Lg 32500H Users Manual SAC30708006 1

42PG65C 32lg500h-owner-manual02

42PX8DC to the manual 52d06e2f-cf9b-443d-a2ea-cd2b46b434fc

: Lg Lg-32500H-Users-Manual-227327 lg-32500h-users-manual-227327 lg pdf

Open the PDF directly: View PDF .
Page Count: 90

Download
Open PDF In Browser	View PDF

LCD TV PLASMA TV
OWNER’S MANUAL
LCD TV MODELS
32LC5DC
32LC50CS
32LC5DCS
32LC50CB
32LX50C
32LC5DCB
37LC5DC
32LX50CS
37LC50C
37LC5DCB
37LC5DC1
37LC50CB
42LC5DC
42LB50C
42LC50C
32LX5DC
32LX5DCS
32LG500H
37LG500H
42LB5DC
42LG500H
32LC50C

PLASMA TV MODEL
42PX8DC
42PG65C
42PG60C

Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.

www.lgcommercial.com

WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.

WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point of the cable
entry as practical.

A

FCC NOTICE
Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.

CAUTION
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

SAFETY INSTRUCTION
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

1

2

6

Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

7

Only use attachments/accessories specified by
the manufacturer.

8

Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

9

Unplug this apparatus during lighting storms or
when unused for long periods of time.

10

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

Do not use this apparatus near water.

Clean only with dry cloth.

3

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

4

Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.

5

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

1

SAFETY INSTRUCTION

2

11

Never touch this apparatus or antenna during a
thunder or lighting storm.

12

When mounting a TV on the wall, make sure not to
install the TV by the hanging power and signal
cables on the back of the TV.

13

Do not allow an impact shock or any objects to fall
into the product, and do not drop onto the screen
with something.

14

CAUTION concerning the Power Cord :
It is recommend that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the same
AC power outlet as this could result in fire or electric shock.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized servicer. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord plugged
in. Do not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug the
TV.

15

WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain, moisture
or other liquids. Do not touch the TV with wet
hands. Do not install this product near flammable
objects such as gasoline or candles or expose the
TV to direct air conditioning.

16

Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).

17

GROUNDING
Ensure that you connect the earth ground wire to
prevent possible electric shock. (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grouned AC outlet) If grounding
methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker

18

DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The plug
must remain readily operable.

19

Keep the product away from direct sunlight.

20

ANTENNAS
Outdoor antenna grounding
If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
come in contact with such power lines or circuits as
death or serious injury can occur.
Be sure the antenna system is grounded so as to provide some protection against voltage surges and
built-up static charges.
Section 810 of the National Electrical Code (NEC) in
the U.S.A. provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Ground Clamp

Cleaning
When cleaning, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not
spray water or other liquids directly on the TV as
electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene.

22

Moving
Make sure the product is turned off, unplugged
and all cables have been removed. It may take 2 or
more people to carry larger TVs. Do not press
against or put stress on the front panel of the TV.

23

Ventilation
Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in
excessively dusty places.

24

If you smell smoke or other odors coming from the
TV or hear strange sounds, unplug the power cord
contact an authorized service center.

25

Do not press strongly upon the panel with a hand or
sharp object such as nail, pencil or pen, or make a
scratch on it.

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Electric Service
Equipment

21

Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)

NEC: National Electrical Code

3

CONTENTS
WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . A
SAFETY INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PREPARATION
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . 12
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Attaching the TV to a Desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 20

EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

WATCHING TV / CHANNEL CONTROL
Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
- Auto Scan (EZ Scan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
- Add / Delete Channel (Manual Scan) . . . . . . . . . 37
- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
DTV Signal Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Channel Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

PICTURE CONTROL
Watching DW (Double Window) . . . . . . . . . . . . . . . . . . . . . . . 41
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 43
Preset Picture Settings
- EZ Picture - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
- Color Tone - Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Manual Picture Adjustment
- EZ Picture - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
- Color Tone - User Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
XD - Picture Improvement Technology . . . . . . . . . . . . . 49
Advanced - Cinema Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Advanced - Black (Darkness) Level . . . . . . . . . . . . . . . . . . . 51

4

Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Image Sticking Minimization( ISM) Method . . . . . . . . . . . . . 53

SOUND & LANGUAGE CONTROL
Auto Volume Leveler (EZ SoundRite) . . . . . . . . . . . . . . . . 54
Preset Sound Setting (EZ Sound) . . . . . . . . . . . . . . . . . . . . . 55
Sound Setting Adjustment - User Mode . . . . . . . . . . . 56
Balance Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
On-Screen Menus Language Selection . . . . . . . . . . . . . . 61
Caption/Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
- Analog Broadcasting System Captions . . . . . . . 62
- Digital Broadcasting System Captions . . . . . . . . 63
Caption Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

TIME SETTING
Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

SCREEN ADJUSTMENT
Auto Configure (RGB(PC) Mode only) . . . . . . . . . . . . . 70
Manual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Selecting XGA Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Initializing (Reset to Original Factory Settings) . 73

PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
- Setting up Your Password . . . . . . . . . . . . . . . . . . . . . . . . . 74
- Set Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
- Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
- Movie Rating (MPAA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
- Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
- TV Rating Children & General . . . . . . . . . . . . . . . . . . . 78
- TV Rating English & French . . . . . . . . . . . . . . . . . . . . . . . 79

APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Programming the Remote Control . . . . . . . . . . . . . . . . . . . . 84
Set ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

FEATURES OF THIS TV
On Disposal
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general
household waste.
c. Disposal of this product must be carried out in
accordance to the regulations of your local
authority.

FOR LCD TV

PREPARATION

If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on. This is normal,
there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so
may produce some temporary distortion effects on
the screen.

PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
PU
TV T

INP

MU

PIP
EZ

LT

UT

PO
WE

R

MO

TV

I

DE

DV

TV

PIP
PIC
CH PO
VC
STEZ SOU - PIP W
R
B ND
CH ER
RA
+ PIP
TIO
SW
INPUDV
AP
T D
INF
CC
VCO

INP

D

R
UT

INP
TV

CC
XIT

INP

ME
NU

EN RA
TE TIO
R
SA

RE
TURN ENTE
R
ME
NU

MU

P

LT

PIC

TIM

IT

PIP

CH
-

PIP

PIP

SA

P

SWA

CD Manual

PIP

INPU

RA
TIO
SA

EN
TER

VO

L

P

TIM
ER

CH

MU
TE

PAG

1

E

1.5V 1.5V

2

4
CH
+

DE

ME

NU

or

FLASHB
K

P

http://www.lgusa.com
www.lg.ca

P
A
G
E

9

PIP

Owner’s Manual,
Setup & Operation Guide
for Commercial Mode

3
6

0

Copyright© 2007 LGE,
All Rights Reserved.

CHE
TE

MO

VC
R
PIP
CH
+ PIP
SW
INPU
AP
T
INF
O

CC

EX

PAG

MU

2
5
8

R

TV

-

ER
CH

1
4
7

Owner's Manual

PO
WE

D

CH

ND

i

LCD TV PLASMA TV

UT

DV
PIP
EZ SOU

INFO

VO
L

UT

I

PIP
EZ

3

5

7

6

8

T

9

0
FLAS
BACK H

Remote Control,
Batteries

Power Cord

* Slightly wipe stained spot on the exterior only
with the polishing cloth for the product exterior if there is stain or fingerprint on surface of
the exterior.

Polishing Cloth
This feature is not available
for all models.

* Do not wipe roughly when removing stain.
Please be cautions of that excessive pressure
may cause scratch or discoloration.

5

PREPARATION
LCD TV model only
Option Extras

x2
M4xL22

Torx plus
Star head screw
(Refer to p.7, 15)

Protective Bracket and Bolt for
Power Cord

PREPARATION

(This feature is not available for all models.)

D-sub 15 pin Cable

(Refer to P.12-13, 15)
Only 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C models

Cable Holder
1-Bolt for fixing the
Cable Management
Cable Holder
(Refer to p.12) (Refer to p.12-13)
(Refer to p.12-13)

4-Bolts for stand
assembly
(Refer to p.16)
Only 32/37LC5DC*,
32/37LC50C* models

Only 32/37/42LG500H models

x4

or

x4

Bolts for stand assembly Screw for stand fixing Protection Cover
(Refer to P.15)
(Refer to P.19)

Cable Holder

Plasma TV models only

75 ohm Round Cable
(Except 42PG60C/65C)

D-sub 15 Pin Cable
(Except 42PG60C/65C)

Only 42PG65C model
x4

Cable Management Clip

6

Bolts for stand
assembly
(Refer to P.14)

Cable Holder
(Except 42PX8DC)

Plug in type
holder

FRONT PANEL CONTROLS
■

Here shown may be somewhat different from your TV.

32/37/42LC5DC*,32/37/42LC50C*, 42LB5DC, 42LB50C

PREPARATION

CH

CHANNEL Buttons

VOL

VOLUME Buttons

ENTER

ENTER Button

MENU

MENU Button

INPUT

INPUT Button
POWER Button

Remote Control Sensor

Power/Standby Indicator
Illuminates red when the TV is in standby mode.
Illuminates green when the TV is switched on.

x4
Tighten the stand with the
four screws (provided as parts
of the TV).

or
x2

Tighten the two of these four screws and
x 2 the two Torx plus star head screws (provided as parts of the TV) to secure the TV.
Tighten the two Torx plus star head screws
with a star head driver bit (not provided
as parts of the TV).

7

PREPARATION
32LX5DC*, 32LX50C*

PREPARATION

Remote Control Sensor
Power/Standby
Indicator
Illuminates red when the
TV is in standby mode.
Illuminates green when
the TV is switched on.

CH

VOL

ENTER

MENU

INPUT

ON/OFF

ON/OFF Button
INPUT Button
MENU Button
ENTER Button
VOLUME Buttons
CHANNEL Buttons

32/37/42LG500H

CH

Intelligent Sensor
Adjusts picture according to the surrounding
conditions
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is switched on.

VOL

CHANNEL
Buttons

VOLUME
Buttons

ENTER

ENTER Button
MENU

MENU Button
INPUT

INPUT Button
Remote Control Sensor
POWER Button

8

42PX8DC

INPUT

ENTER

PREPARATION

This TV’s stand is sold, separately.

INPUT

Remote Control Sensor
Power/Standby
Indicator
Illuminates red when the
TV is in standby mode.
Illuminates green when
the TV is switched on.

MENU

ENTER

VOL

CH

POWER Button
INPUT Button
MENU Button
ENTER Button
VOLUME Buttons
CHANNEL Buttons

42PG60C, 42PG65C

Remote Control Sensor
POWER Button

Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the set is switched
on.
INPUT

ENTER

S t a n d (Only 42PG65C model)

INPUT

INPUT

MENU

INPUT
Button

MENU

VOL

ENTER

MENU

INPUT

ENTER

ENTER

MENU
Button

VOL

VOL

ENTER
Button

CH
CH

CH

VOLUME (-,+)
Buttons

CHANNEL (E, D)
Buttons

9

PREPARATION
BACK PANEL INFORMATION
Here shown may be somewhat different from your TV.

32/37/42LC5DC*,32/37/42LC50C*,
42LB5DC, 42LB50C
32LX5DC*, 32LX50C*

42PX8DC

S-VIDEO

R AUDIO RL/MONO VIDEO S-VIDEO

8

AV IN 2

ANTENNA IN

8

AV IN 2

11

11

M.P.I.

42PG60C, 42PG65C

NTENNA IN

S-VIDEO

VIDEO

OR
VIDEO L/MONO AUDIO

PREPARATION
11

AV IN 2

A
O R
L/MONO AUDIO

■

32/37/42LG500H

M.P.I.

S-VIDEO

)

VIDEO L/MONO AUDIO R

(

8

AV IN 2

AV IN 2

11

11
(

)

ANTENNA IN
ANTENNA IN

M.P.I.
M.P.I.
13

12

(

)

32/37/42LC5DC*, 32/37/42LC50C*,
42LB5DC, 42LB50C, 32LX5DC*, 32LX50C*, 42PX8DC
2
1

(

(

3

RESET
SERVICE ONLY

UPDATE

RGB IN
(

RJP
INTERFACE

10

VIDEO

AUDIO

COMPONENT IN

9

S-VIDEO

)

(MONO)

AUDIO

AV IN 1

8

)

5

REMOTE
CONTROL
OUT

M.P.I.

2

1(DVI)

(

4

DIGITAL
AUDIO
OUT
(OPTICAL)

)

HDMI/DVI IN

10

8

R

VIDEO L/MONO AUDIO R

R

S-VIDEO

VIDEO

SPEAKER AUDIO
IN
OUT
(RGB, DVI)
8

7

6

)

8

42PG60C, 42PG65C
6
10
RGB IN

DIGITAL
AUDIO OUT

RJP
SPEAKER
INTERFACE OUT
8

AUDIO
(RGB / DVI)

RGB(PC)

2

7

REMOTE
CONTROL
OUT

OPTICAL

4

1
SERVICE ONLY
COMPONENT IN
L

DVI IN

AUDIO

VIDEO

9

AUDIO

S-VIDEO

R

1

VIDEO L (MONO)

PREPARATION

2

UPDATE

RESET

AV IN 1

HDMI IN

R

8

5

32/37/42LG500H
1

OPTICAL
DIGITAL SPEAKER OUT
AUDIO OUT
8

6

HDMI/DVI IN

RESET

RGB IN

2
1(DVI)

RGB(PC)

UPDATE

AUDIO
(RGB/DVI)

RS-232C IN
(SERVICE ONLY)

AV IN 1

RJP
INTERFACE
AUDIO

VIDEO

10

COMPONENT IN

9

REMOTE
CONTROL OUT

/ MONO

S-VIDEO AUDIO

5

1

HDMI/DVI IN, HDMI IN
Connect a HDMI (DVI) connection to either input.

