Life360 080715 Jiobit Smart Tag Location Tracker User Manual
Jio, Inc. Jiobit Smart Tag Location Tracker
Life360 >
User Manual
Attach your Jiobit
HOW TO
INDEX 02
03
09
13
17
19
21
Choose the Best Fit · · · ·
Built In Loop · · · · · · · · · ·
Universal Clip · · · · · · · · ·
Secure Loop · · · · · · · · · · ·
Strap Clip · · · · · · · · · · · · ·
Outer Sleeve · · · · · · · · · ·
Appendix · · · · · · · · · · · · ·
Choose the best
fit for your child
Every child will have a preferred way to
wear Jiobit. That’s why we’ve designed
multiple attachments to accommodate as
many wearing options as possible.
See our recommendations here or visit
http://jiob.it/HowToAttach for a video
demonstration.
GET TO KNOW YOUR JIOBIT
ADDITIONAL ATTACHMENTS
Sold separately
Universal Clip
Jiobit Device
w/ Built In Loop Secure Loop
Strap Clip Outer Sleeve
2
Built In Loop
Best for shoelaces,
drawstrings, and kept
in a pocket.
WEARABILITY
Shoelace Drawstring In Pocket
4
We are using shoelaces as an example, but
this loop also works with drawstrings.
HOW TO ATTACH
Tie laces normally.Thread the lace through the loop. Pull laces around Jiobit
to secure down.
2 31
65
In Socks
Tuck Jiobit into a tight
tting sock.
We understand that kids can be picky about
what they wear. If the wearing options we’ve
suggested are not available to you, let us help
you get creative with the built in loop.
ALTERNATIVE ATTACHMENTS
Hair Ties
Hair ties work well to attach
Jiobit to any kind of loop.
Safety Pins
Use a large safety pin to attach
to just about anything.
87
Universal Clip
Best for waistbands,
pockets, sleeves, and
necklines.
Waistband Neckline Pocket
WEARABILITY
10
Line up the prongs of the
clip with the loop holes on
each side of Jiobit.
Hold Jiobit in one hand. With the other hand, twist
and pull up on the clip at the
same time to remove.
HOW TO REMOVEHOW TO ATTACH
Push down hard to snap it in.
1 2 1 2
1211
Secure Loop
Best for belt loops, tag
loops, and buttonholes.
Belt Loop Tag Loop Buttonhole
WEARABILITY
14
Line up the prongs of the
loop with the loop holes on
each side of Jiobit.
With the other hand, twist
and pull up on the clip at
the same time to remove.
Hold Jiobit in one hand.Push down hard to snap it in.
HOW TO REMOVEHOW TO ATTACH
1 2 1 2
1615
The strap clip is sold separately.
Visit www.jiobit.com to purchase.
Shoe Strap Backpack Strap Belt
Sold separately
Strap Clip
Best for backpack straps,
belts, and shoe straps.
WEARABILITY
18
The sleeve is sold separately.
Visit www.jiobit.com to purchase.
ATTACHING THE SLEEVE TO JIOBIT
Insert Jiobit top rst into the sleeve as shown. Pull the
bottom of the sleeve over the bottom of Jiobit.
Outer Sleeve
To protect or personalize
your Jiobit.
Sold separately
20
REGULATORY & SAFETY NOTICES
Model Name & Number: Jiobit 4188N8762W
USA: Federal Communications Commission (FCC) statement
This device complies with FCC part 15 FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation FCC warning.
Changes or modications not approved by JIO, Inc. could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
Appendix
Visit jiobit.com to see Jio’s Warranty & Return Policy,
Privacy Policy, Terms of Use, and Terms of Service.
©2017 Jio Inc. All Rights Reserved
22
Canada: Industry Canada (IC) statement
This device meets the IC requirements for RF exposure in public or
uncontrolled environments. IC Notice to Users in accordance with RSS
GEN Issue 3:
This device complies with Industry Canada license exempt RSS
standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
1. l’appareil ne doit pas produire de brouillage;
2. l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
IC ID: 22220-080715
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
· IC Notice to Users in accordance with RSS GEN Issue 3: 21. This
device complies with Industry Canada license exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. this device must
accept any interference, including interference that may cause
undesired operation of the device IC ID: 8542A-FB404
This device meets the FCC requirements for RF exposure in public or
uncontrolled environments.
FCC ID: 2AKLI-080715
2423
Visit Jiobit member care
SUPPORT.JIOBIT.COM
Give us a call
855-546-2848
Send us an email
SUPPORT@JIOBIT.COM
QUESTIONS?