Lexmark N8052 Lexmark N8052 User Manual Notices
Lexmark International Inc Lexmark N8052 Notices
Lexmark >
User Manual Notices
Wireless Notice
In some environments, the use of wireless devices may be restricted. Such restrictions
may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc. If
you are uncertain of the policy that applies to the use of this device, please ask for
authorization to use it prior to turning it on.
FCC Statement
Lexmark International Inc. declares that this device, Lexmark MarkNet N8050, Model
Number 4034-850, complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any questions regarding this declaration should be directed to:
Director of Lab Operations
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232-3000
This product has been tested and complies with the specifications for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used according to the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment or devices
• Connect the equipment to an outlet other than the receiver's
• Consult a dealer or an experienced radio/TV technician for assistance
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment
not expressly approved by the manufacturer may cause harmful interference and void
your authority to operate this equipment. Use of supplied data cable is required to comply
with the Class B limits of Part 15 of the FCC Rules.
This product does not contain any user serviceable components and is to be used with
approved antennas only. Any product changes or modifications will invalidate all
applicable regulatory certifications and approvals.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
Industry Canada (Canada)
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada specification RSS-210. Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired
operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.
This device has been designed to operate with an antenna having a maximum gain of 4
dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
The installer of this radio equipment must ensure that the antenna is located or pointed
such that it does not emit RF fields in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-
sc.gc.ca/rpb.
The term “IC:” before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
Avis de conformité aux normes d’Industrie Canada
Cet appareil numérique de Classe B répond aux normes canadiennes sur les équipements
produisant des interférences (Canadian Interference-Causing Equipment Regulations).
Cet appareil numérique de Classe B est conforme à la norme canadienne ICES-003.
Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement
est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute
interférence reçue, y compris celles risquant d'altérer son fonctionnement.
Pour réduire les interférences radio potentielles avec les dispositifs d'autres utilisateurs, le
type d'antenne et son gain doivent être choisis de façon à ce que la puissance isotrope
rayonnée équivalente (PIRE) ne soit pas supérieure à la puissance nécessaire pour une
bonne communication.
Cet appareil a été conçu pour fonctionner avec une antenne d'un gain maximum de 4 dBi.
En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain
supérieur est strictement interdite.
L'impédance d'antenne requise est de 50 ohms.
Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet
appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection
optimale.
Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet
d'une licence.
L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et
dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour
l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que
vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb.
Le terme « IC »
précédant le numéro de d'accréditation/inscription signifie simplement que le produit est
conforme aux spécifications techniques d'Industry Canada.
Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE
Directive) in languages of the European Community – Applies to the Lexmark
MarkNet N8050, Model Number 4034-85E.
English Hereby, Lexmark International Inc., declares that this Radio LAN Device
is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Finnish Valmistaja Lexmark International Inc. vakuuttaa täten että Radio LAN
Device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Hierbij verklaart Lexmark International Inc. dat het toestel Radio LAN
Device in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG
Dutch
Bij deze verklaart Lexmark International Inc. dat deze Radio LAN Device
voldoet aan de essentiële eisen en aan de overige relevante bepalingen van
Richtlijn 1999/5/EC.
Par la présente Lexmark International Inc. déclare que l'appareil Radio
LAN Device est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE
French
Par la présente, Lexmark International Inc. déclare que ce Radio LAN
Device est conforme aux exigences essentielles et aux autres dispositions
de la directive 1999/5/CE qui lui sont applicables
Swedish Härmed intygar Lexmark International Inc. att denna Radio LAN Device
står I överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Danish Undertegnede Lexmark International Inc. erklærer herved, at følgende
udstyr Radio LAN Device overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF
Hiermit erklärt Lexmark International Inc., dass sich dieser/diese/dieses
Radio LAN Device in Übereinstimmung mit den grundlegenden
Anforderungen und den anderen relevanten Vorschriften der Richtlinie
1999/5/EG befindet". (BMWi)
German
Hiermit erklärt Lexmark International Inc. die Übereinstimmung des
Gerätes Radio LAN Device mit den grundlegenden Anforderungen und
den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien)
Greek ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Lexmark International Inc. ∆ΗΛΩΝΕΙ ΟΤΙ Radio
LAN Device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ
ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ
Italian Con la presente Lexmark International Inc. dichiara che questo Radio LAN
Device è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Spanish Por medio de la presente Lexmark International Inc. declara que el Radio
LAN Device cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE
Portuguese Lexmark International Inc. declara que este Radio LAN Device está
conforme com os requisitos essenciais e outras provisões da Directiva
1999/5/CE.
Czech Lexmark International Inc. tímto prohlašuje, že tento výrobek s typovým
oznacením Radio LAN Device vyhovuje základním požadavkum a dalším
ustanovením smernice 1999/5/ES, které se na tento výrobek vztahují.
Hungarian Lexmark International Inc. ezennel kijelenti, hogy ez a Radio LAN Device
termék megfelel az alapveto követelményeknek és az 1999/5/EC irányelv
más vonatkozó ndelkezéseinek.
Estonian Käesolevaga kinnitab Lexmark International Inc. seadme Radio LAN
Device vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
Latvian Ar šo Lexmark International Inc. deklarē, ka Radio LAN Device atbilst
Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lithuanian Lexmark International Inc. deklaruoja, kad irenginys Radio LAN Device
tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas sios
direktyvos nuostatas
Maltese Hawnhekk, Lexmark International Inc., jiddikjara li dan Radio LAN
Device jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC
Polish Lexmark International Inc., deklarujemy z pelna odpowiedzialnoscia, ze
wyrób Radio LAN Device spelnia podstawowe wymagania i odpowiada
warunkom zawartym w dyrektywie 1999/5/EC
Slovak Lexmark International Inc. týmto vyhlasuje, že tento Radio LAN Device
vyhovuje technickým požiadavkám a ïalším ustanoveniam smernice
1999/5/ES, ktoré sa na tento výrobok vzahujú.
Slovenian S tem dokumentom Lexmark International Inc., izjavlja, da je ta Radio
LAN Device v skladu z bistvenimi zahtevami in z drugimi ustreznimi
dolocili Direktive 1999/5/EC
This product is in conformity with the protection requirements of EC Council directives
89/336/EEC, 73/23/EEC, and 1999/5/EC on the approximation and harmonization of the
laws of the Member States relating to electromagnetic compatibility and safety of
electrical equipment designed for use within certain voltage limits and on radio
equipment and telecommunications terminal equipment. The Official Declaration of
Conformity may be viewed at www.lexmark.com/rtte.
Compliance is indicated by the following CE marking:
The Alert sign indicates that there are restrictions within certain member states. The
following restrictions apply: The product is certified for indoor use only. Outdoor usage
may require licensing.