Lexmark N8052 Lexmark N8052 User Manual Notices
Lexmark International Inc Lexmark N8052 Notices
Lexmark >
User Manual Notices
Wireless Notice In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc. If you are uncertain of the policy that applies to the use of this device, please ask for authorization to use it prior to turning it on. FCC Statement Lexmark International Inc. declares that this device, Lexmark MarkNet N8050, Model Number 4034-850, complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any questions regarding this declaration should be directed to: Director of Lab Operations Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000 This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by the manufacturer may cause harmful interference and void your authority to operate this equipment. Use of supplied data cable is required to comply with the Class B limits of Part 15 of the FCC Rules. This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Industry Canada (Canada) This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations. This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. This device has been designed to operate with an antenna having a maximum gain of 4 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hcsc.gc.ca/rpb. The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met. Avis de conformité aux normes d’Industrie Canada Cet appareil numérique de Classe B répond aux normes canadiennes sur les équipements produisant des interférences (Canadian Interference-Causing Equipment Regulations). Cet appareil numérique de Classe B est conforme à la norme canadienne ICES-003. Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement. Pour réduire les interférences radio potentielles avec les dispositifs d'autres utilisateurs, le type d'antenne et son gain doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (PIRE) ne soit pas supérieure à la puissance nécessaire pour une bonne communication. Cet appareil a été conçu pour fonctionner avec une antenne d'un gain maximum de 4 dBi. En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite. L'impédance d'antenne requise est de 50 ohms. Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb. Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada. Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive) in languages of the European Community – Applies to the Lexmark MarkNet N8050, Model Number 4034-85E. English Hereby, Lexmark International Inc., declares that this Radio LAN Device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Valmistaja Lexmark International Inc. vakuuttaa täten että Radio LAN Device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Dutch Hierbij verklaart Lexmark International Inc. dat het toestel Radio LAN Device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG Bij deze verklaart Lexmark International Inc. dat deze Radio LAN Device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. French Par la présente Lexmark International Inc. déclare que l'appareil Radio LAN Device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Par la présente, Lexmark International Inc. déclare que ce Radio LAN Device est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables Swedish Härmed intygar Lexmark International Inc. att denna Radio LAN Device står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Danish Undertegnede Lexmark International Inc. erklærer herved, at følgende udstyr Radio LAN Device overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF German Hiermit erklärt Lexmark International Inc., dass sich dieser/diese/dieses Radio LAN Device in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklärt Lexmark International Inc. die Übereinstimmung des Gerätes Radio LAN Device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) Greek ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Lexmark International Inc. ∆ΗΛΩΝΕΙ ΟΤΙ Radio LAN Device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ Italian Con la presente Lexmark International Inc. dichiara che questo Radio LAN Device è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Spanish Por medio de la presente Lexmark International Inc. declara que el Radio LAN Device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE Portuguese Lexmark International Inc. declara que este Radio LAN Device está conforme com os requisitos essenciais e outras provisões da Directiva 1999/5/CE. Czech Lexmark International Inc. tímto prohlašuje, že tento výrobek s typovým oznacením Radio LAN Device vyhovuje základním požadavkum a dalším ustanovením smernice 1999/5/ES, které se na tento výrobek vztahují. Hungarian Lexmark International Inc. ezennel kijelenti, hogy ez a Radio LAN Device termék megfelel az alapveto követelményeknek és az 1999/5/EC irányelv más vonatkozó ndelkezéseinek. Estonian Käesolevaga kinnitab Lexmark International Inc. seadme Radio LAN Device vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Ar šo Lexmark International Inc. deklarē, ka Radio LAN Device atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Latvian Lithuanian Lexmark International Inc. deklaruoja, kad irenginys Radio LAN Device tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas sios direktyvos nuostatas Maltese Hawnhekk, Lexmark International Inc., jiddikjara li dan Radio LAN Device jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC Polish Lexmark International Inc., deklarujemy z pelna odpowiedzialnoscia, ze wyrób Radio LAN Device spelnia podstawowe wymagania i odpowiada warunkom zawartym w dyrektywie 1999/5/EC Lexmark International Inc. týmto vyhlasuje, že tento Radio LAN Device vyhovuje technickým požiadavkám a ïalším ustanoveniam smernice 1999/5/ES, ktoré sa na tento výrobok vz ahujú. S tem dokumentom Lexmark International Inc., izjavlja, da je ta Radio LAN Device v skladu z bistvenimi zahtevami in z drugimi ustreznimi dolocili Direktive 1999/5/EC Slovak Slovenian This product is in conformity with the protection requirements of EC Council directives 89/336/EEC, 73/23/EEC, and 1999/5/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment. The Official Declaration of Conformity may be viewed at www.lexmark.com/rtte. Compliance is indicated by the following CE marking: The Alert sign indicates that there are restrictions within certain member states. The following restrictions apply: The product is certified for indoor use only. Outdoor usage may require licensing.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2005:06:09 11:01:13 Producer : Acrobat Distiller 4.05 for Windows Modify Date : 2005:06:10 15:15:13-04:00 Page Count : 6EXIF Metadata provided by EXIF.tools