Lexmark 4062-RF1 RFID UHF Option User Manual User s Guide

Lexmark International Inc RFID UHF Option User s Guide

User Mnaul

RFID UHF optionUser's Guidewww.lexmark.comLexmark Confidential until announced
Safety informationRefer service or repairs, other than those described in the user documentation, to a professional service person.CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properlyinstalled in their marked plug-in ports.CAUTION—POTENTIAL INJURY: Use of controls or adjustments or performance of procedures other than those specified herein mayresult in hazardous radiation exposure.This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safetyfeatures of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts.CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime aftersetting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any otherdevices attached to the printer, then turn them off as well, and unplug any cables going into the printer.Lexmark Confidential until announced
ContentsSafety information....................................................................................2Choosing output and input devices......................................................5Choosing an output device............................................................................................................................................................5Choosing an input device...............................................................................................................................................................5Preparing to print.....................................................................................6Loading RFID labels...........................................................................................................................................................................6Label Guidelines.................................................................................................................................................................................7Printing........................................................................................................8Identifying rejected labels...............................................................................................................................................................8Canceling a print job from the printer control panel............................................................................................................8Understanding the RFID menu...............................................................9Configuring RFID-specific settings...............................................................................................................................................9Understanding RFID printer messages...............................................11RFID error messages.......................................................................................................................................................................11RFID service messages...................................................................................................................................................................12Troubleshooting......................................................................................13Solving basic problems..................................................................................................................................................................13Solving basic printer problems................................................................................................................................................................13Printer control panel display is blank or displays only diamonds...............................................................................................13Solving printing problems............................................................................................................................................................13Jobs do not print...........................................................................................................................................................................................13Solving option problems..............................................................................................................................................................14Option does not operate correctly or quits after it is installed....................................................................................................14Paper trays.......................................................................................................................................................................................................145-bin mailbox.................................................................................................................................................................................................15Output options..............................................................................................................................................................................................15Memory card..................................................................................................................................................................................................15Flash memory card.......................................................................................................................................................................................15Internal Solutions Port................................................................................................................................................................................15Contacting Customer Support....................................................................................................................................................15Notices.......................................................................................................16Product information.......................................................................................................................................................................16Edition notice....................................................................................................................................................................................16Index..........................................................................................................20Lexmark Confidential until announcedContents3
