Lexmark Page Plus Solution X940E Users Manual User's Guide
X945E to the manual 611a6aa4-e844-f274-f1ed-59aa568fe05f
2015-01-23
: Lexmark Lexmark-Page-Plus-Solution-X940E-Users-Manual-269136 lexmark-page-plus-solution-x940e-users-manual-269136 lexmark pdf
Open the PDF directly: View PDF
Page Count: 272 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Safety information
- Learning about the printer
- Installing options
- Loading paper and specialty media
- Paper and specialty media guide
- Copying
- Making copies
- Copying photos
- Copying on specialty media
- Customizing copy settings
- Copying from one size to another
- Making copies using paper from a selected tray
- Copying a document that contains mixed paper sizes
- Copying on both sides of the paper (duplexing)
- Reducing or enlarging copies
- Adjusting copy quality
- Collating copies
- Placing separator sheets between copies
- Copying multiple pages onto a single sheet
- Creating a custom job (job build)
- Job interrupt
- Placing information on copies
- Canceling a copy job
- Understanding the copy screens and options
- Improving copy quality
- E-mailing
- Faxing
- Getting the printer ready to fax
- Choosing a fax connection
- Using an RJ11 adapter
- Connecting directly to a telephone wall jack in Germany
- Connecting to a telephone
- Connecting to an answering machine
- Connecting to a computer with a modem
- Setting the outgoing fax name and number
- Setting the date and time
- Turning daylight saving time on or off
- Sending a fax
- Creating shortcuts
- Using shortcuts and the address book
- Customizing fax settings
- Canceling an outgoing fax
- Understanding fax options
- Improving fax quality
- Holding and forwarding faxes
- Getting the printer ready to fax
- Scanning to an FTP address
- Scanning to a computer or USB flash memory device
- Printing
- Clearing jams
- Understanding printer menus
- Understanding printer messages
- List of status and error messages
- Answering
- Bin <x> Full
- Busy
- Calibrating
- Call complete
- Cancel not available
- Canceling
- Change <src> to <x>
- Check <src> guides
- Clearing job accounting statistics
- Close cover <x>
- Close door <x>
- Connect <x>bps
- Copies
- Defragmenting Flash DO NOT POWER OFF
- Delete/Delete all/Delete all confidential jobs
- Deleting
- Dialing
- Disk Corrupted. Reformat?
- Disk recovery x/y XX% DO NOT POWER OFF
- Empty hole punch box
- Encrypting disk x/y XX% DO NOT POWER OFF
- Enter PIN
- Enter PIN to lock
- Error reading USB drive
- Fax failed
- Flushing buffer
- Formatting Disk x/y XX% DO NOT POWER OFF
- Formatting Flash DO NOT POWER OFF
- Incorrect orientation
- Insert hole punch box
- Insert Tray <x>
- Internal System Error, Reload Bookmarks
- Internal System Error, Reload Security Certificates
- Invalid Engine Code
- Invalid file format
- Invalid PIN
- Invalid Network Code
- Job stored for delayed transmission
- Line busy
- Load manual feeder with <x>
- Load staples <x>
- Load <src> with <x>
- Menus are disabled
- Network/Network <x>
- No answer
- No dial tone
- No held jobs
- No jobs to cancel
- No recognized file types
- Power Saver
- Printer locked, enter PIN to unlock
- Printing
- Programming disk DO NOT POWER OFF
- Programming flash DO NOT POWER OFF
- Programming System Code DO NOT POWER OFF
- Queued for sending
- Reading USB drive DO NOT REMOVE
- Ready
- Receive complete
- Receiving page <n>
- Remote Management Active DO NOT POWER OFF
- Remove paper from all bins
- Remove paper from standard bin
- Remove paper from bin <x>
- Replace all originals if restarting job.
- Resetting the printer
- Restore Held Jobs?
- Restoring Factory Defaults
- Restoring Held Job(s) x/y
- Scan Document Too Long
- Scanner ADF Cover Open
- Sending page <n>
- Serial <x>
- Set clock
- Some held jobs were not restored
- Some held jobs will not be restored
- Standard Bin Full
- Staples <x> empty or misfed
- Staples <x> low or missing
- System busy, preparing resources for job.
