Lexmark Cs310 Owner S Manual User's Guide
2014-07-06
: Lexmark Lexmark-Lexmark-Cs310-Owner-S-Manual lexmark-lexmark-cs310-owner-s-manual lexmark pdf
Open the PDF directly: View PDF
Page Count: 199 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Safety information
- Learning about the printer
- Additional printer setup
- Installing internal options
- Installing hardware options
- Attaching cables
- Setting up the printer software
- Networking
- Preparing to set up the printer on an Ethernet network
- Installing the printer on an Ethernet network
- Preparing to set up the printer on a wireless network
- Connecting the printer to a wireless network using Wi-Fi Protected Setup
- Connecting the printer to a wireless network using the printer software
- Connecting the printer to a wireless network using the Embedded Web Server
- Verifying printer setup
- Loading paper and specialty media
- Paper and specialty media guide
- Printing
- Understanding the printer menus
- Saving money and the environment
- Securing the printer
- Maintaining the printer
- Managing the printer
- Clearing jams
- Troubleshooting
- Understanding the printer messages
- Adjusting color
- Bin full. Remove paper.
- Cannot collate large document [37]
- Change [paper source] to [custom string]
- Change [paper source] to [custom type name]
- Change [paper source] to [paper type] [paper size]
- Close door
- [Color] cartridge low [88.xy]
- [Color] cartridge nearly low [88.xy]
- [Color] cartridge very low, [x] estimated pages remain [88.xy]
- Complex page may misprint [39]
- Error reading USB drive. Remove USB.
- Incompatible tray [x] [59]
- Insert tray [x]
- Load [paper source] with [custom string]
- Load [paper source] with [custom type name]
- Load [paper source] with [paper size]
- Load [paper source] with [paper type] [paper size]
- Load Manual Feeder with [custom string]
- Load Manual Feeder with [custom type name]
- Load Manual Feeder with [paper size]
- Load Manual Feeder with [paper type] [paper size]
- Maintenance kit low [80.xy]
- Maintenance kit nearly low [80.xy]
- Maintenance kit very low, [x] estimated pages remain [80.xy]
- Memory full [38]
- Memory low, no Resource Save [35]
- Network error, port [x] [54]
- Network error, standard port [54]
- Non-Lexmark [color] [supply type], see User’s Guide [33.xy]
- Paper too short [34]
- Printer restart. Check last job.
- Rear USB port disabled [56]
- Reinstall missing or unresponsive [color] cartridge [31.xy]
- Reinstall missing or unresponsive [type] imaging kit [31.xy]
- Reload printed pages in Tray [x]
- Remove packaging material, check all
- Replace [color] cartridge, 0 estimated pages remain [88.xy]
- Replace [color] cartridge, printer region mismatch [42.xy]
- Replace defective [type] imaging kit [31.xy]
- Replace maintenance kit, 0 estimated pages remain [80.xy]
- Replace missing [color] cartridge [31.xy]
- Replace missing [type] imaging kit [31.xy]
- Replace missing waste toner bottle [82.xy]
- Replace [type] imaging kit, 0 estimated pages remain [84.xy]
- Replace unsupported [color] cartridge [32.xy]
- Replace unsupported [type] imaging kit [32.xy]
- Replace waste toner bottle [82.xy]
- Supply needed to complete job
- Too many trays. Remove some. [58]
- [Type] imaging kit low [84.xy]
- [Type] imaging kit nearly low [84.xy]
- [Type] imaging kit very low, [x] estimated pages remain [84.xy]
- Waste toner bottle nearly full [82.xy]
- Weblink server not set up. Contact system administrator.
- Solving printer problems
- Solving print problems
- Printing problems
- Print quality problems
- Characters have jagged or uneven edges
- Clipped pages or images
- Gray background on prints
- Horizontal voids appear on prints
- Incorrect margins on prints
- Paper curl
- Print irregularities
- Print is too dark
- Print is too light
- Printer is printing blank pages
- Printer is printing solid black pages
- Repeating defects appear on prints
- Shadow images appear on prints
- Skewed print
- Streaked horizontal lines appear on prints
- Streaked vertical lines appear on prints
- Toner fog or background shading appears on prints
- Toner rubs off
- Toner specks appear on prints
- Transparency print quality is poor
- Uneven print density
- Vertical voids appear on prints
- Color quality problems
- Embedded Web Server does not open
- Contacting customer support
- Understanding the printer messages
- Notices
- Product information
- Edition notice
- GOVERNMENT END USERS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- Licensing notices
- Noise emission levels
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Product disposal
- Static sensitivity notice
- ENERGY STAR
- Temperature information
- Información de la energía de México
- Laser notice
- Laser advisory label
- Power consumption
- 日本の VCCI 規定
- European Community (EC) directives conformity
- Regulatory notices for wireless products
- Modular component notice
- Exposure to radio frequency radiation
- Industry Canada (Canada)
- Notice to users in the European Union
- STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...
- Patent acknowledgment
- Index