Lexmark Confidential until announced 4
Choosing output and input devicesChoosing an output deviceOutput devices used in printing labels include the output expander, high-capacity output stacker, and the adjustable stacker.Choose an output device based on the software program, the length of label needed, and the number of labels that youexpect to print at one time. To order an output device, visit the Lexmark Web site at www.lexmark.com.Output device Part numberOutput expanderNote: Lexmark recommends using the adjustable stacker when using dual Web media equal to or greater thanthe length of an 8.5 x 11-inch sheet.30G0851High-capacity output stackerNote: Lexmark recommends using the adjustable stacker when using dual Web media equal to or greater thanthe length of an 8.5 x 11-inch sheet.30G0853Adjustable stacker (standard exit bin option)Note: The adjustable stacker is useful in situations in which label media approaches lengths that could extendbeyond the length of the standard exit bin. It allows customers to tailor the output stacking properties of theirmedia for maximum effectiveness.20G1359Choosing an input deviceInput devices available for this printer include the 250-sheet drawer and the 550-sheet drawer. Choose an input devicebased on the software program, the length of label needed, and the number of labels that you expect to print at one time.To order an input device, visit the Lexmark Web site at www.lexmark.com.Input device RFID label support Part number250-sheet drawer Yes 30G0800550-sheet drawer Yes 30G0802Lexmark Confidential until announcedChoosing output and input devices5
Preparing to printLoading RFID labelsNote: Do not remove a tray when a job is printing or when the printer control panel indicator light is blinking. Doing so maycause a jam.1Remove the tray from the printer, and place it on a flat, level surface.2Squeeze the side guide tab, and slide the guide to the outer edge of the tray.3Flex the label sheets back and forth to loosen them, and then fan them. Do not fold or crease the label sheets. Straightenthe edges on a level surface.4Place the label sheets with the print side facing down and the labels positioned at the front of the tray.Note: When loading labels, leave at least 1 inch of space between the top of the label stack and the top of the drawer.Overloading may cause paper jams or damage to the labels.5Squeeze the rear guide tab, and slide the guide to the correct position for the size label sheets you are loading.6Insert the tray into the printer.The increased thickness of RFID labels reduces the capacity of input and output devices. For information on labelconstruction, see the Card Stock and Label Guide on the Lexmark Web site at www.lexmark.com/publications.Lexmark Confidential until announcedPreparing to print6
Proper tag orientation for printingTags must be built to EPC class 1 generation 2 specifications (IS0 18000-6C).Examples of tags known to work correctly:•Avery Dennison: AD-222•Raflatec: Dogbone 3000838The following is a sample of a label sheet. Labels can be printed anywhere in the white area and can be printed in portraitor landscape orientation.Note: The RFID UHF option supports one tag per sheet.Label GuidelinesLabels are one of the most difficult print materials for laser printers. Printing labels on the RFID printer requires a specialfuser cleaner that prevents duplexing. It is recommended that you install a special oil fuser cleaner, P/N40X2665, when yourun labels. When you order a new cartridge, be sure the cartridge includes the correct fuser cleaner.It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult theLexmark “Converter Lists” to see which converters have successfully developed this type of label. You must install a specialfuser wiper. The wax wiper that is used with the RFID printer is P/N40X2666 (cartridges designed for duplex label printingcontain two wax wipers). Change the wax wiper at the halfway point of your normal cartridge usage to provide additionalcleaning and optimize performance. It is not recommended that you use wax wipers with vinyl labels. Contact your Suppliesand Label Specialist for information on oil and wax vinyl label cartridges.Lexmark Confidential until announcedPreparing to print7
PrintingIdentifying rejected labelsWhen a label is rejected, a unique defective tag marking pattern or symbol appears at the bottom of the label sheet as shownin the following diagram.Note: A pattern or symbol appears only if Yes is selected from the Mark on Error menu.Canceling a print job from the printer control panelIf the job is formatting or already printing, and Cancel a job appears on the first line of the display:1Press the arrow buttons until Cancel a job appears.A list of jobs appears.2Press the arrow buttons until appears next to the job you want to cancel, and then press .Note: Once a print job is sent, to easily cancel a job, press . The Stopped screen appears. Press the arrow buttonsuntil Cancel a job appears, and then press .Lexmark Confidential until announcedPrinting8
Understanding the RFID menuConfiguring RFID-specific settingsThe RFID menu is used to configure RFID-specific settings.Note: RFID settings appear on the menu settings page. For information on printing a menu settings page, see the User'sGuide available on the Software and Documentation CD.Press to access the Menu options. Select RFID Menu from the list.The RFID Menu settings appear.Menu Settings PageRetry CountStop on ErrorMark on ErrorReject BinReset Tag CountersRetry countMenu selection Purpose Option CommentsRetry Count Determines how many times to retry programming an RFID pagewhen a tag refuses to program. Each retry uses a new sheet ofRFID media.0–255 Zero is the factory default setting.Stop on ErrorMenu selection Purpose Option CommentsStop on Error Determines whether to stop printing and post a message on thedisplay when the Retry Count is exhausted YesNoYes is the factory default setting.Mark on ErrorMenu selection Purpose Option CommentsMark on Error Tells the printer to print a defective tag pattern on the bottom ofany media when a defective tag is detected YesNoNo is the factory default setting.Lexmark Confidential until announcedUnderstanding the RFID menu9
Reject BinMenu selection Purpose Option CommentsReject Bin Determines where to send sheetswith RFID tags that failed toprogram correctly. Standard Binand Disabled are displayed if nooption bins are installed.DisabledStandard BinBin 1Bin 2Bin 3Bin 4Bin 5Bin 6Bin 7Bin 8Bin 9Bin 10Note: Bins 7–10 are notrecommended for label applications.Disabled is the factory defaultsetting.Reset Tag CountersMenu selection Purpose Option CommentsReset Tag Counters Clears the current version of tag counters(passed and failed). Reset is the only menuselection.ValueResetWhen Reset is selected, a “Contents will be lost”confirmation prompt appears.Lexmark Confidential until announcedUnderstanding the RFID menu10
Understanding RFID printer messagesRFID error messagesMessage Action44.00 RFID error (generic) 1Turn the printer off.2Unplug the power cord from the wall outlet.3Check all cable connections.4Connect the power cord to a grounded outlet.5Turn the printer on.6If the message recurs, contact Customer Support, and report the messagenumber and a description of the problem.44.01 Generic parse error •Cancel the current job and reprint.•Make sure the RFID media is loaded in the proper drawer. For moreinformation see “Loading RFID labels” on page 6.•Contact the software program solution provider if the percentage of failureseems high.44.10 Maximum length exceeded44.11 Data is bad44.12 Missing bytes in subcommand44.13 Too many bytes in subcommand44.14 Generic invalid argument error44.15 Invalid magic number44.16 Known but unsupported magic number44.17 Illegal characters in subcommand44.18 Invalid opcode44.19 Valid but unsupported opcode44.20 Invalid protocol44.21 Valid but unsupported protocol44.22 Operation not supported by reader44.23 Invalid ID length for given protocol44.24 Invalid ID bit pattern for given protocol44.25 Too many tags on page44.26 Tag location parameters invalid44.29 Feature not supported44.31 Generic run-time reader error44.32 Reader response timeout44.33 Garbled or short response from reader44.34 Read/verify operation failedLexmark Confidential until announcedUnderstanding RFID printer messages11
RFID service messagesMessage Action902.81 Service engine software error 1Turn the printer off.2Unplug the power cord.3Check all cable connections.4Make sure the RFID UHF option is positioned under theprinter, or, if a duplex unit is installed, it is positioned underthe duplex unit.5Connect the power cord to a properly grounded outlet.6Turn the printer on.7If the service message recurs, contact Customer Support,and report the message number and a description of theproblem.985.01 Unable to communicate with interface card985.02 Unable to communicate with radio985.03 Radio fails internal self test985.04 Antenna appears disconnected985.05 Radio firmware flash upgrade failed985.06 Antenna is plugged into the incorrect portLexmark Confidential until announcedUnderstanding RFID printer messages12
TroubleshootingSolving basic problemsSolving basic printer problemsIf there are basic printer problems, or the printer is unresponsive, make sure:•The power cord is plugged into the printer and a properly grounded electrical outlet.•The electrical outlet is not turned off by any switch or breaker.•The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.•Other electronic equipment plugged into the outlet is working.•The printer is turned on. Check the printer power switch.•The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.•All options are properly installed.•The printer driver settings are correct.Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printerback on. This often fixes the problem.Printer control panel display is blank or displays only diamondsThe printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.Solving printing problemsJobs do not printThese are possible solutions. Try one or more of the following:MAKE SURE THE PRINTER IS READY TO PRINTMake sure Ready or Power Saver appears on the display before sending a job to print.CHECK TO SEE IF THE STANDARD EXIT BIN IS FULLRemove the stack of paper from the standard exit bin.CHECK TO SEE IF THE PAPER TRAY IS EMPTYLoad paper in the tray.MAKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED•Verify that you are using the correct printer software.•If you are using a USB port, make sure you are running a supported operating system and using compatible printersoftware.Lexmark Confidential until announcedTroubleshooting13
MAKE SURE THE INTERNAL PRINT SERVER IS INSTALLED PROPERLY AND WORKING•Make sure the internal print server is properly installed and that the printer is connected to the network.•Print a network setup page and check that the status shows Connected. If the status is Not Connected, check thenetwork cables, and then try printing the network setup page again. Contact your system support person to makesure the network is functioning correctly.Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.MAKE SURE YOU ARE USING A RECOMMENDED USB, SERIAL, OR ETHERNET CABLEFor more information, visit the Lexmark Web site at www.lexmark.com.MAKE SURE PRINTER CABLES ARE SECURELY CONNECTEDCheck the cable connections to the printer and print server to make sure they are secure.For more information, see the setup documentation that came with the printer.Solving option problemsSettings chosen from the software program or application can change or override settings chosen from the printer controlpanel. If an option is not functioning, then make sure it is selected in the software as well as the printer control panel.Option does not operate correctly or quits after it is installedThese are possible solutions. Try one or more of the following:RESET THE PRINTERTurn the printer off, wait about 10 seconds, and then turn the printer on.CHECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER1Turn the printer off.2Unplug the printer.3Check the connection between the option and the printer.MAKE SURE THE OPTION IS SELECTEDFrom the computer you are printing from, select the RFID option.Paper traysThese are possible solutions. Try one or more of the following:MAKE SURE THE PAPER IS LOADED CORRECTLY1Open the paper tray.2Check for paper jams or misfeeds.3Make sure paper guides are aligned against the edges of the paper.4Make sure the paper tray closes properly.RESET THE PRINTERTurn the printer off, wait about 10 seconds, and then turn the printer on.Lexmark Confidential until announcedTroubleshooting14
