374-K5x except K5K 13N5668 N Korea (T40) v 2374-12K, 14K, 72K, 75K, 7CK, 82K, 8CK 91P8565 N Korea (T41, T42) v 2374-1FK, 1HK, 3HK, 7FK, 7JK, 8RK v 2374-1WK, 4WK, 8TK v 2374-J4K, K1K, K2K 13N5716 N Korea M10 (T41p) v 2374-GGK v 2374-K5K 13N5672 N WW (T42/ T42p) v 2374-6Yx except 6YK v 2374-3Xx, 7Xx, HTx except HTK v 2374-L1x except L1K, Q2x except Q2K 13R2924 N Korea (T42/ T42p) v 2374-6YK v 2374-HTK v 2374-L1K, Q2K 13R2930 N WW (T40) v 2375-72x except 72K 13N5544 N WW M10 (T41p) v Supported by CTO 13N5669 N Korea (T40) v 2375-72K 13N5044 N Base cover assembly 2374 (15.0-in.) Base cover assembly 2375 (14.1-in.) (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 205 Parts list No. FRU 11 P/N CRU ID 13R2925 N WW (T40) v 2376-72x except 72K 13N5545 N WW M10 (T41p) v Supported by CTO 13N5670 N Korea (T40) v 2376-72K 13N5045 N 13R2926 N WW (T40, T41, T42) 13N5546 v 2378-D1x, D2x v 2378-DEx, DFx, DGx, DHx, DLx, DMx, EEx, EFx, EJx, ELx, EMx, ENx, EPx v 2378-5Ux, DTx, DUx, ETx, EUx, EVx, FUx, FTx v 2378-R1x, R3x, R4x, R5x N WW M10 (T42) v 2378-FVU 26R7900 N 13R2927 N 13N5547 N 13R2928 N Base cover assembly 2375 (15.0-in.) WW (T42/T42p) v Supported by CTO Base cover assembly 2376 (14.1-in.) Base cover assembly 2376 (15.0-in.) WW (T42/T42p) v Supported by CTO Base cover assembly 2378 (14.1-in.) Base cover assembly 2378 (15.0-in.) WW (T42/T42p) v 2378-DVx, DWx, EWx, FZx v 2378-2Zx, DYx, DXx, EXx, EYx, EZx v 2378-R2x, R9x Base cover assembly 2379 (14.1-in.) WW (T40, T41, T42 ) v 2379-D3x, D4x, D5x, D6x v 2379-DJx, DKx, ERx, ESx v 2379-5Vx v 2379-R1x, R5x Base cover assembly 2379 (15.0-in.) WW (T42/T42p) v 2379-DZx v 2379-DYx, DXx, EYx, EZx v 2379-R6x, R8x, R9x (continued) 206 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU 12 13 14 P/N CRU ID Cover, DIMM slot for T40/T40p, T41, T42 13N5529 * Cover, DIMM slot for T41p, T42p 13N5667 * Speaker (14.1-in.) 91P8396 N Speaker (15.0-in.) 91P8335 N ThinkPad Dual-Band 11a/b Wi-Fi Wireless Mini PCI Adapter v 2373-2Ax, 33x, 44x, 92x, 93x, 9Cx, G1x, G3x, G4x except xxE, xxJ v 2374-2Ax, 44x, 9Cx except xxE, xxJ v 2379-D5x 91P7265 N v 2373-2AJ, 33J, 44J, 92J, 93J, 9CJ, G1E,2AE, 33E, 44E, 92E, 93E, 9CE, G1E 26P8447 N v 2373-75x, 78x, 85x, 88x, 96x, B5x, C7x except xxC, xxE, xxG, xxJ, xxK v 2373-7Jx except 7JG, 7JA, 7JK, 7JE, 7JJ, 7JC, 9KU, 7MM, 7MB, 7MH, 8JV v 2374-75x except xxC, xxE, xxG, xxJ, xxK v 2374-7Jx except xxG, xxA, xxK, xxE, xxJ, xxC 91P7406 ** (*1) v 2373-75G, 78G, 79G, 85G, 88G, 96G, B5G, C7G, 75K, 78K, 85K, 88K, 96K, B5K, C7K v 2373-7JG, 7JA, 7JK, 7MA v 2374-75G, 75K v 2374-7JG, 7JA, 7JK 91P7408 ** (*1) v 2373-75J, 78J, 79J, 85J, 88J, 96J, B5J, C7J, 75E, 78E, 85E, 88E, 96E, B5E, C7E v 2373-7JE, 7JJ, BJJ v 2374-75J v 2374-7JE, 7JJ 93P3601 ** (*1) v 2373-75C, 78C, 85C, 88C, 96C, B5C, C7C v 2373-7JC, 7MC v 2374-7JC 91P7412 ** (*1) Cisco Aironet Wireless 802.11b *1: These Mini PCI Adapters are only CRUs in the 14.1-in. LCD models. They are not CRUs in the 15.0-in. LCD models. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 207 Parts list No. FRU P/N CRU ID 14 91P7267 ** (*1) Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter v 2373-19x, 1Bx, 22x, 25x, 29x, 2Bx, 2Cx, 32x, 3Cx, 42x, 47x, 4Ax, 4Cx, 6Bx, 6Dx, 72x, 76x, 82x, 86x, 94x, B2x, C3x, G5x, G6x v 2373-1Fx, 1Hx, 2Fx, 2Qx, 3Fx, 3Hx, 3Px, 4Fx, 4Px, 5Qx, 5Rx, 6Sx, 7Fx, 7Kx, 8HU, 8Kx, 9Jx, 9Hx, BFx, BHx , GGx, GLx, GKx, GMx v 2373-1Ux, 1Wx, 2Wx, 2Xx, 2Yx, 2Zx, 3Yx, 3Zx, 4Vx, 4Wx, 4Zx, 5Xx, 6Yx, 7Vx, 7Yx, 7Zx, 8Vx, 8Xx, 9Ux, CUx, GTx, GYx, HTx v 2373-J2x, J9x, K7x, K8x, L5x v 2374-2Cx, 4Cx, 72x, 82x v 2374-1Hx, 3Hx, 1Fx, 7Fx, GGx v 2374-1Wx, 4Wx, 6Yx, HTx v 2375-72x v 2376-72x v 2378-D2U v 2378-DHx v 2378-2Xx v 2379-D3U, D4U, D6U v 2379-DJx ThinkPad 11a/b/g Wireless LAN Mini PCI Adapter v 2373-4Gx, 4HU, 9Fx, 9RU, GEx, GHx except xxE, xxJ, xxP, xxS, xxY, xxC, xxK v 2373-3Ux; 4Yx; 6Zx; 9Xx except 9XE, 9XJ; 9Zx except 9ZE, 9ZJ; CVx; CWx except CWE, CWJ; CYx except CYE, CYJ; GSx; GUx except GUE, GUJ; GVx; GXx; GZx; HVx; HWx except HWE, HWJ; HXx; JTx except JTE, JTJ; JXx except JXE, JXJ; KTx except KTE, KTJ; KXx except KXE, KXJ v 2373-KFx v 2374-4Hx v 2378-DYx v 2379-DYx 91P7301 ** (*1) v 2373-9FE, 9FJ, 9GJ, GEE, GEJ, GJE, GJJ v 2373-9XE, 9XJ, 9ZE, 9ZJ, CWE, CWJ, CYE, CYJ, GUE, GUJ, HWE, HWJ, JTE, JTJ, JXE, JXJ, KTE, KTJ, KXE, KXJ 93P3599 ** (*1) *1: These Mini PCI Adapters are only CRUs in the 14.1-in. LCD models. They are not CRUs in the 15.0-in. LCD models. (continued) 208 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU 14 P/N CRU ID Intel PRO Wireless 2200BG Mini-PCI Adapter v 2373-1YU, 3VU, 3XU, 5TU, 6VU, 7XU, 8ZU, 9VU, CXU, GRU, KUU, KYU v 2373-J3U, J4U, K1U, K3U, K5U, L1U, L4U, M3U, N3U, P2U, Q2U v 2374-3VU, 3XU, 6VU, 7XU v 2374-J4U, K1U, K3U, K5U, Q2U v 2378-5UU, DTU, DUU, DVU, DWU, DXU, FUU, FZU v 2378-R1U, R2U, R3U, R4U, R5U, R6U, R7U, R8U, R9U v 2379-5VU, DXU, DZU v 2379-R1U, R5U, R6U, R8U, R9U 93P3483 ** (*1) v 2373-1Yx except 1YU, 1Zx, 3Wx, 4Ux, 93P3485 5Wx, 6Wx, 7Wx, 8Yx, 9Vx except 9VU, CXx except CXU, KUx except KUU, KYx except KYU v 2373-J1x, J3x except J3U, J4x except J4U, J6x, J7x, J8x, JCx, JDx, JEx, JFx, K1x except K1U, K3x except K3U, K5x except K5U, KBx, KCx, KDx, KHx, KJx, KKx, KLx, KPx, KQx, L1x except L1U, L2x, L3x, L4x except L4U, L8x, M3x except M3U, N3x except N3U, P2x except P2U, P4x, Q2x except Q2U, Q6x v 2374-J4x except J4U, K1x except K1U, K5x except K5U, L1x except L1U, Q2x except Q2U v 2378-FTx, FVx, FZx except FZU ** (*1) ThinkPad 11b/g Wireless LAN Mini PCI Adapter v 2373-JTU, JTV, JXU, JXV v 2373-KGU, KGV, L6U, L6V, 93P3475 ** (*1) v 2373-JTx except JTU, JTV; JXx except JXU, JXV v 2373-KGx except KGU, KGV; L6x except L6U, L6V 93P3477 ** (*1) *1: These Mini PCI Adapters are only CRUs in the 14.1-in. LCD models. They are not CRUs in the 15.0-in. LCD models. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 209 Parts list No. FRU 14 P/N CRU ID ThinkPad 11a/b/g Wireless LAN Mini PCI Adapter II v 2373-K9U, M1U, N1U, P1U, Q1U 93P4262 ** (*1) v 2373-JAG; JBG; K9G; M1x except 93P4264 M1E, M1J, M1U; M6x; N1x except N1U, N1E, N1J; P1x except P1U, P1E, P1J; Q1x escept Q1U, Q1E, Q1J ** (*1) v 2373-M1E, M1J, M4E, M4J, N1E, N1J, N4E, N4J, P1E, P1J, Q1E, Q1J ** (*1) 93P4266 Intel PRO Wireless 2915ABG Mini-PCI Adapter v 2373-KMU, L7U, N2U, P3U, Q4U 93P4235 ** (*1) v 2373-KNx; L7x except L7U; N2x except N2J, N2U; N5x except N5J; P3x except P3J, P3U; P4x; Q4x except Q4J, Q4U; Q5x 93P4237 ** (*1) v 2373-N2J, N5J, P3J, Q4J 93P4239 ** (*1) *1: These Mini PCI Adapters are only CRUs in the 14.1-in. LCD models. They are not CRUs in the 15.0-in. LCD models. 15 System board assembly, ATI M6-16, 10/100 Ethernet for T40 v 2373-51x, 54x, 61x, 66x, A6x 91P7701 N System board assembly, ATI M6-16, 10/100 Ethernet with security chip for T40 v 2373-6Bx, 6Dx, A7x 91P7704 N System board assembly, ATI M7-32, 10/100 Ethernet for T40 v 2373-16x, 24x, 71x, 7Ax, 81x, 8Ax, A5x, C1x v 2378-D1U 91P7707 N System board assembly, ATI M7-32, 10/100 Ethernet with security chip for T40 v 2373-12x, 14x, 19x, 1Bx, 22x, 25x, 29x, 2Ax, 2Bx, 2Cx, 44x, 4Bx, 4Cx, 76x, 78x, 7Cx, 86x, 88x, 8Cx, A3x, C4x, C8x v 2374-12x, 14x, 2Ax, 2Cx, 44x, 4Cx, 7Cx, 8Cx v 2378-D2U v 2379-D3U, D4U 91P7710 N System board assembly, ATI M7-32, Gigabit Ethernet for T40 v Supported by CTO 91P7713 N (continued) 210 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU P/N CRU ID 15 System board assembly, ATI M7-32, Gigabit Ethernet with security chip for T40 v 2373-32x, 42x, 47x, 49x, 4Ax, 72x, 75x, 82x, 85x, 8Dx, A2x, A4x, B2x, B5x, BDx, C3x, C7x, CAx v 2374-72x, 75x, 82x v 2375-72x v 2376-72x 91P7716 N System board assembly, ATI M9-32, Gigabit Ethernet with security chip for T40 v 2373-33x, 58x, 91x, 92x, 93x, 94x, 96x, 9Cx, A1x, A8x v 2374-9Cx v 2379-D5x, D6x 91P7719 N System board assembly, ATI M9 GL-64, Gigabit Ethernet with security chip for T40p v 2373-G1x, G2x, G3x, G4x, G5x, G6x, A9x 93P3304 N System board assembly, ATI M7-32, Gigabit Ethernet with security chip for T41 v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 3Fx, 3Px, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 5Qx, 5Rx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8HU, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, AFx, AHx, AJx, AKx, ALx, BFx, BHx, BJx v 2374-1Fx, 1Hx, 4Hx, 7Fx, 7Jx, 8Rx v 2378-DFx, DGx, DHx, EFx, EJx, EKx, ELx, EMx v 2379-DKx, ERx 93P3307 N System board assembly, ATI M9-32, Gigabit Ethernet with security chip for T41 v 2373-3Hx, 9Ex, 9Fx, 9Gx, 9Hx, 9Jx, 9Kx, AMx, AEx v 2374-3Hx v 2378-DEx, EEx, ENx, EPx v 2379-DJx, ESx 93P3310 N System board assembly, ATI M10 93P3313 GL-128, Gigabit Ethernet with security chip for T41p v 2373-ANx, GEx, GGx, GHx, GLx, GJx, GKx, GMx v 2374-GGx N (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 211 Parts list No. FRU P/N CRU ID 15 System board assembly, ATI M7-32, Gigabit Ethernet with security chip for T42 v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Xx, 2Yx, 3Wx, 3Zx, 4Tx, 4Ux, 4Vx, 4Wx, 4Yx, 4Zx, 5Wx, 5Xx, 6Ux, 6Vx, 6Wx, 6Yx, 6Zx, 7Tx, 7Vx, 7Wx, 7Yx, 7Zx, 8Tx, 8Ux, 8Vx, ATx, AUx, AVx, AWx, BTx, BVx, FWx, FYx, JTx v 2374-1Wx, 4Wx, 6VU, 6Yx, 8Tx v 2378-2Xx, DTx, DUx, ETx, EUx, EVx, FUx v 2378-2Zx, DVx, DWx, EWx, FTx, FZx v 2379-DZx 93P4156 N System board assembly, ATI M9-64, Gigabit Ethernet with security chip for T42 v 2373-5TU v 2378-5UU v 2379-5VU 93P4157 N System board assembly, ATI M10-64, 93P4158 Gigabit Ethernet with security chip for T42 v 2373-3Ux, 3Vx, 3Xx, 3Yx, 8Xx, 8Yx, 8Zx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, AYx, BUx, BXx, BYx, CUx, CVx, CWx, CXx, CYx, JXx v 2374-3VU, 3Xx v 2378-DXx, EXx, EYx, FVx v 2379-DXx N System board assembly, ATI M10 93P4159 GL-128, Gigabit Ethernet with security chip for T42 v 2373-7Xx, AZx, BZx, GRx, GSx, GTx, GUx, GVx, GXx, GYx, GZx, HTx, HVx, HWx, HXx, HYx, KTx. KUx, KXx, KYx, KZx v 2374-7Xx, HTx v 2378-DYx, EZx v 2379-DYx, EZx N System board assembly, ATI M7-32, Gigabit Ethernet with security chip (no fingerprint sensor) for T42 v 2373-J1x, J2x, J3x, J5x, JCx, JDx, JEx, JFx, v 2378-R3x, R4x, R6x, R7x v 2379-R6x N (continued) 212 T40/T40p, T41/T41p, T42/T42p 27K9907 Parts list No. FRU P/N CRU ID 15 System board assembly, ATI M10-64, Gigabit Ethernet with security chip (no fingerprint sensor) for T42 v Supported by CTO 27K9908 N System board assembly, ATI M10 GL-128, Gigabit Ethernet with security chip (no fingerprint sensor) for T42 v Supported by CTO 27K9909 N System board assembly, ATI M7-32, Gigabit Ethernet with security chip/fingerprint sensor for T42 v 2373-F1x, F2x, F5x, H1x, H2x, H3x, H4x, H8x, J4x, J6x, J7x, J8x, J9x, JAx, JBx, JCx, JDx, JEx, JFx, K1x, K2x, K3x, K6x, K7x, K8x, K9x, KAx, KBx, KCx, KDx, KEx, KFx, KGx, KHx, KLx, KMx, KNx, L1x, L2x v 2374-J4x, K1x, K2x, L1x v 2378-R1x, R5x, R8x, RPx, RQx, RRx, RSx v 2379-R1x, R5x, R8x 27K9910 N System board assembly, ATI M10-64, Gigabit Ethernet with security chip/fingerprint sensor for T42 v 2373-F3x, H5x, H6x, H9x, HAx, KJx, KKx, L3x, L4x, L5x, L6x, L7x, M1x, M2x, M3x, M4x, M5x, M6x, N1x, N2x, N3x, N4x, N5x v 2374-K5x v 2378-R2x, R9x, RTx, RUx v 2379-R9x, RUx 27K9911 N System board assembly, ATI M10 GL-128, Gigabit Ethernet with security chip/fingerprint sensor for T42 v 2373-F4x, P1x, P2x, P3x, P4x, Q1x, Q2x, Q3x, Q4x, Q5x, Q6x v 2374-Q2x v 2378-RVx v 2379-RVx 27K9912 N 16 PC Card slot 91P8391 N 17 CPU assembly, Intel Pentium M processor, 1.3 GHz for T40 v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Ax, 2Bx, 51x, 54x, 58x, 61x, 66x, 6Bx, 6Dx, A6x, A7x, C1x v 2374-12x, 14x, 2Ax v 2378-D1U, D2U 26P8532 N (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 213 Parts list No. FRU P/N CRU ID 17 CPU assembly, Intel Pentium M processor, 1.4 GHz for T40/T40p, T41/T41p v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 5Hx, 5Qx, 5Rx, 6Kx, 6Sx, ALx, AJx v 2374-1Hx, 1Fx v 2378-DEx, DFx, DGx, DHx, EEx, EFx v 2379-D3x, D6x 26P8482 N CPU assembly, Intel Pentium M processor, 1.5 GHz for T40/T40p, T41/T41p, T42 v 2373-32x, 33x, 3Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, A2x, A3x, A4x, A5x, B2x, B5x, BDx, C3x, C4x, C7x, C8x, CAx v 2373-8HU v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Xx, 2Yx, 5Wx, 5Xx, ATx, BTx v 2374-44x, 72x, 75x, 7Cx, 82x, 8Cx v 2374-1Wx v 2375-72x v 2376-72x v 2378-2Xx, 