Lierda Science and Technology Group LSD3WF-2011X WiFi Module User Manual
Lierda Science & Technology Group Co.,Ltd WiFi Module Users Manual
Users Manual
LSD3WF-2011X Wi-Fi Module Product Specification Name: Wi-Fi Module Model: LSD3WF-2011X Revision : v1.1 Index 1. Functional characteristics.......................................................................................................... 3 2. Specifications ............................................................................................................................ 4 3. Hardware layout and interface description ............................................................................... 5 FCC Caution: Any Changes or modifications not expressly approved by the responsible party could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. To satisfy FCC RF Exposure requirements for this transmission devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. If used in portable product to do SAR evaluation and testing. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2.This device must accept any interference received, including interference that may cause undesired operation. OEM Labeling Requirements: NOTICE: The OEM or final integrator must ensure that FCC labeling requirements are met. This includes an additional label on the outside of the final product housing with the following contents: Company Name MODEL: Contains Model: LSD3WF-2011X, FCC ID:N8NLSD3WF-2011X This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. Functional characteristics LSD3WF-2011X is high performance and cost effective 802.11b/g/n WLAN USB module. LSD3WF-2011X is embedded with Ralink RT5370 a highly integrated MAC/BBP and 2.4GHz RF single chip with 150Mbps PHY rate supporting. It fully complies with IEEE 802.11n draft 3.0 and IEEE 802.11b/g feature rich wireless connectivity at high standards, cost-effective, throughput from extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. LSD3WF-2011X is designed to support standard based features in the areas of security, quality of service and international regulation, giving end users the greatest performance anytime in any circumstance. Feature: ● Host Interface USB2.0; ● 1T1R with up to 150Mbps PHY Data Rate for Both TX and RX ● 2.54mm pitch 4P pin package ● Dimension:40±0.2(L)×20±0.2(W)×4(H) mm ● 20MHz/40MHz Bandwidth Support ● Legacy and High Throughput Modes ● Variety of structures 2.4GHz 50 ω antenna, antenna interface IPX2 ● With Smaller Size Suitable for Compact System Integration ● Low Power Consumption, Extend the Battery Life ● WEP 64/128, WPA, WPA2, TKIP, AES ● QoS --- WMM, WMM-PS ● WPS-PIN, PBC ● Multiple BSSID Support ● Cisco CCX Support ● Operating Systems Support: Windows XP 32/64, Linux and Macintosh ● RoHS Compliant Applications: ● Netbook/ Notebook ● Printer ● Digital Photo Frame/ Camera ● Personal Navigation Device 2. Specifications BLOCK DIAGRAM RF Characteristics(Condition:VCC=3.3V @ +25℃) Feature Description Standards Fully Compliant with IEEE 802.11 b/g/n Standard Frequency Band 2.4~2.4835GHz Channel 11 Frequency Stability < ±5ppm @ Room Temperature +25℃ Modulation OFDM/DBPSK/DQPSK/CCK PHY Data Rate Up to 150Mbps Channel Bandwidth 20MHz and 40MHz OFDM Output Power 15dBm (Typ.) @EVM<3%, all channel -37dBc(Typ)@11~22MHz CCK Spectral Mask @ Pout=18dBm -60dBc(Typ)@22~33MHz 2f Harmonics -55dBm(Typ) LO Leakage Peak Power -64dBm(Typ)@ Transmit State -71dBm(Typ)@54MHz OFDM Receive Sensitivity -85dBm(Typ)@11MHz CCK -90dBm(Typ)@1MHz CCK RF Port Impedance 50Ω±10% USB Differential Port Impedance 90Ω±10% Dimension 40±0.2(L)×20±0.2(W)×4(H) mm Absolute Maximum Ratings Parameter Name Operating Temperature Supply Voltage Range: USB VCC Storage Temperature Range Min. -10 4.5 Typ. 5.0 -55 Max. 70 5.5 Unit ℃ 150 ℃ 3.Hardware layout and interface description PACKAGE INFORMATION Pin Description: NO. Name Description Nnte 1 5V 5V DC Power Supply Input for Module Circuits D- D- Line of USB2.0 D+ D+ Line of USB2.0 GND Revision 1.00(Draft) v1.1 Ground Description Draft Revision Add Mechanical Side View Date 2012-03-13 2012-07-03
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2014:05:12 17:56:26+08:00 Create Date : 2014:05:12 17:56:26+08:00 Format : application/pdf Title : Microsoft Word - LSD3WF-2011X Wi-Fi Module Product Specification.docx Creator : carol Document ID : uuid:ba0d4f85-7bb8-49f2-8c85-ff4595e47e59 Instance ID : uuid:9ead0d85-8bad-49fb-b24e-d573611cbef0 Page Count : 6 Author : carolEXIF Metadata provided by EXIF.tools