Lexmark C912 Quick Start Guide Setup

2014-07-06

• Contents
• Introduction
  • About your printer
  • Other sources of information
• Step1: Unpack your printer
• Step2: Select a location for your printer
  • Considering environmental issues
  • Allowing enough space
• Step3: Set up the printer and paper handling options
  • Installing the printer base or cabinet
  • Installing a 550sheetdrawer
  • Positioning the printer
  • Installing an optional heavy media tray
  • Installing an optional duplex unit
  • Installing an optional high capacity feeder
  • Attaching the paper tray labels
• Step4: Install printer supplies
  • Opening the top cover
  • Installing the fuser oil coating roll
  • Installing the photodevelopers
  • Installing the toner cartridges
  • Attaching an adhesive operator paneloverlay
  • Closing the top cover
• Step5: Install memory and option cards
  • Removing the system board access cover
  • Installing a memorycard
  • Installing a firmwarecard
  • Installing a hard disk
  • Installing an optioncard
  • Reinstalling the system board access cover
• Step6: Load paper
  • Loading the paper trays
  • Loading the multipurposefeeder
  • Loading the high capacity feeder
• Step7: Attach cables
  • Attaching a localcable
  • Attaching a networkcable
  • Turning on the printer
• Step8: Install drivers for local printing
  • Windows
    • Before you install
    • Using WindowsXP withUSBor parallelcable
    • Using Windows2000 withUSBor parallelcable
    • Using WindowsMe withUSBor parallelcable
    • Using Windows98 withaUSBor parallelcable
    • Using WindowsNT withaparallelcable
    • Using Windows 95 withaparallelcable
  • Macintosh
    • Creating a desktop printericon (Macintosh8.6–9.x)
    • Creating a queue in Print Center (MacintoshOSX)
  • UNIX/Linux
  • Serial connections
    • Setting parameters in the printer
    • Installing a printer driver
    • Setting parameters inthe communications (COM) port
• Step9: Verify printer setup
  • Printing a menu settings page
  • Printing a network setup page
• Step10: Configure for TCP/IP
  • Assigning a printer IP address
  • Verifying the IP settings
  • Configuring for PullPrinting
• Step11: Install drivers for network printing
  • Windows
  • Macintosh
  • UNIX/Linux
  • NetWare
• Step12: Using the publicationsCD
  • Viewing and using the CD contents
  • Congratulations!
• Statement of limited warranty