- System busy, preparing resources for job. Deleting held job(s).
- Submitting Selection
- Tray <x> Empty
- Tray <x> Low
- Tray <x> Missing
- USB/USB <x>
- Waiting
- Waiting for redial
- 1565 Emul Error Load Emul Option
- 31 Missing or defective <color> cartridge
- 32 Replace unsupported <color> cartridge
- 34 Incorrect paper size, check <src>
- 34 Short paper
- 35 Insufficient memory to support Resource Save feature
- 37 Insufficient memory to collate job
- 37 Insufficient memory for Flash Memory Defragment operation
- 37 Insufficient memory, some held jobs will not be restored
- 38 Memory full
- 39 Page is too complex to print
- 40 <color> invalid refill, change cartridge
- 50 PPDS font error
- 51 Defective flash detected
- 52 Flash full
- 53 Unformatted flash detected
- 54 Serial option <x> error
- 54 Standard network software error
- 54 Network <x> software error
- 55 Unsupported option in slot <x>
- 56 Parallel port <x> disabled
- 56 Serial port <x> disabled
- 56 Standard USB port disabled
- 56 USB port <x> disabled
- 57 Configuration change, held jobs were not restored
- 58 Too many disks installed
- 58 Too many flash options installed
- 58 Too many trays attached
- 61 Remove defective hard disk
- 62 Disk full
- 63 Unformatted disk
- 80 Scheduled maintenance <x>
- 82 Replace waste toner box
- 82 Waste toner box nearly full
- 82 Waste toner box missing
- 84 Black pc unit life warning
- 84 Color pc unit life warning
- 84 <color> pc unit missing
- 84 Replace black pc unit
- 84 Replace color pc units
- 84 Unsupported <color> pc unit
- 88 <color> toner low
- 88 Replace <color> toner
- 200–289.yy paper jam
- 289 Staple error <x>
- 290-295.yy scanner jam
- 900–999 Service <message>
- List of status and error messages
- Maintaining the printer
- Administrative support
- Adjusting the brightness of the display
- Disabling control panel menus
- Adjusting Power Saver
- Restoring the factory default settings
- Encrypting the printer hard disk
- Locking the control panel menus using the Embedded Web Server
- Locking the entire printer
- Modifying confidential print settings
- Supporting IPSec
- Supporting SNMPv3
- Using 802.1x authentication
- Creating an administrative password
- Using Secure mode
- Troubleshooting
- Checking an unresponsive printer
- Door A will not shut properly
- Solving printing problems
- Multiple-language PDFs do not print
- Control panel display is blank or displays only diamonds
- Error message about reading USB drive appears
- Jobs do not print
- Confidential and other held jobs do not print
- Job takes longer than expected to print
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Solving copy problems
- Solving scanner problems
- Solving fax problems
- Solving option problems
- Solving paper feed problems
- Solving print quality problems
- Isolating print quality problems
- Blank pages
- Characters have jagged or uneven edges
- Clipped images
- Dark lines
- Gray background
- Incorrect margins
- Light colored line, white line, or incorrectly colored line
- Paper curl
- Print irregularities
- Repeating defects
- Skewed print
- Print is too light
- Print is too dark
- Solid color pages
- Toner fog or background shading appears on the page
- Toner rubs off
- Toner specks
- Transparency print quality is poor
- Uneven print density
- Solving color quality problems
- Contacting Customer Support
- Notices
- Edition notice
- UNITED STATES GOVERNMENT RIGHTS
- Trademarks
- Conventions
- Federal Communications Commission (FCC) compliance information statement
- Exposure to radio frequency radiation
- Industry Canada notices
- Radio interference notice
- European Community (EC) directives conformity
- India emissions notice
- Noise emission levels
- Temperature information
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Product disposal
- Federal Communications Commission (FCC) compliance information statement
- Notice to users of the Canadian telephone network
- Notice to users of the New Zealand telephone network
- South Africa telecommunications notice
- ENERGY STAR
- Laser notice
- Laser advisory label
- Power consumption
- Statement of Limited Warranty
- Index