Lifescan Onetouch Ultramini Blood Glucose Ling System Users Manual 33716 OTUMini APG 088861A E

bloodglucoselingsystem 8fe9a46e-7470-4720-8938-bb934c58fda8 Lifescan Blood Glucose Meter Blood Glucose ling System User Guide |

: Lifescan Lifescan-Onetouch-Ultramini-Blood-Glucose-ling-System-Users-Manual-571842 lifescan-onetouch-ultramini-blood-glucose-ling-system-users-manual-571842 lifescan pdf

Open the PDF directly: View PDF .
Page Count: 2

Blood

Glucose

Monitoring

System

IMPORTANT: Read detailed

instructions and other important

information in your owner’s booklet.

Insert a test strip into

the test port as shown. The

three contact bars should be

facing you. The meter will turn

on and display the code from

your last test. If you are using

the meter for the first time,

a constant Cand a flashing

“——” appears instead of a

code.

If the code on the meter does not match the code

on the test strip vial, press ▲or ▼to match the code

number on the test strip vial. The display will then advance

to the screen with the flashing blood drop icon .

If the flashing blood drop icon appears before you are

sure the codes match, remove the test strip and re-start

from step 1.

CAUTION: This step is essential to obtain accurate results.

WARNING: If mmol/L does not appear with the test result,

call the OneTouch®Customer Care Line at 1 800 663-5521.

1 2

Coding the meter

Hold the OneTouch®

Lancing Device cap firmly

against the side of your finger.

Press the release button.

Remove the OneTouch®Lancing

Device from your finger.

Gently squeeze and/or massage your fingertip

until a round drop of blood of at least one microlitre

( actual size) forms on your fingertip.

1 2

Getting a blood sample from your fingertip

When the flashing

blood drop icon

appears, touch and hold

the drop of blood to the

narrow channel in the

top edge of the test strip

until the confirmation

window is full.

If your sample does not fill the

confirmation window on the first try,

do not add more blood to that strip.

Instead, test again with a new strip.

After the meter counts

down from 5 to 1, your blood

glucose level appears on the

display along with the unit of

measure, and the date and

time of the test.

1 2

Applying the blood sample

Top edge

Narrow channel

Apply drop here

Abbreviated Procedure Guide

33716 OTUMini APG 088861A E 7/3/07 2:55 PM Page 1

The hour will now start flashing. Press and release ▲or ▼to

change the hour. Note that “AM” or “PM”

changes when you pass 12:00.

When the correct hour is on the display,

wait five seconds.

1

Firmly press and hold the lancing device against your forearm or palm for a few seconds.

Wait until the skin surface under the AST™Clear Cap changes color (as blood collects beneath

the skin). This tells you there is enough blood flow for a good sample. Then press the release

button while continuing to apply pressure. Keep holding the lancing device against your skin

until a round drop of blood forms under the cap.

When sampling blood from your forearm or palm, make sure the drop of blood is of at least one

microlitre ( actual size) before you release pressure and remove the lancing device.

3

Choose your sample site.

Forearm

Choose a fleshy area of the forearm away

from bone, visible veins and hair.

Palm

Choose a fleshy area on the palm below the

thumb or pinky finger. Select a spot with no

visible veins and away from deep lines.

2

Replace the blue

cap with the

AST™Clear Cap.

1

Getting a blood sample from your forearm or palm

The OneTouch®UltraMini™Meter allows you to sample blood from your forearm or palm as well as your fingertip. Before using your forearm or palm

for sampling, please speak to your healthcare professional and refer to the owner’s booklet for complete instructions.

Forearm Palm

Forearm Palm

Abbreviated Procedure Guide

With the meter off, press and

release ▼to turn it on. Your most

recent test result will appear on

the display.

Press ▼to move to the previous result stored

in the meter. Then, press ▲or ▼to move

forward or backward through all of your

results. When you’re finished, press and

hold ▼for two seconds until the meter turns off.

Reviewing past results

The minutes will now start flashing.

Press ▲or ▼to change the minutes, then

wait five seconds.

2

Setting the time and date

The meter stores a maximum of 50 blood glucose test results. You can review the results stored in the meter memory, starting with the most recent.

Before using your meter for the first time, you should check and update

these settings. Start with the meter off, then press and hold ▼for five

seconds until the start-up test screen

appears. After the test screen, the pre-set

time and date will appear on the display

for five seconds.

Note: If a setting does not need to be updated, simply wait five seconds.

The meter display will automatically advance to the next setting.

Check AM/PM. If not correct, continue to press ▲or ▼until

the hour and “AM” or “PM” are correct.

The year will now flash. Press ▲or ▼

to change the year. When the correct year is

on the display, wait five seconds.

3

With the month flashing on the

display, press ▲or ▼to change the month,

then wait five seconds.

4

The day will now flash. Press ▲or ▼

to change the day, then wait five seconds.

Your time and date settings will appear on

the display for five seconds. Your settings

will be saved and the meter will then turn off.

5

Need help?

Call the OneTouch®Customer Care Line

1 800 663-5521

or

Visit us at www.OneTouch.ca

Trademarks owned by Johnson & Johnson and used under license. Rev. 2007/03

©2007 LifeScan Canada Ltd., Burnaby, B.C., V5C 6C6 AW 088861A

33716 OTUMini APG 088861A E 7/3/07 2:56 PM Page 2