Life360 080715 Jiobit Smart Tag Location Tracker User Manual
Jio, Inc. Jiobit Smart Tag Location Tracker
  
    Life360   >  
User Manual
HOW TO Attach your Jiobit INDEX Choose the Best Fit · · · · 02 Built In Loop · · · · · · · · · · 03 Universal Clip · · · · · · · · · 09 Secure Loop · · · · · · · · · · · 13 Strap Clip · · · · · · · · · · · · · 17 Outer Sleeve · · · · · · · · · · 19 Appendix · · · · · · · · · · · · · 21 GET TO KNOW YOUR JIOBIT Jiobit Device w/ Built In Loop Universal Clip Choose the best fit for your child Secure Loop ADDITIONAL ATTACHMENTS Sold separately Strap Clip Outer Sleeve Every child will have a preferred way to wear Jiobit. That’s why we’ve designed multiple attachments to accommodate as many wearing options as possible. See our recommendations here or visit http://jiob.it/HowToAttach for a video demonstration. Built In Loop WEARABILITY Best for shoelaces, drawstrings, and kept in a pocket. Shoelace Drawstring In Pocket HOW TO ATTACH We are using shoelaces as an example, but this loop also works with drawstrings. Thread the lace through the loop. Tie laces normally. Pull laces around Jiobit to secure down. ALTERNATIVE ATTACHMENTS We understand that kids can be picky about what they wear. If the wearing options we’ve suggested are not available to you, let us help you get creative with the built in loop. Hair Ties Hair ties work well to attach Jiobit to any kind of loop. In Socks Tuck Jiobit into a tight fitting sock. Safety Pins Use a large safety pin to attach to just about anything. Universal Clip WEARABILITY Best for waistbands, pockets, sleeves, and necklines. Waistband Neckline Pocket 10 HOW TO ATTACH Line up the prongs of the clip with the loop holes on each side of Jiobit. 11 Push down hard to snap it in. HOW TO REMOVE Hold Jiobit in one hand. With the other hand, twist and pull up on the clip at the same time to remove. 12 Secure Loop WEARABILITY Best for belt loops, tag loops, and buttonholes. Belt Loop Tag Loop Buttonhole 14 HOW TO ATTACH Line up the prongs of the loop with the loop holes on each side of Jiobit. 15 Push down hard to snap it in. HOW TO REMOVE Hold Jiobit in one hand. With the other hand, twist and pull up on the clip at the same time to remove. 16 Strap Clip WEARABILITY Best for backpack straps, belts, and shoe straps. Shoe Strap Sold separately Backpack Strap Belt The strap clip is sold separately. Visit www.jiobit.com to purchase. 18 Outer Sleeve ATTACHING THE SLEEVE TO JIOBIT Insert Jiobit top first into the sleeve as shown. Pull the bottom of the sleeve over the bottom of Jiobit. To protect or personalize your Jiobit. Sold separately The sleeve is sold separately. Visit www.jiobit.com to purchase. 20 Appendix REGULATORY & SAFETY NOTICES Model Name & Number: Jiobit 4188N8762W USA: Federal Communications Commission (FCC) statement This device complies with FCC part 15 FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation FCC warning. Changes or modifications not approved by JIO, Inc. could void the user’s authority to operate the equipment. Visit jiobit.com to see Jio’s Warranty & Return Policy, Privacy Policy, Terms of Use, and Terms of Service. © 2017 Jio Inc. All Rights Reserved Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 22 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Canada: Industry Canada (IC) statement · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/T V technician for help. · IC Notice to Users in accordance with RSS GEN Issue 3: 21. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device IC ID: 8542A-FB404 This device meets the FCC requirements for RF exposure in public or uncontrolled environments. FCC ID: 2AKLI-080715 23 This device meets the IC requirements for RF exposure in public or uncontrolled environments. IC Notice to Users in accordance with RSS GEN Issue 3: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. l’appareil ne doit pas produire de brouillage; 2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IC ID: 22220-080715 24 QUESTIONS? Visit Jiobit member care SUPPORT.JIOBIT.COM Give us a call 855-546-2848 Send us an email SUPPORT@JIOBIT.COM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36 Create Date : 2017:11:05 08:56:13-08:00 Metadata Date : 2017:11:05 08:56:14-08:00 Modify Date : 2017:11:05 08:56:14-08:00 Creator Tool : Adobe InDesign CC 13.0 (Macintosh) Instance ID : uuid:153dfa35-5342-dc4a-8f18-1a1470d2daaa Original Document ID : xmp.did:d97a1a14-5c1e-4860-8817-09c388d41934 Document ID : xmp.id:da9d924b-db00-4529-a225-78df996ecea6 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:66930b2d-3877-406d-b1d7-e3c3ece6c0f8 Derived From Document ID : xmp.did:726b3476-c68a-4342-843c-f944c2a7531e Derived From Original Document ID: xmp.did:d97a1a14-5c1e-4860-8817-09c388d41934 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Macintosh) History Changed : / History When : 2017:11:05 08:56:13-08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 15 Creator : Adobe InDesign CC 13.0 (Macintosh)EXIF Metadata provided by EXIF.tools