2Zx, DTx, DUx, ETx, FUx 26P8533 N CPU assembly, Intel Pentium M processor, 1.6 GHz for T40/T40p, T41/T41p v 2373-91x, 92x, 93x, 94x, 96x, 9Cx, A1x, A8x, A9x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-3Fx, 3Hx, 3Px, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, AFx, AHx, AKx, BFx, BHx, BJx v 2374-9Cx v 2374-3Hx, 4Hx, 7Fx, 7Jx, 8Rx v 2378-EJx, EKx, ELx, EMx v 2379-D4x, D5x v 2379-DJx, DKx, ERx, ESx 26P8483 N CPU assembly, Intel Pentium M 91P7387 processor, 1.7 GHz for T41/T41p v 2373-9Ex, 9Fx, 9Gx, 9Hx, 9Jx, 9Kx, AMx, AEx, ANx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2374-GGx v 2378-ENx, EPx N CPU assembly, Intel Pentium M processor 715 (1.5 GHz) for T42 v Supported by CTO N (continued) 214 T40/T40p, T41/T41p, T42/T42p 93P4261 Parts list No. FRU 17 P/N CRU ID CPU assembly, Intel Pentium M 91P7435 processor 735 (1.7 GHz) for T42 v 2373-3Ux, 3Vx, 3Wx, 3Xx, 3Yx, 3Zx, 4Tx, 4Ux, 4Vx, 4Wx, 4Yx, 4Zx, 6Ux, 6Vx, 6Wx, 6Yx, 6Zx, 7Tx, 7Vx, 7Wx, 7Yx, 7Zx, 8Tx, 8Ux, 8Vx, 8Xx, 8Yx, 8Zx, AUx, AVx, AWx, AYx, BVx, JTx, JXx v 2373-F1x, F2x, F5x, H2x, H3x, H4x, H8x, H9x, K1x, K2x, K3x, K5x, K6x, K7x, K8x, K9x, KAx, KBx, KCx, KDx, KEx, KFx, KGx, KKx, KLx, KMx, KNx, L1x, L3x, L4x, L5x, L6x, L7x v 2374-3Vx, 3Xx, 4Wx, 6Vx, 6Yx, 8Tx v 2374-K1x, K2x, K5x, L1x v 2378-DVx, DWx, DXx, DYx, EUx, EVx, FTx, FVx, FZx v 2378-R2x, RQx, RRx, RSx, RTx v 2379-DXx, DYx, DZx, EUx, EVx, EWx, EXx N CPU assembly, Intel Pentium M 91P7357 processor 745 (1.8 GHz) for T42/T42p v 2373-7Xx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, AZx, BUx, BXx, BYx, BZx, CUx, CVx, CWx, CXx, CYx, GRx, GSx, GTx, GUx, GVx, GXx, GYx, GZx, HTx, HVx, HWx, HXx, HYx v 2373-F3x, F4x, KHx, KJx, L2x, M1x, M2x, M3x, M4x, M5x, N1x, N2x, N3x, N4x, N5x, Q6x v 2374-7Xx, HTx v 2378-EYx, EZx v 2378-R8x, R9x v 2379-EYx, EZx v 2379-R8x, R9x N CPU assembly, Intel Pentium M processor 755 (2.0 GHz) for T42/T42p v 2373-KTx, KUx, KXx, KYx, KZx v 2373-M6x N 93P4225 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 215 Parts list No. FRU P/N CRU ID 17 CPU assembly, Intel Pentium M processor 765 (2.1 GHz) for T42/T42p v 2373-Pxx, Q1x, Q2x, Q3x, Q4x, Q5x v 2374-Q2x 27K9924 N 18 Fan assembly (short) (14.1-in.) v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Ax, 2Bx, 2Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 61x, 66x, 6Bx, 6Dx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, A2x, A3x, A4x, A5x, A6x, A7x, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8HU, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, AFx, AHx, ALx, BFx, BJx v 2374-12x, 14x, 72x, 75x, 7Cx, 82x, 8Cx v 2374-1Hx, 1Fx, 4Hx, 7Fx, 7Jx, 8Rx v 2375-72x v 2376-72x v 2378-D1U, D2U v 2378-DFx, DGx, DHx, EFx, EJx, ELx, EMx v 2379-D3U, D4U v 2379-DKx, ERx 91P8393 N Fan assembly (short) (14.1-in.) 26R7860 v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Xx, 2Yx, 3Wx, 3Zx, 4Tx, 4Ux, 4Vx, 4Wx, 4Zx, 5Tx, 5Wx, 5Xx, 6Ux, 6Vx, 6Wx, 6Zx, 7Tx, 7Vx, 7Wx, 7Zx, 8Tx, 8Ux, 8Vx, ATx, AVx, AWx, BTx, BVx, FWx, JTx v 2373-F1x, H1x, H2x, H3x, H4x, H5x, H6x, H7x, J1x, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x, JAx, JCx, JDx, JEx, JFx, Kxx except KKx, Mxx, Pxx v 2374-1Wx, 4Wx, 6VU, 8Tx v 2374-J4x, K1x, K2x, K5x v 2378-2Xx, 5Ux, DTx, DUx, ETx, EUx, EVx, FTx, FUx v 2378-R1x, R3x, R4x, R5x, RPx, RQx, RRx v 2379-5Vx v 2379-R1x, R5x N (continued) 216 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU P/N CRU ID 18 Fan assembly (short) (15.0-in.) v 2373-4Yx, 6Yx, 7Yx, AUx, FYx v 2373-F2x, F3x, F5x, H8x, H9x, HAx, JBx, KKx, L1x, L2x, L3x, L4x, L5x, L6x, L7x, Nxx, v 2374-6Yx v 2374-L1x, v 2378-2Zx, DVx, DWx, EWx, FZx v 2378-R2x, R6x, R7x, R8x, R9x, RSx, RTx, RUx v 2379-DZx v 2379-R6x, R8x, R9x 13R2919 N Fan assembly (long) v 2373-32x, 33x, 3Cx, 58x, 91x, 92x, 93x, 94x, 96x, 9Cx, A1x, A8x, A9x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-3Fx, 3Hx, 3Px, 5Qx, 5Rx, 9Ex, 9Fx, 9Gx, 9Hx, 9Jx, 9Kx, AJx, AKx, AMx, AEx, BHx v 2374-9Cx v 2374-3Hx v 2378-DEx, EEx, EKx, ENx, EPx, ESx v 2379-D5U, D6U v 2379-DJx 13N5442 N Fan assembly (long) M10 13R2657 v 2373-ANx, GEx, GGx, GHx, GLx, GJx, GKx, GMx v 2373-3Ux, 3Vx, 3Xx, 3Yx, 7Xx, 8Xx, 8Yx, 8Zx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, AYx, AZx, BUx, BXx, BYx, BZx, CUx, CVx, CWx, CXx, CYx, GRx, GSx, GTx, GUx, GVx, GXx, GYx, GZx, HTx, HVx, HWx, HXx, HYx, JXx, KTx, KUx, KXx, KYx, KZx v 2373-F4x, H7x, HBx, Q1x, Q2x, Q3x, Q4x, Q5x, Q6x v 2374-3VU, 7Xx, HTx v 2374-3Xx, 7Xx, HTx v 2374-Q2x v 2378-DXx, DYx, EXx, EYx, EZx, FVx v 2378-RVx v 2379-DXx, DYx, EZx v 2379-RVx N Backup battery (for 14.1-in.) 92P0986 ** Backup battery (for 15.0-in.) 02K6572 N 19 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 217 Parts list No. FRU 20 P/N CRU ID Palm rest assembly with touch pad (WW) 91P8398 v 2373-all except xxK in T40/T40p v 2373-all in T41/T41p, T42/T42p v 2374-all except xxK in T40/T40p v 2374-all in T41/T41p, T42/T42p v 2375-all v 2376-all except xxK v 2378-all v 2379-all ** (*2) Palm rest assembly without touch pad (WW) v Supported by CTO 91P8399 ** Palm rest assembly with touch pad (Korea) for T40/T40p, T42/T42p v 2373-xxK v 2374-xxK v 2375-xxK v 2376-xxK 91P8400 ** Palm rest assembly with touch pad, fingerprint sensor v 2373-F1x, H1x, H2x, H3x, H4x, H5x, H6x, H7x, J4x, J6x, J7x, J8x, J9x, JAx, K1x, K2x, K3x, K5x, K6x, K7x, K8x, K9x, KAx, KBx, KCx, KDx, KEx, KFx, KGx, KHx, KJx, KLx, KMx, KNx, Mxx, P1x, P2x, P3x, P4x v 2374-J4x, K1x, K2x, K5x v 2378-R1x, R5x, RPx, RQx v 2379-R1x, R5x 91P8684 ** *2: Palm rest in the models xxU, xxF with ThinkPad Dual-Band 11a/b Wi-Fi Wireless Mini PCI Adapter is not a Tier2 CRU, since it is secured with tamper proof screws. 21 Keyboard (see “Keyboard” on page 235.) 22 Track point stick caps (continued) 218 T40/T40p, T41/T41p, T42/T42p ** 91P9642 * Parts list No. FRU P/N CRU ID 23 Interposer card for T42/T42p v 2373-3Xx, 3Yx, 4Yx, 6Yx, 7Xx, 7Yx, 8Yx, AUx, AYx, AZx, BUx, CUx, CVx, CWx, CXx, CYx, FYx, HTx, HVx, HWx, HXx, HYx, JXx, KXx, KYx, KZx v 2373-F2x, F3x, F4x, F5x, H8x, H9x, HAx, HBx, JBx, KKx, Lxx, Nxx, Qxx v 2374-3Xx, 6Yx, 7Xx, HTx v 2374-L1x, Q2x v 2378-2Zx, DVx, DWx, DXx, DYx, EWx, EXx, EYx, EZx, FZx v 2378-R2x, R6x, R7x, R8x, R9x, RSx, RTx, RUx, RVx v 2379-DWx, DXx, DYx, EYx, EZx v 2379-R6x, R8x, R9x, RUx, RVx 91P7427 N — Screw for drive bay for T40/T40p 13N5107 * — Telephone cable (SAN TAI) 91P6839 * — Thermal grease 46L4855 N ThinkPad T40/T40p, T41/T41p, T42/T42p Series 219 Parts list 14.1-in. LCD FRUs 10 1 a b 9 8 7 6 2 3 e 5 4 d c 220 T40/T40p, T41/T41p, T42/T42p Parts list 14.1-in. XGA TFT No. FRU a-d 1 P/N CRU ID See “Miscellaneous parts” on page 243. LCD cover kit (WW) 13R2569 v 2373-12x except 12K, 14x except 14K, 16x, 19x, 1Bx, 22x, 24x, 25x, 2Ax, 2Bx except 2BK, 2Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 61x, 66x, 6Bx except 6BK, 6Dx, 71x, 72x except 72K, 75x except 75K, 76x, 78x, 7Ax, 7Bx, 7Cx except 7CK, 81x, 82x except 82K, 85x, 86x, 88x, 8Ax, 8Cx except 8CK, 8Dx, A2x, A3x, A4x, A5x, A6x, A7x, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 5Qx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8Hx, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, AFx, AHx, ALx, BFx, BJx v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Yx, 4Tx, 4Vx, 4Wx, 4Zx, 5Tx, 5Wx, 6Ux, 6Vx, 6Wx, 6Zx, 7Tx, 7Vx, 7Wx, 7Zx, 8Tx, 8Ux, 8Vx, ATx, AVx, AWx, FTx, FWx, JTx v 2373-F1x, H1x, H2x, H3x, J1x, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x, JAx, JCx, JDx, JEx, JFx, K1x, K2x, K3x, K6x, K7x, K8x, K9x, KAx, KBx, KEx, KGx, KHx, KLx, KMx, KNx, KPx v 2374-12x except 12K, 14x except 14K, 2Ax, 2Cx, 44x, 4Cx, 72x except 72K, 75x except 75K, 7Cx except 7CK, 82x except 82K, 8Cx except 8CK v 2374-1Fx, 1Hx, 4Hx, 7Fx, 7Jx, 8Rx v 2374-1Wx, 4Wx, 6Vx, 8Tx v 2374-J4x, K1x, K2x v 2375-72x except 72K v 2376-72x except 72K v 2378-D1x, D2x v 2378-DFx, DGx, DHx, DLx, DMx, EFx, EJx, ELx, EMx v 2378-5Ux, DTx, DUx, ETx, EUx, FUx v 2378-R1x, R3x, R4x, RPx, RQx v 2379-D3x, D4x v 2379-5Vx, DKx, ERx v 2379-R1x N (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 221 Parts list No. FRU P/N CRU ID 1 LCD cover kit (Korea) for T40/T40p v 2373-12K, 14K, 29K, 2BK, 6BK, 72K, 75K, 7CK, 82K, 8CK v 2374-12K, 14K, 72K, 7CK, 75K, 82K, 8CK v 2375-72K v 2376-72K 13R2570 N 2 Hinges 91P8388 N 3 LCD cable assembly, 14.1-in. XGA v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Ax, 2Bx, 2Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 61x, 66x, 6Bx, 6Dx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, A2x, A3x, A5x, A6x, A7x, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8HU, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, AFx, AHx, ALx, BFx, BJx v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Yx, 4Tx, 4Vx, 4Wx, 4Zx, 5Tx, 5Wx, 6Ux, 6Vx, 6Wx, 6Zx, 7Tx, 7Vx, 7Wx, 7Zx, 8Tx, 8Ux, 8Vx, ATx, AVx, AWx, FWx, JTx v 2373-F1x, H1x, H2x, H3x, J1x, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x, JAx, JCx, JDx, JEx, JFx, K1x, K2x, K3x, K6x, K7x, K8x, K9x, KAx, KBx, KEx, KGx, KHx, KLx, KMx, KNx, KPx v 2374-12x, 14x, 2Ax,2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2374-1Hx, 1Fx, 4Hx, 7Fx, 7Jx, 8Rx v 2374-1Wx, 4Wx, 6Vx, 8Tx v 2374-J4x, K1x, K2x v 2375-72x v 2376-72x v 2378-D1U, D2U v 2378-DFx, DGx, DHx, EFx, EJx, ELx, EMx v 2378-5Ux, DTx, DUx, ETx, EUx, FTx, FUx v 2378-R1x, R3x, R4x, RPx, RQx v 2379-D3U, D4U v 2379-5Vx, DKx, ERx v 2379-R1x 91P6786 N (continued) 222 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU P/N CRU ID 4 Wireless AUX antenna 13N5517 N 5 Bluetooth wireless antenna assembly v 2373-42x, 4Ax, A2x v 2373-2Fx, 4Fx, 4Gx, 4Px, AFx v 2373- 4Zx, 6Zx, 7Zx, AWx, FWx v 2373-F1x, H3x, J1x, JAx, JFx, K1x, K2x, K9x, KBx, KMx, KNx, KPx v 2374-K1x, K2x, v 2378-EMx v 2378-DTx, DUx, ETx, EUx, FTx v 2378-R1x, R3x, R4x, RPx, RQx v 2379-R1x 13N5515 N 6 Antenna assembly 13N5517 N 7 Inverter card 26P8464 N 8 LCD panel, 14.1-in. XGA, ID Tech for T40 v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Ax, 2Bx, 2Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 61x, 66x, 6Bx, 6Dx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, A2x, A3x, A5x, A6x, A7x, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2374-12x, 14x, 2Ax,2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2375-72x v 2376-72x v 2378-D1U, D2U v 2379-D3U, D4U 11P8350 N (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 223 Parts list No. FRU 8 CRU ID LCD panel, 14.1-in. XGA for T40, T41, T42 v 2373-12x, 14x, 16x, 19x, 1Bx, 22x, 24x, 25x, 29x, 2Ax, 2Bx, 2Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 61x, 66x, 6Bx, 6Dx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, A2x, A3x, A5x, A6x, A7x, B2x, B5x, BDx, C1x, C3x, C4x, C7x, C8x, CAx v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8HU, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, AFx, AHx, ALx, BFx, BJx v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Yx, 4Tx, 4Vx, 4Wx, 4Zx, 5Tx, 5Wx, 6Ux, 6Vx, 6Wx, 6Zx, 7Tx, 7Vx, 7Wx, 7Zx, 8Tx, 8Ux, 8Vx, ATx, AVx, AWx, FWx, JTx v 2373-F1x, H1x, H2x, H3x, J1x, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x, JAx, JCx, JDx, JEx, JFx, K1x, K2x, K3x, K6x, K7x, K8x, K9x, KAx, KBx, KEx, KGx, KHx, KLx, KMx, KNx, KPx v 2374-12x, 14x, 2Ax, 2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2374-1Hx, 1Fx, 4Hx, 7Fx, 7Jx, 8Rx v 2374-1Wx, 4Wx, 6Vx, 8Tx v 2374-J4x, K1x, K2x v 2375-72x v 2376-72x v 2378-D1U, D2U v 2378-DFx, DGx, DHx, EFx, EJx, ELx, EMx v 2378-5Ux, DTx, DUx, ETx, EUx, FTx, FUx v 2378-R1x, R3x, R4x, RPx, RQx v 2379-D3U, D4U v 2379-5Vx, DKx, ERx v 2379-R1x Samsung 11P8352 N LG 92P6726 N (continued) 224 P/N T40/T40p, T41/T41p, T42/T42p Parts list No. FRU P/N CRU ID 8 LCD panel, 14.1-in. XGA, CMO for T41, T42 v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 6Kx, 6Sx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8HU, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, AFx, AHx, ALx, BFx, BJx v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Yx, 4Tx, 4Vx, 4Wx, 4Zx, 5Tx, 5Wx, 6Ux, 6Vx, 6Wx, 6Zx, 7Tx, 7Vx, 7Wx, 7Zx, 8Tx, 8Ux, 8Vx, ATx, AVx, AWx, FWx, JTx v 2373-F1x, H1x, H2x, H3x, J1x, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x, JAx, JCx, JDx, JEx, JFx, K1x, K2x, K3x, K6x, K7x, K8x, K9x, KAx, KBx, KEx, KGx, KHx, KLx, KMx, KNx, KPx v 2374-12x, 14x, 2Ax,2Cx, 44x, 4Cx, 72x, 75x, 7Cx, 82x, 8Cx v 2374-1Wx, 4Wx, 6Vx, 8Tx v 2374-J4x, K1x, K2x v 2378-DFx, DGx, DHx, EFx, EJx, ELx, EMx v 2378-5Ux, DTx, DUx, ETx, EUx, FTx, FUx v 2378-R1x, R3x, R4x, RPx, RQx v 2379-5Vx, DKx, ERx v 2379-R1x 92P6675 N 9 Tape on Bluetooth wireless antenna v 2373-42x, 4Ax, A2x v 2373-2Fx, 4Fx, 4Gx, 4Px, AFx v 2373- 4Zx, 6Zx, 7Zx, AWx, FWx v 2373-F1x, H3x, J1x, JAx, JFx, K1x, K2x, K9x, KBx, KMx, KNx, KPx v 2374-K1x, K2x, v 2378-EMx v 2378-DTx, DUx, ETx, EUx, FTx v 2378-R1x, R3x, R4x, RPx, RQx v 2379-R1x 13N5105 N 10 Clear plate 13R2455 N ThinkPad T40/T40p, T41/T41p, T42/T42p Series 225 Parts list 14.1-in. SXGA+ TFT No. FRU a-d 1 2 226 P/N CRU ID See “Miscellaneous parts” on page 243. LCD cover kit (WW) 13R2569 v 2373-32x, 33x, 58x, 91x, 92x, 93x, 94x except 94K, 96x, 9Ax, 9Bx, 9Cx, A1x, A8x, A9x, G1x except G1K, G2x v 2373-3Fx, 3Hx, 3Px, 5Qx, 5Rx, 9Ex, 9Fx, 9Gx, 9Hx, 9Jx, 9Kx, AEx, AJx, AKx, AMx, ANx, BHx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2373-3Ux, 3Vx, 3Wx, 3Zx, 4Ux, 5Xx, 8Xx, 8Zx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, BTx, BVx, BXx, BYx, BZx, GRx, GSx, GTx, GUx, GVx, GXx, GYx, GZx, KYx, KUx v 2373-H4x, H5x, H6x, H7x, K5x, KCx, KDx, KFx, KJx, KQx, Mxx, Pxx v 2374-9Cx v 2374-3Hx, GGx v 2374-3Vx v 2374-K5x v 2378-DEx, EEx, ENx, EPx v 2378-EVx, FVx v 2378-R5x, RRx v 2379-D5x, D6x v 2379-DJx, ESx v 2379-R5x N LCD cover kit (Korea) for T40/T40p v 2373-94K, G1K 13R2570 N Hinges 91P8388 N T40/T40p, T41/T41p, T42/T42p Parts list No. FRU P/N CRU ID 3 LCD cable assembly, 14.1-in. SXGA+ 91P6787 v 2373-32x, 33x, 3Cx, 58x, 91x, 92x, 93x, 94x, 96x, 9Cx, A1x, A8x, A9x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-3Fx, 3Hx, 3Px, 5Qx, 5Rx, 9Ex, 9Fx, 9Gx, 9Jx, 9Hx, 9Kx, AEx, AJx, AKx, AMx, BHx, ANx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2373-3Ux, 3Vx, 3Wx, 3Zx, 4Ux, 5Xx, 8Xx, 8Zx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, BTx, BVx, BXx, BYx, BZx, GRx, GSx, GTx, GUx, GVx, GXx, GYx, GZx, KTx, KUx v 2373-H4x, H5x, H6x, H7x, K5x, KCx, KDx, KFx, KJx, KQx, Mxx, Pxx v 2374-9Cx v 2374-3Hx, GGx v 2374-3Vx v 2374-K5x v 2378-DEx, EEx, EKx, ENx, EPx v 2378-EVx, FVx v 2378-R5x, RRx v 2379-D5U, D6U v 2379-DJx, ESx v 2379-R5x N 4 Wireless AUX antenna N 13N5517 (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 227 Parts list No. FRU P/N CRU ID 5 Bluetooth wireless antenna assembly 13N5515 v 2373-32x, 33x, 3Cx, 42x, 4Ax, 58x, 91x, 92x, 93x, 94x, 96x, 9Cx, A1x, A8x, A9x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-3Fx, 3Hx, 3Px, 5Qx, 5Rx, 9Ex, 9Fx, 9Gx, 9Jx, 9Hx, 9Kx, AEx, AJx, AKx, AMx, BHx, ANx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2373-3Ux, 3Zx, 9Ux, 9Vx, 9Wx, 9Yx, BTx, BVx, BXx, BYx, BZx, GRx, GSx, GTx, GVx, GXx, GYx, GZx, GWx, KTx, KUx v 2373-H4x, H5x, H6x, H7x, K5x, KCx, KDx, KFx, KJx, KQx, Mxx, Pxx v 2374-9Cx v 2374-3Hx, GGx v 2374-8Wx, 9Wx, GTx v 2374-K5x v 2378-DEx, EEx, EKx, ENx, EPx v 2378-EVx, FVx v 2378-R5x, RRx v 2379-D5U, D6U v 2379-DJx, ESx v 2379-R5x N 6 Antenna assembly 13N5517 N 7 Tape on Bluetooth wireless antenna 13N5105 v 2373-32x, 33x, 3Cx, 42x, 4Ax, 58x, 91x, 92x, 93x, 94x, 96x, 9Cx, A1x, A8x, A9x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-3Fx, 3Hx, 3Px, 5Qx, 5Rx, 9Ex, 9Fx, 9Gx, 9Jx, 9Hx, 9Kx, AEx, AJx, AKx, AMx, BHx, ANx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2373-3Ux, 3Zx, 9Ux, 9Vx, 9Wx, 9Yx, BTx, BVx, BXx, BYx, BZx, GRx, GSx, GTx, GVx, GXx, GYx, GZx, GWx, KTx, KUx v 2373-H4x, H5x, H6x, H7x, K5x, KCx, KDx, KFx, KJx, KQx, Mxx, Pxx v 2374-9Cx v 2374-3Hx, GGx v 2374-8Wx, 9Wx, GTx v 2378-DEx, EEx, EKx, ENx, EPx v 2378-EVx, FVx v 2378-R5x, RRx v 2379-D5U, D6U v 2379-DJx, ESx v 2379-R5x N 8 Inverter card N (continued) 228 T40/T40p, T41/T41p, T42/T42p 26P8464 Parts list No. FRU 9 P/N CRU ID LCD panel, 14.1-in. SXGA+ for T40/T40p, T41/T41p, T42/T42p v 2373-32x, 33x, 3Cx, 58x, 91x, 92x, 93x, 94x, 96x, 9Cx, A1x, A8x, A9x, G1x, G2x, G3x, G4x, G5x, G6x v 2373-3Fx, 3Hx, 3Px, 5Qx, 5Rx, 9Ex, 9Fx, 9Gx, 9Jx, 9Hx, 9Kx, AEx, AJx, AKx, AMx, BHx, ANx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2373-3Ux, 3Vx, 3Wx, 3Zx, 4Ux, 5Xx, 8Wx, 8Zx, 9Tx, 9Ux, 9Vx, 9Wx, 9Yx, BTx, BVx, BXx, BYx, BZx, GRx, GSx, GTx, GVx, GWx, GXx, GYx, GZx, KTx, KUx v 2373-H4x, H5x, H6x, H7x, K5x, KCx, KDx, KFx, KJx, KQx, Mxx, Pxx v 2374-9Cx v 2374-3Hx, GGx v 2374-3Vx v 2374-K5x v 2378-DEx, EEx, EKx, ENx, EPx v 2378-EVx, FVx v 2378-R5x, RRx v 2379-D5U, D6U v 2379-DJx, ESx v 2379-R5x 10 ID Tech 11P8346 N Samsung 11P8348 N 13R2455 N Clear plate ThinkPad T40/T40p, T41/T41p, T42/T42p Series 229 Parts list 15.0-in. LCD FRUs 1 8 7 6 5 2 3 4 230 T40/T40p, T41/T41p, T42/T42p Parts list 15.0-in. XGA TFT No. FRU P/N CRU ID 1 LCD cover kit, 15.0-in. (WW) v 2373-4Yx, 6Yx, 7Yx, AUx, FYx v 2373-F2x, F3x, F5x, H8x, JBx, L1x, L2x v 2374-6Yx v 2374-L1x, F2x, F3x, F5x v 2378-2Zx, DVx, DWx, EWx, FZx v 2378-R6x, R7x, R8x, RSx v 2379-DZx v 2379-R6x, R8x 13R2917 N 2 Hinges, 15.0-in. 13R2918 N 3 LCD cable assembly, 15.0-in. XGA v 2373-4Yx, 6Yx, 7Yx, AUx, FYx v 2373-F2x, F3x, F5x, H8x, JBx, L1x, L2x v 2374-6Yx v 2374-L1x, F2x, F3x, F5x v 2378-2Zx, DVx, DWx, EWx, FZx v 2378-R6x, R7x, R8x, RSx v 2379-DZx v 2379-R6x, R8x 91P6856 N 4 Bluetooth wireless antenna, 15.0-in. v 2373-F2x, F3x, F5x, JBx, L1x v 2374-L1x 91P6860 N 5 Antenna, 15.0-in. 91P6859 N 6 Inverter card, TN v 2373-4Yx, 6Yx, 7Yx, AUx, FYx v 2373-F2x, F3x, F5x, H8x, JBx, L1x, L2x v 2374-6Yx v 2374-L1x, F2x, F3x, F5x v 2378-2Zx, DVx, DWx, EWx, FZx v 2378-R6x, R7x, R8x, RSx v 2379-DZx v 2379-R6x, R8x 91P7422 N 7 LCD panel, 15.0-in. XGA v 2373-4Yx, 6Yx, 7Yx, AUx, FYx v 2373-F2x, F3x, F5x, H8x, JBx, L1x, L2x v 2374-6Yx v 2374-L1x, F2x, F3x, F5x v 2378-2Zx, DVx, DWx, EWx, FZx v 2378-R6x, R7x, R8x, RSx v 2379-DZx v 2379-R6x, R8x Samsung 92P6701 N LG 92P6699 N Clear plate 13R2455 N 8 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 231 Parts list 15.0-in. SXGA+ IPS TFT No. FRU P/N CRU ID 1 LCD cover kit, 15.0-in. (WW) v 2373-3Xx, 3Yx, 8Yx, AYx, BUx, CUx, Cvx, CWx, CXx, CYx, JXx v 2373-H9x, HAx, KKx, L3x, L4x, L5x, L6x, L7x, L8x, Nxx v 2374-3Xx v 2378-DXx, EXx, EYx v 2378-RTx, RUx v 2379-DXx, EYx v 2379-RUx 13R2917 N 2 Hinges, 15.0-in. 13R2918 N 3 LCD cable assembly, 15.0-in. SXGA+ v 2373-3Xx, 3Yx, 8Yx, AYx, BUx, CUx, Cvx, CWx, CXx, CYx, JXx v 2373-H9x, HAx, KKx, L3x, L4x, L5x, L6x, L7x, L8x, Nxx v 2374-3Xx v 2378-DXx, EXx, EYx v 2378-RTx, RUx v 2379-DXx, EYx v 2379-RUx 91P6857 N 4 Bluetooth wireless antenna, 15.0-in. v 2373-3Xx, 3Yx, 8Yx, AYx, BUx, CUx, Cvx, CWx, CXx, CYx, JXx v 2373-H9x, HAx, KKx, L3x, L4x, L5x, L6x, L7x, L8x, Nxx v 2374-3Xx v 2378-DXx, EXx, EYx v 2378-RTx, RUx v 2379-DXx, EYx v 2379-RUx 91P6860 N 5 Antenna, 15.0-in. 91P6859 N 6 Inverter card, IPS v 2373-3Xx, 3Yx, 8Yx, AYx, BUx, CUx, Cvx, CWx, CXx, CYx, JXx v 2373-H9x, HAx, KKx, L3x, L4x, L5x, L6x, L7x, L8x, Nxx v 2374-3Xx v 2378-DXx, EXx, EYx v 2378-RTx, RUx v 2379-DXx, EYx v 2379-RUx 93P4161 N (continued) 232 T40/T40p, T41/T41p, T42/T42p Parts list No. FRU P/N CRU ID 7 LCD panel, 15.0 SXGA+ (ID Tech) v 2373-3Xx, 3Yx, 8Yx, AYx, BUx, CUx, Cvx, CWx, CXx, CYx, JXx v 2373-H9x, HAx, KKx, L3x, L4x, L5x, L6x, L7x, L8x, Nxx v 2374-3Xx v 2378-DXx, EXx, EYx v 2378-RTx, RUx v 2379-DXx, EYx v 2379-RUx 92P6680 N 8 Clear plate 13R2455 N ThinkPad T40/T40p, T41/T41p, T42/T42p Series 233 Parts list 15.0-in. UXGA IPS TFT No. FRU a-d P/N CRU ID See “Miscellaneous parts” on page 243. 1 LCD cover kit, 15.0-in. (WW) 13R2917 v 2373-AZx, HTx, HVx, HWx, HXx, HYx, KXx, KYx, KZx v 2373-F4x, HBx, Qxx v 2374-7Xx, HTx v 2374-Q2x v 2378-DYx, EZx v 2378-RVx v 2379-DYx, EZx v 2379-RVx N 2 Hinges, 15.0-in. 13R2918 N 3 LCD cable assembly 15.0 UXGA 91P6858 v 2373-AZx, HTx, HVx, HWx, HXx, HYx, KXx, KYx, KZx v 2373-F4x, HBx, Qxx v 2374-7Xx, HTx v 2374-Q2x v 2378-DYx, EZx v 2378-RVx v 2379-DYx, EZx v 2379-RVx N 4 Bluetooth wireless antenna, 15.0-in. 91P6860 v 2373-AZx, HTx, HVx, HWx, HXx, HYx, KXx, KYx, KZx v 2373-F4x, HBx, Qxx v 2374-7Xx, HTx v 2374-Q2x v 2378-DYx, EZx v 2378-RVx v 2379-DYx, EZx v 2379-RVx N 5 Antenna, 15.0-in. 91P6859 N 6 Inverter card, IPS 93P4161 v 2373-AZx, HTx, HVx, HWx, HXx, HYx, KXx, KYx, KZx v 2374-7Xx, HTx v 2378-DYx, EZx v 2379-DYx, EZx N 7 LCD panel, 15.0 UXGA (ID Tech) 92P6683 v 2373-AZx, HTx, HVx, HWx, HXx, HYx, KXx, KYx, KZx v 2373-F4x, HBx, Qxx v 2374-7Xx, HTx v 2374-Q2x v 2378-DYx, EZx v 2378-RVx v 2379-DYx, EZx v 2379-RVx N 8 Clear plate N 234 T40/T40p, T41/T41p, T42/T42p 13R2455 Parts list Keyboard Table 1. Keyboards for 15.0-in. LCD models Language P/N (NMB) P/N (ALPS) P/N (CHICONY) CRU ID Arabic 93P4801 93P4861 13N9914 ** Belgian 93P4796 93P4856 13N9909 Chinese, Traditional 93P4798 93P4858 13N9911 Czech 93P4802 93P4862 13N9915 Danish 93P4789 93P4849 13N9902 Dutch 93P4786 93P4846 13N9899 English, U.K. 93P4782 93P4842 13N9895 English, U.S. 93P4780 93P4840 13N9893 English, U.S. (International) 91P9248 — 13N9922 French, Canadian 93P4783 93P4843 13N9896 French, Canadian (058) 93P4809 93P4869 13N9923 French, European 93P4785 93P4845 13N9898 German 93P4784 93P4844 13N9897 Greek 93P4804 93P4864 13N9917 Hungarian 93P4803 93P4863 13N9916 Hebrew 93P4800 93P4860 13N9913 Italian 93P4790 93P4850 13N9903 Japanese 93P4781 93P4841 13N9894 Korean 93P4795 93P4855 13N9908 Norwegian 93P4788 93P4848 13N9901 Polish 93P4806 93P4866 13N9919 Portuguese 93P4793 93P4853 13N9906 Russian 93P4799 93P4859 13N9912 Slovak 93P4805 93P4865 13N9918 Slovenian 93P4807 93P4867 13N9920 Spanish, European 93P4791 93P4851 13N9904 Spanish, Latin American 93P4794 93P4854 13N9907 Swedish or Finnish 93P4787 93P4847 13N9900 Swiss 93P4792 93P4852 13N9905 Thai 93P4808 93P4868 13N9921 Turkish 93P4797 93P4857 13N9910 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 235 Parts list Table 2. Keyboards for 14.1-in. LCD models Language P/N (NMB) P/N (CHICONY) CRU ID Arabic 08K5065 13N9852 ** Belgian 08K5060 13N9847 Chinese, Traditional 08K5062 13N9849 Czech 08K5066 13N9853 Danish 08K5053 13N9840 Dutch 08K5050 13N9837 English, U.K. 08K5046 13N9833 English, U.S. 08K5044 13N9831 English, U.S. (International) 93P4719 13N9860 French, Canadian 08K5047 13N9834 French, Canadian (058) 93P4744 13N9861 French, European 08K5049 13N9836 German 08K5048 13N9835 Greek 08K5068 13N9855 Hungarian 08K5067 13N9854 Hebrew 93P4711 13N9851 Italian 08K5054 13N9841 Japanese 08K5045 13N9832 Korean 08K5059 13N9846 Norwegian 08K5052 13N9839 Polish 08K5070 13N9857 Portuguese 08K5057 13N9844 Russian 08K5063 13N9850 Slovak 08K5069 13N9856 Slovenian 08K5071 13N9858 Spanish, European 08K5055 13N9842 Spanish, Latin American 08K5058 13N9845 Swedish or Finnish 08K5051 13N9838 Swiss 08K5056 13N9843 Thai 08K5072 13N9859 Turkish 08K5061 13N9848 236 T40/T40p, T41/T41p, T42/T42p Parts list Recovery CDs Windows XP Professional (for T40/T40p series) Windows XP Professional is preinstalled as the operating system in the following models: v 2373-12x, 14x, 19x, 1Bx, 22x, 24x, 29x, 2Ax, 2Bx, 2Cx, 32x, 33x, 3Cx, 42x, 44x, 47x, 49x, 4Ax, 4Bx, 4Cx, 51x, 54x, 58x, 61x, 6Bx, 71x, 72x, 75x, 76x, 78x, 7Ax, 7Cx, 81x, 82x, 85x, 86x, 88x, 8Ax, 8Cx, 8Dx, 91x, 92x, 94x, 96x, 9Cx, C3x, C4x, C7x, C8x, CAx, G1x, G2x, G3x, G4x, G5x, G6x v 2374-12x, 14x, 72x, 75x, 7Cx, 82x, 8Cx v 2375-72x v 2376-72x v 2378-D1U, D2U v 2379-D3U, D4U, D5U, D6U Language P/N CRU ID Arabic 01R8058 * Chinese, Simplified 01R8253 Chinese, Traditional 01R8252 Chinese, Traditional (Hong Kong S.A.R.) 01R8254 Czech 01R8059 Danish 01R8049 Dutch 01R8056 English, U.K. 01R8047 English, U.S. 01R8046 Finnish 01R8055 French 01R8050 German 01R8051 Greek 01R8063 Hebrew 01R8060 Hungarian 01R8064 Italian 01R8054 Japanese 01R8255 Norwegian 01R8057 Polish 01R8061 Portuguese 01R8048 Russian 01R8065 Spanish 01R8052 Swedish 01R8053 Turkish 01R8062 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 237 Parts list Windows XP Professional (for T41/T41p series) Windows XP Professional is preinstalled as the operating system in the following models: v 2373-1Ex, 1Fx, 1Hx, 1Lx, 2Ex, 2Fx, 2Qx, 2Rx, 3Fx, 3Hx, 3Px, 4Fx, 4Gx, 4Hx, 4Nx, 4Px, 4Qx, 4Sx, 5Hx, 5Qx, 7Ex, 7Fx, 7Jx, 7Kx, 7Mx, 7Px, 8Hx, 8Jx, 8Kx, 8Px, 8Rx, 8Sx, 9Ex, 9Fx, 9Hx, 9Jx, 9Kx, 9Px, 9Rx, GEx, GGx, GHx, GJx, GKx, GLx, GMx v 2374-1Hx, 1Fx, 3Hx, 7Fx, 7Jx, 8Rx, GGx v 2378-DEx, DFx, DGx, DHx v 2379-DJx, DKx Language P/N CRU ID Arabic 24R4557 * Chinese, Simplified 24R4550 Chinese, Traditional 24R4551 Chinese, Traditional (Hong Kong S.A.R.) 24R4552 Czech 24R4556 Danish 24R4546 Dutch 24R4549 English, U.K. 24R4539 English, U.S. 24R4538 Finnish 24R4547 French 24R4540 German 24R4541 Greek 24R4561 Hebrew 24R4554 Hungarian 24R4560 Italian 24R4543 Japanese 24R4553 Norwegian 24R4548 Polish 24R4555 Portuguese, Brazilian 24R4544 Russian 24R4558 Spanish 24R4542 Swedish 24R4545 Turkish 24R4559 238 T40/T40p, T41/T41p, T42/T42p Parts list Windows XP Professional (for T42/T42p series) Windows XP Professional is preinstalled as the operating system in the following models: v 2373-1Ux, 1Wx, 1Yx, 1Zx, 2Tx, 2Ux, 2Wx, 2Xx, 2Yx, 3Ux, 3Vx, 3Wx, 3Xx, 3Yx, 3Zx, 4Tx, 4Ux, 4Vx, 4Wx, 4Xx, 4Yx, 4Zx, 5Tx, 5Xx, 5Wx, 6Ux, 6Vx, 6Wx, 6Yx, 6Zx, 7Tx, 7Vx, 7Wx, 7Xx, 7Yx, 7Zx, 8Tx, 8Ux, 8Vx, 8Xx, 8Yx, 8Zx, 9Tx, 9Ux, 9Vx, 9Xx, 9Zx, CUx, CVx, CWx, CXx, CYx, FWx, FYx, GRx, GSx, GTx, GUx, GVx, GXx, GYx, GZx, HTx, HVx, HWx, HXx, HYx, JTx, JXx v 2373-F1x, F2x, F3x, F4x, F5x, J1x, J2x, J3x, J4x, J5x, J6x, J7x, J8x, J9x, JAx, JBx, JCx, JEx, JFx, Kxx, Lxx, Mxx, Nxx, Pxx, Qxx v 2374-1Wx, 3Vx, 3Xx, 4Wx, 6Vx, 6Yx, 7Xx, 8Tx, 8Wx, 9Wx, GTx, HTx v 2374-J4x, Kxx, L1x, Q2x, v 2378-2Xx, 5Ux, DTx, DUx, DVx, DWx, DXx, DYx, FUx, FZx v 2378-R1x, R2x, R3x, R4x, R5x, R6x, R7x, R8x, R9x v 2379-5Vx, DWx, DXx, DYx v 2379-R1x, R5x, R6x, R8x, R9x ThinkPad T40/T40p, T41/T41p, T42/T42p Series 239 Parts list Language P/N CRU ID Arabic 24R7703 * Chinese, Simplified 24R7696 Chinese, Traditional 24R7697 Chinese, Traditional (Hong Kong S.A.R.) 24R7698 Czech 24R7702 Danish 24R7692 Dutch 24R7695 English, Russia 39K9693 English, U.K. 24R7685 English, U.S. 24R7684 Finnish 24R7693 French 24R7686 German 24R7687 Greek 24R7707 Hebrew 24R7700 Hungarian 24R7706 Italian 24R7689 Japanese 24R7699 Korean 24R7708 Norwegian 24R7694 Polish 24R7701 Portuguese, Brazilian 24R7690 Russian 39K9625 Spanish 24R7688 Swedish 24R7691 Turkish 24R7705 240 T40/T40p, T41/T41p, T42/T42p Parts list Windows 2000 (for T40/T40p series) Windows 2000 is preinstalled as the operating system in the following models: v 2373-16x, 25x, 66x, 6Dx, 93x, B2x, B5x, BDx, C1x Language P/N CRU ID Arabic 01R8158 * Chinese, Simplified 01R8249 Chinese, Traditional 01R8248 Chinese, Traditional (Hong Kong S.A.R.) 01R8250 Czech 01R8159 Danish 01R8149 Dutch 01R8156 English, U.K. 01R8147 English, U.S. 01R8146 Finnish 01R8155 French 01R8150 German 01R8151 Greek 01R8163 Hebrew 01R8160 Hungarian 01R8164 Italian 01R8154 Japanese 01R8251 Norwegian 01R8157 Polish 01R8161 Portuguese 01R8148 Russian 01R8165 Spanish 01R8152 Swedish 01R8153 Turkish 01R8162 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 241 Parts list Windows 2000 (for T41 series) Windows 2000 is preinstalled as the operating system in the following models: v 2373-5RJ, 6KJ, 6SJ, 9GJ, BFJ, BJJ, BHJ Language P/N CRU ID Japanese 24R4826 * Windows XP Home Edition (for T42/T42p series) Windows XP Home Edition is preinstalled as the operating system in the following models: v 2373-JDx Language P/N CRU ID Arabic 24R6811 * Chinese, Simplified 24R6804 Chinese, Traditional 24R6805 Chinese, Traditional (Hong Kong S.A.R.) 24R6806 Czech 24R6810 Danish 24R6800 Dutch 24R6803 English, U.K. 24R6793 English, U.S. 24R6792 Finnish 24R6801 French 24R6794 German 24R6795 Greek 24R6815 Hebrew 24R6808 Hungarian 24R6814 Italian 24R6797 Japanese 24R6807 Norwegian 24R6802 Polish 24R6809 Portuguese, Brazilian 24R6798 Russian 24R6812 Spanish 24R6796 Swedish 24R6799 Turkish 24R6813 242 T40/T40p, T41/T41p, T42/T42p Parts list Miscellaneous parts FRU P/N CRU ID Screw kit (including nylon-coated screws): v M2 × 2.7 mm (silver), small head (10) v M2 × 3 mm (silver), small head (20) v M2 × 3 mm (from outside), pan head (10) v M2 × 4 mm (black), bind head (30) v M2 × 4 mm (black), small head (10) v M2 × 5 mm (gold), bind head (2) v M2 × 5 mm (black), flat head (20) v M2 × 10 mm (black), flat head (30) v M2 × 12 mm (black), flat head (5) v M2 × 14 mm (black), bind head (10) v M2 × 14 mm (black), TR7 (5) v M2 × 14.9 mm for drive bay (5) v M2 × 19 mm (black), bind head (5) v M2.5 × 3 mm (gold), flat head (5) v M2.5 × 4.8 mm (black), bind head (10) v M3 × 3 mm (PHILLIPS/slotted) (2) v Hex stud (5) v Security screw (1) v Screw caps (square, thin) v Screw caps (oval, not painted) v Screw caps (not painted) v Screw caps (square) v Tape on Bluetooth wireless antenna 13R2916 N Base miscellaneous parts (14.1-in. LCD models): v Cover, PC Card slot v Spacer, PC Card slot v Spring, PC Card slot cover v Rubber foot (rear) v Rubber foot (front) v Insulation sheet v Battery lock knob L v Battery lock latch L v Battery lock knob R v Battery lock latch R v Spring, battery lock v Slide lever v Slide lever spring v Pull lever v Pull lever spring v Puller v Rubber, shock absorber v Insulation, bottom v Foam under fan v Cu tape under fan v Cu tape v Insulation, louver v Screw caps (square, thin) 13N5104 N (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 243 Parts list FRU P/N CRU ID Base miscellaneous parts (15.0-in. LCD models): v Cover, PC Card slot v Spring, PC Card slot cover v Rubber foot (rear) v Rubber foot (front) v Battery lock knob L v Battery lock latch L v Battery lock knob R v Link, battery lock v Spring, battery lock v Slide lever v Slide lever spring v Pull lever v Pull lever spring v Puller v Rubber, shock absorber v Insulation sheet v Insulation, bottom v Foam under fan v Foam under system board, front v Foam under system board, rear v Cu plate, video v Insulation, louver v Screw caps (square, thin) 13R2914 N System miscellaneous parts (14.1-in. LCD models): v Cable, RJ11-docking connector on system board v DC in cable v (c) Hard disk drive guide rail v Spacer for DSP connector v (e) I/O plate bracket v (f) Support structure v Harness (left) v (b) Antenna cable guide v Bracket holder, LCD cable v (d) EMI spring, CDC v Connector bag v Screw cap (square, thin) 91P8681 N Note: Italicized letters in parentheses are references to the exploded view on page 191. (continued) 244 T40/T40p, T41/T41p, T42/T42p Parts list FRU P/N CRU ID System miscellaneous parts (15.0-in. LCD models): v Cable, RJ11-docking connector on system board v DC in cable v (c) Hard disk drive guide rail v Sheet for DSP connector v (e) I/O plate bracket v (f) Support structure v Harness (left) v (b) Antenna cable guide v Bracket holder, LCD cable v (d) EMI spring, CDC v Connector bag 13R2915 N System board miscellaneous parts: v Insulator, PC Card slot v Insulator, louver v Insulator, docking latch v Insulator, security chip v Insulator, docking connector v Insulator, fan v Insulator, Mg v S-video gasket v Form on system board v Insulator, louver, hard disk drive v Mic rubber v Stud, triangle v Audio connector bracket v Security chip spacer v Stud, system board v Screw cap (square, thin) 13R2913 N Base, PC Card slot kit for T40/T40p: v Cover, PC Card slot v Spacer, PC Card slot v Spring, PC Card slot cover 13N5345 N Note: Italicized letters in parentheses are references to the exploded view on page 191. (continued) ThinkPad T40/T40p, T41/T41p, T42/T42p Series 245 Parts list FRU P/N CRU ID LCD miscellaneous parts (14.1-in. LCD models): v Tape, LCD FPC v Tape on Bluetooth wireless antenna v (a) LCD latch R v (b) LCD latch L assembly v (c) Cable bushing (lower) v (d) Cable bushing (upper) v LED lens v Cable clip v Spiral tube v Screw caps (square, thin) v Screw caps (oval, not painted) v Screw caps (not painted) v Screw caps (square) 13R2449 N P/N CRU ID Note: Italicized letters in parentheses are references to the exploded view on page 220. AC adapters FRU 3-pin (72W) slim adapter for PFC model (models xxA, xxB, xxC, xxG, xxH, xxK, xxM, xxV) ASTEC OP 08K8203 * DELTA OP 08K8207 * SANKEN OP 08K8211 * 2-pin (72W) slim adapter for non-PFC model (models xxE, xxF, xxJ, xxP, xxS, xxU, xxY) 246 ASTEC OP 08K8205 * DELTA OP 08K8209 * SANKEN OP 08K8213 * T40/T40p, T41/T41p, T42/T42p Parts list Optional FRUs FRU P/N CRU ID 1-GB DDR SDRAM SO-DIMM (PC2100) 10K0035 * Hard disk drive, 80 GB, 9.5 mm, 4200 rpm, ThinkPad STD 08K9863 * Ultrabay Slim hard disk drive adapter 62P4553 * Ultrabay Slim Li Polymer battery (2nd bay battery), Sanyo (WW) 08K8191 * ThinkPad Dock II 67P9010 * Top cover and screw kit for ThinkPad Dock II 46P3085 ** PCI cover for ThinkPad Dock II 46P3086 * ThinkPad Mini Dock 67P9011 * AC adapter (2 pin, 120 W), DELTA for ThinkPad Mini Dock 02K7086 * AC adapter (2 pin, 120 W), LITEON for ThinkPad Mini Dock 02K7092 * AC adapter (3 pin, 120 W), LITEON for ThinkPad Mini Dock 02K7094 * AC adapter (3 pin, 120 W), LITEON for ThinkPad Mini Dock 02K7096 * ThinkPad Port Replicator II 74P6735 * ThinkPad Slim Drive Adapter for Ultrabay 2000 62P4556 * Multiple battery charger 02K6642 * Diskette drive cable 27L0525 * Diskette drive (TEAC) 08K9606 * Diskette drive (Sony) 08K9607 * ThinkPad T40/T40p, T41/T41p, T42/T42p Series 247 Parts list Common parts list Tools Tool P/N Triconnector wrap plug 72X8546 PC test card 35G4703 Audio wrap cable 66G5180 USB parallel test cable 05K2580 Screwdriver kit 95F3598 Mini PC tool set 00P7033 1/4" drive spinner handle 1650840 1/4" Sq. to 1/4" hex torx adapter 93F2838 TR7-TR-10 tamper resistant torx bits 00P6967 Removal tool antenna RF connector 08K7159 USB floppy disk drive for maintenance diskette 05K9283 ThinkPad Hardware Maintenance Diskette Version 1.73 or later Note: Download the file from the following Web site: http://www.lenovo.com/think/spm — Power cords (system) A ThinkPad power cord for a specific country or region is usually available only in that country or region: For 2-pin power cords: Region P/N Canada, U.S. 13H5264 * Japan 74P4331 Argentina 36L8870 Brazil 49P2095 248 T40/T40p, T41/T41p, T42/T42p CRU ID Parts list For 3-pin power cords: Region P/N CRU ID Australia, New Zealand 76H3514 * Taiwan, Thailand 76H3516 Italy 76H3530 Denmark 76H3520 U.K., China (Hong Kong S.A.R.) 76H3524 European countries 76H3518 India, South Africa 76H3522 Israel 76H3532 Korea 76H3535 China (P.R.C.) (other than Hong Kong S.A.R.) 02K0539 Switzerland 76H3528 Power cords (ThinkPad Dock II) A ThinkPad power cord for a specific country or region is usually available only in that country or region: For 3-pin power cords: Region P/N CRU ID Argentina 36L8868 * Australia, New Zealand 75H8988 Brazil 49P2101 Canada, Thailand, U.S. 75H8989 Denmark 75H8992 European countries 75H8990 India, South Africa 75H8993 Israel 75H8999 Italy 75H8998 Japan 75H8996 Korea 76H3536 China (P.R.C.) (other than Hong Kong S.A.R) 02K0540 Switzerland 75H8997 U.K. 75H8994 ThinkPad T40/T40p, T41/T41p, T42/T42p Series 249 Notices Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user’s responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: Lenovo (United States), Inc. 500 Park Offices Drive, Hwy. 54 Research Triangle Park, NC 27709 U.S.A. Attention: Lenovo Director of Licensing LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments 250 T40/T40p, T41/T41p, T42/T42p Notices and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. ThinkPad T40/T40p, T41/T41p, T42/T42p Series 251 Trademarks Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both: Lenovo Rescue and Recovery ThinkLight ThinkPad ThinkPad Dock II ThinkPad Mini Dock ThinkPad Port Replicator ThinkPad Port Replicator II TrackPoint Ultrabay Ultrabay 2000 Ultrabay Plus UltraNav The following terms are trademarks of the International Business Machines Corporation in the United States, other countries, or both: IBM (used under license) OS/2 Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Other company, product, or service names may be the trademarks or service marks of others. 252 T40/T40p, T41/T41p, T42/T42p Trademarks ThinkPad T40/T40p, T41/T41p, T42/T42p Series 253 Part Number: 39T6192 (1P) P/N: 39T6192
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Count : 260 Page Mode : UseOutlines XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:5a24b9b0-c2d4-4331-a2e2-62d7df1bcbf4 Producer : Acrobat Distiller 6.0 (Windows) Identifier : 39T6192 Keywords : Create Date : 2006:02:23 10:31:38Z Creator Tool : XPP Modify Date : 2006:02:23 10:31:38Z Document ID : uuid:943e2412-a4d3-4427-917a-c14e26724308 Format : application/pdf Title : T40/T40p, T41/T41p, T42/T42p Creator : Lenovo Description : Tagged PDF : Yes Author : Lenovo Subject :EXIF Metadata provided by EXIF.tools