MAKE SURE THE PAPER TRAY IS INSTALLED CORRECTLYIf the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not beproperly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that came withthe paper tray, or go to www.lexmark.com/publications to view the paper tray instruction sheet.5-bin mailboxIf the 5-bin mailbox is listed on the menu settings page, but paper jams when it exits the printer and enters the mailbox,then it may not be properly installed. Turn the printer off and reinstall the 5-bin mailbox. For more information, see thehardware setup documentation that came with the 5-bin mailbox, or go to www.lexmark.com/publications to view the5-bin mailbox instruction sheet.Output optionsIf the output expander, high capacity output stacker, or the adjustable stacker is listed on the menu settings page, but paperjams when it exits the printer or enters the output option, then the option may not be properly installed. Reinstall the option.For more information, see the hardware setup documentation that came with the option.Memory cardMake sure the memory card is securely connected to the printer system board.Flash memory cardMake sure the flash memory card is securely connected to the printer system board.Internal Solutions PortIf the LexmarkTM Internal Solutions Port (ISP) does not operate correctly, then these are possible solutions. Try one or moreof the following:CHECK THE ISP CONNECTIONS•Make sure the ISP is securely attached to the printer system board.•Make sure the cable is securely connected to the correct connector.CHECK THE CABLEMake sure you are using the correct cable and that it is securely connected.MAKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLYFor information about installing software for network printing, see the Networking Guide on the Software andDocumentation CDContacting Customer SupportWhen you call Customer Support, describe the problem you are experiencing, the message on the display, and thetroubleshooting steps you have already taken to find a solution.You need to know your printer model type and serial number. For more information, see the label on the inside top frontcover of the printer. The serial number is also listed on the menu settings page.In the U.S. or Canada, call (1-800-539-6275). For other countries/regions, visit the Lexmark Web site atwww.lexmark.com.Lexmark Confidential until announcedTroubleshooting15
NoticesProduct informationMachine type:machine_typeModel(s):model_number_1Edition noticeedition_dateThe following paragraph does not apply to any country where such provisions are inconsistent with local law:LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSOR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions;therefore, this statement may not apply to you.This publication could include technical inaccuracies or typographical errors. Changes are periodically made to theinformation herein; these changes will be incorporated in later editions. Improvements or changes in the products or theprograms described may be made at any time.References in this publication to products, programs, or services do not imply that the manufacturer intends to make theseavailable in all countries in which it operates. Any reference to a product, program, or service is not intended to state orimply that only that product, program, or service may be used. Any functionally equivalent product, program, or servicethat does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operationin conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are theuser’s responsibility.For Lexmark technical support, visit support.lexmark.com.For information on supplies and downloads, visit www.lexmark.com.If you don't have access to the Internet, you can contact Lexmark by mail:Lexmark International, Inc.Bldg 004-2/CSC740 New Circle Road NWLexington, KY 40550USAcopyright_dateAll rights reserved.TrademarksLexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United Statesand/or other countries.All other trademarks are the property of their respective owners.UNITED STATES GOVERNMENT RIGHTSThis software and any accompanying documentation provided under this agreement are commercial computer softwareand documentation developed exclusively at private expense.Lexmark Confidential until announcedNotices16
Federal Communications Commission (FCC) compliance informationstatementThis product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) thisdevice must accept any interference received, including interference that may cause undesired operation.The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment isoperated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult your point of purchase or service representative for additional suggestions.The manufacturer is not responsible for radio or television interference caused by using other than recommended cablesor by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void theuser's authority to operate this equipment.Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device, use aproperly shielded and grounded cable such as Lexmark part number 1021294 for USB attach. Use of a substitute cable notproperly shielded and grounded may result in a violation of FCC regulations.Any questions regarding this compliance information statement should be directed to:Director of Lexmark Technology & ServicesLexmark International, Inc.740 West New Circle RoadLexington, KY 40550(859) 232–3000Modification noticePursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by themanufacturer may cause harmful interference and void your authority to operate this equipment. Use of supplied data cableis required to comply with the Class B limits of Part 15 of the FCC Rules. This product does not contain any user serviceablecomponents and is to be used with the supplied antenna only.Exposure to radio frequency radiationThe radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatoryagencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for thisdevice to satisfy the RF exposure requirements of the FCC and other regulatory agencies.US/Canada radio frequency statementDue to radio frequency limitations, this product works only within the United States and Canada.Lexmark Confidential until announcedNotices17