2

DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.

3 13

7

2

4

4

VIDEO

8

8

AV (Audio/Video) IN
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.

9

COMPONENT IN
Connect a component video/audio device to these
jacks.

M.P.I

4

RESET/UPDATE/REMOTE CONTROL OUT

10

RJP INTERFACE

5

SERVICE ONLY

11

6

RGB IN (PC)
Connect the output from a PC.
AUDIO IN (RGB, DVI)
Connect the audio from a PC or DTV.

Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.

12

ANTENNA IN
Connect over-the air signals to this jack.

7

SPEAKER OUT 8Ω

11

PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■

Here shown may be somewhat different from your TV.

(This feature is not available for all models.)
Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.

1
PREPARATION

2

PROTECTIVE BRACKET

Install the CABLE HOLDER as shown.

CABLE HOLDER

2

Install the CABLE MANAGEMENT as shown.

CABLE MANAGEMENT

NOTE
G

Do not hold the CABLE MANAGEMENT when moving
the product.
- If the product is dropped, you may be injured or the
product may be damaged.

How to remove the CABLE MANAGEMENT
G

12

Hold the CABLE MANAGEMENT with both hands and
pull it backward.

BOLT

(This feature is not available for all models.)

To separate the CABLE HOLDER, loosen the bolt
installed the set.

2

Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL
EQUIPMENT SETUP section.
Secure the power cable with the PROTECTIVE
BRACKET and the screw as shown. It will help prevent
the power cable from being removed by accident.

PREPARATION

1

PROTECTIVE BRACKET

3

Install the CABLE HOLDER as shown.

BOLT CABLE
HOLDER

13

PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■

Here shown may be somewhat different from your TV.
42PG60C, 42PG65C

42PX8DC

1

Hold the CABLE MANAGEMENT with both
hands and pull it as shown.

Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.

2

Install the CABLE MANAGEMENT CLIP as
shown. (Except 42PG60C model)
If your TV has CABLE HOLDER, fix it as shown
and bundle the cables.

PREPARATION

1

45°
2

Connect the cables as necessary.
To connect an additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.

CABLE MANAGEMENT
CLIP

3

Install the CABLE MANAGEMENT as shown.

CABLE HOLDER

How to remove the
CABLE MANAGEMENT CLIP
(Except 42PG60C model)
G

First, press the cable management. Hold the
C A B L E M A N A G E M E N T C L I P with both
hands and pull it upward.

! NOTE
G

14

Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.
- If the TV is dropped, you may be injured or
the product may be broken.

32/37/42LG500H

BACK COVER FOR WIRE
ARRANGEMENT
1

1

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2

Assemble the parts of the S T A N D B O D Y
with C O V E R B A S E of the TV.

PREPARATION

Connect the cables as necessary.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Secure the power cable with the PLUG IN TYPE
HOLDER for power code and PROTECTIVE
BRACKET/Screw. It will help prevent the power
cable from being removed by accident.

STAND INSTALLATION

STAND BODY

PLUG IN TYPE HOLDER
PROTECTIVE BRACKET
(This feature is not available for all models.)

2

Install the CABLE MANAGEMENT CLIP as shown.
If your TV has the CABLE HOLDER, install it as
shown and bundle the cables.

COVER BASE
Assemble the TV as shown.

3

CABLE MANAGEMENT CLIP
CABLE HOLDER

3

Put the cables inside the CABLE MANAGEMENT
CLIP and snap it closed.

4
x4
Tighten the stand with the
four screws (provided as
parts of the TV).

or

PROTECTION COVER

Tighten the two of these four screws
x 2 and the two Torx plus star head screws
(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).

x2

After removing the stand, install the included p r o t e c t i o n
c o v e r over the hole for the stand.
Press the P R O T E C T I O N C O V E R into the TV until you
hear it click.

! NOTE
G

When assembling the desk type stand, make sure
the bolt is fully tightened (If not tightened fully,
the TV can tilt forward after the product installation). Do not over tighten.

15

PREPARATION
STAND INSTALLATION
32/37LC5DC*, 32/37LC50C*
Carefully place the product screen side down
on a cushioned surface that will protect product and screen from damage.

2

Assemble the product stand with the product
as shown.

PREPARATION

1

3

16

42PG65C

1

Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.

NOTE
G

After inserting the MPI slot/card, install the
product stand.

2

Assemble the product stand with the product as
shown.

3

Tighten the 4 bolts securely using the holes in
the back of the TV.

Securely install the 4 bolts provided as shown
below.

ATTACHING THE TV TO A WALL
This feature is not available for all models.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

■

PREPARATION

■

Insert the TV brackets (or eye-bolts) and bolts to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.

SWIVEL STAND
20° (37LC5DC1, 42LC5DC, 42LC50C,

42PX8DC,

42LB5DC, 42LB50C, 42PG65C models)

90° (32LX5DC/S, 32LX50C/S, 32LC5DC/S,
32LC50C/S, 37LC5DC, 37LC50C, 32/37/42LG500H
models)

The TV can be conveniently swivelled on its stand 20°or 90° to the left or right to provide the optimum viewing angle.

17

PREPARATION
ATTACHING THE TV TO A DESK
■

Here shown may be somewhat different from your TV.
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
10 mm)
* S c r e w s - M 5 x L ( t a b l e d e p t h + 8~1
ex) table depth-15mm: Bolts - M5 x 25

32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C

PREPARATION

Stand
4-Screws
Desk

32LX5DC*, 32LX50C*

Stand

4-Screws

Desk

42PX8DC

Stand

2-Screws
Desk

42PG65C

Stand

4-Screws
Desk

18

32/37/42LG500H
Stand

1-Screw
(provided as parts of the product)
Desk

PREPARATION

WARNING
G

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.

VESA WALL MOUNTING
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.
■

This feature is not available for all models.
Product
A
B

LCD TV

VESA
(A * B)

Model
32LC5DC*, 32LC50C*, 32LX5DC*,
32LX50C*

200 * 100

32/37/42LC5DC*, 32/37/42LC50C*,
42LB5DC, 42LB50C, 32/37/42LG500H

600 * 400

42PG60C

400 * 400

42PX8DC

600 * 400

PLASMA TV

NOTE
G

Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.

DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each
side from the wall.
■

Image shown may differ from your TV.

■

This feature is not available for all models.

4 inches
4 inches

4 inches
4 inches

CAUTION
G

Ensure adequate ventilation by following the clearance recommendations.

19

PREPARATION
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.

PREPARATION

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

Wall
Antenna
Socket

ANTENNA IN

M.P.I.

RF Coaxial Wire (75 ohm)

Outdoor
Antenna
(VHF, UHF)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Copper Wire
Be careful not to bend the bronze wire
when connecting the antenna.

2. Cable
ANTENNA IN

M.P.I.

Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)

ANTENNA IN

UHF

M.P.I.

Signal
Amplifier

Antenna
VHF

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
■

NOTE

20

G

The TV will let you know when the analog, cable, and digital channel scans are complete.

EXTERNAL EQUIPMENT SETUP
■
■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
This part of external equipment setup mainly use picture for LCD TV(Except 32/37/42LG500H) models.

HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.

When connecting Component cable
EXTERNAL EQUIPMENT SETUP

1. How to connect
1

2

Y

Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on
the set. Match the jack colors
(Y = green, PB = blue, and PR = red).

PB

PR

DIGITAL
AUDIO
OUT
(OPTICAL)

HDMI/DVI IN

■

■

M.P.I.

2

1(DVI)

2. How to use

R

2

1

Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the set.

L

Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select C o m p o n e n t input source with using the I N P U T
button on the remote control.

Signal

Component

HDMI1/DVI,
HDMI2

480i

Yes

No

480p

Yes

Yes

720p

Yes

Yes

1080i

Yes

Yes

1080p

Yes

Yes

(

RJP
RFACE

VIDEO

AUDIO

)

S-VIDEO

COMPONENT IN

* 42LB5DC, 42LB50C model only

21

EXTERNAL EQUIPMENT SETUP

When connecting HDMI cable
1. How to connect

EXTERNAL EQUIPMENT SETUP

1

Connect the digital set-top box to H D M I / D V I I N
1 ( D V I ) or 2 jack on the set.

2

No separated audio connection is necessary.
HDMI supports both audio and video.
HDMI/DVI IN

M.P.I

2

1(DVI)

2. How to use
■
(

)

■

Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)

VIDEO

RJP
INTERFACE

Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.

COMPONENT IN
1

NOTE
G

If the device does not support Auto HDMI, you need to set
the output resolution appropriately.

HDMI-DTV OUTPUT

(

22

DIGITAL
AUDIO
OUT
(OPTICAL)

)

AUDIO

When connecting HDMI to DVI cable

DIGITAL
AUDIO
OUT
(OPTICAL)

HDMI/DVI IN

RESET
SERVICE ONLY

M.P.I.

1(DVI)

UPDATE

REMOTE
CONTROL
OUT
RGB IN

VIDEO

RJP
INTERFACE

AUDIO

COMPONENT IN

S-VIDEO

(MONO)

AUDIO

AV IN 1

VIDEO

SPEAKER AUDIO
IN
OUT
(RGB, DVI)
8

1

2

DVI-DTV OUTPUT

L

EXTERNAL EQUIPMENT SETUP

2

R

1. How to connect
1

Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 ( D V I ) or 2 jack on the set.

2

Connect the audio output of the digital set-top box to the A U D I O I N ( R G B , D V I ) jack on the set.

2. How to use
■

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

■

Select H D M I 1 / D V I or H D M I 2 input source with using the I N P U T button on the remote control.

23

EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting Component cable
1. How to connect
1
EXTERNAL EQUIPMENT SETUP

2

Connect the video outputs (Y, PB, PR) of the DVD to
the C O M P O N E N T I N V I D E O jacks on the set.
Match the jack colors
(Y = green, PB = blue, and PR = red).
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the set.

2. How to use

PB

PR

1

■

Select C o m p o n e n t input source with using the I N P U T
button on the remote control.

R

DIGITAL
AUDIO
OUT
(OPTICAL)

(

RJP
ERFACE

VIDEO

AUDIO

COMPONENT IN

Refer to the DVD player's manual for operating instructions.

Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

Video output ports
on DVD player

24

Y

PB

PR

Y

PB

PR

Y

B-Y

R-Y

Y

Cb

Cr

Y

Pb

Pr

M.P.I.

2

1(DVI)

Turn on the DVD player, insert a DVD.

L

2

HDMI/DVI IN

■

■

Y

S-VIDEO

)

When connecting with an S-Video cable
AUDIO

1. How to connect
1

Connect the S-VIDEO output of the DVD to the
S - V I D E O input on the set.

2

Connect the audio outputs of the DVD to the A U D I O
input jacks on the set.

■

Turn on the DVD player, insert a DVD.

■

■

Select A V 1 input source with using the I N P U T button on
the remote control.
If connected to A V I N 2, select A V 2 input source.

■

Refer to the DVD player's manual for operating instructions.

GITAL
UDIO
OUT
TICAL)

L

R

1

2

RESET
S

REMOTE
CONTROL
OUT

M.P.I.
UPDATE

S-VIDEO

AUDIO

NT IN

(MONO)

VIDEO

AUDIO

AV IN 1

SPE
O

When connecting HDMI cable
1. How to connect
1

Connect the HDMI output of the DVD to the
H D M I / D V I I N 1 ( D V I ) or 2 jack on the set.

2

No separated audio connection is necessary.
HDMI supports both audio and video.

DIGITAL
AUDIO
OUT
(OPTICAL)

HDMI/DVI IN

2. How to use

(

■

Select H D M I 1 / D V I or H D M I 2 input source with using
the I N P U T button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

EXTERNAL EQUIPMENT SETUP

2. How to use

S-VIDEO

M.P.I

2

1(DVI)

)

(

VIDEO

RJP
INTERFACE

AUDIO

COMPONENT IN
1

NOTE
G

If the device does not support Auto HDMI, you need to
set the output resolution appropriately.
HDMI-DVD OUTPUT

25

EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period
of time. (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen
may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the
manufactures warranty does not cover the product bearing this phenomenon.
■

When connecting with an antenna
EXTERNAL EQUIPMENT SETUP

ANTENNA IN

M.P.I.
M.P
.I.

1
S-VIDEO

VIDEO

L

R

ANT OUT

ANT IN

OUTPUT
SWITCH

Wall Jack
2

Antenna

1. How to connect
1

Connect the RF antenna out socket of the VCR to the A n t e n n a socket on the set.

2

Connect the antenna cable to the RF antenna in socket of the VCR.

2. How to use

26

■

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

(

ANT IN

S-VIDEO

ANT OUT

OUTPUT
SWITCH

When connecting with a RCA cable
1. How to connect
1

V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)

M.P.I.

