Liftup A S MODULE1 Module for lift operations User Manual User man

Download:
Mirror Download [FCC.gov]
Document ID	4009335
Application ID	450b8x2MwAmYcY3bpvgBdA==
Document Description	User man
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.32kB (604018 bits)
Date Submitted	2018-09-18 00:00:00
Date Available	2018-09-18 00:00:00
Creation Date	2018-09-06 13:11:42
Producing Software	Microsoft® Word til Office 365
Document Lastmod	2018-09-06 13:55:06
Document Title	USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
Document Creator	Microsoft® Word til Office 365
Document Author:	Jannie Jørgensen

User Installation Manual
MODULE1
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
Contents
1.
Foreword................................................................................................................................................... 3
2.
Declaration ............................................................................................................................................... 4
2.1 Regulatory Approvals ........................................................................................................................ 8
2.2 EU Declaration of conformity......................................................................................................... 9
3.
Technical specifications ........................................................................................................................10
3.1 MODULE1 Remote control ..........................................................................................................10
4.
Installation of MODULE1 in Liftup products .................................................................................11
4.1 Pairing of remote control ..............................................................................................................12
5.
Disposal ...................................................................................................................................................12
6.
Right of warranty...................................................................................................................................12
7.
Approvals and certificates ...................................................................................................................13
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
1. Foreword
The MODULE1 is a generic radio receiver module for integration into various Litup products.
The MODULE1 provides access to remote operation of the end products after installation. The
installation of MODULE1 will per default be a factory installation. Post installation at the
customer performed by Liftup product service is not an option due to regulatory rules.
It is important to read this manual before using the “MODULE1”.
This is an original user and installation manual for
the “MODULE1”.
Usage:
The MODULE1 is intended for integration into
Liftup products, e.g. FlexStep V2. After integration
the FlexStep V2 can be operated by a Liftup
remote control.
The lift, e.g. FlexStep V2 or other Liftup lifts, is a
so-called “dead man operated” lift, i.e. the buttons
of the associated remote control must be pressed
and held during the entire motion. Also called
“Hold to run operated”. This feature is
implemented for safety reasons.
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
2. Declaration
Corporate Office:
Liftup Inc.
4809 Ehrlich Road
Suite 105
FL – 33624, Tampa
Phone: +1 844 543 8878
www.liftup.us
Manufacturer:
Liftup A/S
Hagensvej 21
DK–9530 Stoevring
Denmark
Phone: +45 9686 3020
www.liftup.dk
Copyright and Trademarks
© Liftup A/S. All rights reserved.
Liftup, the Liftup logo and Liftup are trademarks of Liftup A/S, registered in the United States
and in other countries. All other trademarks are the property of their respective owners.
Release Notice
This document is release 1.0 of the MODULE1 User Installation Manual.
End product statements
The final end product e.g. lift must provide the following claims in the user manual for the lift
according to the regulatory rules specified for EU, US, Canada and Australia:
The following Product Limited Warranty gives Resellers specific legal rights. You may have
others, which vary from state/jurisdiction to state/jurisdiction.
Product Limited Warranty
Subject to the terms and conditions set forth herein, Liftup A/S (“Liftup”) makes the following
warranty only to its Resellers who purchase the MODULE1 hardware product (“Product”)
directly from Liftup: for a period of one (1) year from the date of shipment from Liftup, the
Product will substantially conform to Liftup’s standard published specifications for the Product
and the Product hardware will be substantially free from defects in materials and workmanship.
The foregoing warranty shall not apply to embedded software/firmware components.
THIS PRODUCT LIMITED WARRANTY IS PROVIDED TO RESELLERS AND TO RESELLERS
ONLY. RESELLER IS SOLELY RESPONSIBLE FOR ANY AND ALL WARRANTIES MADE TO
ITS CUSTOMERS, AND LIFTUP MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND
SHALL HAVE NO OBLIGATIONS OR LIABILITY TO RESELLER’S CUSTOMERS OR ENDUSERS OF THE PRODUCT. RESELLER SHALL NOT MAKE ANY REPRESENTATIONS OR
WARRANTIES ON LIFTUP’S BEHALF, AND SHALL FULLY INDEMNIFY, DEFEND AND
HOLD LIFTUP HARMLESS FROM ANY BREACH OF THE FOREGOING. IF RESELLER
DISTRIBUTES PRODUCT TO END-USER CUSTOMERS, RESELLER SHALL BE SOLELY
RESPONSIBLE FOR PREPARING AND PROVIDING PRODUCT WARRANTIES AND
PRODUCT LITERATURE TO END-USERS.
Warranty Remedies
If the Product fails during the warranty period for reasons covered by this Product Limited
Warranty and Reseller notifies Liftup of such failure during the warranty period, Liftup at its
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
option will repair OR replace the nonconforming Product, OR refund the purchase price paid
by Reseller for the Product, provided that Reseller returns the Product to Liftup in accordance
with Liftup’s standard return material authorization procedures or as otherwise instructed by
Liftup.
