Lexmark X363 Owner S Manual User's Guide
Lexmark-Lexmark-X264-Owner-S-Manual lexmark-lexmark-x264-owner-s-manual
Lexmark-Lexmark-X364-Owner-S-Manual lexmark-lexmark-x364-owner-s-manual
gd2 v9558858_en
2014-07-06
: Lexmark Lexmark-Lexmark-X363-Owner-S-Manual lexmark-lexmark-x363-owner-s-manual lexmark pdf
Open the PDF directly: View PDF
Page Count: 235 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Safety information
- Learning about the printer
- Additional printer setup
- Minimizing your printer's environmental impact
- Loading paper and specialty media
- Paper and specialty media guidelines
- Printing
- Copying
- Making copies
- Copying photos
- Copying on specialty media
- Customizing copy settings
- Copying from one size to another
- Making copies using paper from a selected tray
- Copying on both sides of the paper (duplexing)
- Reducing or enlarging copies
- Making a copy lighter or darker
- Adjusting copy quality
- Collating copies
- Placing separator sheets between copies
- Copying multiple pages onto a single sheet
- Pausing the current print job to make copies
- Placing an overlay message on each page
- Canceling a copy job
- Improving copy quality
- E-mailing
- Faxing
- Getting the printer ready to fax
- Initial fax setup
- Choosing a fax connection
- Connecting to an analog telephone line
- Connecting to a DSL service
- Connecting to a PBX or ISDN system
- Connecting to a distinctive ring service
- Connecting the printer and a telephone or answering machine to the same telephone line
- Connecting to an adapter for your country or region
- Connecting to a computer with a modem
- Setting the outgoing fax name and number
- Setting the date and time
- Turning daylight saving time on or off
- Sending a fax
- Creating shortcuts
- Using shortcuts and the address book
- Customizing fax settings
- Canceling an outgoing fax
- Understanding fax options
- Improving fax quality
- Getting the printer ready to fax
- Scanning to a computer or flash drive
- Understanding printer menus
- Maintaining the printer
- Administrative support
- Clearing jams
- Troubleshooting
- Solving basic printer problems
- Printer control panel display is blank or displays only diamonds
- Understanding printer messages
- Answering
- Call complete
- Close front door
- Defragmenting Flash DO NOT POWER OFF
- DO NOT TOUCH Reading flash data DO NOT POWER OFF
- Fax failed
- Fax Station Name not set up
- Fax Station Number not set up
- Formatting Flash DO NOT POWER OFF
- Hex Trace
- Invalid Engine Code
- Invalid Network Code
- Line busy
- Load manual feeder with <x>
- Load <src> with <x>
- Memory full, cannot send faxes
- Network/Network <x>
- No analog phone line
- No answer
- No dial tone
- Power Saver
- Programming Engine Code DO NOT POWER OFF
- Programming flash DO NOT POWER OFF
- Programming System Code DO NOT POWER OFF
- Queued for sending
- Remove packaging material, check <x>
- Remove paper from standard output bin
- Scanner ADF Cover Open
- Scanner Jam Access Cover Open
- Toner is low
- Unsupported USB device, please remove
- Unsupported USB hub, please remove
- USB/USB <x>
- Waiting
- Waiting for redial
- 31.yy Replace defective or missing cartridge
- 34 Short paper
- 35 Insufficient memory to support Resource Save feature
- 37 Insufficient memory for Flash Memory Defragment operation
- 37 Insufficient memory to collate job
- 38 Memory full
- 39 Complex page, some data may not have printed
- 51 Defective flash detected
- 52 Not enough free space in flash memory for resources
- 53 Unformatted flash detected
- 54 Network <x> software error
- 54 Standard network software error
- 56 Standard USB port disabled
- 58 Too many flash options installed
- 58 Too many trays attached
- 84 PC Kit life warning
- 84 Replace PC Kit
- 88.yy Cartridge is low
- 200.yy Paper jam
- 201.yy Paper jam
- 202.yy Paper jam
- 231.yy Paper jam
- 233.yy Paper jam
- 234.yy Paper jam
- 235.yy Paper jam
- 24x.yy Paper jam
- 251.yy Paper jam
- 290–292 ADF Scanning Jams
- 293 Paper Missing
- 293.02 Flatbed Cover Open
- 294 ADF Jam
- 840.01 Scanner Disabled
- 840.02 Scanner Auto Disabled
- Solving printing problems
- Jobs do not print
- Make sure the printer is ready to print
- Check to see if the standard exit bin is full
- Check to see if the paper tray is empty
- Make sure the correct printer software is installed
- Make sure the internal print server is installed properly and working
- Make sure you are using a recommended printer cable
- Make sure printer cables are securely connected
- Multiple-language PDFs do not print
- Job takes longer than expected to print
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Jobs do not print
- Solving copy problems
- Copier does not respond
- Scanner unit does not close
- Poor copy quality
- Check the display for error messages
- The toner may be low
- The scanner glass may be dirty
- The copy is too light or too dark
- Check the quality of the original document
- Check the document placement
- Unwanted toner is in the background
- Patterns (moiré) appear in the output
- Text is light or disappearing
- The output appears washed out or overexposed
- The print is skewed
- Partial document or photo copies
- Unable to pause print job to make copies
- Solving scanner problems
- Solving fax problems
- Caller ID is not shown
- Cannot send or receive a fax
- Check the display for error messages
- Check the power
- Check the printer connections
- Check the telephone wall jack
- Review this digital phone service checklist
- Check for a dial tone
- Temporarily disconnect other equipment
- Check for jams
- Temporarily disable Call Waiting
- Voice Mail service may be interfering with the fax transmission
- The printer memory may be full
- Can send but not receive faxes
- Can receive but not send faxes
- Received fax has poor print quality
- Solving option problems
- Solving paper feed problems
- Solving print quality problems
- Isolating print quality problems
- Blank pages
- Characters have jagged or uneven edges
- Clipped images
- Gray background
- Ghost images
- Incorrect margins
- Paper curl
- Print is too dark
- Print is too light
- Skewed print
- Toner fog or background shading appears on the page
- Toner rubs off
- Toner specks
- Transparency print quality is poor
- Streaked horizontal lines
- Streaked vertical lines
- Solid black or white streaks appear on transparencies or paper
- Embedded Web Server does not open
- Contacting Customer Support
- Notices
- Product information
- Edition notice
- UNITED STATES GOVERNMENT RIGHTS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- Noise emission levels
- Temperature information
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Static sensitivity notice
- ENERGY STAR
- Mercury statement
- Laser notice
- Laser advisory label
- Power consumption
- European Community (EC) directives conformity
- Regulatory notices for telecommunication terminal equipment
- Notice to users of the US telephone network: FCC requirements
- South Africa telecommunications notice
- Notice to users of the Canadian telephone network
- Notice to users of the New Zealand telephone network
- Notice to Users in the European Union
- Regulatory notices for wireless products
- Exposure to radio frequency radiation
- Notice to users in Brazil
- Industry Canada (Canada)
- Taiwan NCC RF notice statement
- Notice to users in the European Union
- Statement of Limited Warranty
- LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS
- Index