TAL
DIO
UT
CAL)

)

L

VIDEO

R

1

RESET
SERV

REMOTE
CONTROL
OUT

M.P.I.
UPDATE

■

Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)

R

(MONO)

S-VIDEO

AUDIO

VIDEO

AUDIO

T IN

AV IN 1

Select A V 1 input source with using the I N P U T button on
the remote control.
■ If connected to A V I N 2, select A V 2 input source.

SPEAKE
OUT
8

■

NOTE
G

If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O
L / M O N O jack of the set.

EXTERNAL EQUIPMENT SETUP

2. How to use

When connecting with an S-Video cable
1. How to connect

ANT IN

S-VIDEO

ANT OUT

OUTPUT
SWITCH

L

R

VIDEO

M.P.I.

1

Connect the S-VIDEO output of the VCR to the
S - V I D E O input on the set.

2

Connect the audio outputs of the VCR to the A U D I O
input jacks on the set.

RESET
SER

M.P.I.

2. How to use
■

2

1

GITAL
AUDIO
OUT
PTICAL)

UPDATE

Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
AUDIO

■

Select A V 1 input source with using the I N P U T button on
the remote control.

■

If connected to A V I N 2, select A V 2 input source.

ENT IN

G

The picture quality is improved: compared to normal
composite (RCA cable) input.

(MONO)

AUDIO

AV IN 1

VIDEO

SPEAK
OUT
8

CAUTION
G

NOTE

S-VIDEO

REMOTE
CONTROL
OUT

Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.

27

EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder

1. How to connect

Video Game Set

1

V I D E O jacks
Connect the A U D I O/V
between TV and external equipment.
Match the jack colors.
(Video = yellow, Audio Left = white, and
Audio Right = red)

VIDEO

L

R

■

Select A V 2 input source with using the
I N P U T button on the remote control.

■

If connected to A V I N 1 input, select A V 1
input source.

■

Operate the corresponding external equipment.

S-VIDEO

1

VIDEO L/MONO AUDIO R

EXTERNAL EQUIPMENT SETUP

2. How to use

AV IN 2

DIGITAL AUDIO OUTPUT

i.e) 32/37/42LC5DC*, 32/37/42LC50C*,
42LB5DC, 42LB50C

Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.

1. How to connect
1

Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.

2

Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.

DIGITAL
AUDIO
OUT
(OPTICAL)

HDMI/DVI IN

Set the “TV Speaker option - Off” in the AUDIO
menu. (G p . 5 8). See the external audio equipment
instruction manual for operation.

3

NOTE
G

When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p . 5 8)

CAUTION
G

28

Do not look into the optical output port. Looking at the
laser beam may damage your vision.

M.P.I.

2

1(DVI)

1

(

RJP
NTERFACE

VIDEO

AUDIO

COMPONENT IN

2

S-V

PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

When connecting D-sub 15pin cable
SERVICE ONLY

1. How to connect

REMOTE
CONTROL
OUT

ATE

(

(

)

)

RGB IN

1

(MONO)

VIDEO

2

AUDIO
IN
(RGB, DVI)

SPEAKER
OUT
8

AUDIO

AV IN 1

EXTERNAL EQUIPMENT SETUP

Connect the RGB output of the PC to the R G B I N
jack on the set.
Connect the PC audio output to the A U D I O I N
( R G B , D V I ) jack on the set.

2. How to use
■

Turn on the PC and the set.

■

Select R G B - P C input source with using the I N P U T button
on the remote control.

2

1

When connecting HDMI to DVI cable

RGB OUTPUT

AUDIO

1. How to connect
1
2

Connect the DVI output of the PC to the H D M I / D V I
I N 1 ( D V I ) jack on the set.

DIGITA
AUDIO
OUT
(OPTICA VICE ONLY

HDMI/DVI IN
2

1(DVI)

RGB IN

Connect the PC audio output to the A U D I O I N
( R G B / D V I) jack on the set.
(

)

(

)

ER

VIDEO

RJP
INTERFACE

COMPONENT

AUDIO
IN
(RGB, DVI)

(

)

1

2. How to use
■

Turn on the PC and the set

■

Select H D M I 1 / D V I input source with using the I N P U T
button on the remote control.

2

DVI-PC OUTPUT

AUDIO

29

EXTERNAL EQUIPMENT SETUP
NOTES
G

Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.

G

Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC output to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the VIDEO menu
until the picture is clear. If the refresh rate of the

EXTERNAL EQUIPMENT SETUP

Supported Display Specifications (RGB/HDMI1-PC)
Resolution

Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

640x350

31.469

70.08

640x480

31.469
37.861
37.500

59.94
72.80
75.00

800x600

35.156
37.879
48.077
46.875

56.25
60.31
72.18
75.00

1024x768

48.363
56.476
60.023

60.00
70.06
75.02

1280x768

47.700

60.00

1360x768

47.720

59.799

1366x768

47.130

59.658

PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
G

Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.

The synchronization input form for Horizontal and
Vertical frequencies is separate.

G

Supported Display Specifications (HDMI2-DTV)
Resolution

Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

720x480

31.500
31.469

60.00
59.94

1280x720

44.960
45.000

59.94
60.00

1920x1080

33.720
33.750

59.94
60.00

Supported Display Specifications (Y, CB /PB, CR /PR)
Resolution

Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

720x480

15.73
15.73
31.47
31.50

59.94
60.00
59.94
60.00

1280x720

44.96
45.00

59.94
60.00

1920x1080

33.72
33.75

59.94
60.00

Supported Display Specifications (RGB/HDMI1-DTV)
Resolution
720x480

Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

31.50
60.00
31.47(HDMI1-DTV:31.469) 59.94
* RGB-DOS mode only: 640x350

1280x720

44.96
45.00

59.94
60.00

1920x1080

33.72
33.75

59.94
60.00

* Except 42PG60C/65C models in HDMI1-PC mode.

30

* 42LB5DC, 42LB50C
Supported Display Specifications (RGB/HDMI1-PC)
Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

31.469

70.08

640x480

31.469
37.861
37.500

Supported Display Specifications (HDMI2-DTV)
Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

720x480

31.500
31.469

60.00
59.94

59.94
72.80
75.00

1280x720

44.960
45.000

59.94
60.00

800x600

35.156
37.879
48.077
46.875

56.25
60.31
72.18
75.00

1920x1080

33.720
33.750
67.500

59.94
60.00
60.00

1024x768

48.363
56.476
60.023

60.00
70.06
75.02

1280x768

47.700

60.00

1360x768

47.720

59.799

1366x768

47.130

59.658

1280x1024

63.668

59.895

65.317

59.978

640x350
(RGB only)

(RGB only)

1400x1050
(RGB only)

1600x1200

74.537

59.869

1920x1080

66.587

59.934

1920x1200

74.038

59.950

Supported Display Specifications (Y, CB /PB, CR /PR)
Resolution

Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

720x480

15.73
15.73
31.47
31.50

59.94
60.00
59.94
60.00

1280x720

44.96
45.00

59.94
60.00

1920x1080

33.72
33.75
67.50

59.94
60.00
60.00

EXTERNAL EQUIPMENT SETUP

Resolution

Resolution

* RGB-DOS mode only: 640x350

Supported Display Specifications (RGB/HDMI1-DTV)
Resolution
720x480

Horizontal
Frequency(KHz)

Vertical
Frequency(Hz)

31.50
60.00
31.47(HDMI1-DTV:31.469) 59.94

1280x720

44.96
45.00

59.94
60.00

1920x1080

33.72
33.75

59.94
60.00
59.94

67.43(HDMI1-DTV:67.5)

31

WATCHING TV / CHANNEL CONTROL
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER Turns your TV or any other programmed equipment on
or off, depending on mode.
TV INPUT

In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2
input sources, screen returns to the last TV channel.

External input modes rotate in regular sequence: TV, AV1INPUT 2, Component, RGB, HDMI1/DVI and HDMI2.

INPUT
TV

MODE
TV

POWER

INPUT

DVD

MULTI

VCR
PIP CH - PIP CH + PIP INPUT

PIP
EZ PIC

EZ SOUND

INFO

SWAP

MULTI Selects: RGB,HDMI1/DVI, HDMI2 and Component input
sources.

WATCHING TV / CHANNEL CONTROL

Adjusts brightness on screen.
MENU

EXIT

RATIO
SAP

PIP CH +/- Changes the PIP channel. G p . 4 2
PIP INPUT Select the connected input source for the sub-picture. G p.41

ENTER

Selects the factory preset picture depend on the viewing
EZ PIC environment. p.45
G
TIMER

EZ SOUND Selects the factory preset sound for type of program.
p.55
SWAP(or PIP
SWAP) Exchange the main/sub images. G p . 4 2
VCR/DVD Control video cassette recorders or DVD players.
control buttons
NUMBER button
— (DASH) Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
FLASH BACK Tune to the last channel viewed.

32

CC

PIP Switches the sub picture Double Window or off mode. G p.41-42

G

CH PAGE

VOL
MUTE

1

2

3

4

5

6

7

8

9

0

FLASH
BACK

(Only 42PG60C, 42PG65C, 32/37/42LG500H models)
TV

POWER

DVD

CC

INPUT

VCR

STB

RATIO

MODE Select the remote’s operating mode: TV, DVD, VCR (or
STB).
RATIO Change the aspect ratio.

G

p.43- 4 4

CC Select a closed caption. G p.62 (*In DTV/CADTV mode G p.63)
THUMBSTICK Navigate the on-screen menus and adjust the system set(Up/Down/Left tings to your preference.

ENTER

/Right/ENTER)

EXIT(or Clears all on-screen displays and returns to TV viewing
RETURN) from any menu.
RETURN

MENU

INFO i

MENU Displays the main menu.

CH

VOL

P
A
G
E

MUTE

1

2

3

4

5

6

7

8

9

0

FLASHBK

PIP
PIP CH-

VOLUME UP Increase/decrease the sound level.
/DOWN
TIMER Select the amount of time before your TV turns off automatically. G p .6 9
MUTE Switch the sound on or off. G p.34
CHANNEL Select available channels.
UP/DOWN
PAGE Move from one full set of screen information to the next one.
UP/DOWN

SAP
PIP CH+ PIP SWAP PIP INPUT

Installing Batteries

Remote control effective range
32/37/42LC5DC*,
42LB5DC, 32/37/42LC5DC*, 32LX5DC*, 32LX50C*
32/37/42LC50C*,
42LB5DC, 42LB50C

42PX8DC

INPUT

■

■

■

WATCHING TV / CHANNEL CONTROL

INFO Display information at the top of the screen.
TIMER

INPUT
TV

Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+ with +, - with -).
Install two 1.5V AA batteries(or 1.5V AAA)
Don’t mix old or used batteries with new ones.
Close cover.

INPUT
TV

MODE
TV

POWER

INPUT

DVD

MODE
TV

POWER

INPUT

INPUT
TV

MODE
TV

POWER

VCR

MULTI

INPUT

DVD

DVD
VCR

MULTI

PIP CH - PIP CH + PIP INPUT

PIP
EZ PIC

EZ SOUND

INFO

SWAP

PIP CH - PIP CH + PIP INPUT

PIP
EZ PIC

ENTER

EZ SOUND

INFO

SWAP

VCR

MULTI

PIP CH - PIP CH + PIP INPUT

PIP
EZ PIC

EZ SOUND

INFO

SWAP

CC

MENU

EXIT
CC

MENU

EXIT

RATIO
SAP

RATIO
SAP
CC

MENU

EXIT

ENTER

ENTER

RATIO
SAP

ENTER
TIMER

CH PAGE

VOL
TIMER
MUTE

CH PAGE

VOL
MUTE

TIMER

3

MUTE

1

2

1

2

3

5

6

3

Use a remote control up to 22 feet distance
and 30 degree (left/right) within the receiving
unit scope.
INPUT

INPUT

■

2

4

CH PAGE

VOL

1

■

ENTER

ENTER

Dispose of used batteries in a recycle bin to
preserve environment.

33

WATCHING TV /CHANNEL CONTROL
TURNING ON TV
First, connect power cord correctly.
At this moment, the TV switches to standby mode.
■ In standby mode to turn TV on, press the
(or O N / O F F) button on
the TV or press the POWER button on the remote control.

1

WATCHING TV / CHANNEL CONTROL

2

Select the viewing source by using the INPUT(or TV INPUT) button on
the remote control.
■ This TV is programmed to remember which power state it was last set to,
even if the power cord is out.

3

When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.

NOTE
G

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SELECTION
1

Press the CH ( + or - ) or C H (
a channel number.

or

) or NUMBER buttons to select

VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.

34

1

Press the VOL ( + or -) button to adjust the volume.

2

If you want to switch the sound off, press the M U T E button.

3

You can cancel the Mute function by pressing the M U T E or VOL ( + or -)
button.

ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.

1

Press the M E N U button and then use
menu.