Warranty Exclusions and Disclaimers
The foregoing Product Limited Warranty shall only apply in the event and to the extent that (i)
the Product is properly and correctly installed, configured, interfaced, maintained, stored and
operated in accordance with Liftup’s specifications, and (ii) the Product is not modified or
misused. This Product Limited Warranty shall not apply to, and Liftup shall not be responsible
for, defects or performance problems resulting from: (a) the combination or utilization of the
Product with hardware or software products, information, data, systems, interfaces, services or
devices not made, supplied or specified by Liftup; (b) the operation of the Product under any
specifications other than, or in addition to, Liftup’s standard published specifications for the
Product; (c) the unauthorized installation, modification or use of the Product; (d) damage caused
by: accident, lightning or other electrical discharge, water immersion or spray, or exposure to
environmental conditions for which the Product is not intended; or (e) normal wear and tear
on consumable parts, including by way of example and without limitation, batteries.
LIFTUP DOES NOT WARRANT OR GUARANTEE THE RESULTS OBTAINED THROUGH
THE USE OF THE PRODUCT. THE FOREGOING TERMS OF THE PRODUCT LIMITED
WARRANTY STATE LIFTUP’S ENTIRE LIABILITY, AND RESELLER’S EXCLUSIVE REMEDIES,
RELATING TO THE USE AND PERFORMANCE OF THE PRODUCT EXCEPT AS
OTHERWISE EXPRESSLY PROVIDED FOR IN THIS PRODUCT LIMITED WARRANTY, THE
PRODUCT, ACCOMPANYING DOCUMENTATION AND MATERIALS, AND/OR ANY
EMBEDDED SOFTWARE/FIRMWARE AND UPDATES THERETO ARE PROVIDED “AS-IS”
AND WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND, BY EITHER LIFTUP
OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION, PRODUCTION,
INSTALLATION OR DISTRIBUTION, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
TITLE AND NONINFRINGEMENT. THE STATED EXPRESS WARRANTIES ARE IN LIEU OF
ALL OBLIGATIONS OR LIABILITIES ON THE PART OF LIFTUP ARISING OUT OF, OR IN
CONNECTION WITH, THE PRODUCT. WITHOUT LIMITING THE GENERALITY OF THE
FOREGOING:
THE PRODUCT MAY CONTAIN TECHNOLOGY THAT IS NOT FAULT TOLERANT AND
IS NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE IN ENVIRONMENTS OR
APPLICATIONS IN WHICH THE FAILURE OF THE PRODUCT WOULD LEAD TO DEATH,
PERSONAL INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE OR SEVERE
FINANCIAL LOSS. ANY USE OR DISTRIBUTION BY RESELLER OR ITS CUSTOMERS IN
CONNECTION WITH ANY SUCH ENVIRONMENT OR APPLICATION SHALL BE AT
RESELLER’S AND ITS CUSTOMERS’ SOLE RISK, AND LIFTUP SHALL HAVE NO LIABILITY
WHATSOEVER IN CONNECTION THEREWITH. RESELLER SHALL INDEMNIFY AND
HOLD LIFTUP AND ITS SUPPLIERS HARMLESS FROM ANY CLAIM BROUGHT AGAINST
LIFTUP WHICH ARISES FROM RESELLER’S USE OR DISTRIBUTION OF THE PRODUCT IN
CONNECTION WITH SUCH ENVIVRONMENTS OR APPLICATIONS. SOME STATES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
OF AN IMPLIED WARRANTY, SO CERTAIN OF THE ABOVE LIMITATIONS MAY NOT
APPLY TO EVERY RESELLER.
Embedded Software/Firmware
The Product and associated tools, if any, may contain embedded software/firmware, which is
licensed, not sold, and is only for use within the Product as an integral part thereof. Such
embedded software/firmware (which includes all updates thereto) contains valuable trade
secrets and is proprietary to Liftup and its suppliers. To the greatest extent permitted by law,
such embedded software/firmware may not be modified, copied, disassembled, decompiled or
reverse engineered. Liftup reserves all other rights.
Limitation of Liability
LIFTUP’S ENTIRE LIABILITY REGARDING THE PRODUCT SHALL BE LIMITED TO THE
AMOUNT ACTUALLY PAID BY RESELLER FOR THE PRODUCT. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL LIFTUP OR ITS
SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY
RELATING IN ANY WAY TO THE PRODUCTS, ACCOMPANYING DOCUMENTATION
AND MATERIALS, AND ANY EMBEDDED SOFTWARE/FIRMWARE AND UPDATES
THERETO (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
PROFITS,
BUSINESS INTERRUPTION, LOSS OF DATA OR ANY OTHER PECUNIARY LOSS),
REGARDLESS OF WHETHER LIFTUP HAS BEEN ADVISED OF THE POSSIBILITY OF ANY
SUCH LOSS AND REGARDLESS OF THE COURSE OF DEALING BETWEEN LIFTUP AND
RESELLER. BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO EVERY RESELLER.
Notices
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This device and its
antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
15.105 Information to the user
Class B Statement – Notice to Users. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under Federal Communications
Commission rules.
FCC/IC
The MODULE1 product complies with the FCC Part 15.249 and the Industry Canada requirements RSS-GEN, RSS-210.
The MODULE1 product complies with Part 15 of the FCC rules and with Industry Canada
license exempt standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
The MODULE1 product is SAR test excluded according to FCC KDB 447498, RSS102 and EN
62479 at separation distances larger than 5 mm and less than 50 mm.
With respect to radiofrequency radiation exposure Information, it is declared; that this module
complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
gives an extra margin, since the remote control normally, only is used in “controlled
environment” for approx. 30 seconds when lifting, and typically only a few times a day.
The firmware setting is not accessible by the end user.
The final end product must be labelled in a visible area with the following:
“
This devise contains:
FCC ID: 2AK8H-MODULE1
IC: 22516-MODULE1
”
ACMA (AUS/NZ)
The MODULE1 product complies with the Australian/New Zealand Radiocommunications Act
1992 for operation in the band 2400-2483 MHz by the RCM mark.
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
2.1
Regulatory Approvals
CE
The MODULE1 product comply with the essential requirements of the RED Directive
2014/53/EU as stated by the EU Declaration of Conformity (CE). The MODULE1 product
comply with the European Telecommunications Standards Institute Specifications EN 300 440
operating in 2.400 GHz to 2.483 GHz band for Radio Equipment and Systems.
EU/International
The MODULE1 product comply with the essential requirements of the RED Directive
2014/53/EU as stated by the EU Declaration of Conformity (CE). The MODULE1 product
comply with the European Telecommunications Standards Institute Specifications EN 300 440
operating in the 2.400 GHz to 2.483 GHz band for Radio Equipment and Systems
The MODULE1 complies with the essential requirements of the 2011/65/EU directive on the
restriction of the use of certain hazardous substances in electrical and electronic equipment
(ROHS 2).
Complies with the essential requirements of the EU 1907/2006 regulation concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
Complies with the requirements of the 2012/19/EU directive on waste electrical and electronic
equipment and directive 2006/66/EC on batteries and accumulators and waste batteries and
accumulators (WEEE).
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
2.2
EU Declaration of conformity
Manufacturer:
Address:
Hereby declares that
Liftup A/S
Hagensvej 21, DK-9530 Støvring, Tel. +45 9686 3020
MODULE1 for integration into other Liftup equipment is in compliance with:
_____________________________________________________________________________________
ROHS-Directive:
RED
FCC (USA)
ISED (Industry Canada)
2011/65/EU. substances in electronic equipment
2014/53/EU, Radio Equipment Directive
CFR 47 Part 15
FCC ID: 2AK8H-MODULE1
RSS-210
IC: 22516-MODULE1
_____________________________________________________________________________________
MODULE1 meets the relevant requirements notably in following standards:
EN 62479:2010
EN 300 440, v2.1.1
Draft EN 301489-1, v2.2.0
Draft EN 301489-17, v3.2.0
AS/NZS 4268
AS/NZS 2772.2
Human exposure
Electromagnetic compatibility + Radio spectrum Matters
Electromagnetic compatibility + Radio spectrum Matters
Electromagnetic compatibility + Radio spectrum Matters
Radio Equipment and Systems – Short Range devices
Radio Frequency Fields (mean power < 1 mW)
Testing and conformity assessment performed by Jens-EMC and Liftup A/S
_____________________________________________________________________________________
The above products are manufactured under the following management system:
EN ISO 9001: 2008
Director
Title
Quality management, Certificate No. 44 100 117583
Søren Elisiussen
Name
Liftup A/S, Hagensvej 21, DK-9530 Støvring
Company
2018-08-15
_____________________________
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
3. Technical specifications
3.1
MODULE1 Remote control
2,4GHz remote control:
Dimensions (L x W x H):
Weight:
Frequency’s:
Duty cycle
Power:
Supply:
Water and dust:
Working temperature:
Storage temperature:
Expected operational life:
Short Range devices. Receiver Class 3
72 x 33 x 10mm / 2,83 x 1,30 x 0,40 in.
10 g (0,035 lbs.)
2,410GHz 2,435GHz and 2,460GHz
< 1%
< 0,6mW
5,6Volt - 30mA
N/A
+5ºC to +40ºC / 41ºF to 104ºF
-25ºC to +70ºC / 13ºF to 158ºF
> 5 years
Right reserved to make technical modifications
US/EU/AUS Label
Label 18x26 mm
MODULE1- Label placed on the back
10
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
4. Installation of MODULE1 in Liftup products
For FlexStep V2
Parts: PCB 103736
The multi-cable
“MODULE1 Lid for Wall Profile RH, FS2”
1.
Pull the 6-pole multi-cable through the
Wall Profile RH, inside the back lane.
2.
Connect the multi-cable to the connection-board on the bottom rail.
3.
Connect the multi-cable to MODULE1
4.
Mount the “MODULE1” inside the “Lid
for Wall Profile RH, FS2”
Insert the Module in the top of the
aluminium Wall Profile RH
11
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
5.
Tighten the top screw.
Colors and shapes may vary.
4.1
Pairing of remote control
Pairing of the associated remote control is normally done by the dealer or the factory. Consult
the end product user manual for detailed pairing instructions.
5. Disposal
In connection with disposing of the lift product, it is the duty of the owner to dispose of the
MODULE1 in accordance with the regulations applicable at the time.
When disposing of this device, ensure compliance with local ordinances and regulations.
Consider contacting your dealer for assistance with disposal.
6. Right of warranty
The right of warranty is subject to the General Conditions for Supply which are presented here:
https://www.liftup.dk/media/3179/general-conditions-for-supply_liftup-inc.pdf.
ATTENTION: If the prescribed service inspections are not maintained the right
of warranty may be lost.
Failing to perform these inspections can also have serious consequences for product safety. It
rests with the customer to ensure compliance with the prescribed service inspections at all
times. Cf. Danish Working Environment Authority Executive Order 1109 §14.
12
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
7. Approvals and certificates
The MODULE1 product is tested in compliance with the European radio and medical
specifications (CE - Declaration of Conformity) and certified according to the following radio
recommendations US and Canada:
MODULE1:
FCCID: 2AK8H MODULE1
IC: 22516-MODULE1
FCC and IC Statements
The MODULE1 product contains radio transmitters that comply with CFR 47 Part 15.249 of
the FCC rules and with RSS-GEN, RSS-102 and RSS-247 of Industry Canada requirements.
Notice statements according to CFR 47 Part 15.19 / RSS-GEN:
The MODULE1 product complies with Part 15 of the FCC rules and with Industry Canada
license exempt standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Déclarations selon le CFR 47 section 15.19 / RSS-GEN:
Le présent MODULE1 appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) L'appareil ne doit pas produire de brouillage, et
(2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
NOTICE statements according to CFR 47 Part 15.21:
Changes or modifications made to this equipment not expressly approved by Liftup A/S may
void the FCC authorization to operate this equipment.
Statements according to CFR 47 Part 2.1091/2.1093 and OET bulletin 65/RSS- 102:
The MODULE1 and REMOTE1 products are SAR test excluded according to FCC KDB 447498,
RSS102 and EN 62479 at separation distances larger than 5 mm and less than 50 mm with
respect to the human body as the maximal radiated power is below the limits.
The MODULE1 and REMOTE1 products are by declaration of RF Exposure Compliance for
Exemption from Routine Evaluation Limits according to RSS102.
13
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us
USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
ATTESTATION:
It is attested that the radio communication apparatus meets the exemption from the routine
evaluation limits in RSS102 Section 2.5 of this standard; that the Technical Brief was prepared
and the information contained therein is correct; that applicable measurement methods and
evaluation methodologies have been followed; and that the device meets the SAR and/or RF
field strength limits of RSS-102.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
SAR test exclusion according to EN 62479
The MODULE1 and REMOTE1 products are compliant according to EN 62479 as the output
power is less than 20 mW.
AUS/NZ:
•
The MODULE1 complies with the AS/NZS 4268 requirements for 2.4 GHz transceiver.
14
Liftup Inc. | 4809 Ehrlich Road | Suite 105 | FL – 33624, Tampa | T: +1 844 543 8878 | M: info@liftup.us | www.liftup.us

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : Jannie Jørgensen
Create Date                     : 2018:09:06 13:11:42+02:00
Modify Date                     : 2018:09:06 13:55:06+02:00
Language                        : da-DK
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Producer                        : Microsoft® Word til Office 365
Format                          : application/pdf
Title                           : USER INSTALLATION MANUAL – MODULE1 – US VERSION 1.0
Creator                         : Jannie Jørgensen
Creator Tool                    : Microsoft® Word til Office 365
Metadata Date                   : 2018:09:06 13:55:06+02:00
Document ID                     : uuid:1945EEDF-F916-4727-8E8B-D8DE951B3EBC
Instance ID                     : uuid:05c6f63c-0f87-4e30-938d-b1c403fec76f
Page Count                      : 14

EXIF Metadata provided by EXIF.tools