Industry Canada radio interference statementIndustry Canada (Canada)This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1)this device may not cause interference, and (2) this device must accept any interference, including interference that maycause undesired operation of the device.The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fieldsin excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Website www.hc-sc.gc.ca/rpb.The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specificationswere met.Industry Canada (Canada)Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditionssuivantes :(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquantd'altérer son fonctionnement.L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucunchamp HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb.Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme auxspécifications techniques d'Industry Canada.European Community (EC) directives conformity statement for radioproductsThis product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, and1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagneticcompatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment andtelecommunications terminal equipment.Compliance is indicated by the CE marking.A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing andTechnical Support, Lexmark International, S. A., Boigny, France.This product satisfies the limits of EN 55022; safety requirements of EN 60950; radio spectrum requirements of ETSI EN 302208; and the EMC requirements of EN 55024, ETSI EN 301 489-1 and ETSI EN 301 489-3.Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základnímipožadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevantekrav i direktiv 1999/5/EF.Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit dengrundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣΟΔΗΓΙΑΣ 1999/5/ΕΚ.Lexmark Confidential until announcedNotices18
English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essentialrequirements and other relevant provisions of Directive 1999/5/EC.Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esencialesy cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜpõhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten jamuiden sitä koskevien direktiivin ehtojen mukainen.Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigencesfondamentales et autres dispositions pertinentes de la directive 1999/5/CE.Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknekés az 1999/5/EC irányelv egyéb elõírásainak.Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur,sem gerðar eru í tilskipun 1999/5/EC.Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenzialied alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajāmprasībām un citiem ar to saistītajiem noteikumiem.Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas1999/5/EB direktyvos nuostatas.Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali uma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiëleeisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrigerelevante krav i direktiv 1999/5/EF.Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymiwymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outrasdisposições da Diretiva 1999/5/CE.Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky príslušnéustanovenia smernice 1999/5/ES.Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi relevantnimidoločili direktive 1999/5/ES.Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentligaegenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.Wireless device noticeIn some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, inhospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of thisdevice, ask for authorization to use it prior to turning it on.Lexmark Confidential until announcedNotices19
IndexNumerics44.xx 11902.xx 12982.xx 12985.xx 12Bbox contents 0Ccalling Customer Support 15canceling a job from the printer control panel 8checking an unresponsive printer 13configuration printer 0contacting Customer Support 15contents, box 0Ddisplay troubleshooting display is blank 13display shows only diamonds 13Eemission notices 17, 18FFCC notices 17firmware card installing 0flash memory card installing 0troubleshooting 15fuser wiper installing 0Iidentifying rejected labels 8inferface card installing 0input device choosing 5Internal Solutions Port troubleshooting 15Llabels loading 6tag orientation 6loading labels 6Mmemory card troubleshooting 15messages RFID error 11RFID service 12Nnotices 16, 17, 18, 19Ooptions firmware card 0flash memory card 0output device choosing 5Pprint job canceling from the printer controlpanel 8print troubleshooting jobs do not print 13printer configuration 0printer messages 44.xx 11902.xx 12982.xx 12985.xx 12printer options troubleshooting 4-bin mailbox 155-bin mailbox 15flash memory card 15high capacity output expander 15Internal Solutions Port 15memory card 15option not working 14paper trays 14StapleSmart finisher 15printer problems, solving basic 13Rrejected labels identifying 8RFID cable connecting 0removing packaging 0RFID menu using 9RFID UHF option installing 0removing packaging 0Ssafety information 2system board accessing 0Ttroubleshooting checking an unresponsive printer 13contacting Customer Support 15solving basic printer problems 13troubleshooting, display display is blank 13display shows only diamonds 13troubleshooting, print jobs do not print 13troubleshooting, printer options 4-bin mailbox 155-bin mailbox 15flash memory card 15high capacity output expander 15Internal Solutions Port 15memory card 15option not working 14paper trays 14StapleSmart finisher 15Uunboxing RFID UHF option 0verifying box contents 0using the RFID menu 9Lexmark Confidential until announcedIndex20

Navigation menu