Lingan Intelligent Technology UCC1 Smart center User Manual
Shenzhen Lingan Intelligent Technology Co.,Ltd Smart center Users Manual
User Manual
Smart Center User Manual Dear customers, Thank you for choosing our company's product universal infrared remote control, which adopted today's emerging Wi-Fi and Zigbee Technology technology and refined sophisticated manufacturing processes, developed from research experiences integrated from many years. This product can support mobile app to perform local and remote control of household electronic Such as air conditioner, television, set top box, DVD stereo and Zigbee devices(such as door lock, curtain, lighting and etc)In order to give you a better experience of installation and usage ofthis product, please read this description carefully. I. Product Features 1. Support wireless network protocol Wi-Fi2.4GHz 802.11b/g; 2. SmartLink (demodulation drive) IGRS speedily OS APP Android APP (Scan QR code to download our APP) access network with 2 seconds; 3. Status indicator; 8. Can be laid flat, hang on a wall or magnetic to other places. 9. Self-organized network 10.Connect and control zigbee products II. Product Parameters Input voltage: DC 5V Input Current: 1A Infrared Frequency: 38 KHz Wireless Type: Wi-Fi2.4GHz 802.11 b/g Total power consumption: 1.2W Operating environment: Indoor Operating temperature: -20 -60 Operating humidity: 80% RH Zigbee parameter: Wireless RF mode frequency: 2445 Mhz Wireless communication protocol: IEEE802.15.4 Working channel: channel 01 III. Figure of the Product 4. Support all infrared device control; 5. Support remote/ other network; Product name Smart Center Model UCC1 6. Match the remote control automatically; 7. Have the function of learning infrared code; Indicator light Reset button IV. Reset Button Function and Indicator Light Status a. Restore Factory Defaults Long press reset button after access to power, until the indicator light turns to blue with quick flash which shows the restore successful. b. AP configuration mode When indicator light shows blue flashing, it means the devices is in AP configuration mode, and after 2-3 times slowly flash when the indicator is off, it means connection is successful. If the indicator light twinkles continuously, it s disconnected. c. Operation of APP control button has performed: red light flash. V. APP Operation Scan two-dimensional code in instructions and click the "Download" button when the " eFamily" app download page appears. After the download is complete, click "Install" to f-inish system installation automatically. After installation of this app, click "Experience Immediately" to enter the app, then click "Register" (Please read Terms of service before re-gistration) and click Next step after entering the cellphone number,afterwards input the verification code the cellphone received into the box and click "Next step " to set log in password, then click" Finish ". 1. When connect the power of smart center d evice, the blue light is flashing . 2. Enter the app, and click the top right corner + of home page, and then click quick configuration 3. Enter WiFi password (Note: please confirm the WiFi name is the same as the cellphoen connection) Note: Make sure the Wi-Fi name is the same as the cellphone connection. 4. Click Confirm 5. When the app displays 1 connected , it means that the configuration is successful, now the blue light stop flicking. 6. There are 2 icons show on the home page (one is gateway, the other one is IR remote), if this smart center connected to Zigbee devices, please click gateway icon into the co ntrolled page 7. 1.Click R remote Icon to enter homepa- 10. Take air conditioner as an example: following the operation the page jumps to the list of brand (default), there are 3 options and 4 ways in total on the bottom of this page: USB FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCâs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2AJK8-UCC1 10. Take air conditioner as an example: following the operation the page jumps to the list of brand (default), there are 3 options and 4 ways in total on the bottom of this page: First, the default mode. Click brand to enter all matching page directly, which will test the switching command of all the devices of this brand one by one till the device response. Click the Power button, there will popup a test dialog box: Last step -send the previous command; Send the code again ---- re-send the current command; No, next group ---- send the next command Yes, next step ---- click this button to go to next step when the current equipment has response. Second, the models match. Click the brand and each one will be l- abeled with its model type, in order to facilitate the equipment of known model to build new remote control (for example: if you know the air conditioner type is Gree YB-OF2, please select Gree quickly located in the right list, and click YB-OF2 to set new remote control.) Third, intelligent learn. Learning remote control code (required original remote), click intelligent learning to enter learning page. Click the key you want to learn, it will send learning code to the infrared device which will enter learning state. At this moment, you only need to align the remote control to the infrared device and long press the corresponding device key for 1 to 2 seconds. If the control le arned the command, there will pop-up a dialog box in which you can test the learned command. If the command is correct, click save to store the command. When all the keys you want to learn has complete, click Finish button on the right top corner to create new remote control. Note: 1. After create a new remote control successfully, in the home page, the main scene or the sub scene, click the corresponding remote co ntrol to control the device. Edit button on the top right corner is the learning control switch. When you select the learning mode, long press the button you want to learn to start learning. 2. Long press Remote Control button to m odify name and remove the remote control, the remote control in the main scene cannot be delete, and the remote control will appear on the homepage after delete in the sub scene. VI. Common Questions Q: What to do if the intelligent household electronic infrared Smart Center can't be connected? A: a. Check if the cellphone and the device are connecting to the same Wi-Fi. b. Click system set up authority management to check whether authorized. c. Reset the device. (Long press the reset button for 3 seconds to reset.) Q: What to do if the device can to be matched with the network? A: a. Check if the password entered by one key configuration is correct. b. Reset the device. (Long press the reset button for 3 seconds to reset.) Q: How to control Zigbee devices A: Please refer to Zigbee products Instructions VII. Instructions The one year warranty of our company s product only applies to the situation that all the operations comply with the instructions. The following situations are not covered by the warranty: 1. Any change, correction, abridged or illegible handwriting on the purchase tags or product instructions. 2. Malfunction caused by damage, incorrect connection or misusage. 3. Undesirable phenomena due to the extre- me environment rather than the inherent causes of this product (such as lightning, flood,fire, etc.) 4. This product has been opened or disassembled. 5. Badness caused by any usage, maintenance or custody not according to the product spe cifications (such as moisture, corrosion). 6. Product badness, appearance deformation, appearance damage or any other physical damage caused by external forces. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipm ent and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio /TV technician for help. ZigBee devices products Instructions After connecting Smart Center on the APP Home Page, it will appear 2 icons on the home page, one is bridge icon, another one is infrared device icon Click bridge1 icon, and pulling down the home page, will search out the Zigbee lamps, if having other Zigbee devices also can search out, which will be arranged in the behind the left side of type list. You can fix name or switch control the lamp, group control freely(grouping is that dragging the Zigbee devices icons into the scenes).And you also can control the lamps separately by clicking the single lamp. Click the light icon Click the upper left corner icon back to home page. Click the device icon directly can search other ZigBee devices, appears control interface, operate on the control interface.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : gzq Title : ÖÇ»ÛