Lenovo Z410Z510Z510Touch Hmm Z410&Z510&Z510 Touch User Manual Hardware Maintenance Idea Pad Z410, Z510 Laptop (ideapad)

2013-09-12

User Manual: Lenovo Lenovo Z410Z510Z510Touch Hmm Hardware Maintenance Manual - IdeaPad Z410, Z510 Z510 Laptop (ideapad) ideapad Z510 Notebook

Open the PDF directly: View PDF .
Page Count: 114

Download
Open PDF In Browser	View PDF

Lenovo Z410/Z510/
Z510 Touch
Hardware
Maintenance
Manual

Notes:
• Before using this information and the product it supports, be sure to read the general information under
“Notices” on page 109.
• This manual applies to the following models: Lenovo Z410/Z510/Z510 Touch. The illustrations used in
this manual are for Lenovo Z510 unless otherwise stated.

First Edition (August. 2012)
© Copyright Lenovo 2012. All rights reserved.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
© 2012 Lenovo

Contents
About this manual........................................ iv
Safety information......................................... 1
General safety................................................. 2
Electrical safety............................................... 3
Safety inspection guide................................... 5
Handling devices that are sensitive to
electrostatic discharge..................................... 6
Grounding requirements.................................. 6
Safety notices: multilingual translations.......... 7
Laser compliance statement......................... 14
Important service information.................... 16
Strategy for replacing FRUs.......................... 16

Strategy for replacing a hard disk drive.............17
Important notice for replacing a
system board ....................................................17

Important information about replacing
RoHS compliant FRUs.................................. 18
General checkout ....................................... 19
What to do first.............................................. 20
Power system checkout................................ 21

Checking the AC adapter ..................................21
Checking operational charging..........................21

1080 Fan assembly and Heat
Sink assembly...................................................51
1090 CPU..........................................................54
1100 ODD board and LED board
(Z510/Z510 Touch)............................................55
1110 Speakers...................................................57
1120 System board............................................. 60
1130 LCD unit....................................................65
1140 Keyboard bezel.......................................... 68
1150 LCD front bezel/LCD hinge cover.............70
1160 LCD panel/LCD module............................72
1170 LCD Hinges...............................................75
1180 Integrated camera, LCD cable
and antenna assembly .....................................77

Locations....................................................... 81

Front view and right-side view...........................81
Bottom and Left-side view ................................83

Parts list......................................................... 84

Overall...............................................................85
LCD FRUs.........................................................93
Keyboard...........................................................98
Miscellaneous parts.........................................104
AC adapters.....................................................105
Screws.............................................................105
Power cords.....................................................106

Notices....................................................... 109
Trademarks..................................................110

Related service information....................... 23
Restoring the factory contents by using
OneKey Recovery......................................... 23

Restore of factory default..................................23

Passwords..................................................... 24

Power-on password...........................................24
Hard-disk password...........................................24
Administrator password ....................................24

Power management...................................... 25

Screen blank mode............................................25
Sleep (standby) mode.......................................25

Lenovo Z410/Z510/Z510 Touch................... 26
Specifications................................................ 26
Status indicators............................................ 28
Function key combinations............................ 30
FRU replacement notices.............................. 31

Screw notices ...................................................31

Removing and replacing an FRU.................. 32

1010 Keyboard..................................................33
1020 Optical drive..............................................37
1030 Base cover................................................39
1040 Battery pack..............................................44
1050 Hard disk drive..........................................46
1060 PCI Express Mini Card for
wireless LAN......................................................48
1070 DIMM........................................................50

iii

About this manual
This manual contains service and reference information for the following
Lenovo product:
Lenovo Z410/Z510/Z510 Touch
Use this manual to troubleshoot problems.
The manual is divided into the following sections:
• The common sections provide general information, guidelines, and safety
information required for servicing computers.
• The product-specific section includes service, reference, and product-specific
parts information.

Important:
This manual is intended only for trained servicers who are familiar with Lenovo
products. Use this manual to troubleshoot problems effectively.
Before servicing a Lenovo product, make sure to read all the information under
“Safety information” on page 1 and “Important service information” on page 16.

Safety information

Safety information
This chapter presents the following safety information that you need to get
familiar with before you service an Lenovo Z410/Z510/Z510 Touch computer:
• “General safety” on page 2
• “Electrical safety” on page 3
• “Safety inspection guide” on page 5
• “Handling devices that are sensitive to electrostatic discharge” on page 6
• “Grounding requirements” on page 6
• “Safety notices: multilingual translations” on page 7
• “Laser compliance statement” on page 14

Z410/Z510/Z510 Touch Hardware Maintenance Manual

General safety
Follow these rules below to ensure general safety:
• Observe a good housekeeping in the area where the machines are put
during and after the maintenance.
• When lifting any heavy object:
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt
to lift it.
4. Lift it by standing or pushing up with your leg muscles; this action could
avoid the strain from the muscles in your back. Do not attempt to lift any
object that weighs more than 16 kg (35 lb) or that you think is too heavy
for you.
• Do not perform any action that causes hazards to the customer, or that
makes the machine unsafe.
• Before you start the machine, make sure that other service representatives
and the customer are not in a hazardous position.
• Place removed covers and other parts in a safe place, keeping them away
from all personnel, while you are servicing the machine.
• Keep your toolcase away from walk areas so that other people will not trip it
over.
• Do not wear loose clothing that can be trapped in the moving parts of the
machine. Make sure that your sleeves are fastened or rolled up above your
elbows. If your hair is long, fasten it.
• Insert the ends of your necktie or scarf inside clothing or fasten it with the
nonconductive clip, about 8 centimeters (3 inches) from the end.
• Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for
your clothing.
Attention: Metal objects are good electrical conductors.
• Wear safety glasses when you are hammering, drilling, soldering, cutting
wire, attaching springs, using solvents, or working in any other conditions
that may be hazardous to your eyes.
• After service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
• Reinstall all covers correctly before returning the machine to the customer.
• Fan louvers on the machine help to prevent the overheating of internal
components. Do not obstruct fan louvers or cover them with labels or
stickers.

Safety information

Electrical safety
Observe the following rules when working on electrical equipments.

Important:
Use only approved tools and test equipments. Some hand tools have handles
covered with a soft material that does not insulate you when working with live
electrical currents.
Many customers have rubber floor mats near their machines that contain small
conductive fibers to decrease electrostatic discharges. Do not use such kind of mat
to protect yourself from electrical shock.
• Find the room emergency power-off (EPO) switch, disconnecting the switch
or electrical outlet. If an electrical accident occurs, you can then operate the
switch or unplug the power cord quickly.
• Do not work alone under hazardous conditions or near the equipment that
has hazardous voltages.
• Disconnect all power before:
– Performing a mechanical inspection
– Working near power supplies
– Removing or installing main units
• Before you start to work on the machine, unplug the power cord. If you
cannot unplug it, ask the customer to power-off the wall box that supplies
power to the machine, and to lock the wall box in the off position.
• If you need to work on a machine that has exposed electrical circuits,
observe the following precautions:
– Ensure that another person, familiar with the power-off controls, is near
you.
Attention: Another person must be there to switch off the power, if
necessary.
– Use only one hand when working with powered-on electrical equipment;
keep the other hand in your pocket or behind your back.
Attention: An electrical shock can occur only when there is a complete
circuit. By observing the above rule, you may prevent a current from
passing through your body.
– When using testers, set the controls correctly and use the approved
probe leads and accessories for that tester.
– Stand on suitable rubber mats (obtained locally, if necessary) to insulate
you from grounds such as metal floor strips and machine frames.
Observe the special safety precautions when you work with very high voltages;
instructions for these precautions are in the safety sections of maintenance
information. Be extremely careful when you measure the high voltages.
• Regularly inspect and maintain your electrical hand tools for safe operational
condition.
• Do not use worn or broken tools and testers.
• Never assume that power has been disconnected from a circuit. First, check
it to make sure that it has been powered off.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

• Always look carefully for possible hazards in your work area. Examples of
these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.
• Do not touch live electrical circuits with the reflective surface of a plastic
dental mirror. The surface is conductive; such touching can cause personal
injury and machine damage.
• Do not service the following parts with the power on when they are removed
from their normal operating places in a machine:
– Power supply units
– Pumps
– Blowers and fans
– Motor generators
and similar units. (This practice ensures correct grounding of the units.)
• If an electrical accident occurs:
– Caution: do not become a victim yourself.
– Switch off the power.
– Send the victim to get medical aid.

Safety information

Safety inspection guide
The purpose of this inspection guide is to assist you in identifying potential
unsafe conditions. As each machine was designed and built, required safety
items were installed to protect users and service personnel from injury. This
guide addresses only those items. You should use good judgment to identify
potential safety hazards according to the attachment of non-Lenovo features or
options not covered by this inspection guide.
If any unsafe conditions are present, you must determine how serious the
apparent hazard could be and whether you can continue without first correcting
the problem.
Consider these conditions and the safety hazards they present:
• Electrical hazards, especially primary power (primary voltage on the frame
can cause serious or fatal electrical shock)
• Explosive hazards, such as a damaged CRT face or a bulging capacitor
• Mechanical hazards, such as loose or missing hardware
To determine whether there are any potential unsafe conditions, use the
following checklist at the beginning of every service task. Begin the checks with
the power off, and the power cord disconnected.
Checklist:
1. Check exterior covers for damage (loose, broken, or sharp edges).
2. Turn off the computer. Disconnect the power cord.
3. Check the power cord for:
a. A third-wire ground connector in good condition. Use a meter to measure
third-wire ground continuity for 0.1 ohm or less between the external
ground pin and the frame ground.
b. The power cord should be the type specified in the parts list.
c. Insulation must not be frayed or worn.
4. Check for cracked or bulging batteries.
5. Remove the cover.
6. Check for any obvious non-Lenovo alterations. Use good judgment as to the
safety of any non-Lenovo alterations.
7. Check inside the unit for any obvious unsafe conditions, such as metal
filings, contamination, water or other liquids, or signs of fire or smoke
damage.
8. Check for worn, frayed, or pinched cables.
9. Check that the power-supply cover fasteners (screws or rivets) have not
been removed or tampered with.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Handling devices that are sensitive to electrostatic discharge
Any computer part containing transistors or integrated circuits (ICs) should be
considered sensitive to electrostatic discharge (ESD). ESD damage can occur
when there is a difference in charge between objects. Protect against ESD
damage by equalizing the charge so that the machine, the part, the work mat,
and the person handling the part are all at the same charge.

Notes:
1. Use product-specific ESD procedures when they exceed the requirements
noted here.
2. Make sure that the ESD protective devices you use have been certified (ISO
9000) as fully effective.

When handling ESD-sensitive parts:
• Keep the parts in protective packages until they are inserted into the product.
• Avoid contact with other people.
• Wear a grounded wrist strap against your skin to eliminate static on your
body.
• Prevent the part from touching your clothing. Most clothing is insulative and
retains a charge even when you are wearing a wrist strap.
• Use the black side of a grounded work mat to provide a static-free work
surface. The mat is especially useful when handling ESD-sensitive devices.
• Select a grounding system, such as those listed below, to provide protection
that meets the specific service requirement.

Note:
The use of a grounding system to guard against ESD damage is desirable but not
necessary.
– Attach the ESD ground clip to any frame ground, ground braid, or greenwire ground.
– When working on a double-insulated or battery-operated system, use an
ESD common ground or reference point. You can use coax or connectoroutside shells on these systems.
– Use the round ground prong of the ac plug on ac-operated computers.

Grounding requirements
Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by a
certified electrician.

Safety information

Safety notices: multilingual translations
The safety notices in this section are provided in English, French, German,
Hebrew, Italian, Japanese, and Spanish.

Safety notice 1
Before the computer is powered on after FRU replacement, make sure all screws,
springs, and other small parts are in place and are not left loose inside the
computer. Verify this by shaking the computer and listening for rattling sounds.
Metallic parts or metal flakes can cause electrical shorts.
Avant de remettre l’ordinateur sous tension après remplacement d’une unité en
clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et
bien fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect
ne se produit. Des pièces métalliques ou des copeaux de métal pourraient causer
un court-circuit.
Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird,
muß sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile
fehlen oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf
Klappergeräusche geprüft werden. Metallteile oder-splitter können Kurzschlüsse
erzeugen.

Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una
FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni
siano nella corretta posizione e non siano sparse all’interno dell’elaboratore.
Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori;
eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi.

Antes de encender el sistema despues de sustituir una FRU, compruebe que
todos los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio
y no se encuentran sueltas dentro del sistema. Compruébelo agitando el sistema
y escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden
causar cortocircuitos eléctricos.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Safety notice 2
DANGER
Some standby batteries contain a small amount of nickel and cadmium. Do not
disassemble a standby battery, recharge it, throw it into fire or water, or shortcircuit it. Dispose of the battery as required by local ordinances or regulations.
Use only the battery in the appropriate parts listing. Use of an incorrect battery can
result in ignition or explosion of the battery.
Certaines batteries de secours contiennent du nickel et du cadmium. Ne les
démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne
les mettez pas en court-circuit. Pour les mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle
de l’horloge temps réel, veillez à n’utiliser que les modèles cités dans la liste de
pièces détachées adéquate. Une batterie ou une pile inappropriée risque de prendre
feu ou d’exploser.
Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet,
kann geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden,
der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu
Entzündung oder Explosion führen.

Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio.
Non smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle.
Smaltirle secondo la normativa in vigore (DPR 915/82, successive disposizioni e
disposizioni locali). Quando si sostituisce la batteria dell’RTC (real time clock) o
la batteria di supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo
parti. L’impiego di una batteria non adatta potrebbe determinare l’incendio o
l’esplosione della batteria stessa.

Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio.
No las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite.
Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se
encuentren en la lista de piezas. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.

Safety information

Safety notice 3
DANGER
The battery pack contains small amounts of nickel. Do not disassemble it, throw
it into fire or water, or short-circuit it. Dispose of the battery pack as required by
local ordinances or regulations. Use only the battery in the appropriate parts listing
when replacing the battery pack. Use of an incorrect battery can result in ignition
or explosion of the battery.
La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser
que les modèles cités dans la liste de pièces détachées adéquate. En effet, une
batterie inappropriée risque de prendre feu ou d’exploser.
Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden.
Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste
aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion
führen.

La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco
o nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). Quando si sostituisce la
batteria, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego
di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della
batteria stessa.

Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni
recargue, ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como
dispone la normativa local. Utilice sólo baterías que se encuentren en la lista de
piezas al sustituir la batería. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Safety notice 4
DANGER
The lithium battery can cause a fire, an explosion, or a severe burn. Do not
recharge it, remove its polarized connector, disassemble it, heat it above 100°C
(212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as
required by local ordinances or regulations. Use only the battery in the appropriate
parts listing. Use of an incorrect battery can result in ignition or explosion of the
battery.
La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie,
d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son
connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature
supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau.
Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile
inappropriée risque de prendre feu ou d’exploser.
Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren
oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht
aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr
Inhalt nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung
angebrachte Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen
Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien
des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher
Batterien kann zu Entzündung oder Explosion führen.

La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o
procurare gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato,
smontarla, riscaldarla ad una temperatura superiore ai 100 gradi centigradi,
incendiarla o gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR
915/82, successive disposizioni e disposizioni locali). L’impiego di una batteria
non adatta potrebbe determinare l’incendio o l’esplosione della batteria stessa.

La batería de repuesto es una batería de litio y puede provocar incendios,
explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado,
ni la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni
exponga el contenido de sus celdas al agua. Deséchela tal como dispone la
normativa local.

Safety information

Safety notice 5
If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your
hands, immediately wash the affected areas with water at least for 15 minutes.
Seek medical care if any symptoms caused by the fluid are present after washing.
Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les
yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au
moins quinze minutes. Consultez un médecin si des symptômes persistent après le
lavage.
Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung
die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm
besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird
oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und
die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten
die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei
Beschwerden anschließend ein Arzt aufgesucht werden.

Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto
entrasse in contatto con gli occhi o le mani, lavare immediatamente le parti
interessate con acqua corrente per almeno 15 minuti; poi consultare un medico se i
sintomi dovessero permanere.

Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus
manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos
como mínimo. Obtenga atención medica si se presenta algún síntoma del fluido
despues de lavarse.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Safety notice 6
DANGER
To avoid shock, do not remove the plastic cover that protects the lower part of the
inverter card.
Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique
protégeant la partie inférieure de la carte d’alimentation.
Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der
Spannungswandlerplatine umgibt, nicht entfernen.
Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la
parte inferiore della scheda invertitore.

Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la
tarjeta invertida.

Safety notice 7
DANGER
Though the main batteries have low voltage, a shorted or grounded battery can
produce enough current to burn personnel or combustible materials.
Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la
mise à la masse d’une batterie peut produire suffisamment de courant pour brûler
des matériaux combustibles ou causer des brûlures corporelles graves.
Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei
Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu
entzünden oder Verletzungen bei Personen hervorzurufen.

Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in
corto circuito o a massa può fornire corrente sufficiente da bruciare materiali
combustibili o provocare ustioni ai tecnici di manutenzione.

Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada
o con contacto a tierra puede producir la corriente suficiente como para quemar
material combustible o provocar quemaduras en el personal.

Safety information

Safety notice 8
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any interconnecting
cables.
Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension,
débranchez tous les cordons d’alimentation des socles de prise de courant, retirez
la batterie et déconnectez tous les cordons d’interface.
Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen,
der Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU
entfernt wird.

Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese
elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi
di interconnessione.

Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de
las tomas de corriente eléctrica, quite la batería y, a continuación, desconecte
cualquier cable de conexión entre dispositivos.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Laser compliance statement
Some models of Lenovo computer are equipped from the factory with an
optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such
devices are also sold separately as options. If one of these drives is installed,
it is certified in the U.S. to conform to the requirements of the Department of
Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR)
Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to
conform to the requirements of the International Electrotechnical Commission
(IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note
the following:

CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles
aqui especificados pode resultar em perigosa exposição à radiação.
Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de
réglage et d’utilisation des commandes, ainsi que les procédures décrites.
Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet, kann
gefährliche Laserstrahlung auftreten.
L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle
specificate possono provocare l’esposizione a.

El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí
especificados puede provocar la exposición a radiaciones peligrosas.
Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage
device could result in exposure to hazardous laser radiation. There are no
serviceable parts inside those drives. Do not open.

Safety information

A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may
contain an embedded Class 3A or Class 3B laser diode. Note the following:

DANGER
Emits visible and invisible laser radiation when open. Do not stare into the beam,
do not view directly with optical instruments, and avoid direct exposure to the
beam.
Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe
diretamente por meio de instrumentos óticos e evite exposição direta com o feixe
de luz.
Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder
directement avec des instruments optiques, ou de vous exposer au rayon.
Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente
in den Laserstrahl sehen und den Strahlungsbereich meiden.
Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai
eszközökkel. Kerülje a sugárnyalábbal való érintkezést!
Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non
guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio.

Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el
haz de luz. Evite la exposición directa al haz.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Important service information
This chapter presents the following important service information:
• “Strategy for replacing FRUs” on page 16
– “Strategy for replacing a hard disk drive” on page 17
– “Important notice for replacing a system board” on page 17
• “Important information about replacing RoHS compliant FRUs” on page 18

Important:
BIOS and device driver fixes are customer-installable. The BIOS and device drivers
are posted on the customer support site:
http://support.lenovo.com.

Strategy for replacing FRUs
Before replacing parts:
Make sure that all software fixes, drivers, and BIOS downloads are installed
before replacing any FRUs listed in this manual.
After a system board is replaced, ensure that the latest BIOS is loaded to the
system board before completing the service action.
To download software fixes, drivers, and BIOS, follow the steps below:
1. Go to http://support.lenovo.com.
2. Enter the serial number or select a product or use Lenovo smart
downloading.
3. Select the BIOS/Driver/Applications and download.
4. Follow the directions on the screen and install the necessary software.

Important service information

Use the following strategy to prevent unnecessary expense for replacing and
servicing FRUs:
• If you are instructed to replace an FRU, but the replacement does not solve
the problem, reinstall the original FRU before you continue.
• Some computers have both a processor board and a system board. If you
are instructed to replace either of them, and replacing one of them does not
solve the problem, reinstall that board, and then replace the other one.
• If an adapter or a device consists of more than one FRU, any of the FRUs
may be the cause of the error. Before replacing the adapter or device,
remove the FRUs one by one to see if the symptoms change. Replace only
the FRU that changed the symptoms.
Attention: The setup configuration on the computer you are servicing may
have been customized. Running Automatic Configuration may alter the settings.
Note the current configuration settings (using the View Configuration option);
then, when service has been completed, verify that those settings remain in
effect.

Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This
will cause all customer data on the hard disk to be lost. Make sure that the
customer has a current backup of the data before performing this action.
Attention: The drive startup sequence in the computer you are servicing may
have been changed. Be extremely careful during write operations such as
copying, saving, or formatting. If you select an incorrect drive, data or programs
can be overwritten.

Important notice for replacing a system board
Some components mounted on a system board are very sensitive. Improper
handling can cause damage to those components, and may cause a system
malfunction.
Attention: When handling a system board:
• Do not drop the system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending the system board and hard pushing to prevent cracking at
each BGA (Ball Grid Array) chipset.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Important information about replacing RoHS compliant FRUs
RoHS, The Restriction of Hazardous Substances in Electrical and
Electronic Equipment Directive (2002/95/EC) is a European Union legal
requirement affecting the global electronics industry. RoHS requirements
must be implemented on Lenovo products placed on the market after
June 2006. Products on the market before June 2006 are not required to
have RoHS compliant parts. If the original FRU parts are non-compliant,
replacement parts can also be non-compliant. In all cases if the original
FRU parts are RoHS compliant, the replacement part must also be RoHS
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function
are identified with unique FRU part numbers.
Lenovo plans to transit to RoHS compliance well before the implementation
date and expects its suppliers to be ready to support Lenovo’s requirements
and schedule in the EU. Products sold in 2005 and 2006 will contain some
RoHS compliant FRUs. The following statement pertains to these products and
any product Lenovo produces containing RoHS compliant FRUs.
RoHS compliant FRUs have unique FRU part numbers. Before or after the
RoHS implementation date, failed RoHS compliant parts must always be
replaced with RoHS compliant ones, so only the FRUs identified as compliant
in the system HMM or direct substitutions for those FRUs may be used.
Products marketed before June 2006

Products marketed after June 2006

Current or
original part

Replacement FRU Current or
original part

Non-RoHS

Can be Non-RoHS

Non-RoHS

Can be RoHS

Non-RoHS

Can sub to RoHS

RoHS

Must be RoHS

Replacement FRU

Must be RoHS

Note: A direct substitution is a part with a different FRU part number that is
automatically shipped by the distribution center at the time of the order.

General checkout

General checkout
This chapter presents the following information:
• “What to do first” on page 20
• “Power system checkout” on page 21
Before you go to the checkout, make sure to read the following important notes:

Important notes:
• Only certified trained personnel can service the computer.
• Before replacing any FRU, read the entire page on removing and replacing
FRUs.
• Carefully remove screws for reuse when replacing FRUs.
• Be extremely careful during such write operations as copying, saving, or
formatting. Drives in the computer that you are servicing sequence might
have been altered. If you select an incorrect drive, data or programs might be
overwritten.
• Replace an FRU only with another FRU of the correct model. When you
replace an FRU, make sure that the machine model and the FRU part number are
correct by referring to the FRU parts list.
• An FRU should not be replaced just because of a single, unreproducible failure.
Single failures can occur for a variety of reasons that have nothing to do with a
hardware defect, such as cosmic radiation, electrostatic discharge, or software
errors. Consider replacing an FRU only when a problem recurs. If you suspect that
an FRU is defective, clear the error logs and run the test again. If the error does
not recur, do not replace the FRU.
• Be careful not to replace a nondefective FRU.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

What to do first
When you do return an FRU, you must include the following information in the
parts exchange form or parts return form that you attach to it:
1. Name and phone number of servicer
2. Date of service
3. Date on which the machine failed
4. Date of purchase
5. Procedure index and page number in which the failing FRU was detected
6. Failing FRU name and part number
7. Machine type, model number, and serial number
8. Customer’s name and address
Note for warranty: During the warranty period, the customer may be
responsible for repair costs if the computer damage was caused by misuse,
accident, modification, unsuitable physical or operating environment, or
improper maintenance by the customer.
The following is a list of some common items that are not covered under
warranty and some symptoms that might indicate that the system was
subjected to stress beyond normal use.
Before checking problems with the computer, determine whether the damage is
covered under the warranty by referring to the following list:
The following are not covered under warranty:
• LCD panel cracked from the application of excessive force or from being
dropped
• Scratched (cosmetic) parts
• Distortion, deformation, or discoloration of the cosmetic parts
• Plastic parts, latches, pins, or connectors that have been cracked or broken
by excessive force
• Damage caused by liquid spilled into the system
• Damage caused by the improper insertion of a PC Card or the installation of
an incompatible card
• Improper disc insertion or use of an optical drive
• Diskette drive damage caused by pressure on the diskette drive cover,
foreign material in the drive, or the insertion of a diskette with multiple labels
• Damaged or bent diskette eject button
• Fuses blown by attachment of a nonsupported device
• Forgotten computer password (making the computer unusable)
• Sticky keys caused by spilling a liquid onto the keyboard
• Use of an incorrect AC adapter on laptop products
The following symptoms might indicate damage caused by nonwarranted
activities:
• Missing parts might be a symptom of unauthorized service or modification.
• If the spindle of a hard disk drive becomes noisy, it may have been subjected
to excessive force, or dropped.

General checkout

Power system checkout
To verify a symptom, follow the steps below:
1. Turn off the computer.
2. Connect the AC adapter.
3. Make sure that power is supplied when you turn on the computer.
4. Turn off the computer.
5. Disconnect the AC adapter.
6. Make sure that the battery pack supplies power when you turn on the
computer.
If you suspect a power problem, see the appropriate one of the following power
supply checkouts:
• “Checking the AC adapter” on page 21
• “Checking operational charging” on page 21

Checking the AC adapter
You are here because the computer fails only when the AC adapter is used.
• If the power-on indicator does not turn on, check the power cord of the AC
adapter for correct continuity and installation.
• If the computer does not charge during operation, go to “Checking
operational charging”.
To check the AC adapter, follow the steps below:
1. Unplug the AC adapter cable from the computer.
2. Measure the output voltage at the plug of the AC adapter cable. See the
following figure:

Voltage (V DC)

+20

Note: Output voltage for the AC adapter pin No. 2 may differ from the one you
are servicing.
3. If the voltage is not correct, replace the AC adapter.
4. If the voltage is acceptable, do the following:
• Replace the system board.
• If the problem persists, go to “Lenovo Z410/Z510/Z510 Touch” on page 26.
Note: Noise from the AC adapter does not always indicate a defect.

Checking operational charging

To check whether the battery charges properly during operation, use a
discharged battery pack or a battery pack that has less than 50% of the total
power remaining when installed in the computer.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Perform operational charging. If the battery status indicator or icon does not
light on, remove the battery pack and let it return to room temperature. Reinstall
the battery pack. If the charge indicator or icon is still off, replace the battery
pack.
If the charge indicator still does not light on, replace the system board. Then
reinstall the battery pack.

Related service information

Related service information
This chapter presents the following information:
• “Restoring the factory contents by using OneKey Recovery” on page 23
• “Passwords” on page 24
• “Power management” on page 25

Restoring the factory contents by using OneKey Recovery
Restore of factory default
The Lenovo Z410/Z510/Z510 Touch computers come with pre-installed OneKey
Recovery System.In order to save application files and the initial backed up
files of the system, the hard disk in a Lenovo computer includes a hidden
partition when it is shipped. If you need to restore the system to the point of
your first boot up, just enter Lenovo OneKey Recovery System and run System
Recovery. For details of OneKey Recovery System, see the User Guide for
Lenovo OneKey Recovery system.
Note: This will delete all the new data on the system partition (C drive), which
is not recoverable. Make sure to back up your critical data before you perform this
action.
When you use the recovery discs to boot your computer, the system will enter
the user interface for system recovery automatically. Please follow the prompt
to insert the backup discs to complete the whole recovery process.

Note: The recovery process might take up to 2 hours.

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Passwords
As many as three passwords may be needed for any Lenovo computer: the
power-on password (POP) , Hard-disk password, and the supervisor password
(SVP).
If any of these passwords has been set, a prompt for it appears on the screen
whenever the computer is turned on. The computer does not start until the
password is entered.

Power-on password
A power-on password (POP) protects the system from being powered on by
an unauthorized person. The password must be entered before an operating
system can be booted.

Hard-disk password
There are two hard-disk passwords (HDPs):
+ User HDP - for the user
+ Master HDP - for the system administrator, who can use it to get access to
the hard disk drive even if the user has changed the user HDP
Attention: If the user HDP has been forgotten, check whether a master HDP
has been set. If it has, it can be used for access to the hard disk drive. If
no master HDP is available, neither Lenovo nor Lenov authorized service
technicians provide any services to reset either the user or the master HDP, or
to recover data from the hard disk drive. The hard disk drive can be replaced
for a scheduled fee.

Administrator password
If the Administrator password has been forgotten and cannot be made available
to the servicer, there is no service procedure to reset the password. The system
board must be replaced for a scheduled fee.

Related service information

Power management
Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has two power management
modes: screen blank and sleep (standby).

Screen blank mode
If the time set on the “Turn off monitor” timer in the operating system expires,
the LCD backlight turns off.
To end screen blank mode and resume normal operation, press any key.

Sleep (standby) mode
When the computer enters sleep (standby) mode, the following events occur in
addition to what occurs in screen blank mode:
• The LCD is powered off.
• The hard disk drive is powered off.
• The CPU stops.
To enter sleep (standby) mode, To put the computer to sleep, do one of the
following:
• Close the display panel.
• Press the power button.
• Open the Charms and then select Settings → Power → Sleep.
Attention: Wait until the power indicator light starts blinking (indicating that
the computer is in sleep mode) before you move your computer. Moving your
computer while the hard disk is spinning can damage the hard disk, causing
loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the power button.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Lenovo Z410/Z510/Z510 Touch
This chapter presents the following product-specific service references and
product-specific parts information:
• “Specifications” on page 26
• “Status indicators” on page 28
• “Function key combinations” on page 30
• “FRU replacement notices” on page 31
• “Removing and replacing an FRU” on page 32
• “Locations” on page 81
• “Parts list” on page 84

Specifications
The following table lists the specifications of the Lenovo Z410/Z510/Z510
Touch:
Table 1. Specifications
Feature

Description

Processor

• View the system properties of your computer.
You can do this as follows: Open the Control Panel, and then
select System and Security → System.
• Intel Panther Point HM86
• GPU: PCIe 3.0, 8 GT/s
• WLAN: PCIe 2.0, 5 GT/s
• RAM: DDR3L, 1600 MT/s
• DMI x 4, 5 GT/s
• FDI x 2, 2.7 Gb/s
• LCD: eDP 1.2, 5.4 GT/s
• HDMI Port: HDMI 1.4, 1.65 GT/s
• HDD: SATA 3.0, 6 Gb/s
• ODD: SATA 1.0, 1.5 Gb/s
• USB Port: USB 3.0, 5 Gb/s
• USB 2.0, 480 Mb/s
• BT: USB2.0, 480 Mb/s
• Card Reader: SD3.0, 50 Mb/s
• VGA
• SMBus 2.0
• LPC 1.1
• HDA
• SPI
• Nvidia N14P-GV2
• Intel HD Graphics 4600
• 14" 16:9, 1366 × 768 pixels HD WXGA/200 nits, 1600x900
HD+/250 nits(option) (Z410)
• 15.6" 16:9, 1366 × 768 pixels WXGA/200 nits, FHD
1920x1080 pixels (Z510/Z510 Touch)

Core Chipset
Bus architecture

Graphic memory
chip
Display

Lenovo Z410/Z510/Z510 Touch

Table 1. Specifications (continued)
Feature
Standard
memory
CMOS RAM
Hard disk drive
Optical drive
I/O port

Audio
Ethernet (on the
system board)
PCI Express
Mini Card slot
Bluetooth
wireless
Keyboard
Touch pad
Integrated
camera
Battery
AC adapter
Pre-installed
operating
system

Description
• DDR3-1600/1333MHz SODIMM × 2 (max 16 GB)
• 256 Byte
• 2.5-inch, 7 mm/9.5 mm SATA
• 500 GB / 750 GB / 1TB 5400 rpm /8GB + 500 GB SSHD/8GB
+ 1 TB SSHD
• 2.5" Internal 9.5mm, Rambo, blue-ray Rambo (option)
• Combo audio jack × 1
• RJ45 × 1
• HDMI port × 1
• USB 2.0 port × 1, USB 3.0 port × 2
• 2 in 1 slot × 1 (SD/MMC)
• 1/8" Combo audio jack
• 2 × 1.5 W speakers
• 10/100M
• 1 slot
• Combo w/ Wifi, BT 4.0 option
•
•
•
•
•
•

6 Row, ISO Full Size Keyboard
Multi-touch type
0.3 M/1.0 M (HD) pixels (Z410/Z510)
1.0 M (HD) pixels (Z510 Touch)
4 cell, 41.6 Wh or 48 Wh
20 V, 65 W or 90 W

• Win8

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Status indicators
The system status indicators below show the computer status:

Z410

Lenovo Z410/Z510/Z510 Touch

Z510/Z510 Touch

Table 2. Status indicators
Indicator

1
Power

Indicator
status
On (solid white)
Blinking
Off

Charge
Status
-------

Meaning
The computer is powered on.
The computer is in sleep mode.
The computer is powered off.

Charging
The battery has more than 80% charge.
Discharging The battery has more than 20% charge.
On (solid
The battery has between 5% and 20%
Discharging
amber)
charge.
The battery has between 20% and
80% charge. When the battery reaches
Blinking slowly
Charging
80% charge, the light will stop blinking.
(white)
However, charging will continue until the
battery is fully charged.
The battery has less than 20% charge.
Blinking slowly
Charging
When battery charge reaches 20%, the
(amber)
blinking color will change to white.
Blinking quickly Charging/
The battery has less than 5% charge.
(amber)
Discharging
On (solid white)

2
Battery

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Function key combinations
The following table shows the function of each combination of function key.
Table 3. Fn key combinations
Key combination

Description

Fn + PgUp:
Fn + PgDn:
Fn + Home:
Fn + End:
Fn + Space (on select models):

Enables/disables the scroll lock.
Activates the system request.
Activates the pause function.
Activates the break function.
Enables/disables the keyboard backlight.

Table 4. Hotkeys
:

Mutes/unmutes the sound.

Decreases the volume level.

Increases the volume level.

Closes the currently active window.

Refreshes the desktop or the currently active window.

Enables/disables the touchpad.

Enables/disables Airplane mode.

Displays all currently active apps.

Turns on/off the backlight of the LCD screen.

Toggles the display between the computer and an external
device.

Decreases display brightness.

Increases display brightness.

Lenovo Z410/Z510/Z510 Touch

FRU replacement notices
This section presents notices related to removing and replacing parts. Read
this section carefully before replacing any FRU.

Screw notices
Loose screws can cause a reliability problem. In the Lenovo computer, this
problem is addressed with special nylon-coated screws that have the following
characteristics:
• They maintain tight connections.
• They do not easily come loose, even with shock or vibration.
• They are harder to tighten.
• Carefully remove screws for reuse when replacing FRUs.
Do the following when you service this machine:
• Keep the screw kit in your tool bag.
• Use a torque screwdriver if you have one.
Tighten screws as follows:
• Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the
plastic part:
more than 90°

(Cross-section)

• Logic card to plastic
Turn an additional 180° after the screw head touches the surface of the
logic card:
more than 180°

(Cross-section)

• Torque driver
If you have a torque screwdriver , refer to the “Torque” column for each step.
• Make sure that you use the correct screws. If you have a torque screwdriver,
tighten all screws firmly to the torque shown in the table. Carefully remove
screws for reuse when replacing FRUs. Make sure that all screws are
tightened firmly.
• Ensure torque screwdrivers are calibrated correctly following country
specifications.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Removing and replacing an FRU
This section presents exploded figures with the instructions to indicate how to
remove and replace the FRU. Make sure to observe the following general rules:
1. Do not attempt to service any computer unless you have been trained and
certified. An untrained person runs the risk of damaging parts.
2. Before replacing any FRU, review “FRU replacement notices” on page 31.
3. Begin by removing any FRUs that have to be removed before the failing
FRU. Any of such FRUs are listed at the top of the page. Remove them in
the order in which they are listed.
4. Follow the correct sequence in the steps to remove the FRU, as given in the
figures by the numbers in square callouts.
5. When turning a screw to replace an FRU, turn it in the direction as given by
the arrow in the figure.
6. When removing the FRU, move it in the direction as given by the arrow in
the figure.
7. To put the new FRU in place, reverse the removal procedures and follow
any of the notes that pertain to replacement. For information about
connecting and arranging internal cables, see “Locations” on page 81.
8. When replacing an FRU, use the correct screw as shown in the procedures.

DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, and then disconnect any of the interconnecting cables.
Attention: After replacing an FRU, do not turn on the computer until you have
made sure that all screws, springs, and other small parts are in place and none
are loose inside the computer. Verify this by shaking the computer gently and
listening for rattling sounds. Metallic parts or metal flakes can cause electrical
short circuits.
Attention: The system board is sensitive to, and can be damaged by,
electrostatic discharge. Before touching it, establish personal grounding by
touching a ground point with one hand or using an electrostatic discharge (ESD)
strap (P/N 6405959) to remove potential shock reasons.

Lenovo Z410/Z510/Z510 Touch

1010 Keyboard
Figure 1. Removal steps of keyboard
Remove the screws 1.

Z410
1
1

Z510/Z510 Touch
1
1

Step

1
1

Screw (quantity)

Color

Torque

M2 × 12 mm, flat-head, nylok-coated (3) (Z410)
Logic Lower to K/B
M2 × 4.9 mm, flat-head, nylok-coated (3)
(Z510/Z510 Touch) Logic Lower to K/B

Black

1.85+/-0.15 kgf/cm

Black

1.85+/-0.15 kgf/cm

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 1. Removal steps of keyboard (continued)
Insert the screwdriver into one of the screw hole on the bottom
the keyboard out of the keyboard bezel 3.

2. Then pull

Lenovo Z410/Z510/Z510 Touch

Figure 1. Removal steps of keyboard (continued)
Lift the keyboard a little, and then detach the connectors in the direction shown
by arrows 4 5. Remove the keyboard in the direction shown by arrow 6.

Z410

4
5

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 1. Removal steps of keyboard (continued)

Z510/Z510 Touch

4
5

When installing: Make sure that the FPC connector is attached firmly.

Lenovo Z410/Z510/Z510 Touch

1020 Optical drive
For access, remove this FRU:
• “1010 Keyboard” on page 33
Figure 2. Removal steps of optical drive
Remove the screw 1.

Step

Screw (quantity)

Color

Torque

M2.5 × 6 mm, flat-head, nylok-coated (1)
Logic Upper to Logic Lower

Black

3.0+/-0.3 kgf/cm

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 2. Removal steps of Optical drive (continued)
Insert a screwdriver into the screw hole and push the optical drive in the
direction shown by arrow 2. Pull the optical drive out in the direction shown by
arrow 3.

Lenovo Z410/Z510/Z510 Touch

1030 Base cover
For access, remove this FRU:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
Figure 3. Removal steps of base cover

Z410
Remove the screws 1.

1
1

Step

Screw (quantity)

Color

Torque

M2.5 × 6 mm, flat-head, nylok-coated (4)
Logic Upper to Logic Lower

Black

3.0+/-0.3 kgf/cm

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 3. Removal steps of base cover (continued)
Remove the two rubber feet
bottom.

2. Remove the screws 3,4 and 5 from the
2

5
5

5
3

3
4

Step

3
4
5

Screw (quantity)

Color

Torque

M2.5 × 6 mm, flat-head, nylok-coated (2)
Rubber foot to Logic Upper
M2 × 4.9 mm, flat-head, nylok-coated (3)
Logic Lower to Logic Upper
M2 × 2.5 mm, flat-head, nylok-coated (3)
Logic Lower to Logic Upper

Black

3.0+/-0.3 kgf/cm

Black

1.85+/-0.15 kgf/cm

Black

1.85+/-0.15 kgf/cm

Remove the base cover in the direction shown by arrow 6.
6

Lenovo Z410/Z510/Z510 Touch

Figure 3. Removal steps of base cover (continued)

Z510/Z510 Touch
Remove the screws 1.

1
1

Step

Screw (quantity)

Color

Torque

M2.5 × 6 mm, flat-head, nylok-coated (5)
Logic Upper to Logic Lower

Black

3.0+/-0.3 kgf/cm

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 3. Removal steps of base cover (continued)
Open the four rubber feet
bottom.

2. Remove the screws 3, 4 and 5 from the
5

3
2

4
3

4
2

Step

3
4
5

Screw (quantity)

Color

Torque

M2.5 × 6 mm, flat-head, nylok-coated (4)
Rubber foot to Logic Upper
M2 × 4.9 mm, flat-head, nylok-coated (3)
Logic Lower to Logic Upper
M2 × 2.5 mm, flat-head, nylok-coated (3)
Logic Lower to Logic Upper

Black

3.0+/-0.3 kgf/cm

Black

1.85+/-0.15 kgf/cm

Black

1.85+/-0.15 kgf/cm

Remove the base cover in the direction shown by arrow 6.
6

Lenovo Z410/Z510/Z510 Touch

Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
label:
The following labels need to be peeled off from the old base cover, and need
to be put on the new base cover.
a
Rating label
b
Rating label
c
Rating label for China
d
Rating label for WW
e
Brazil BT label
f
Brazil WL label
g
BT label for US/CA/TW/INDONESIA
h
WL label for US/CA/TW/INDONESIA
i
SIRIM BT label
j
SIRIM WL label
k
Israel WL label
l
Indonesia D side label
m
KCC label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:

c
g

d
k

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1040 Battery pack
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39

DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
Figure 4. Removal steps of battery pack
Detach the battery pack connector in the direction shown by arrow
the screws 2.

1, remove

2
2

Step

Screw (quantity)

Color

Torque

M2.5 × 6 mm, flat-head, nylok-coated (2)
Logic Upper to Battery

black

3.0+/-0.3 kgf/cm

Lenovo Z410/Z510/Z510 Touch

Figure 4. Removal steps of battery pack (continued)
Remove the battery pack in the direction shown by arrow 3.
3

When installing: Make sure the battery pack connector is attached firmly.

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1050 Hard disk drive
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44

Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damages
and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on
it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Figure 5. Removal steps of hard disk drive
Remove the screws 1.
1
1
1
1

Step

Screw (quantity)

Color

M2.5 × 3 mm, flat-head, nylok-coated (4)
HDD to Logic Upper

Black

Torque
3.0+/-0.3 kgf/cm

Lenovo Z410/Z510/Z510 Touch

Figure 5. Removal steps of hard disk drive (continued)
Detach the HDD connector in the direction shown by arrow 2. Remove the
hard disk drive from the slot in the direction shown by arrow 3.

3
2

When installing: Make sure that the HDD connector is attached firmly.
Remove the screws 4, then take out the metal frame.
4
4
4
4

Step

Screw (quantity)

Color

M3 × 3 mm, flat-head, nylok-coated (4)
HDD_BRK to module

White

Torque
3.0+/-0.3 kgf/cm

When installing: Make sure that the HDD connector is attached firmly.

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1060 PCI Express Mini Card for wireless LAN
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
Figure 6. Removal steps of PCI Express Mini Card for wireless LAN
Disconnect the two wireless LAN cables (black, white) 1, and then remove the
screw 2.

2
1

In step 1, unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by arrows.
Notes: wireless LAN card has 2 cables in step 1.
wireless LAN card in some models may have 3 cables in step 1.
Step

Screw (quantity)

Color

Torque

M2 × 2.5 mm, flat-head, nylok-coated (1) WLAN
Card to MB

Black

1.85+/-0.15 kgf/cm

Lenovo Z410/Z510/Z510 Touch

Figure 6. Removal steps of PCI Express Mini Card for wireless LAN (continued)
Remove the card in the direction shown by arrow 3.

When installing:
• In models with a wireless LAN card that has two antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, and the white cable (2nd)
(AUX) into jack labeled 2 on the card.
• In models with a wireless LAN card that has three antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into
jack labeled 3, and the white cable (2nd) (AUX) into jack labeled 2 on the
card.

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1070 DIMM
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
Figure 7. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows 1, and then unplug the DIMM in the direction shown
by arrow 2.

1
2

When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.

Lenovo Z410/Z510/Z510 Touch

1080 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
Figure 8. Removal steps of fan assembly and heat sink assembly
Detach the fan connector in the direction shown by arrow
the screws 2 and remove the screw 3.

1 , and then loosen

Z410
2

Step

Screw (quantity)

Color

Torque

M2 × 3, flat-head, nylok-coated (1)
FAN to Logic Upper

Black

1.85+/-0.15 kgf/cm

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 8. Removal steps of fan assembly and heat sink assembly (continued)

Z510/Z510 Touch
2
2

Step

Screw (quantity)

Color

Torque

M2 × 3.2, flat-head, nylok-coated (1)
FAN to Logic Upper

Black

1.85+/-0.15 kgf/cm

When installing: Make sure that the fan connector is attached firmly to the
system board.

Lenovo Z410/Z510/Z510 Touch

Figure 8. Removal steps of fan assembly and heat sink assembly (continued)
Lift the fan assembly and heat sink assembly in the direction shown by arrow 4.
Be careful not to damage the connector.

Z410
4

Z510/Z510 Touch
4

Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1090 CPU
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1080 Fan assembly and Heat Sink assembly” on page 51
Attention: CPU is extremely sensitive. When you service the CPU, avoid any
kind of rough handling.
Figure 9. Removal steps of CPU
Rotate the head of the screw in the direction shown by arrow 1 to release the
lock, then remove the CPU in the direction shown by arrow 2.

1
a

When installing: Place the CPU on the CPU socket in the direction shown by
arrow a , and then rotate the head of the screw in the direction shown by arrow
b to secure the CPU.

Lenovo Z410/Z510/Z510 Touch

1100 ODD board and LED board (Z510/Z510 Touch)
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1080 Fan assembly and Heat Sink assembly” on page 51
Figure 10. Removal steps of ODD board and LED board (Z510/Z510 Touch)
Detach the two FPC connectors in the direction shown by arrows
Remove the screws 3 and 4.

1 2.

1
2
3
3
4
4

1
2

Step

3
4

Screw (quantity)

Color

Torque

M2 × 2.5, flat-head, nylok-coated (2)

Black

1.85+/-0.15 kgf/cm

M2 × 3, flat-head, nylok-coated (2)

Black

1.85+/-0.15 kgf/cm

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 10. Removal steps of ODD board and LED board (Z510/Z510 Touch)
(continued)
Remove the two boards in the direction shown by arrows 5.

When installing: Make sure that the two FPC connectors are attached firmly.

Lenovo Z410/Z510/Z510 Touch

1110 Speakers
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
Figure 11. Removal steps of speakers
Detach the speakers connector in the direction shown by arrow
the screws 2.

1. Remove

Z410
2
2

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 11. Removal steps of speakers (continued)

Z510/Z510 Touch
2
2

2
2

Step

Screw (quantity)

Color

Torque

M2 × 5.7+2, flat-head, nylok-coated (4)
Speaker to Logic Upper

Black

1.85+/-0.15 kgf/cm

Lenovo Z410/Z510/Z510 Touch

Figure 11. Removal steps of speakers (continued)
Remove the speakers 3.

Z410
3

Z510/Z510 Touch
3

When installing: Make sure that the speakers connector is attached firmly.

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1120 System board
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• In the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
• “1110 Speakers” on page 57
Figure 12. Removal steps of system board
Detach the three FPC connectors in the direction shown by arrows 1 2.

Z410

1
1
2
2

Lenovo Z410/Z510/Z510 Touch

Figure 12. Removal steps of system board (continued)

Z510/Z510 Touch

1
1
2
2

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 12. Removal steps of system board (continued)
Detach the connectors in the direction shown by arrows 3. Remove the screws
4, 5 and 6.

Z410

3
3

6
6
6

5
4

Z510

3
3

6
6
6

6
6

4 5

Lenovo Z410/Z510/Z510 Touch

Figure 12. Removal steps of system board (continued)

Z510 Touch

3
3

6
6

Step

4
4
5
5
6
6

Screw (quantity)

Color

Torque

M2.5 × 6 mm, flat-head, nylok-coated (1) (Z410)
RJ45 Cover to MB
M2.0 × 4.9 mm, flat-head, nylok-coated (1)
(Z510/Z510 Touch) RJ45 Cover to MB
M2.0 × 4.9 mm, flat-head, nylok-coated (1)
(Z410) RJ45 Cover to Logic Upper
M2.5 × 6 mm, flat-head, nylok-coated (1)
(Z510/Z510 Touch) RJ45 Cover to Logic Upper
M2.5 × 3 mm, flat-head, nylok-coated (4) (Z410)
MB to Logic Upper
M2.5 × 3 mm, flat-head, nylok-coated (5)
(Z510/Z510 Touch) MB to Logic Upper

Black

3.0+/-0.3 kgf/cm

Black

1.85+/-0.15 kgf/cm

Black

1.85+/-0.15 kgf/cm

Black

3.0+/-0.3 kgf/cm

Black

3.0+/-0.3 kgf/cm

Black

3.0+/-0.3 kgf/cm

When installing: Make sure that the connectors are attached firmly.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 12. Removal steps of system board (continued)
Remove the RJ-45 door in the direction shown by arrow
system board in the direction shown by arrow 8.

7
8

7 . Remove the

Lenovo Z410/Z510/Z510 Touch

1130 LCD unit
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1070 DIMM” on page 50
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
• “1110 Speakers” on page 57
• “1120 System board” on page 60
Figure 13. Removal steps of LCD unit

Z410
Remove the screws 1 and 1’.
1
1 ’

1
1

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 13. Removal steps of LCD unit (continued)

Z510/Z510 Touch
Remove the screws 1.
1
1

1
1

Step

1
1
1’

Screw (quantity)

Color

M2.5 × 6 mm, flat-head, nylok-coated (5) (Z410)
LCD Ass'y to Logic Upper
M2.5 × 6 mm, flat-head, nylok-coated (6)
(Z510/Z510 Touch) LCD Ass'y to Logic Upper
M2 × 2 mm, flat-head, nylok-coated (1) (Z410)
LCD Ass'y to Logic Upper

Black

3.0+/-0.3 kgf/cm

Torque

Black

3.0+/-0.3 kgf/cm

Black

1.85+/-0.15 kgf/cm

Lenovo Z410/Z510/Z510 Touch

Figure 13. Removal steps of LCD unit (continued)
Release the LCD cable from the cable guides in the direction shown by arrows
2. Then lift the LCD hinge in the direction shown by arrow 3.
3
2
2

When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
Remove the keyboard bezel from the LCD unit in the direction shown by arrows 5.
4

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1140 Keyboard bezel
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1070 DIMM” on page 50
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
• “1110 Speakers” on page 57
• “1120 System board” on page 60
• “1130 LCD unit” on page 65
Figure 14. Removal steps of keyboard bezel
Remove the screws 1.
1

Step

Screw (quantity)

Color

Torque

M2.5 × 3 mm, flat-head, nylok-coated (2)
USB Board to Logic Upper

Black

3.0+/-0.3 kgf/cm

Lenovo Z410/Z510/Z510 Touch

Figure 14. Removal steps of keyboard bezel (continued)

Remove the power board, USB board and DC-in jack in the direction shown by
arrows 2.
2

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1150 LCD front bezel/LCD hinge cover
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1070 DIMM” on page 50
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
• “1110 Speakers” on page 57
• “1120 System board” on page 60
• “1130 LCD unit” on page 65
• “1140 Keyboard bezel” on page 68
Figure 15. Removal steps of LCD front bezel/LCD hinge cover

Z410/Z510
Remove the LCD front bezel in the direction shown by arrows 1.

1
1

Lenovo Z410/Z510/Z510 Touch

Figure 15. Removal steps of LCD front bezel/LCD hinge cover (continued)

Z510 Touch
Remove the LCD front bezel in the direction shown by arrows 1.
1

Z410/Z510/Z510 Touch Hardware Maintenance Manual
1160 LCD panel/LCD module
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1070 DIMM” on page 50
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
• “1110 Speakers” on page 57
• “1120 System board” on page 60
• “1130 LCD unit” on page 65
• “1140 Keyboard bezel” on page 68
• “1150 LCD front bezel/LCD hinge cover” on page 70
Figure 16. Removal steps of LCD panel/LCD module

Z410/Z510
Remove the screws 1.
1

1
1

Step

Screw (quantity)

Color

Torque

M2 × 2.5 mm, flat-head, nylok-coated (4)
LCD_PANEL to LCD COVER

Black

1.85+/-0.15 kgf/cm

Lenovo Z410/Z510/Z510 Touch

Figure 16. Removal steps of LCD panel/LCD module (continued)
Lift the LCD panel a little 2 . Peel off the adhesive tape and detach the
connector in the direction shown by arrow 3.
2

When installing: Make sure that the metal connector is attached firmly.
Remove the LCD panel 4.
4

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 16. Removal steps of LCD panel/LCD module (continued)

Z510 Touch
Remove the screws 1 and 2, then remove the LCDl module 3.
3

2
1

2
2
2
2

1
1

Step

1
2

Screw (quantity)

Color

Torque

M2 × 2.5 mm, flat-head, nylok-coated (4)
LCD_PANEL to LCD COVER
M2.5 × 5 mm, flat-head, nylok-coated (5)
LCD_PANEL to LCD COVER

White

1.85+/-0.15 kgf/cm

Black

3.0+/-0.3 kgf/cm

Lenovo Z410/Z510/Z510 Touch

1170 LCD Hinges
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1070 DIMM” on page 50
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
• “1110 Speakers” on page 57
• “1120 System board” on page 60
• “1130 LCD unit” on page 65
• “1140 Keyboard bezel” on page 68
• “1150 LCD front bezel/LCD hinge cover” on page 70
• “1160 LCD panel/LCD module” on page 72
Figure 17. Removal steps of LCD hinges

Z410
Remove the screws
shown by arrows 3.

1 and 2. Then release the two hinges in the direction
1

3
1

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 17. Removal steps of LCD hinges (continued)

Z510
Remove the screws
arrows 3.

2. Then release the two hinges in the direction shown by
2

2
2

3
2
2

Z510 Touch
Remove the screws
arrows 3.

2. Then release the two hinges in the direction shown by

2
3

Step

1
2
2
2

Screw (quantity)
M2 × 2.5 mm, flat-head, nylok-coated (2) (Z410)
Hinge L/R to LCD Cover
M2.5 × 3 mm, flat-head, nylok-coated (6) (Z410)
Hinge L/R to LCD Cover
M2 × 3 mm, flat-head, nylok-coated (10) (Z510)
Hinge L/R to LCD Cover
M2.5 × 3 mm, flat-head, nylok-coated (2)
(Z510 Touch) Hinge L/R to LCD Cover

Color

Torque

Black

1.85+/-0.15 kgf/cm

Black

3.0+/-0.3 kgf/cm

Black

1.85+/-0.15 kgf/cm

White

3.0+/-0.3 kgf/cm

Lenovo Z410/Z510/Z510 Touch

1180 Integrated camera, LCD cable and antenna assembly
For access, remove these FRUs in order:
• “1010 Keyboard” on page 33
• “1020 Optical drive” on page 37
• “1030 Base cover” on page 39
• “1040 Battery pack” on page 44
• “1050 Hard disk drive” on page 46
• “1060 PCI Express Mini Card for wireless LAN” on page 48
• “1070 DIMM” on page 50
• “1080 Fan assembly and Heat Sink assembly” on page 51
• “1100 ODD board and LED board (Z510/Z510 Touch)” on page 55
• “1110 Speakers” on page 57
• “1120 System board” on page 60
• “1130 LCD unit” on page 65
• “1140 Keyboard bezel” on page 68
• “1150 LCD front bezel/LCD hinge cover” on page 70
• “1160 LCD panel/LCD module” on page 72
• “1170 LCD Hinges” on page 75
Figure 18. Removal steps of integrated camera, LCD cable and antenna
assembly

Z410/Z510
Note: The integrated camera is stuck on the top center of the LCD cover.
Detach the integrated camera connector in the direction shown by arow 1.

When installing: Stick the integrated camera to the top center of the LCD
cover and ajust the placement of it to make sure the connector is attached
firmly.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 18. Removal steps of integrated camera, LCD cable and antenna
assembly (continued)
Remove the camera in the direction shown by arrow 2.
2

Remove the LCD cable and antenna assembly in the direction shown by arrows 3.
3

Lenovo Z410/Z510/Z510 Touch

Figure 18. Removal steps of integrated camera, LCD cable and antenna
assembly (continued)

Z510 Touch
Remove the antenna assembly in the direction shown by arrow 1.

Detach the connectors in the direction shown by arows 2.

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Figure 18. Removal steps of integrated camera, LCD cable and antenna
assembly (continued)
Remove the camera cable and LCD cable in the direction shown by arrows 3.
3

Remove the camera in the direction shown by arrow 4.
4

Lenovo Z410/Z510/Z510 Touch

Locations
Front view and right-side view
Integrated camera
Built-in microphone
Wireless LAN antennas
Computer display
Power button
Touchpad
System status indicators
Note: For the description of each indicator, see “Status indicators” on page 28.
8 Combo audio jack
9 Memory card slot
J USB port
K Optical drive
L Kensington slot

1
2
3
4
5
6
7

Z410
2

1
3

7
11

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Z510/Z510 Touch
2
1

7
11

Lenovo Z410/Z510/Z510 Touch

Bottom and Left-side view
1
2
3
4
5
6
7
8

Speakers
USB port
HDMI port
RJ-45 port
VGA port
Fan louvers
Novo button
AC power adapter jack

Z410

Z510/Z510 Touch

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Parts list
This section presents the following service parts:
• “Overall” on page 85
• “LCD FRUs” on page 93
• “Keyboard” on page 98
• “Miscellaneous parts” on page 104
• “AC adapters” on page 105
• “Screws” on page 105
• “Power cords” on page 106

Notes:
• Each FRU is available for all types or models, unless specific types or models
are specified.

Lenovo Z410/Z510/Z510 Touch

Overall
Z410
1

2
3

f
4

6
7

e
9

8
g
11
12

b
i

10
c
13
14
15

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Z510/Z510 Touch
1

2
3

f
4
5
6
7

b
g
12

h
11

13
14
c

15
17

Lenovo Z410/Z510/Z510 Touch

Z410
Table 5. Parts list—Overall (Z410)
No. FRU

FRU no.

a-i
1
2
3
3
4

90203969
90203970
121500113

4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
6
6
7
8
8
8
9
9
9
9
9
10

See “Miscellaneous parts” on page 104.
LCD unit (see “LCD FRUs” on page 93.)
Keyboard (see “Keyboard” on page 98.)
AILZA Upper Case
AILZA Upper Case for Erazer
Battery, 4S1P, 4cell,48Wh, Sanyo, Z400Z500 SY
L12S4K01 14.4V48Wh 4cellbty
Battery, 4S1P, 4cell,48Wh, Simplo, Zx10 SP/S
L12M4F02 15V48Wh 4cellbty
Battery, 4S1P, 4cell, 41.6Wh, Sanyo, Zx0 SY
L12S4E21 14.4V41.6Wh 4cellbty
Battery, 4S1P, 4cell, 41.6Wh,Simplo, Zx0 SP/L
L12M4E21 14.8V41.6Wh 4cellbty
AILZA MB UMA 37W
AILZA MB UMA 47W
AILZA MB N14P-GV2 1G
AILZA MB N14P-GV2 2G
AILZA MB W8S UMA 37W
AILZA MB W8S UMA 47W
AILZA MB W8S N14P-GV2 1G
AILZA MB W8S N14P-GV2 2G
AILZA MB W8P UMA 37W
AILZA MB W8P UMA 47W
AILZA MB W8P N14P-GV2 1G
AILZA MB W8P N14P-GV2 2G
Processor, Intel Haswell platform 35w, Intel I74702MQ 2.2G 4cPGA CPU
Processor, Intel Haswell platform 35w, Intel I74700MQ 2.4G 4cPGA CPU
AILZA FAN
AILZA Thermal DIS 37W
AILZA Thermal UMA 37W
AILZA Thermal UMA 37W
ODD, 9.5 Rambo Tray-in, HLDS GU70N 9.5 Rambo
ODD
ODD, 9.5 Rambo Tray-in, PLDS DU-8A5SH 9.5
Rambo ODD
ODD, 9.5 Rambo Tray-in, PSN UJ8DB Slim Tray
Rambo w/o bezel
ODD, 9.5 HLDS BU10N 9.5 BD Rambo ODD
ODD, 9.5 Panasonic UJ262 9.5 BD Rambo ODD
AILZA USB&Audio Board

CRU ID.

121500202
121500121
121500123
90004453
90004454
90004455
90004456
90004457
90004458
90004459
90004460
90004461
90004462
90004463
90004464
102500541

102500540
90203964
90203961
90203962
90203963
25205807
25205806
25212030
25209260
25209259
90004452

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Table 5. Parts list—Overall (Z410) (continued)
No. FRU

FRU no.

11200502

11
11
11
11
11
11
11
11
11
11
11
11
12
12
12
12
12
12
13
13
13
13
13

RAM, DDR3 1600 2GB, Samsung, M471B5773DH0YK0 2GB DDR3L 1600
RAM, DDR3 1600 2GB, SK hynix, HMT425S6AFR6APB 2GB DDR3L 1600
RAM, DDR3 1600 2GB, Ramaxel,
RMT3170ED58F8W-1600
RAM, DDR3 1600 2GB, Micron, MT4KTF25664HZ1G6E1 2GB DDR3L 1600
RAM, DDR3L 1600 4GB, Samsung, M471B5173BH0YK0 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, SK hynix,
HMT451S6AFR8A-PB 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, Ramaxel,
RMT3170EB68F9W-1600 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, Sharetronic,
SM321NQ08ICF 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, Micron, MT8KTF51264HZ1G6J1 4GB DDR3L 1600
RAM, DDR3L 1600 8GB, Samsung, M471B1G73BH0YK0 8GB DDR3L 1600
RAM, DDR3L 1600 8GB, SK hynix,
HMT41GS6AFR8A-PB 8GB DDR3L 1600
RAM, DDR3L 1600 8GB, Sharetronic,
SM322NW08IAF 8GB DDR3L 1600
RAM, DDR3L 1600 8GB, Micron, MT16KTF1G64HZ1G6E1 8GB DDR3L 1600
WLAN, Intel 7260BN 2x2BN+BT PCIE HMC WLAN
WLAN, Cbt BCM94313HMG 1x1BGN HMC
WLAN, Liteon HB125 1x1BGN HMC
WLAN, Cbt BCM943142HM 1x1BGN+BT4.0 HMC
WLAN, Liteon WB225 1x1BGN+BT4.0 HMC
WLAN, Liteon WB335 1x1BGN+BT4.0 HMC
Hard disk drive, ST500LM012 6G 9.5mm 5.4K 500G
HDD
Hard disk drive, ST500LT012 6G 7mm 5.4K 500G
HDD
Hard disk drive, HTS545050A7E660 6G 7mm 5.4K
500G HDD
Hard disk drive, MQ01ABF050 6G 7mm 5.4K 500G
HDD
Hard disk drive, WD5000LPCX-24C6HT0 6G 7mm
5.4K 500G HDD

CRU ID.

11201299
11201835
11201967
11201966
11201300
11201512
11201834
11201342
11200504
11201301
11201514
11201304
20200412
20200102
20200223
20200222
20200224
20200437
16200387
16200383
16200404
16200433
16200395

Lenovo Z410/Z510/Z510 Touch

Table 5. Parts list—Overall (Z410) (continued)
No. FRU

FRU no.

16200385

13
13
13
13
13
14
15
15
—

Hard disk drive, ST1000LM024 6G 9.5mm 5.4K 1T
HDD
Hard disk drive, HTS541010A9E660 6G 9.5mm 5.4K
1T HDD
Hard disk drive, TSB MQ01ABD100 6G 9.5mm 5.4K
1T HDD
Hard disk drive, WD10JPCX-24UE4T0 6G 9.5mm
5.4K 1T HDD
Hard disk drive, ST1000LM014 6G 9.5mm 1T SSHD
Hard disk drive, ST500LM000 6G 7mm 500G SSHD
AILZA Speaker L+R
AILZA Lower Case Brown
AILZA Lower Case White
AC adapter (see “AC adapters” on page 105 ).

CRU ID.

16200400
16200429
16200393

16200389
16200391
90203976
90203977
90203978

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Z510/Z510 Touch
Table 6. Parts list—Overall (Z510/Z510 Touch)
No. FRU

FRU no.

a-h
1
2
3
3
4

90203995
90203996
121500113

4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
7
8
8

See “Miscellaneous parts” on page 104.
LCD unit (see “LCD FRUs” on page 93.)
Keyboard (see “Keyboard” on page 98.)
AILZB Upper Case
AILZB Upper Case for Erazer
Battery, 4S1P, 4cell, 48Wh, Sanyo, Z400Z500 SY
L12S4K01 14.4V48Wh 4cellbty
Battery, 4S1P, 4cell, 48Wh, Simplo, Zx10 SP/S
L12M4F02 15V48Wh 4cellbty
Battery, 4S1P, 4cell, 41.6Wh, Sanyo, Zx0 SY
L12S4E21 14.4V41.6Wh 4cellbty
Battery, 4S1P, 4cell, 41.6Wh, Simplo, Zx0 SP/L
L12M4E21 14.8V41.6Wh 4cellbty
AILZB MB UMA 37W
AILZB MB UMA 47W
AILZB MB N14P-GV2 1G
AILZB MB N14P-GV2 2G
AILZB MB W8S UMA 37W
AILZB MB W8S UMA 47W
AILZB MB W8S N14P-GV2 1G
AILZB MB W8S N14P-GV2 2G
AILZB MB W8P UMA 37W
AILZB MB W8P UMA 47W
AILZB MB W8P N14P-GV2 1G
AILZB MB W8P N14P-GV2 2G
AILZC MB UMA 37W
AILZC MB UMA 47W
AILZC MB DIS 1G
AILZC MB DIS 2G
AILZC MB W8S UMA 37W
AILZC MB W8S UMA 47W
AILZC MB W8S DIS 1G
AILZC MB W8S DIS 2G
AILZC MB W8P UMA 37W
AILZC MB W8P UMA 47W
AILZC MB W8P DIS 1G
AILZC MB W8P DIS 2G
Processor, Intel Haswell platform 35w, Intel I74702MQ 2.2G 4cPGA CPU
Processor, Intel Haswell platform 35w, Intel I74700MQ 2.4G 4cPGA CPU
AILZA FAN
AILZA Thermal DIS 37W
AILZA Thermal UMA 37W

CRU ID.

121500202
121500121
121500123
90004472
90004473
90004474
90004475
90004476
90004477
90004478
90004479
90004480
90004481
90004482
90004483
90004867
90004868
90004869
90004870
90004871
90004872
90004873
90004874
90004875
90004876
90004877
90004878
102500541
102500540
90203964
90203961
90203962

Lenovo Z410/Z510/Z510 Touch

Table 6. Parts list—Overall (Z510/Z510 Touch) (continued)
No. FRU

FRU no.

8
9

90203963
25205807

9
9
9
9
10
10
11
12
13
13
13
13
13
13
13
13
13
13
13
13
13
14
14
14

AILZA Thermal UMA 47W
ODD, 9.5 Rambo Tray-in, HLDS GU70N 9.5 Rambo
ODD
ODD, 9.5 Rambo Tray-in, PLDS DU-8A5SH 9.5
Rambo ODD
ODD, 9.5 Rambo Tray-in, PSN UJ8DB Slim Tray
Rambo w/o bezel
ODD, 9.5 Blueray Rambo, HLDS BU10N 9.5 BD
Rambo ODD
ODD, 9.5 Blueray Rambo, Panasonic UJ262 9.5 BD
Rambo ODD
AILZB ODD Board W/BL
AILZB ODD Board WO/BL
AILZB USB&Audio Board
AILZB LED Board
RAM, DDR3L 1600 2GB, Samsung, SS
M471B5773DH0-YK0 DDR3L 1600 2GB
RAM, DDR3L 1600 2GB, SK hynix,
HMT425S6AFR6A-PB 2GB DDR3L 1600
RAM, DDR3L 1600 2GB, Ramaxel,
RMT3170ED58F8W-1600
RAM, DDR3L 1600 2GB, Micron, MT4KTF25664HZ1G6E1 2GB DDR3L 1600
RAM, DDR3L 1600 4GB, Samsung, M471B5173BH0YK0 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, SK hynix,
HMT451S6AFR8A-PB 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, Ramaxel,
RMT3170EB68F9W-1600 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, Sharetronic,
SM321NQ08ICF 4GB DDR3L 1600
RAM, DDR3L 1600 4GB, Micron, MT8KTF51264HZ1G6J1 4GB DDR3L 1600
RAM, DDR3L 1600 8GB, Samsung, M471B1G73BH0YK0 8GB DDR3L 1600
RAM, DDR3L 1600 8GB, SK hynix,
HMT41GS6AFR8A-PB 8GB DDR3L 1600
RAM, DDR3L 1600 8GB, Sharetronic
SM322NW08IAF 8GB DDR3L 1600
RAM, DDR3L 1600 8GB, Micron, MT16KTF1G64HZ1G6E1 8GB DDR3L 1600
WLAN, WiFi 2x2 BGN+BT4.0, Intel, 7260BN
2x2BN+BT PCIE HMC WLAN
WLAN, WiFi 1x1 BGN Cbt BCM94313HMG 1x1BGN
HMC
WLAN, WiFi 1x1 BG Liteon HB125 1x1BGN HMC

CRU ID.

25205806
25212030
25209260
25209259
90004470
90004471
90004468
90004469
11200502
11201299
11201835
11201967
11201966

11201300
11201512
11201834
11201342
11200504
11201301
11201514
11201304
20200412
20200102
20200223

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Table 6. Parts list—Overall (Z510/Z510 Touch) (continued)
No. FRU

FRU no.

20200222

14
14
15
15
15
15
15
15
15
15
15
15
15
16
17
17
—

WLAN, WiFi 1x1 BGN+BT4.0 Cbt BCM943142HM
1x1BGN+BT4.0 HMC
WLAN, WiFi 1x1 BGN+BT4.0 Liteon WB225
1x1BGN+BT4.0 HMC
WLAN, WiFi 1x1 BGN+BT4.0 Liteon WB335
1x1BGN+BT4.0 HMC
HDD/SSD 500G 5400rpm ST500LM012 6G 9.5mm
5.4K 500G HDD
HDD/SSD 500G 5400rpm ST500LT012 6G 7mm 5.4K
500G HDD
HDD/SSD 500G 5400rpm HTS545050A7E660 6G
7mm 5.4K 500G HDD
HDD/SSD 500G 5400rpm MQ01ABF050 6G 7mm
5.4K 500G HDD
HDD/SSD 500G 5400rpm WD5000LPCX-24C6HT0
6G 7mm 5.4K 500G HDD
HDD/SSD 1TB 5400rpm ST1000LM024 6G 9.5mm
5.4K 1T HDD
HDD/SSD 1TB 5400rpm HTS541010A9E660 6G
9.5mm 5.4K 1T HDD
HDD/SSD 1TB 5400rpm TSB MQ01ABD100 6G
9.5mm 5.4K 1T HDD
HDD/SSD 1TB 5400rpm WD10JPCX-24UE4T0 6G
9.5mm 5.4K 1T HDD
HDD/SSD 1T Hybrid ST1000LM014 6G 9.5mm 1T
SSHD
HDD/SSD 500G Hybrid ST500LM000 6G 7mm 500G
SSHD
AILZB Speaker L+R
AILZB Lower Case Brown
AILZB Lower Case White
AC adapter (see “AC adapters” on page 105 ).

CRU ID.

20200224
20200437
16200387
16200383
16200404
16200433
16200395
16200385
16200400
16200429
16200393
16200389
16200391
90204000
90204001
90204002

Lenovo Z410/Z510/Z510 Touch

LCD FRUs
In Lenovo Z410/Z510/Z510 Touch, there are following types of LCDs.
• “14-in. HD TFT”
1

Z410/Z510/Z510 Touch Hardware Maintenance Manual

• “15.6-in. HD TFT”
1

Lenovo Z410/Z510/Z510 Touch

• “15.6-in. Touch HD TFT”
1

Z410/Z510/Z510 Touch Hardware Maintenance Manual
14-in. HD TFT

Table 7. Parts list—14-in. HD TFT
No. FRU

FRU no.

1
2
3
3
3
3
3

90203979
90203980
18200926
18200925
18200927
18200928
18200932

3
3
4
4
5
6
7
7

AILZA LCD Bezel
AILZA Hinge W/LCD Bracket
Panel, LGD LP140WH2-TPT1 HD AG F LED1 NB LCD
Panel, AUO B140XTN03.3 3A HD AG F LED1 NB LCD
Panel, SDC LTN140AT30-401 HD AG F LED1 NB LCD
Panel, CMI N140BGE-E33 HD AG F LED1 NB LCD
Panel, AUO B140RTN02.3 1A HD+ AG F LED1 NB
LCD
Panel, LGD LP140WD2 TPB1 HD+ AG F LED1 NB
LCD
Panel, CMI N140FGE-E32 HD+ AG F LED1 NB LCD
AILZA Camera 1M
AILZA Camera 0.3M
AILZA EDP Cable
AILZA Antenna
AILZA LCD Cover Brown
AILZA LCD Cover White

18200933
18201073
90004465
90004466
90203981
90203982
90203983
90203984

CRU ID.

Lenovo Z410/Z510/Z510 Touch

15.6-in. HD TFT

Table 8. Parts list—15.6-in. HD TFT
No. FRU

FRU no.

1
2
3

90204003
90204004
18201045

3
3
3
3
3
4
4
5
6
7
7

AILZB LCD Bezel
AILZB Hinge W/LCD Bracket
Panel, HD-AG eDP1.2 3.2t,AUO B156XTN03.5 1A HD
AG S LED1 LCD
Panel, HD-AG eDP1.2 3.2t,LGD LP156WHU TPB1 HD
AG S LED1 LCD
Panel, HD-AG eDP1.2 3.2t,CMI N156BGE-EA1 HD AG
S LED1 NB LCD
Panel, HD-AG eDP1.2 3.2t,SDC LTN156AT33 401 HD
AG S LED1 NB LCD
Panel, FHD-S-AG eDP1.2 3.2t,AUO B156HTN03.4 1A
FHD AG S LED1 NB LCD
Panel, FHD-S-AG eDP1.2 3.2t,CMI N156HGE-EA1
FHD AG S LED1 NB LCD
AILZA Camera 1M
AILZA Camera 0.3M
AILZB EDP Cable
AILZB Antenna
AILZB LCD Cover Brown
AILZB LCD Cover White

CRU ID.

18201046
18201074
18201047
18201064

18201065
90004465
90004466
90204005
90204006
90204007
90204008

15.6-in. Touch HD TFT

Table 9. Parts list—15.6-in. Touch HD TFT
No. FRU

FRU no.

CRU ID.

1
2
3
3
3
3
3
3
4
5
5
6
7

90204287
90204288
90400224
90400225
90400226
90400227
90400228
90400229
90004879
90204289
90204290
90204291
90204292

AILZC Hinge Cover
AILZC Hinge
AILZC LCD Module HD AUO+LGD
AILZC LCD Module HD AUO+CMI
AILZC LCD Module HD AUO+SDC
AILZC LCD Module HD AUO+AUO
AILZC LCD Module FHD AUO+CMI
AILZC LCD Module FHD AUO+AUO
AILZC Camera 1M
AILZC LCD Cable
AILZC LCD touch Cable
AILZC Antenna
AILZC LCD Cover

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Keyboard
Z410
Table 10. Parts list—Keyboard (Z410)
Language

P/N

Chicony

Z410

Sunrex

English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Japanese
Dutch
Greek
Hebrew
Hungarian
Nordic
Belgian
Icelandic
Slovenian
Swiss
US international
Czech&Slovak
Bulgarian
Indic
English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German

25211110
25211111
25211112
25211113
25211114
25211115
25211116
25211117
25211118
25211119
25211120
25211121
25211122
25211123
25211124
25211125
25211126
25211127
25211128
25211129
25211130
25211131
25211132
25211133
25211134
25211135
25211136
25211137
25211138
25211139
25211140
25211141
25211142
25211143
25211144
25211145
25211146
25211147
25211148
25211149
25211150
25211151
25211152
25211153

CRU ID.

Lenovo Z410/Z510/Z510 Touch

Table 10. Parts list—Keyboard (Z410) (continued)
Language

P/N

Sunrex
(continued)

Z410
(continued)

Darfon

Arabic
Brazilian
Dutch
Greek
Hebrew
Hungarian
Four Nordic countries
Belgian
Icelandic
Slovenian
Swiss
International English
Czechoslovakian
Bulgarian
Indian
U.S. English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian English&French
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Japanese
Dutch
Greek
Hebrew
Hungarian
Four Nordic countries
Belgian
Icelandic
Slovenian
Swiss
International English
Czechoslovakian
Bulgarian
Indian

25211154
25211155
25211157
25211158
25211159
25211160
25211161
25211162
25211163
25211164
25211165
25211166
25211167
25211168
25211169
25211170
25211171
25211172
25211173
25211174
25211175
25211176
25211177
25211178
25211179
25211180
25211181
25211182
25211183
25211184
25211185
25211186
25211187
25211188
25211189
25211190
25211191
25211192
25211193
25211194
25211195
25211196
25211197
25211198
25211199

CRU ID.

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Z510/Z510 Touch
Table 11. Parts list—Keyboard (Z510/Z510 Touch)
Language

P/N

Chicony

Z510/Z510
Touch

Chicony
Backlight KB

100

English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Japanese
Dutch
Greek
Hebrew
Hungarian
Nordic
Belgian
Icelandic
Slovenian
Swiss
US international
Czech&Slovak
Bulgarian
Indic
English
U.K. English
English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German

25213591
25213592
25213593
25213594
25213595
25213596
25213597
25213598
25213599
25213600
25213601
25213602
25213603
25213604
25213605
25213606
25213607
25213608
25213609
25213610
25213611
25213612
25213613
25213614
25213615
25213616
25213617
25213618
25213619
25213620
25213721
25213722
25213723
25213724
25213725
25213726
25213727
25213728
25213729
25213730
25213731
25213732
25213733
25213734
25213735

CRU ID.

Lenovo Z410/Z510/Z510 Touch

Table 11. Parts list—Keyboard (Z510/Z510 Touch) (continued)
Language

P/N

Chicony
Backlight KB
(continued)

Z510/Z510
Touch
(continued)

Sunrex Normal
KB

Arabic
Brazilian
Japanese
Dutch
Greek
Hebrew
Hungarian
Nordic
Belgian
Icelandic
Slovenian
Swiss
US international
Czech&Slovak
Bulgarian
Indic
English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Dutch
Greek
Hebrew
Hungarian
Nordic
Belgian
Icelandic
Slovenian
Swiss
US international
Czech&Slovak
Bulgarian
Indic

25213736
25213737
25213738
25213739
25213740
25213741
25213742
25213743
25213744
25213745
25213746
25213747
25213748
25213749
25213750
25213751
25213621
25213622
25213623
25213624
25213625
25213626
25213627
25213628
25213629
25213630
25213631
25213632
25213633
25213634
25213635
25213636
25213638
25213639
25213640
25213641
25213642
25213643
25213644
25213645
25213646
25213647
25213648
25213649
25213650

CRU ID.

101

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Table 11. Parts list—Keyboard (Z510/Z510 Touch) (continued)
Language

P/N

Sunrex
Backlight KB

Z510/Z510
Touch
(continued)

Darfon Normal
KB

102

English
U.K. English
English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian
Dutch
Greek
Hebrew
Hungarian
Nordic
Belgian
Icelandic
Slovenian
Swiss
US international
Czech&Slovak
Bulgarian
Indic
English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German
Arabic
Brazilian

25213752
25213753
25213754
25213755
25213756
25213757
25213758
25213759
25213760
25213761
25213762
25213763
25213764
25213765
25213766
25213767
25213768
25213770
25213771
25213772
25213773
25213774
25213775
25213776
25213777
25213778
25213779
25213780
25213781
25213782
25213651
25213652
25213653
25213654
25213655
25213656
25213657
25213658
25213659
25213660
25213661
25213662
25213663
25213664
25213665
25213666

CRU ID.

Lenovo Z410/Z510/Z510 Touch

Table 11. Parts list—Keyboard (Z510/Z510 Touch) (continued)
Language

Z510/Z510
Touch
(continued)

P/N
Japanese
Dutch
Greek
Hebrew
Hungarian
Nordic
Darfon Normal
Belgian
KB
Icelandic
(continued)
Slovenian
Swiss
US international
Czech&Slovak
Bulgarian
Indic
English
U.K. English
Italian
Spanish
Turkish
Thai
Portuguese
Latin
Canadian Bilingual (En+Fr)
Korean
Traditional Chinese
Russian
French
German
Arabic
Darfon Backlight
Brazilian
KB
Japanese
Dutch
Greek
Hebrew
Hungarian
Nordic
Belgian
Icelandic
Slovenian
Swiss
US international
Czech&Slovak
Bulgarian
Indic
English

25213667
25213668
25213669
25213670
25213671
25213672
25213673
25213674
25213675
25213676
25213677
25213678
25213679
25213680
25213681
25213682
25213683
25213684
25213685
25213686
25213687
25213688
25213689
25213690
25213691
25213692
25213693
25213694
25213695
25213696
25213697
25213698
25213699
25213700
25213701
25213702
25213703
25213704
25213705
25213706
25213707
25213708
25213709
25213710
25213783

CRU ID.

103

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Miscellaneous parts
Z410
Table 12. Parts list—Miscellaneous parts (Z410)
FRU

P/N

System miscellaneous parts:
• (a ) AILZA ODD Bracket
• (b ) AILZA ODD Bezel Rambo Brown
• (b ) AILZA ODD Bezel Rambo White
• (b ) AILZA ODD Bezel BD Brown
• (b ) AILZA ODD Bezel BD White
• (c ) AILZA HDD Bracket
• (d ) AILZA Rubber Brown
• (d ) AILZA Rubber White
• (e ) AILZA RG45 Door Brown
• (e ) AILZA RG45 Door White

90203960
90203956
90203957
90203958
90203959
90203955
90203965
90203966
90203967
90203968

Cable miscellaneous parts:
• (f ) AILZA TP Cable
• (g ) AILZA DC-IN Cable
• (h ) AILZA Power Board W/Cable
• (i ) AILZA USB Cable

90203971
90203973
90004451
90203973

CRU ID.

Note: Italicized letters in parentheses are references to the
exploded view in “Overall” on page 85 .

Z510/Z510 Touch
Table 13. Parts list—Miscellaneous parts (Z510/Z510 Touch)
FRU

P/N

System miscellaneous parts:
• (a ) AILZA ODD Bracket
• (b ) AILZA ODD Bezel Rambo Brown
• (b ) AILZA ODD Bezel Rambo White
• (b ) AILZA ODD Bezel BD Brown
• (b ) AILZA ODD Bezel BD White
• (c ) AILZA HDD Bracket
• (e ) AILZB RG45 Door Brown
• (e ) AILZB RG45 Door Brown

90203960
90203956
90203957
90203958
90203959
90203955
90203993
90203994

Cable miscellaneous parts:
• (f ) AILZA TP Cable
90203997
• (g ) AILZA DC-IN Cable
90203974
• (h ) AILZA Power Board W/Cable
90004467
Note: Italicized letters in parentheses are references to the
exploded view in “Overall” on page 85 .

104

CRU ID.

Lenovo Z410/Z510/Z510 Touch

AC adapters
Table 14. Parts list—3-pin AC adapters
FRU

P/N

65W, Delta ADLX65NDC3A 20V3.25A adapter
65W, Liteon ADLX65NLC3A 20V3.25A adapter
65W, Chicony ADLX65NCC3A 20V3.25A adapter
65W, Delta ADLX65NDC3B 20V3.25A adapter PPB
65W, Liteon ADLX65NLC3B 20V3.25A adapter PPB
90W, Delta ADLX90NDC3A 20V4.5A adapter
90W, Liteon ADLX90NLC3A 20V4.5A adapter
90W, Chicony ADLX90NCC3A 20V4.5A adapter

36200249
36200251
36200253
36200301
36200303
36200250
36200252
36200254

CRU ID.

Screws
Table 15. Parts list—screws
FRU

P/N

AILZA Screw M M 2.5D 5.7+2L K 6.0D
AILZA Screw M M 3.0D 3.0L K 4.9D
AILZA Screw M M 2 2.0D 2L K 7D
AILZA Screw M M 2.0D 2.5L K 5D
AILZA Screw M M 2D 1.5+3.4L K 3.5D 1T
AILZA Screw M M 2.5D 3.0L K 5.5D
AILZA Screw M M 2.5D 6.0L K 4.6D
AILZA Screw M M 2D 7.4+4.6L K 3.5D 1T(Z410)
AILZC SCREW M M 2.5D 4.5L K 5.5D(Z510/Z510 Touch)
AILZC SCREW M M 2.5D 3.5L K 5.3D(Z510/Z510 Touch)
AILZC SCREW M M 2D 2.5L K 4D 0.5T(Z510/Z510 Touch)

90203985
90203986
90203987
90203988
90203989
90203990
90203991
90203992
90204293
90204294
90204295

CRU ID.

105

Z410/Z510/Z510 Touch Hardware Maintenance Manual
Power cords
A Lenovo power cord for a specific country or region is usually available only in
that country or region:
Table 16. Parts list—3-pin power cords

106

Region

P/N

CCC
• LINETEK PC323+RVV300/300+LS15 1m
Argentina
• LINETEK LS15+H03VV-F+LP39 1m
Danmark
• LINETEK LS15+H03VV-F+LP-38 1m
Switzerland
• LINETEK LS15+H03VV-F+LP-37 1m
Brazil
• LINETEK LS15 H03VV-F LP26A 1m
Israel
• LINETEK LS15+H03VV-F+LP-41 1m
UL
• LINETEK LP-30B + SPT-2 + LS15 1m
UK
• LINETEK LP-61L+ H03VV-F+ LS15 1m
Indian
• LINETEK PE-361+ H05VV-F+ LS15 1m
Italy
• LINETEK LS15+H03VV-F+PE-336 1m
Korea
• LINETEK LS15+H05VV-F+LP-E04A 1m
Australia
• LINETEK LS15+H03VV-F+LP-23A 1m
Taiwan
• LINETEK LS15+VCTF+LP-53 1m
Japan
• LINETEK LS15+VCTF+LP-54 1m
Africa
• LINETEK LS15+H03VV-F+PE-364 1m
CE
• LINETEK LP-34+H03VV-F + LS15 1m
CCC
• Longwell LSG-31+RVV300/300+LS-18 1m
Argentina
• Longwell LP-24+H03VV-F+LS-18 1m
Danmark
• Longwell LP-40+H03VV-F+LS-18 1m
Switzerland
• Longwell LP-37+H03VV-F+LS-18 1m

145000600

CRU ID.

145000599
145000598
145000597
145000596
145000595
145000594
145000593
145000592
145000591
145000590
145000589
145000588
145000587
145000586
145000585
145000568
145000567
145000566
145000565

Lenovo Z410/Z510/Z510 Touch

Table 16. Parts list—3-pin power cords (continued)
Region

P/N

Brazil
• Longwell LP-46+H03VV-F+LS-18 1m
Israel
• Longwell LP-41+H03VV-F+LS-18 1m
UL
• Longwell LP-30B+SPT-2 18AWG+LS-18 1m
UK
• Longwell LP-61L+H03VV-F+LS-18 1m
Indian
• Longwell LP-67+BIS+LS-18 1m
Italy
• Longwell LP-22+H03VV-F+LS-18 1m
Korea
• Longwell LP-486+KTLH03VV-F+LS-5 1m
Australia
• Longwell LP-23A+LFC-3R+LS-18 1m
Taiwan
• Longwell LP-71+VCTF+LS-33 1m
Japan
• Longwell LP-54+VCTF+LS-18 1m
Africa
• Longwell LP-39+H03VV-F+LS-18 1m
CE
• Longwell LP-34A+H03VV-F+LS-18 1m
CCC
• VOLEX GB10S3+RVV 300/500+VAC5S 1m
UL
• Volex US15S3+SPT-2+VAC5S 1m
UK
• VOLEX MP5004+H03VV-F+VAC5S 1m
Indian
• VOLEX IA6A3+IS694+VAC5S 1m
Switzerland
• VOLEX MP232+H03VV-F+VAC5S 1m
Italy
• VOLEX IT10S3+HO3VV-F+VAC5S 1m
Denmark
• VOLEX MP233D+H03VV-F+VAC5S 1m
Korea
• VOLEX M2511+KETI IEC+VAC5S 1m
Australia
• VOLEX AU10S3+H03VV-F+VAC5S 1m
Taiwan
• VOLEX TW15CS3+VCTF+VAC5S 1m

145000564

CRU ID.

145000563
145000562
145000561
145000560
145000559
145000558
145000557
145000556
145000555
145000554
145000553

145000538
145000537
145000605
145000536
145000524
145000535
145000534
145000533
145000532
145000531

107

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Table 16. Parts list—3-pin power cords (continued)

108

Region

P/N

Japan
• VOLEX VAC5S+VCTF+M755 1m
Argentina
• VOLEX VA2073+H03VV-F+VAC5S 1m
Brazil
• VOLEX CH10S3+H03VV-F+VAC5S 1m
Israel
• VOLEX SI16S3+H03VV-F+VAC5S 1m
CE
• VOLEX M2511+HO3VV-F+VAC5S 1m
UK
• lux 0031+H03VV-F 0.75/3C+0011 1m
Europe
• lux 0033+H03VV-F 0.75/3C+0011 1m
US
• lux 0014+SPT-2 60ºC 18/3C+0016 1m
China
• lux 0036+RVV 300/300 0.75/3C+0002 1m
Indian
• lux 0046+IS694 0.75/3C+0011 1m
Japan
• lux 0018(E)+VCTF 0.75/3C+0021 1m
Australia
• lux 0038+H03VV-F 0.75/3C+0011 1m
Taiwan
• lux 0019+VCTF 0.75/3C+0021 1m
Korea
• lux 0033+H03VV-F 0.75/3C+0011 1m
Italy
• lux 0029+H03VV-F 0.75/3C+0011 1m
South Africa
• lux 0044+H03VV-F 0.75/3C+0011 1m
Brazil
• lux 0034+H03VV-F 0.75/3C+0011 1m
Israel
• lux 0041+H03VV-F 0.75/3C+0011 1m
Switzerland
• lux 0027+H03VV-F 0.75/3C+0011 1m
Denmark
• lux 0048+H03VV-F 0.75/3C+0011 1m
Argentina
• lux 0040+H03VV-F 0.75/3C+0011 1m

145000530

CRU ID.

145000528
145000527
145000526
145000525
145500000
145500001
145500002
145500003
145500004
145500005
145500006
145500007
145500008
145500009
145500010
145500011
145500012
145500013
145500014
145500015

Notices

Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any other product,
program, or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents.
L E N O V O G R O U P LT D . P R O V I D E S T H I S P U B L I C AT I O N “ A S I S ”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of express or implied
warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes
will be incorporated in new editions of the publication. Lenovo may make
improvements and/or changes in the product(s) and/or the program(s)
described in this publication at any time without notice.
The products described in this document are not intended for use in
implantation or other life support applications where malfunction may result in
injury or death to persons. The information contained in this document does not
affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the
intellectual property rights of Lenovo or third parties. All information contained
in this document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for
this Lenovo product, and use of those Web sites is at your own risk.

109

Z410/Z510/Z510 Touch Hardware Maintenance Manual

Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.

Trademarks
The following terms are either registered trademarks or trademarks of Lenovo
in the United States and/or other countries:
Lenovo®
Lenovo logo®
IdeaPad®
VeriFace®
OneKey Recovery®
APS®
Power Express®
Energy Management and ReadyComm®
The following terms are trademarks of Microsoft Corporation in the United
States, other countries, or both:
Windows®
Windows Vista®
Windows® 7
Windows® 8
The following are trademarks of Intel Corporation or its subsidiaries in the
United States, other countries, or both:
Intel®
Intel® Core™ 2 Duo
Other company, product, or service names may be the trademarks or service
marks of others.

110

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Lenovo
Create Date                     : 2013:08:22 09:24:49+08:00
Modify Date                     : 2013:08:22 09:28:20+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Instance ID                     : uuid:46bfa890-0a74-434d-b368-b616cd03e692
Document ID                     : adobe:docid:indd:85d77ef0-0fc2-11df-aaad-87e79053a371
Original Document ID            : adobe:docid:indd:85d77ef0-0fc2-11df-aaad-87e79053a371
Rendition Class                 : proof:pdf
Derived From Instance ID        : 85d77eef-0fc2-11df-aaad-87e79053a371
Derived From Document ID        : adobe:docid:indd:715e99cc-0a23-11df-a8fc-8b1b5513e56f
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:ECC761C54B05E311B2FCCCCD626846D2, xmp.iid:EDC761C54B05E311B2FCCCCD626846D2, xmp.iid:A24650884C05E311B2FCCCCD626846D2, xmp.iid:E19F2EAA4E05E311B2FCCCCD626846D2, xmp.iid:0C59621B5205E311B2FCCCCD626846D2, xmp.iid:462D09545205E311B2FCCCCD626846D2, xmp.iid:62B8FD825305E311B2FCCCCD626846D2, xmp.iid:EE3363ED5705E311B2FCCCCD626846D2, xmp.iid:96F98F4C5A05E311B2FCCCCD626846D2, xmp.iid:1DF02EE85B05E311B2FCCCCD626846D2, xmp.iid:1E1F40E17105E311862B87531427F94E, xmp.iid:4C8EFE157205E3119B94CD9C9F98FFF5, xmp.iid:E174F1537D05E311AEE9AF7F4F747A57, xmp.iid:3953E88A7D05E311AEE9AF7F4F747A57, xmp.iid:68B8F1947D05E311AEE9AF7F4F747A57, xmp.iid:7FE7BEAA7D05E311AEE9AF7F4F747A57, xmp.iid:73A0DB4F7E05E311AEE9AF7F4F747A57, xmp.iid:A214F3AB7E05E311AEE9AF7F4F747A57, xmp.iid:29DCC2E07E05E311AEE9AF7F4F747A57, xmp.iid:84B48AEC7E05E311AEE9AF7F4F747A57, xmp.iid:A5836C1C7F05E311AEE9AF7F4F747A57, xmp.iid:56B2A61E8005E311AEE9AF7F4F747A57, xmp.iid:5DEBFD9C8005E311AEE9AF7F4F747A57, xmp.iid:302059C88005E311AEE9AF7F4F747A57, xmp.iid:C80C8AED8005E311AEE9AF7F4F747A57, xmp.iid:1EEB928E8105E311AEE9AF7F4F747A57, xmp.iid:D1D4479B8105E311AEE9AF7F4F747A57, xmp.iid:A7C339628205E311AEE9AF7F4F747A57, xmp.iid:601D14D20D06E311BCD0A7CA0C0AB5A2, xmp.iid:4D9F38B40E06E311BCD0A7CA0C0AB5A2, xmp.iid:54413D461606E311BCD0A7CA0C0AB5A2, xmp.iid:005922211706E311BCD0A7CA0C0AB5A2, xmp.iid:37141C471706E311BCD0A7CA0C0AB5A2, xmp.iid:DEAA6EAB1706E311BCD0A7CA0C0AB5A2, xmp.iid:158C5DDB1706E311BCD0A7CA0C0AB5A2, xmp.iid:BA3626E41706E311BCD0A7CA0C0AB5A2, xmp.iid:2313E6683106E311B69FBBBD01FEE762, xmp.iid:586503813206E311B69FBBBD01FEE762, xmp.iid:FB2B5E063306E311B69FBBBD01FEE762, xmp.iid:4354F7D13306E311B69FBBBD01FEE762, xmp.iid:666893CB3706E311B69FBBBD01FEE762, xmp.iid:34E1E1103806E311B69FBBBD01FEE762, xmp.iid:6E2F16383806E311B69FBBBD01FEE762, xmp.iid:3E49A93D3806E311B69FBBBD01FEE762, xmp.iid:5341CA4E4306E31187A1CBE04A35E6BF, xmp.iid:57BB9B674306E31187A1CBE04A35E6BF, xmp.iid:1E4258FE4306E31187A1CBE04A35E6BF, xmp.iid:B0E690F55206E311ACF2AE497F720684, xmp.iid:012722605406E311ACF2AE497F720684, xmp.iid:F8E77B317009E31188A0B141277F36CA, xmp.iid:A521D0137109E31188A0B141277F36CA, xmp.iid:78F2ABA27109E31188A0B141277F36CA, xmp.iid:D8608DA77109E31188A0B141277F36CA, xmp.iid:318BF50D7209E31188A0B141277F36CA, xmp.iid:831C38282F0AE311A4D6E2132BCB8724, xmp.iid:E23689842F0AE311A4D6E2132BCB8724, xmp.iid:46B738E8300AE311A4D6E2132BCB8724, xmp.iid:1DE3509B310AE311A4D6E2132BCB8724, xmp.iid:547CDE27C90AE311BB0091BFF63A936D, xmp.iid:4D833D52C90AE311BB0091BFF63A936D, xmp.iid:D34C9096C90AE311BB0091BFF63A936D, xmp.iid:7B096C9DC90AE311BB0091BFF63A936D
History When                    : 2013:08:15 09:41:14+08:00, 2013:08:15 09:41:14+08:00, 2013:08:15 09:46:41+08:00, 2013:08:15 10:01:57+08:00, 2013:08:15 10:26:35+08:00, 2013:08:15 10:28:10+08:00, 2013:08:15 10:36:38+08:00, 2013:08:15 11:08:15+08:00, 2013:08:15 11:25:14+08:00, 2013:08:15 11:36:44+08:00, 2013:08:15 14:14:02+08:00, 2013:08:15 14:15:30+08:00, 2013:08:15 15:35:58+08:00, 2013:08:15 15:37:31+08:00, 2013:08:15 15:37:47+08:00, 2013:08:15 15:38:24+08:00, 2013:08:15 15:43:01+08:00, 2013:08:15 15:45:36+08:00, 2013:08:15 15:47:04+08:00, 2013:08:15 15:47:24+08:00, 2013:08:15 15:48:44+08:00, 2013:08:15 15:55:57+08:00, 2013:08:15 15:59:29+08:00, 2013:08:15 16:00:42+08:00, 2013:08:15 16:01:45+08:00, 2013:08:15 16:06:15+08:00, 2013:08:15 16:06:36+08:00, 2013:08:15 16:12:10+08:00, 2013:08:16 08:50:18+08:00, 2013:08:16 08:56:37+08:00, 2013:08:16 09:50:48+08:00, 2013:08:16 09:56:56+08:00, 2013:08:16 09:57:59+08:00, 2013:08:16 10:00:48+08:00, 2013:08:16 10:02:08+08:00, 2013:08:16 10:02:23+08:00, 2013:08:16 13:05:03+08:00, 2013:08:16 13:12:53+08:00, 2013:08:16 13:16:37+08:00, 2013:08:16 13:22:18+08:00, 2013:08:16 13:50:46+08:00, 2013:08:16 13:52:42+08:00, 2013:08:16 13:53:48+08:00, 2013:08:16 13:53:57+08:00, 2013:08:16 15:13:10+08:00, 2013:08:16 15:13:52+08:00, 2013:08:16 15:18:05+08:00, 2013:08:16 17:05:12+08:00, 2013:08:16 17:15:21+08:00, 2013:08:20 16:12:02+08:00, 2013:08:20 16:18:21+08:00, 2013:08:20 16:22:21+08:00, 2013:08:20 16:22:29+08:00, 2013:08:20 16:25:21+08:00, 2013:08:21 14:59+08:00, 2013:08:21 15:01:35+08:00, 2013:08:21 15:11:32+08:00, 2013:08:21 15:16:32+08:00, 2013:08:22 09:21:22+08:00, 2013:08:22 09:22:33+08:00, 2013:08:22 09:24:28+08:00, 2013:08:22 09:24:39+08:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Metadata Date                   : 2013:08:22 09:28:20+08:00
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 7207 bytes, use -b option to extract), (Binary data 4457 bytes, use -b option to extract)
Doc Change Count                : 17205
Format                          : application/pdf
Creator                         : Lenovo
Title                           : Z410&Z510&Z510 Touch HMM
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 114

EXIF Metadata provided by EXIF.tools

Lenovo Z410Z510Z510Touch Hmm Z410&Z510&Z510 Touch User Manual Hardware Maintenance Idea Pad Z410, Z510 Laptop (ideapad)

Navigation menu

Versions of this User Manual:

Views

Navigation