2

Press the G or
available menus.

button and then use D

SETUP

AUDIO
TIME
OPTION

E F G

or

or

VIDEO
VIDEO

Manual Scan

AUDIO

Channel Edit

TIME

DTV Signal

OPTION

Channel Label

button to display the

AUDIO

SETUP

EZ Scan

button to select the each

SETUP

EZ Picture

VIDEO

Color Temperature

AUDIO

XD

TIME

Advanced

OPTION

Reset

SCREEN

SCREEN

SCREEN

LOCK

LOCK

LOCK

Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speakers

TIME

LOCK
For USA

For Canada

SETUP

Auto Clock

VIDEO
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN

Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General

LOCK

Aux. Block

Lock System
Set Password

Manual Clock
AUDIO

Off Timer
TIME

On Timer

Block Channel

OPTION

TV Rating-English

SCREEN

TV Rating-French

0

WATCHING TV / CHANNEL CONTROL

SETUP
VIDEO

or E or

D

Auto Off

LOCK

Aux. Block
Downloadable Rating

Downloadable Rating

OPTION
SCREEN
SETUP
VIDEO
AUDIO
TIME

SETUP
VIDEO

Auto config.
Manual config.
XGA Mode
Reset

AUDIO
TIME

Aspect Ratio
Caption/Text
Caption Options
Language

OPTION

OPTION

SCREEN

SCREEN

LOCK

ISM Method
Low Power
Set ID

LOCK

Only 42PX8DC model

35

WATCHING TV /CHANNEL CONTROL
CHANNEL SETUP
Auto Scan (EZ Scan)
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
Run EZ Scan again after any Antenna/Cable connection
changes.
A password is required to gain access to EZ Scan menu if
the Lock System is turned on.

WATCHING TV / CHANNEL CONTROL

SETUP
VIDEO

1

Press the M E N U button and then use D or E or
or
button to select the S E T U P menu.

AUDIO
TIME
OPTION

EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label

SCREEN
LOCK

2

Press the G or
button and then use
or
button to select E Z S c a n.

D

or E or

1

3

Press the E N T E R button to begin the channel search.
Allow E Z S c a n to complete the channel search cycle
for A N T E N N A and C A B L E.

SETUP
VIDEO
AUDIO
TIME
OPTION

EZ Scan

G

Manual Scan
Channel Edit
DTV Signal
Channel Label

SCREEN

Selection ( G or
) leads you
to the EZ scan screen.

LOCK

2

SETUP

EZ Scan

G

VIDEO

Manual Scan
AUDIO

Channel Edit

Processing EZ scan...

TIME

DTV Signal
OPTION
SCREEN
LOCK

Channel Label

Selection ( G or
) leads you
to the EZ scan screen.
ANALOG
Found Channel(s)
Next

MENU Prev.

3

36

9
4

Add/Delete Channel (Manual Scan)
A password is required to gain access to Manual Scan
menu if the Lock System is turned on.

1

Press the M E N U button and then use D or E or
or
button to select the SETUP menu.

AUDIO
TIME
OPTION

EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label

SCREEN
LOCK

2

Press the G or
button and then use D or E or
or
button to select Manual Scan.
1

3

Press the G or
button and then use D or E or
T V, C A T V),
or
button to select Analog(T
D T V, C A D T V).
Digital(D

SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press the G or
button and then use D or E or
or
button to select channel you want to add or
delete.

EZ Scan
Manual Scan
Channel Edit

G

Channel Type

Number

ANALOG

2

DTV Signal
Channel Label

WATCHING TV / CHANNEL CONTROL

SETUP
VIDEO

SCREEN
LOCK

2

5

Press the ENTER button to add or delete the channel.
SETUP
VIDEO

6

Press the E X I T or RETURN button to return to TV
viewing or press M E N U button to return to the previous menu.

AUDIO
TIME
OPTION

EZ Scan
Manual Scan
Channel Edit
DTV Signal

Channel Type
D
E

ANALOG

Number
G

2

ANALOG 2

Channel Label

SCREEN
LOCK
Press
to delete the channel.

3

4

5

37

WATCHING TV /CHANNEL CONTROL

Channel Editing
A Custom List can be created by toggling each channel on
or off with ENTER button. The channels in the Custom List
are displayed in black, and the channels deleted from the
Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the
small window at the top-left corner of the screen.
A password is required to gain access to Manual Scan menu
if the Lock System is turned on.

WATCHING TV / CHANNEL CONTROL

SETUP
VIDEO
AUDIO
TIME
OPTION

EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label

SCREEN
LOCK

1

Press the M E N U button and then use D or E or
or
button to select the SETUP menu.
1
SETUP

2

Press the G or
button and then use D or E or
or
button to select C h a n n e l E d i t.

VIDEO
AUDIO
TIME
OPTION

3

Press the G or
button and then use D or E or
or
button to select A N A L O G or D I G I T A L.

4

Press the G or
button and then use D or E or
or
button to select channel and then use the
ENTER button to add or delete it.

ANALOG

EZ Scan

2-0

Manual Scan
Channel Edit

D

4-0

G

6-0

DTV Signal

9-0

Channel Label

SCREEN

11-0

LOCK

13-0
14-0

E

2
SETUP
VIDEO
AUDIO
TIME
OPTION

5

Press E X I T or RETURN button to return to TV viewing or press M E N U button to return to the previous
menu.

EZ Scan

D
E

ANALOG

Manual Scan

2-0

Channel Edit

4-0

DTV Signal

6-0

Channel Label

9-0

SCREEN

11-0

LOCK

13-0

G
D

14-0

E

3

38

4

DTV SIGNAL STRENGTH
This feature displays the DTV signal levels being received
and indicates whether you need to adjust your antenna or
digital cable input. The higher the signal strength, the less
likely you are to experience picture degradation.
DTV Signal: This function is only available when the input
signal is DTV or CADTV.

1

Press the M E N U button and then use D or E or
or
button to select the S E T U P menu.

AUDIO
TIME
OPTION

EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label

SCREEN
LOCK

2

Press the G or
button and then use D or E or
or
button to select D T V S i g n a l .

3

View the on-screen signal strength monitor to see
the quality of the signal being received.

1

SETUP
VIDEO
AUDIO
TIME

4

Press EXIT or RETURN button to return to TV viewing or press M E N U button to return to the previous menu.

OPTION

EZ Scan
Manual Scan
Channel Edit

Bad

Normal

Good

DTV Signal

WATCHING TV / CHANNEL CONTROL

SETUP
VIDEO

Channel Label

SCREEN
LOCK

2

3

39

WATCHING TV /CHANNEL CONTROL
CHANNEL LABEL
Choose preset labels for your channels.
If a channel label is provided on the signal from the
broadcasting station, the TV displays a short name for a
channel even if you didn't preset a label for the channel.

WATCHING TV / CHANNEL CONTROL

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the S E T U P menu.

AUDIO
TIME
OPTION

EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label

SCREEN
LOCK

2

Press the G or
button and then use D or E or
or
button to select C h a n n e l L a b e l .
1

3

Press the G or
button and then use D or E or
or
button to select a channel to label.

SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press the G or
button and then use D or E or
or
button to select the appropriate label for the
channel.

5

Press E X I T or RETURN button to return to TV viewing
or press M E N U button to return to the previous menu.

SCREEN

EZ Scan
Manual Scan
Channel Edit
DTV Signal
Channel Label

G

Ch.
Logo

ANALOG 2
No Logo

LOCK

2

40

3

PICTURE CONTROL
WATCHING DW (DOUBLE WINDOW)
Double Window mode splits the screen into two images, allowing two picture
sources to be shown on the TV screen at the same time. Each source is given half
the screen.

Watching Double Window
Press the P I P button to access the sub picture.
DW Mode

PIP Off

PICTURE CONTROL

Selecting an Input Signal Source for Double Window
Use the P I P I N P U T button to select the input source for the sub picture.
Each press of P I P I N P U T button changes the PIP source.

Use the P I P I N P U T button to select the input source for the sub picture. Each press of PIP INPUT button
changes the PIP source.
Main Picture Source

Available Sub Picture Sources

TV

AV1, AV2

AV1

TV, AV2

AV2

TV, AV1

RGB, Component, HDMI1/DVI, HDMI2

TV, AV1, and AV2

41

PICTURE CONTROL

TV Program Selection for PIP
1

Use the P I P C H + / - button to select a channel for the sub picture.
The selected channel number is displayed just below the input source of main picture.

Swapping the PIP / Double Window
PICTURE CONTROL

42

1

Repeatedly, use the S W A P or P I P S W A P button to switch the main and sub pictures.
■

Component, RGB, HDMI1/DVI, HDMI2 input sources for the main picture can’t be used to swap the
main and sub pictures.

PICTURE SIZE (ASPECT RATIO) CONTROL
This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you
need to specify how the picture is to be displayed.
■ RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.

1

Press the RATIO button repeatedly to select the desired picture format.
■ You can also adjust A s p e c t R a t i o in the O P T I O N menu.

Set by program
Selects the proper picture proportion to match the source’s image.

4:3)

(16:9

16:9)

Set By Program

Set By Program

PICTURE CONTROL

(4:3

4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.

4:3

16:9
Adjust the picture horizontally, in a linear proportion to fill the entire screen.

16:9

43

PICTURE CONTROL

Horizon
The screen size is, more enlarged at both sides, to create a spectacular view.

Horizon

PICTURE CONTROL

Zoom 1
Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions
of the picture will be cropped.

Zoom 1

Zoom 2
Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.

Zoom 2

44

PRESET PICTURE SETTINGS
EZ Picture - Preset
EZ Picture adjusts the TV for the best picture appearance. Select
the preset value in the EZ Picture menu based on the program
category.
Daylight, Normal, Night Time Settings are preset for the optimum picture quality at the factory and are not adjustable.
In the U s e r 1 and U s e r 2 modes only, user can directly adjust
the contrast, brightness, color, sharpness, tint.

1

■

PICTURE CONTROL

2

Press the E Z P I C button repeatedly to select the picture
appearance setup option as below(Except 42PG60C,
42PG65C models):
D a y l i g h t, N o r m a l, N i g h t T i m e, U s e r 1, and U s e r 2
(your own settings).

Press the E X I T or R E T U R N button to save and return to TV
viewing.

You can also use the VIDEO menu to adjust E Z P i c t u r e.
SETUP
VIDEO
AUDIO
TIME
OPTION

EZ Picture
Color Temperature
XD
Advanced
Reset

SETUP
VIDEO
AUDIO
TIME
OPTION

SCREEN

SCREEN

LOCK

LOCK

EZ Picture

G

Daylight

Color Temperature

Normal

XD

Night time

Advanced

User 1

Reset

User 2

45

PICTURE CONTROL

Color Tone - Preset
Choose one of three automatic color adjustments. Set to
warm to enhance hotter colors such as red, or set to cool
to see less intense colors with more blue.
When selecting EZ Picture (User 1 and User 2), you can
choose the Color Temperature.

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the V I D E O menu.

AUDIO
TIME

PICTURE CONTROL

OPTION

EZ Picture
Color Temperature
XD
Advanced
Reset

SCREEN
LOCK

2

Press the G or
button and then use D or E or
or
button to select C o l o r T e m p e r a t u r e.
1

3

Press the G or
button and then use D or E or
or
button to select either C o o l, N o r m a l, W a r m or
U s e r.

SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

EZ Picture
Color Temperature

G

Cool

XD

Normal

Advanced

Warm

Reset

User

SCREEN
LOCK

2

46

3

MANUAL PICTURE ADJUSTMENT
EZ Picture - User Mode
Adjust the picture appearance to suit your preference and
viewing situations.
This feature operate only if the EZ Picture set User 1 or
User 2.

SETUP

1

EZ Picture

VIDEO

Press the M E N U button and then use D or E or
or
button to select the V I D E O menu.

Color Temperature

AUDIO

XD

TIME

Advanced
Reset

SCREEN
LOCK

2

Press the G or
button and then use D or E or
or
button to select E Z P i c t u r e.
1

3

Press the G or
button and then use D or E or
or
button to select U s e r 1 or U s e r 2.

SETUP

EZ Picture

Daylight

Color Temperature

Normal

XD

Night Time

Advanced

User 1

Reset

User 2

VIDEO

PICTURE CONTROL

OPTION

AUDIO
TIME
OPTION

G

SCREEN

4

Press the G or
button and then use D or E or
or
button to select the desired picture option
( C o n t r a s t, B r i g h t n e s s, C o l o r, S h a r p n e s s, or
T i n t) .

LOCK

2

3

SETUP

5

Press the G or
button and then use F or G or
or
button to make appropriate adjustments.

VIDEO

User1

AUDIO

Contrast

85

Brightness

50

TIME
OPTION

Color

50

SCREEN

Sharpness

50

LOCK

6

Tint

G

0

R

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

G

4
SETUP
VIDEO

Contrast
AUDIO

85 F

G

E

TIME
OPTION
SCREEN
LOCK

5

47

PICTURE CONTROL

Color Tone - User Mode
You can also adjust the detailed settings (Red, Green, Blue)
by selecting the C o l o r T e m p e r a t u r e - U s e r menu.

SETUP

1

Press the M E N U button and then use D or E or
or
button to select the V I D E O menu.

VIDEO
AUDIO
TIME

PICTURE CONTROL

OPTION

EZ Picture
Color Temperature
XD
Advanced
Reset

SCREEN

2

Press the G or button and then use D or E or
or
button to select C o l o r T e m p e r a t u r e.

3

Press the G or button and then use D or E or
or
button to select U s e r.

LOCK

1
SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press the G or button and then use D or E or
or
button to select R e d, G r e e n, or B l u e.

5

Press the G or button and then use F or G or
or
button to make appropriate adjustments.
■

The adjustment range of R e d, G r e e n , or B l u e is
-40 ~ +40.

EZ Picture
Color Temperature

Cool

XD

Normal

Advanced

Warm

Reset

User

G

SCREEN
LOCK

2

3

SETUP
VIDEO

User

AUDIO

Red

0

Green

0

Blue

0

TIME
OPTION

G

SCREEN
LOCK

6

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

4
SETUP
VIDEO
AUDIO

Red

0 F

G

E

TIME
OPTION
SCREEN
LOCK

48

5

XD - PICTURE IMPROVEMENT TECHNOLOGY
XD is LG Electronic’s unique picture improving technology
to display a real HD source through an advanced digital signal processing algorithm.
When selecting EZ Picture options (Daylight, Normal and
Night time), XD is automatically changed to Auto.
When selecting EZ Picture options (User 1 and User 2), you
can choose the Auto / Manual.
When selecting the Manual, you can adjust the XD
Contrast, XD color and XD Noise.

SETUP

1

VIDEO
AUDIO
TIME
OPTION

EZ Picture
Color Temperature
XD
Advanced
Reset

SCREEN

2

Press the G or
button and then use
or
button to select X D.

3

Press the G or
button and then use D or
or
button to select A u t o or M a n u a l.

D

or

E

or

E

or

LOCK

1

Selecting the Manual Mode
button and then use D or E
1. Press the G or
or
or
button to select X D C o n t r a s t, X D
C o l o r or X D N R ( N o i s e ), M P E G N R.
■ X D C o n t r a s t : Optimizing the contrast automatically according to the brightness of the reflection.
■ X D C o l o r : Adjusting the colors of the reflection
automatically to reproduce as closely as possible
to the natural colors.
■ X D N R ( N o i s e ) : Removing the noise up to the
point where it does not damage the original picture.
■ M P E G N R : To reduce the picture noise which may
appear on the screen during watching the TV.
or
button to select O n
2. Press the F or G or
or O f f.

4

SETUP
VIDEO
AUDIO
TIME
OPTION

EZ Picture
Color Temperature
XD
Advanced
Reset

G

Auto
Manual
XD Contrast
On

SCREEN
LOCK

PICTURE CONTROL

Press the M E N U button and then use D or E or
or
button to select the V I D E O menu.

XD Color

On

XD NR
Off
MPEG NR

0

2

3

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

49

PICTURE CONTROL
ADVANCED - CINEMA MODE
Set up the TV for the best picture appearance for viewing
movies.
When you operate Cinema (3:2 Pull-Down Mode or Cinema
Correction Mode), the TV will adjust 24 fps video from
movies to 30 fps video for display.
This feature operates only in Analog, AV1, AV2, and
Component 480i mode.

SETUP
VIDEO

1

Press the M E N U button and then use D or E or
or
button to select the V I D E O menu.

AUDIO
TIME

PICTURE CONTROL

OPTION

Color Temperature
XD
Advanced
Reset

SCREEN

2

Press the G or
button and then use D or E or
or
button to select A d v a n c e d.

3

Press the G or
button and then use D or E or
or
button to select C i n e m a.

LOCK

1
SETUP
VIDEO
AUDIO
TIME

4

5

50

EZ Picture

Press the G or
button and then use D or E or
or
button to select O n or O f f.

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

OPTION
SCREEN
LOCK

EZ Picture
Color Temperature
XD
Advanced

G

Cinema
Off

Reset
Black level

Low

2

3

4

ADVANCED - BLACK (DARKNESS) LEVEL
Adjusting the contrast and the brightness of the screen
using the black level of the screen.
This feature operates only in AV1, AV2, HDMI1/DVI, or
HDMI2mode.

SETUP

1

Press the M E N U button and then use D or E or
or
button to select the V I D E O menu.

VIDEO
AUDIO
TIME

Color Temperature
XD
Advanced
Reset

SCREEN

2

Press the G or
button and then use D or E or
or
button to select A d v a n c e d.

3

Press the G or
button and then use D or E or
or
button to select B l a c k l e v e l.

LOCK

1

SETUP
VIDEO

4

Press the G or
button and then use D or E or
or
button to select L o w or H i g h.
■ Low
The screen gets darker.
■ High
The screen gets brighter.

AUDIO
TIME
OPTION
SCREEN
LOCK

EZ Picture
Color Temperature
XD
Advanced

G

Cinema
Off

Reset
Black level

Low

2

5

PICTURE CONTROL

OPTION

EZ Picture

3

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

51

PICTURE CONTROL
PICTURE RESET
Use to quickly reset all the Video menu options to their
original factory preset values.

SETUP
VIDEO
AUDIO
TIME
OPTION

1

Press the M E N U button and then use D or
or
button to select the VIDEO menu.

2

button and then use D or E or
Press the G or
or
button to select Reset.

E

XD
Advanced
Reset

LOCK

1
SETUP

AUDIO

PICTURE CONTROL

Press the G or
button to reset the Video menu
options to original values.

Color Temperature

SCREEN

or

VIDEO

3

EZ Picture

TIME
OPTION

EZ Picture
Color Temperature
XD
Advanced
Reset

To set

G

SCREEN
LOCK

2

3

LOW-POWER PICTURE MODE (Only 42PX8DC model)
Low power reduces the plasma display power consumption.
SETUP
VIDEO

1

Press the M E N U button and then use D or E or
or
button to select the OPTION menu.

AUDIO
TIME

Aspect Ratio
Caption/Text
Caption Options
Language

OPTION
SCREEN

ISM Method
Low Power

LOCK

2

Set ID

Press the G or
button and then use D or E or
or
button to select L o w P o w e r.

1

3

Press the G or
button and then use D or E or
or
button to select O n or O f f.

SETUP
VIDEO
AUDIO

■

When you select On, the screen darkens.

TIME
OPTION
SCREEN
LOCK

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID

G

Off
On

2

52

3

IMAGE STICKING MINIMIZATION(ISM) METHOD
A frozen still picture from a PC/video game displayed on
the screen for prolonged periods will result in a ghost
image. Use our unique method to minimize any fixed image
on the screen.

1

Press the M E N U button and then use D or E or
or
button to select the OPTION menu.

2

button and then use D or E or
Press the G or
or
button to select ISM Method.
SETUP
VIDEO

TIME

Caption/Text
Caption Options
Language

OPTION
SCREEN

ISM Method
Low Power

LOCK

■

Set ID

Normal
If image sticking is never a problem, ISM is not necessary
set to Normal.

1
■

White wash
White Wash removes permanent images from the
screen.

SETUP
VIDEO
AUDIO

NOTE

TIME
OPTION

An excessive permanent image may be impossible
to clear entirely with White Wash. To return to
normal viewing, press any button.
■

■

4

Orbiter
Orbiter may help prevent ghost images. However, it
is best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen,
the image will move once per 2 minutes : Left
Right
Upside
Downside
Right
Left
Downside
Upside.

SCREEN
LOCK

PICTURE CONTROL

3

AUDIO

Press the G or
button and then use D or E or
or
button to select either Normal, White Wash,
Orbiter or Inversion.

Aspect Ratio

Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID

G

Normal
White Wash
Orbiter
Inversion

2

3

Inversion
Inversion will automatically invert the plasma display
panel color every 30 minutes.

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

53

SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER (EZ SOUNDRITE)
Scans for changes in sound levels during commercials, then
adjusts the sound to match the specified audio level.
SoundRite makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV
program.

SETUP
VIDEO

1

Press the M E N U button and then use D or E or
or
button to select the A U D I O menu.

AUDIO
TIME
OPTION

Audio Language
EZ SoundRite
EZ Sound
Balance

0

TV Speakers

SCREEN
LOCK

SOUND & LANGUAGE CONTROL

54

2

Press the G or
button and then use D or E or
or
button to select E Z S o u n d R i t e.
1

3

button and then use D or E or
Press the G or
or
button to select O n or O f f.

SETUP
VIDEO
AUDIO
TIME

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

OPTION

Audio Language
EZ SoundRite

G

Balance

Off
On

EZ Sound
0

TV Speakers

SCREEN
LOCK

2

3

PRESET SOUND SETTINGS (EZ SOUND)

EZ Sound lets you enjoy the best sound without any special
adjustment because the TV sets the appropriate sound options
based on the program content.
Normal, Stadium, News, Music and Theater are preset for good
sound quality at the factory and are not adjustable.

1

■

Press E X I T or R E T U R N button to return to TV viewing.

You can also adjust E Z S o u n d in the AUDIO menu.
SETUP
VIDEO
AUDIO
TIME
OPTION

SETUP

Audio Language

VIDEO

EZ SoundRite
AUDIO

EZ Sound
TIME

Balance
TV Speakers

0
OPTION

SCREEN

SCREEN

LOCK

LOCK

Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speakers

G

Normal

0

Stadium

SOUND & LANGUAGE CONTROL

2

Press the E Z S O U N D button repeatedly to select the
appropriate sound setup as below(Except 42PG60C,
42PG65C models):
N o r m a l, S t a d i u m, N e w s, M u s i c, T h e a t e r, and U s e r
(your own settings).

News
Music
Theater
User

55

SOUND &LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
SETUP
VIDEO

1

Press the M E N U button and then use D or E or
or
button to select the A U D I O menu.

AUDIO
TIME
OPTION

Audio Language
EZ SoundRite
EZ Sound
Balance

0

TV Speakers

SCREEN
LOCK

2

Press the G or
button and then use D or E or
or
button to select E Z S o u n d.
1

3

button and then use D or E or
Press the G or
or
button to select U s e r.

SETUP
VIDEO
AUDIO
TIME
OPTION

4
SOUND & LANGUAGE CONTROL

Press the G or
button and then use D or E or
or
button to select the desired sound option
T r e b l e, B a s s, or F r o n t S u r r o u n d).
(T

Audio Language
Normal

EZ SoundRite

Stadium

EZ Sound
Balance

0

News
Music

TV Speakers

SCREEN

Theater

LOCK

User

G

2

5

Press the G or
button and then use F or G or
or
button to make appropriate adjustments.
Selecting the Front surround
button and then use F or G or
Press the G or
or
button to select O f f or 3 D E c h o S o u n d
S y s t e m.

6

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

3

SETUP
VIDEO

User

AUDIO

Treble

50

Bass

50

TIME
OPTION

Front Surround

G

Off

SCREEN
LOCK

4

SETUP
VIDEO
AUDIO
TIME

Front Surround

Off

OPTION

3D EchoSound System
Creates a stunning simulated stereo effect from any mono
sound and a realistic three-dimensional sound with a very
wide and deep sound stage.

SCREEN
LOCK

5

56

BALANCE ADJUSTMENT
Adjust the left/right sound of speaker to suit your taste and
room situations.

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the A U D I O menu.

AUDIO
TIME
OPTION

Audio Language
EZ SoundRite
EZ Sound
Balance

0

TV Speakers

SCREEN
LOCK

SOUND & LANGUAGE CONTROL

2

Press the G or
button and then use D or E or
or
button to select B a l a n c e.
1

3

Press the G or
button and then use F or G or
or
button to make appropriate adjustments.

SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

Audio Language
EZ SoundRite
EZ Sound
Balance

0

G

L

R

TV Speakers

SCREEN
LOCK

2

SETUP
VIDEO
AUDIO
TIME
OPTION

Audio Language
EZ SoundRite
EZ Sound
Balance

0

F

L

R

G

TV Speakers

SCREEN
LOCK

3

57

SOUND &LANGUAGE CONTROL
TV SPEAKERS ON/OFF SETUP
Turn the TV speakers off if using external audio equipment.

SETUP

1

Press the M E N U button and then use D or E or
or
button to select the A U D I O menu.

VIDEO
AUDIO
TIME
OPTION

Audio Language
EZ SoundRite
EZ Sound
Balance

0

TV Speakers

SCREEN

SOUND & LANGUAGE CONTROL

58

2

Press the G or
button and then use D or E or
or
button to select T V S p e a k e r s.

3

Press the G or
button and then use D or E or
or
button to select O n or O f f.

LOCK

1
SETUP
VIDEO
AUDIO
TIME

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

OPTION
SCREEN

Audio Language
EZ SoundRite
EZ Sound
Balance
TV Speakers

G

Off
On

LOCK

2

3

STEREO/SAP BROADCAST SETUP
This TV can receive MTS stereo programs and any SAP
(Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well
as the original one and when you select Stereo or SAP on the
remote control.
Mono sound is automatically received if the broadcast is only in
Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to the mono sound in remote
areas during stereo/SAP broadcasting.
Stereo or SAP can be received in Analog channel.

1

Press E X I T or R E T U R N button to save and return to TV
viewing.

SOUND & LANGUAGE CONTROL

2

Use the S A P button to select your desired MTS mode in
analog signal. Each time you press the S A P button, M o n o,
S t e r e o, or S A P appear in turn.
■ If other languages available on the digital signal, select
them with the S A P button.

59

SOUND &LANGUAGE CONTROL
AUDIO LANGUAGE
Other languages may be available if a digital signal is provided
by the broadcasting station.
This feature operates only in DTV/CADTV mode.

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the A U D I O menu.

AUDIO
TIME
OPTION

Audio Language
EZ SoundRite
EZ Sound
Balance

0

TV Speakers

SCREEN
LOCK

SOUND & LANGUAGE CONTROL

60

2

Press the G or
button and then use D or E or
or
button to select A u d i o L a n g u a g e.
1

3

Press the G or
button and then use D or E or
or
button to select: E n g l i s h, S p a n i s h, or
F r e n c h.

SETUP
VIDEO
AUDIO
TIME

Audio Language
EZ Sound
Balance

G

English
Spanish
French

TV Speakers

OPTION
SCREEN

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

LOCK

2

3

ON-SCREEN MENUS LANGUAGE SELECTION
The menus can be shown on the screen in the selected language. First select your language.

SETUP

1

Aspect Ratio

VIDEO

Press the M E N U button and then use D or E or
or
button to select the O P T I O N menu.

Caption/Text

AUDIO

Caption Options

TIME

Language
OPTION

ISM Method

SCREEN

Low Power

LOCK

Set ID

Press the G or
button and then use D or E or
or
button to select L a n g u a g e .

1

3

Press the G or
button and then use D or E or
or
button to select your desired language.
From this point on, the on-screen menus will be shown
in the selected language.

SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
LOCK

4

Press the E X I T or R E T U R N button to return to TV
viewing or press M E N U to return to the previous
menu.

Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power

G

English
Spanish
French

Set ID

2

3

SOUND & LANGUAGE CONTROL

2

61

SOUND &LANGUAGE CONTROL
CAPTION / TEXT
Analog Broadcasting System Captions
Select a caption mode for displaying captioning information if provided on a
program. Analog caption displays information at any position on the screen and
is usually the program's dialog.
Text displays information, usually at the bottom position and is used for a data
service, generally not program related.
Caption/Text, if provided by the broadcaster, would be available for both digital
and analog channels on the Antenna/Cable.
This TV is programmed to memorize the caption/text mode which was last set
when you turn the power off.
When you select the CC1 ~ Text4, Caption options must be disabled.

1

Use the C C button repeatedly to select Caption O f f, C C 1, C C 2, C C 3,
C C 4, T e x t 1, T e x t 2, T e x t 3 or T e x t 4.

SOUND & LANGUAGE CONTROL

CAPTION
The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.
■ TEXT
The term for the words that appear in a large black frame and almost cover
the entire screen; usually messages provided by the broadcaster.
■

2
■

Press E X I T or R E T U R N to save and return to TV viewing.

T e x t.
You can also use the O P T I O N menu to select C a p t i o n/T
SETUP
VIDEO
AUDIO
TIME

Aspect Ratio
Caption/Text
Caption Options
Language

OPTION
SCREEN

ISM Method
Low Power

LOCK

Set ID

62

SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
LOCK

Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID

G

Off
CC1
CC2
CC3
CC4
Text1
Text2
Text3
Text4

Digital Broadcasting System Captions
Choose the language you want the DTV/CADTV Captions
to appear in.
Other Languages can be chosen for digital sources only if
they are included on the program.

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the O P T I O N menu.

AUDIO
TIME

Aspect Ratio
Caption/Text
Caption Options
Language

OPTION
SCREEN

Low Power

LOCK

Press the G or
button and then use D or E or
T e x t.
or
button to select C a p t i o n/T

Set ID

1

3

Press the G or
button and then use D or E or
or
button to select available caption languages:
E n g l i s h, S p a n i s h, or F r e n c h.

SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

SCREEN
LOCK

Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method

G

Off
English
Spanish
French

Low Power
Set ID

2

3

SOUND & LANGUAGE CONTROL

2

ISM Method

63

SOUND &LANGUAGE CONTROL
CAPTION OPTIONS
Customize the DTV/CADTV captions that appear on your
screen.

SETUP
VIDEO

Press the M E N U button and then use D or E or
or
button to select the O P T I O N menu.

1

AUDIO
TIME

Aspect Ratio
Caption/Text
Caption Options
Language

OPTION
SCREEN

ISM Method
Low Power

LOCK

Set ID

SOUND & LANGUAGE CONTROL

Press the G or
button and then use D or E or
or
button to select C a p t i o n O p t i o n s.

2

1

Press the G or
button and then use D or E or
or
button to select C u s t o m.

3

SETUP
VIDEO
AUDIO

Press the G or
button and then use D or E or
or
button to customize the S t y l e, F o n t, etc.,
to your preference.
A preview icon is provided at the bottom of the
screen, use it to see the caption language.

4

S i z e: Set the word size.
G F o n t: Select a typeface for the text.
G Text Color: Choose a color for the text.
G Text Opacity: Specify the opacity for the text color.
G B g (Background) C o l o r: Select a background color.
G B g (Background) O p a c i t y: Select the opacity for the
background color.
G Edge Type: Select an edge type.
G Edge Color: Select a color for the edges.

TIME

Aspect Ratio
Caption/Text
Caption Options

G

OPTION
SCREEN
LOCK

Set by Program
Custom

Language
ISM Method
Low Power
Set ID

G

5

64

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

2

3

SETUP
VIDEO

Size

AUDIO

Font

Font 0

Text Color

White

TIME

F

A Standard

OPTION

Text Opacity

Solid

SCREEN

Bg Color

Black

LOCK

Bg Opacity

Solid

Edge Type

None

Edge Color

Black

G

4

TIME SETTING
CLOCK SETTING
Auto Clock Setup
The time is set automatically from a digital channel signal.
The digital channel signal includes information for the
current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly
by the auto clock function.
The factory default value of the Auto Clock is Off, because
a clock information sent each broadcasting station is different.

1

Press the M E N U button and then use D or E or
or
button to select the T I M E menu.

SETUP

Auto Clock

VIDEO

Manual Clock
AUDIO

Off Timer
TIME

On Timer

2

4

Auto Off

SCREEN
LOCK

Press the G or
button and then use D or E or
or
button to select O n.

Press the G or
button and then use D or E or
or
button to select your viewing area time zone
U.S.A : Eastern, Central, Mountain, Pacific, Alaska or
Hawaii.
Canada : Eastern, Central, Mountain, Pacific,
New F.land or Atlantic.

5

button and then use D or E or
Press the G or
or
button to select A u t o, O f f, O n, depending on
whether or not your viewing area observes Daylight
Saving time.

6

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

1

SETUP

Auto Clock

VIDEO

Manual Clock

G

Off
On

TIME SETTING

3

OPTION

Press the G or
button and then use D or E or
or
button to select A u t o C l o c k.

AUDIO

Off Timer
TIME

Time Zone

On Timer
OPTION
SCREEN

Auto Off

Eastern
Daylight Savings
Auto

LOCK

2

3

4

5

65

TIME SETTING

Manual Clock Setup
If the current time setting is wrong, reset the clock manually.

SETUP

1

Press the M E N U button and then use D or E or
or
button to select the T I M E menu.

Auto Clock

VIDEO

Manual Clock
AUDIO

Off Timer
TIME

On Timer
OPTION

Auto Off

SCREEN

2

Press the G or
button and then use D or E or
or
button to select M a n u a l C l o c k.

3

Press the G or
button and then use F or G or
or
to select either the year, date, or time option.
or
button to
Once selected, use the D or E or
set the year, date, and time option.

LOCK

1

TIME SETTING

SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

LOCK

Auto Clock
Manual Clock

G

Year
----

Off Timer
On Timer
Auto Off

Date
-Time
--

/

--

:

--

--

2

66

3

AUTO ON/OFF TIMER SETTING
The timer function operates only if the current time has
been set.
The Off-Timer function overrides the On-Timer function if
they are both set to the same time.
The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV
turns on with the On Timer function, the TV will automatically
revert to standby mode.

1

Press the M E N U button and then use D or E or
or
button to select the T I M E menu.

SETUP

Auto Clock

VIDEO

Manual Clock
AUDIO

Off Timer
TIME

On Timer
OPTION

Press the G or
button and then use D or E or
or
button to select O f f T i m e r or O n T i m e r.

3

Press the G or
button and then use D or E or
or
button to select O n.
■ To cancel the O n / O f f t i m e r function, select O f f.

LOCK

1

SETUP
VIDEO
AUDIO

4

button and then use D or E or
Press the G or
or
button to set the hour.

Auto Off

SCREEN

TIME
OPTION

Auto Clock
Manual Clock
Off Timer
On Timer
Auto Off

G

Off
On

SCREEN

6 : 30 AM

LOCK

5

Press the G or
button and then use D or E or
or
button to set the minutes.
2

6

TIME SETTING

2

3

4

5

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

67

TIME SETTING
AUTO SHUT-OFF SETTING
If set to on and there is no input signal, the TV turns off
automatically after 10 minutes.

SETUP

1

Auto Clock

VIDEO

Press the M E N U button and then use D or E or
or
button to select the T I M E menu.

Manual Clock
AUDIO

Off Timer
TIME

On Timer
OPTION

Auto Off

SCREEN

2

LOCK

Press the G or
button and then use D or E or
or
button to select A u t o O f f.

1

TIME SETTING

3

Press the G or
button and then use D or E or
or
button to select O n or O f f.

SETUP

Auto Clock

If set to On and there is

Manual Clock

no input signal, the TV

VIDEO
AUDIO

turns automatically

Off Timer

4

after 10 minutes.

TIME

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

On Timer
OPTION
SCREEN

Auto Off

G

Off
On

LOCK

2

68

3

SLEEP TIMER SETTING
The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.

1

Press the T I M E R button repeatedly to select the number of
minutes. First the O f f option appears on the screen, followed
by the following sleep timer options: 10, 20, 30, 60, 90,
120, 180, and 240 minutes.

When the number of minutes you want is displayed on the
screen, press the E N T E R button. The timer begins to count
down from the number of minutes selected.

3

To check the remaining minutes before the TV turns off, press
the T I M E R button once.

4

To cancel the Sleep Timer, press the T I M E R button repeatedly
to select O f f.

TIME SETTING

2

69

SCREEN ADJUSTMENT
AUTO CONFIGURE (RGB [PC] MODE ONLY)
Automatically adjusts picture position and minimizes image
shaking.
Although the image is still not correct, your set is functioning
properly but needs further adjustment.

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the S C R E E N menu.

AUDIO
TIME

Auto config.
Manual config.
XGA Mode
Reset

OPTION
SCREEN
LOCK

2

Press the G or
button and then use D or E or
or
button to select A u t o c o n f i g ..
1

SCREEN ADJUSTMENT

3

button to start A u t o c o n f i g ..
SETUP

When A u t o c o n f i g . has finished, O K will be
shown on screen.
■ If the position of the image is still not correct, try
Auto adjustment again.
■

VIDEO
AUDIO
TIME

Auto config.

G

To set

Manual config.
XGA Mode
Reset

OPTION
SCREEN
LOCK

4

5

70

Press the G or

If the picture needs to be adjusted more after Auto
adjustment in RGB (PC), you can adjust the M a n u a l
c o n f i g ..

Press the E X I T or R E T U R N button to return to TV
viewing or press the M E N U button to return to the
previous menu.

2 3

MANUAL CONFIGURE
If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase
manually.
This function works in the following mode: RGB-PC, RGB-DTV,
Component 480p/720p/1080i, HDMI 480p/720p/1080i.
The Phase, Clock functions work in the following mode:
RGB-PC mode.

1

Press the M E N U button and then use D or E or
or
button to select the S C R E E N menu.
SETUP
VIDEO
AUDIO

2

TIME

Press the G or
button and then use D or E or
or
button to select M a n u a l c o n f i g ..

Auto config.
Manual config.
XGA Mode
Reset

OPTION
SCREEN
LOCK

3

Press the G or
button and then use D or E or
or
button to select P h a s e, C l o c k, H - p o s i t i o n or V - p o s i t i o n.
■

4

Press the F or G or
priate adjustments.

or

5

Press the E X I T or R E T U R N button to return to TV
viewing or press the M E N U button to return to the
previous menu.

SETUP
VIDEO
AUDIO
TIME
OPTION

Auto config.
Manual config.

Phase

0

XGA Mode

Clock

0

Reset

H-Position

0

V-Position

0

G

SCREEN
LOCK

SCREEN ADJUSTMENT

Phase
This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
■ Clock
This function is to minimize any vertical bars or
stripes visible on the screen background. And the
horizontal screen size will also change.
■ H-position / V-position
This function is to adjust picture to left/right and
up/down as you prefer.

1

2 3 4

button to make appro-

71

SCREEN ADJUSTMENT
SELECTING XGA MODE
To see a normal picture, match the resolution of RGB mode and
selection of XGA mode.
This function works in the following mode: RGB-PC mode.
If you select the 1600x1200, 1920x1200 resolution, u X G A
m o d e is displayed.

SETUP
VIDEO

1

Press the M E N U button and then use D or E or
or
button to select the S C R E E N menu.

AUDIO
TIME

Auto config.
Manual config.
XGA Mode
Reset

OPTION
SCREEN
LOCK

2

Press the G or
button and then use
or
button to select X G A m o d e.

D

or E or

1

SCREEN ADJUSTMENT

3

Press the G or
button and then use D or E or
or
button to select the desired XGA resolution.

SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

SCREEN
LOCK

Auto config.
Manual config.
XGA Mode
Reset

G

1024 x 768
1280 x 768
1360 x 768
1366 x 768

2 3

72

INITIALIZING
(RESET TO ORIGINAL FACTORY SETTINGS)
This function operates in current mode.
To initialize the adjusted value.

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the S C R E E N menu.

AUDIO
TIME

Auto config.
Manual config.
XGA Mode
Reset

OPTION
SCREEN
LOCK

2

Press the G or
button and then use
or
button to select R e s e t.

D

or E or

1

3

Press the G or

button.
SETUP

AUDIO
TIME

Auto config.
Manual config.
XGA Mode
Reset

G

To set

OPTION
SCREEN
LOCK

2 3

SCREEN ADJUSTMENT

VIDEO

73

PARENTAL CONTROL / RATINGS
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings
sent by the broadcasting station. The default setting is to allow all programs to be viewed.
Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be
done:
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock

V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television
movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown
at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.

Ratings for Television programs including made-for-TV movies:
TV-G
■ TV-PG
■ TV-14
■

(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)

PARENTAL CONTROL / RATING

SET PASSWORD & LOCK SYSTEM
Setting up your password
Set up blocking schemes to block specific channels, ratings, and
external viewing sources.
A password is required to gain access to this menu.

1

Press the M E N U button and then use the D or E or
or
button to select the L O C K menu. Then, press the G
or
button.
Enter the password as requested.
■ The TV is set up with the initial
password “0-0-0-0”.
■

74

TV-MA (Mature audience only)
(All children)
■ TV-Y
■ TV-Y7 (Children 7 years older)
■

Enter
Password
Enter
Password

*

*

*

*

Set Password
Change the password by inputting a new password twice.

For USA
SETUP

After inputting the password, use the D or E or
or
button to choose S e t p a s s w o r d.

1

VIDEO
AUDIO
TIME
OPTION

Press the G or
button and then choose any 4
digits for your new password.
As soon as the 4 digits are entered, re-enter the same
4 digits on the C o n f i r m.
Then your changed password has been memorized.

2

Press E X I T or R E T U R N to return to TV viewing or
press M E N U to return to the previous menu.

3

SCREEN

Set Password

Set Password

Block Channel

Block Channel

TV Rating-English

Movie Rating

TV Rating-French

TV Rating-Children

Aux. Block

TV Rating-General

Downloadable Rating

Aux. Block
Downloadable Rating

1
SETUP
VIDEO
AUDIO

OPTION

G

Lock System

Lock System

LOCK

TIME

NOTE

For Canada

SCREEN
LOCK

Lock System
Set Password

G

Block Channel

New
Confirm

* * * *
* * * *

Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating

If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’
on the remote control.

2

Lock System
Enables or disables the blocking scheme you set up previously.

For USA
SETUP

AUDIO
TIME

1

After inputting the password, use the D or E or
or
button to choose L o c k S y s t e m.

OPTION
SCREEN

SETUP

Lock System

VIDEO

Set Password

AUDIO

Block Channel

Lock System
Set Password
Block Channel

TIME

Movie Rating

TV Rating-English

OPTION

TV Rating-French

SCREEN

Aux. Block

TV Rating-Children
TV Rating-General

LOCK

LOCK

Aux. Block

Downloadable Rating

Downloadable Rating

2

Press the G or
button and then use the D or E
or
or
button to select O n or O f f.
1
■

When you select O n, the Lock System is enable.

SETUP
VIDEO

3

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

AUDIO
TIME
OPTION
SCREEN
LOCK

Lock System

G

Set Password

Off
On

Block Channel

PARENTAL CONTROL / RATING

VIDEO

For Canada

Movie Rating
TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating

2

75

PARENTAL CONTROL /RATINGS
CHANNEL BLOCKING
Blocks any channels that you do not want to watch or that
you do not want your children to watch.

For USA
SETUP
VIDEO
AUDIO
TIME

1

After inputting the password, use the D or E or
or
button to choose B l o c k C h a n n e l.

OPTION
SCREEN

For Canada
Lock System

Lock System

Set Password

Set Password

Block Channel

Block Channel

TV Rating-English

Movie Rating

TV Rating-French

TV Rating-Children

Aux. Block

TV Rating-General

LOCK

Downloadable Rating

Aux. Block

2

Downloadable Rating

Press the G or
button. You will now see a screen
filled with channel numbers and a preview picture.

1

3

Use D E F G or
button to select a
channel and then use the E N T E R button to block or
unblock it.

SETUP
VIDEO
AUDIO
TIME
OPTION

4

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

SCREEN
LOCK

Lock System
Set Password
Block Channel

G

Movie Rating

Off
On

TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating

1

2

EXTERNAL INPUT BLOCKING
For USA
Enables you to select a source to block from the external
source devices you have hooked up.

SETUP
VIDEO
AUDIO
TIME

PARENTAL CONTROL / RATING

OPTION
SCREEN

For Canada
Lock System

Lock System

Set Password

Set Password

Block Channel

Block Channel

TV Rating-English

Movie Rating

TV Rating-French

TV Rating-Children

Aux. Block

TV Rating-General

LOCK

Downloadable Rating

Aux. Block

1

After inputting the password, use the D or E or
or
button to choose A u x . B l o c k.

2

Press the G or
button and then use the F or G
or
or
button to select a source.

Downloadable Rating

1
SETUP
VIDEO
AUDIO

3

Press the G or
button and then use the D or E
or
or
button to select O n or O f f on the
each source.

TIME

Lock System
Set Password
Block Channel
Movie Rating

AV1

TV Rating-Children

AV2

On

TV Rating-General

Component

Off

RGB

Off

OPTION
SCREEN
LOCK

Aux. Block

G

Downloadable Rating

4

76

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

On

HDMI1/DVI

On

HDMI2

Off

2

3

MOVIE & TV RATING
Movie Rating (MPAA) -for USA only
Blocks movies according to the movie ratings limits specified, so children cannot view
certain movies. You can set the ratings limit by blocking out all the movies with the
ratings above a specified level. Keep in mind that the movie ratings limit only applies
to movies shown on TV, not TV programs, such as soap operas.
SETUP
VIDEO

After inputting the password, use the D or E or
or
button to choose M o v i e R a t i n g.

1

AUDIO
TIME
OPTION

Press the G or
button and then use the D or E
or
or
button to select G , P G, P G - 1 3, R ,
N C - 1 7 or X .
■ G (General audiences)
■ PG (Parental guidance suggested)
■ PG-13 (Parents strongly cautioned)
■ R (Restricted)
■ NC-17 (No one 17 and under admitted)
■ X (Adult only)
■ Blocking Off (Permits all programs)

2

G

SCREEN

Movie Rating
TV Rating-Children
TV Rating-General

Downloadable Rating

1
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN
LOCK

If you set PG-13: G and PG movies will be available,
PG-13, R, NC-17 and X will be blocked.

Lock System
Set Password
Block Channel
Movie Rating

G

TV Rating-Children
TV Rating-General
Aux. Block
Downloadable Rating

For USA
SETUP
VIDEO

TIME
OPTION
SCREEN

or

Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General

LOCK

Aux. Block

G
PG
PG-13
R
NC-17
X
Blocking Off

2

For Canada
Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block

Downloadable Rating

Downloadable Rating

button and then use the D or E or
Press the G or
or
button to select D i m 0, D i m 1, D i m 2, or D i m 3.

2

1
SETUP

Press the
or
or

3

G

VIDEO

or
button and then use the D or E
button to select D 1 L 1, D 1 L 2, or D 1 L 3.

AUDIO
TIME
OPTION

4

Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.

SCREEN
LOCK

Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General

Downloadable Rating
Dim0
Dim1
Dim2
Dim3

PARENTAL CONTROL / RATING

Downloadable Rating
After inputting the password, use the D or E or
button to choose D o w n l o a d a b l e R a t i n g.

Block Channel

Aux. Block

AUDIO

1

Set Password

LOCK

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

3

Lock System

Aux. Block
Downloadable Rating G

NOTE
G
G

This function may become available in the future and
will be available only for digital channel signal.
This function operates only when TV has received
Region5 Rating data.

2

G

Based on rating table, your TV's OSD (On
Screen Display) may differ slightly from what
is shown in this manual.

77

PARENTAL CONTROL /RATINGS
TV Rating Children -for USA only
Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs.
Unless you block certain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.

SETUP
VIDEO
AUDIO
TIME
OPTION

1
2

After inputting the password, use the D or E or
button to choose T V R a t i n g - C h i l d r e n.

SCREEN

or

Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General

LOCK

Aux. Block
Downloadable Rating

button and then use the D or E or
Press the G or
or
button to select A g e, or F a n t a s y V i o l e n c e.
button and then use the D or E or
Press the G or
or
button to select block options.

1
SETUP
VIDEO
AUDIO

Age (applies to TV-Y, TV-Y7)
■ Fantasy Violence (applies to TV-Y7)

■

TIME
OPTION
SCREEN

Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children

G

TV Rating-General

Age
Fantasy Violence

LOCK

3

Aux. Block

Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.

Downloadable Rating

2

TV Rating General -for USA only
Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
SETUP

PARENTAL CONTROL / RATING

1

After inputting the password, use the D or E or
button to choose T V R a t i n g - G e n e r a l.

VIDEO

or

AUDIO
TIME
OPTION

2

button and then use the D or E or
Press the G or
or
button to select A g e, D i a l o g u e, L a n g u a g e,
S e x or V i o l e n c e.
button and then use the D or E or
Press the G or
or
button to select block options.
Age (applies to TV-G,TV-PG,TV-14,TV-MA)
■ Dialogue-sexual dialogue (applies to TV-PG,TV-14)
■ Language-adult language (applies to TV-PG,TV-14,TV-MA)
■ Sex-sexual situations (applies to TV-PG,TV-14,TV-MA)
■ Violence (applies to TV-PG,TV-14,TV-MA)
■

SCREEN

Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.

Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General

LOCK

Aux. Block
Downloadable Rating

1
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN

Lock System
Set Password
Block Channel
Movie Rating
TV Rating-Children
TV Rating-General

G

LOCK

Aux. Block

3

Lock System

Downloadable Rating

Age
Dialogue
Language
Sex
Violence

2

78

TV Rating English - for CANADA only
Prevents children from watching certain children's TV programs, according to
the ratings limit set. The children rating does not apply to other TV programs.
Unless you block certain TV programs intended for mature audiences in the TV
Rating - sub menu, your children can view those programs.

SETUP
VIDEO
AUDIO
TIME
OPTION

1
2

After inputting the password, use the D or E or
button to choose T V R a t i n g - E n g l i s h.

or

Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block

LOCK

Downloadable Rating

Press the G or
button and then use the D or E or
or
button to select E, C, C 8 +, G, P G, 1 4 +, 1 8 +,
or Blocking Off.
E(Exempt)
C(Children)
■ C8+(Children eight years and older)
■ G(General programming, suitable for all audiences)
■ PG(Parental Guidance )
■ 14+(Viewers 14 years and older)
■ 18+(Adult programming)
■ Blocking Off(Permits all programs)
■

1
SETUP
VIDEO

■

3

SCREEN

Lock System

AUDIO
TIME
OPTION
SCREEN

Lock System
Set Password
Block Channel
TV Rating-English

G

TV Rating-French
Aux. Block

LOCK

Downloadable Rating

E
C
C8+
G
PG
14+
18+
Blocking Off

2

Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.

TV Rating French - for CANADA only
Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
After inputting the password, use the D or E or
button to choose T V R a t i n g - F r e n c h.

or

SETUP
VIDEO
AUDIO
TIME

2

button and then use the D or E or
Press the G or
or
button to select E, G, 8 ans+, 13 ans+, 16 ans+,
18 ans+, or Blocking Off.
■ E(Exempt)
■ G(General)
■ 8 ans+(General-Not convenient for little children)
■ 13 ans+(Not convenient for children of 13 years and
younger)
■ 16 ans+(Not convenient for children of 16 years and
younger)
■ 18 ans+(This programs is only for adults)
■ Blocking Off(Permits all programs)

OPTION
SCREEN

Press E X I T or R E T U R N button to return to TV viewing
or press M E N U button to return to the previous menu.

Set Password
Block Channel
TV Rating-English
TV Rating-French
Aux. Block

LOCK

Downloadable Rating

1
SETUP
VIDEO
AUDIO
TIME
OPTION
SCREEN

Lock System
Set Password
Block Channel
TV Rating-English
TV Rating-French

G

Aux. Block

LOCK

Downloadable Rating

3

Lock System

PARENTAL CONTROL / RATING

1

E
G
8 ans+
13 ans+
16 ans+
18 ans+
Blocking Off

2

79

APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.

■

The remote control
doesn’t work

Power is suddenly
turned off

Is the sleep timer set?
■ Check the power control settings. Power interrupted.
■ No broadcast on station tuned with Auto off activated.
■

The video function does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■

No picture &No sound

Picture appears slowly
after switching on

■

This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.

Adjust Color in menu option.
■ Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■

APPENDIX

No or poor color
or poor picture

Horizontal/vertical bars
or picture shaking

■

Check for local interference such as an electrical appliance or power tool.

Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■

Poor reception on
some channels

Lines or streaks
in pictures

80

■

■

Check antenna (Change the direction of the antenna).

The audio function does not work.
Press the VOL or VOLUME button.
■ Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■

Picture OK & No sound

No output from one
of the speakers
Unusual sound from
inside
the product

■

Adjust Balance in menu option.

■

A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.

There is a problem in PC mode. (Only PC mode applied)

The signal is out of range

Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position

Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.

■

Work the Auto configure or adjust clock, phase, or H/V position. (Option)

■

Check the signal cable.
Reinstall the PC video card.

■

APPENDIX

Screen color is unstable
or single color

■

■

81

APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen
1

Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.

2

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ Please be sure not to use a wet cloth.
■

Extended Absence
CAUTION
G

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height
x Depth)

APPENDIX

Weight

42PG65C
(42PG65C-UA)
41.1 x 28.9 x12.1 inches
1044.4 x 735.4 x 308.0 mm

With stand
(Only 42PG65C)

Without stand

With stand (Only 42PG65C)
Without stand
MODELS

82

42PG60C
(42PG60C-UA)

41.1 x 26.7x 3.1 inches
1044.4 x680.5x 79.6mm

41.1 x 26.7x 4.2 inches
1044.4 x680.5x 107.6mm

55.1 pounds / 25.0 kg

61.2 pounds / 27.8 kg
55.1 pounds / 25.0 kg

32LG500H
(32LG500H-UA)

37LG500H
(37LG500H-UA)

42LG500H
(42LG500H-UA)

36.1 x 26.9 x 11.5 inches 40.4 x 28.8 x 11.5 inches
918.6 x 684.8 x 293.4 mm 1026.2 x 734.0 x 293.4 mm

Dimensions
(Width x Height
x Depth)

With stand

31.3 x 23.5 x 8.9 inches
797 x 597 x 227.3 mm

Without stand

31.3 x 21.9 x 3.9 inches
797 x 558.6 x 100.5 mm

36.1 x 24.9 x 3.4 inches
918.6 x 632.8 x 88 mm

40.4 x 27.0 x 4.4 inches
1026.2 x 687.9 x 111.8 mm

Weight

With stand
Without stand

21.6 pounds / 9.82 kg
18.3 pounds / 8.34 kg

41.6 pounds / 18.8 kg
35.2 pounds / 15.9 kg

49.1 pounds / 22.3 kg
43.2 pounds / 19.6 kg

PRODUCT SPECIFICATIONS
32LC5DC/S/B
(32LC5DC/S/B-UA)
32LC50C/S/B
(32LC50C/S/B-UA)

37LC5DC/1/B
(37LC5DC/1/B-UA)
37LC50C/B
(37LC50C/B-UA)

42LC5DC
(42LC5DC-UA)
42LC50C
(42LC50C-UA)

32LX5DC/S
(32LX5DC/S-UA)
32LX50C/S
(32LX50C/S-UA)

Width x Height x Depth
(inches/mm)

With Stand

31.8 x 23.9 x 9.8 inches
806.6 x 607.5 x 249.0 mm
31.8 x 21.7 x 3.8 inches
806.6 x 552.3 x 97.2 mm

Without Stand

33.7 pounds / 15.3kg
27.6 pounds / 12.5 kg

Weight (pounds / kg)

With Stand
Without Stand

Width x Height x Depth
(inches/mm)

With Stand

36.5 x 27.4 x 10.4 inches
926.8 x 695.8 x 264.6 mm

Without Stand

36.5 x24.8 x 4.2 inches
926.8 x 629.8 x 107.4 mm

Weight (pounds / kg)

With Stand
Without Stand

47.2 pounds / 21.4 kg
36.8 pounds / 16.7 kg

Width x Height x Depth
(inches/mm)

With Stand

40.7 x 29.6 x 11.6 inches
1033.1 x 750.7 x 294.2 mm

Without Stand

40.7 x 27.0x 4.3 inches
1033.1 x 686.5 x 110.2 mm

Weight (pounds / kg)

With Stand
Without Stand

61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg

Width x Height x Depth
(inches/mm)

With Stand

36.3 x 24.2 x 11.3 inches
922.0 x 615.0x 288.0 mm

Without Stand

36.3 x 21.5 x 3.9 inches
922.0 x 546.0 x 98.0 mm

Weight (pounds / kg)

With Stand

39.0 pounds / 17.7 kg
30.4 pounds / 13.8 kg

Without Stand
Width x Height x Depth
(inches/mm)

42PX8DC
(42PX8DC-UA)
Weight (pounds / kg)

With Stand

46.7 x 28.1 x 10.6 inches
1186.0 x 714.0 x 270.0 mm

Without Stand

46.7 x 25.7 x 3.9 inches
1186.0 x 654.0 x 99.0 mm

With Stand

72.5 pounds / 32.9 kg
55.6 pounds / 25.2 kg

Without Stand
Width x Height x Depth
(inches/mm)

With Stand
Without Stand

Weight (pounds / kg)

40.7 x 29.6 x 11.6 inches
1033.1 x 750.7 x 294.2 mm
40.7 x 27.0x 4.3 inches
1033.1 x 686.5 x 110.2 mm
61.3 pounds / 27.8 kg
47.2 pounds / 21.4 kg

With Stand
Without Stand

Power requirement

AC100-240V ~ 50/60Hz

Television System

NTSC-M, ATSC, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

External Antenna Impedance
Operating Temperature Range

■

75 ohm
32 ~ 104°F (0 ~ 40°C)

Operating Humidity Range

Less than 80%

Storage Temperature Range

-4 ~ 140°F (-20 ~ 60°C)

Storage Humidity Range

APPENDIX

42LB5DC
(42LB5DC-UA)
42LB50C
(42LB50C-UA)

Less than 85%

The specifications shown above may be changed without prior notice for quality improvement.

83

APPENDIX
PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.

Programming a code into a remote mode
1

To find out whether your remote control can operate each device without programming, turn on the device
(such as a VCR) and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off and it responds properly the remote control
need not be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below.

2

Press the M E N U and M U T E button continuously at the same time for two seconds; the currently selected
device button is illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,
you have to repeat from step 2.

3

Enter the appropriate code from the code table on the following pages. When pressing the button, the
light blinks at a time. If the device turned off, the programming is successful.

4

Press the M E N U button to store the code. After blinking twice, this code is stored.

5

Test the remote control functions to see if the device responds properly. If not, steps 2-5.

APPENDIX

Remote Control Code
DVD
Brand

Codes

APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024

84

014
006
027
010 016 025

Brand

Codes

Brand

Codes

MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN

002
023
008
003
013
004
021
005

RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH

005
011
007
005
019
009
010

017
009
026
006

006
015
006
008
018
016 025

VCR
Brand
AIWA
AKAI

Codes

Codes

Brand

MAGNAVOX

031 033 034 041
067 068
012 031 033 067

SAMSUNG

043 046 124
146
MARANTZ

069

033
023
037
031

103
039 043
129
033

MARTA
MATSUI
MEI
MEMOREX

040
033
007
108
116

135
041
010 064
110 111
117 119

MGA
MINOLTA
MITSUBISHI

101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133

023 039 043
053
017
031
037
131
008

025
034
046
138
009

033
109
136
012
018
063
033
033
013
066

063 072
144 147

031
050
150
034
048
012
106

027
035
101
153
010

045
026 034
137 150

015 033
101
033 043
055 060
152
039 043

MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
PANASONIC

PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA

REALISTIC
013 020
114 123

009 013 014
034 101 106

RICO
RUNCO
SALORA

013
063
031
031
067
101
013
108
072
011
033
013
040
107
145
003
031
053
058
148
014

030
033
010
034
102
046
020
020
051

014 031
053 072
134 139
059
045 046
059 061

040
034
023 039 043

054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048

014
066
020
041
109
147
008
033
054

075
033
062
140

145
034
063
144

010 014
034 040
101

Codes

032
105
113
125
SANSUI
022
SANYO
003
102
SCOTT
017
131
SEARS
003
013
031
101
SHARP
031
SHINTOM
024
SONY
003
056
077
SOUNDESIGN
034
STS
013
SYLVANIA
031
067
SYMPHONIC
034
TANDY
010
TATUNG
039
TEAC
034
TECHNICS
031
TEKNIKA
019
101
THOMAS
034
TMK
006
TOSHIBA
008
059
TOTEVISION
040
UNITECH
040
VECTOR RESEARCH 012
VICTOR
048
VIDEO CONCEPTS 012
VIDEOSONIC
040
WARDS
003
031
053
YAMAHA
012
ZENITH
034
058

040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149

033 034 059

034
043
039 043
033 070
031 033 034

013 042 047
082 112 131
101

APPENDIX

034
016
125
AMPRO
072
ANAM
031
AUDIO DYNAMICS 012
BROKSONIC
035
CANON
028
CAPEHART
108
CRAIG
003
CURTIS MATHES 031
DAEWOO
005
065
112
DAYTRON
108
DBX
012
DYNATECH
034
ELECTROHOME 059
EMERSON
006
029
036
129
FISHER
003
FUNAI
034
GE
031
107
GO VIDEO
132
HARMAN KARDON
HITACHI
004
043
INSTANTREPLAY 031
JCL
031
JCPENNY
012
040
JENSEN
043
JVC
012
048
130
KENWOOD
014
047
LG (GOLDSTAR) 001
101
LLOYD
034
LXI
003
017
MAGIN
040

Brand

034 046
013
033
054
034
048
072

017
034
131
039
056
080

024
040
043
101

85

APPENDIX
SET ID
Use this function to specify a TV ID number.

SETUP

1

VIDEO

Press the M E N U button and then use D or E or
or
button to select the OPTION menu.

AUDIO
TIME

Aspect Ratio
Caption/Text
Caption Options
Language

OPTION
SCREEN

ISM Method
Low Power

LOCK

2

Press the G or
button and then use
or
button to select Set ID.

D

Set ID

or E or

1

3

Press the G or
button and then use D or E or
or
button to adjust Set ID to choose the
desired TV ID number. The adjustment range of Set ID
is 1~99.

SETUP
VIDEO
AUDIO
TIME
OPTION

4
APPENDIX

86

Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous
menu.

SCREEN
LOCK

Aspect Ratio
Caption/Text
Caption Options
Language
ISM Method
Low Power
Set ID

G

1

2

3

IR CODES
(Hexa)

Code

Function

Note

0F

TV INPUT

Remote control Button (Some models) D6

0B

INPUT

Remote control Button

08

POWER

Remote control Button (Power On/Off)

98

MULTI

Remote control Button (Some models)

79

RATIO

Remote control Button

0E

TIMER

Remote control Button

10-19

Number Key 0-9

Remote control Button

4C

- (Dash)

Remote control Button

1A

FLASH BACK

Remote control Button

09

MUTE

Remote control Button

02

VOL +

Remote control Button

03

VOL -

Remote control Button

00

CH + ,

Remote control Button

01

CH - ,

Remote control Button

39

CC

Remote control Button

40

D ,

Remote control Button

41

E

,

Remote control Button

07

F ,

Remote control Button

06

G ,

Remote control Button

Code

(Hexa)

C4

POWER ON

C5

POWER OFF

5A
D0

COMPONENT

D5

RGB-PC

CE
CC

77

Ratio 16:9

EXIT, RETURN

Remote control Button

0A

SAP

Remote control Button

PIP CH +

Remote control Button

61

PIP INPUT

Remote control Button

63

SWAP, PIP SWAP

Remote control Button

Discrete IR Code
Discrete IR Code
Discrete IR Code
(Only 16:9 Mode)

Ratio Zoom

Discrete IR Code
(Only Zoom1 Mode)

APPENDIX

71

Discrete IR Code

(Only 4:3 Mode)

5B

Remote control Button

HDMI2
Ratio 4:3

Remote control Button (Some models) AF

PIP CH -

HDMI1/DVI

76

EZ PIC

72

Discrete IR Code

(HDMI2 Input Selection)

4D

Remote control Button

Discrete IR Code

(HDMI1/DVI Input Selection)

Remote control Button (Some models)

Remote control Button

Discrete IR Code

(RGB-PC Input Selection)

EZ SOUND

INFO

Discrete IR Code

(Component Input Selection)

52

PIP

AV2

BF

Remote control Button

60

AV1

(AV2 Input Selection)

Remote control Button

AA

Discrete IR Code

(AV1 Input Selection)

ENTER

Remote control Button (Some models)

Discrete IR Code

(Only Power Off)

MENU

E0

Discrete IR Code

(Only Power On)

43

Remote control Button (Some models)

TV

Note

(TV Input Selection)

44

E1

Function

87



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 90
Page Mode                       : UseOutlines
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:1f13d798-53b2-4964-bb43-57e8d0534d33
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Modify Date                     : 2009:03:20 08:20:04-05:00
Create Date                     : 2007:06:12 14:31:06Z
Creator Tool                    : 3.3: LaserWriter 8 Z1-8.7.1
Metadata Date                   : 2009:03:20 08:20:04-05:00
Document ID                     : uuid:aa92431e-c253-4fac-9706-fc0ea4c48b1a
Instance ID                     : uuid:6fd16e4d-2ce6-4e18-ae71-e389885a5042
Format                          : application/pdf
Title                           : SAC30708006-1
Creator                         : PSY
Author                          : PSY

EXIF Metadata provided by EXIF.tools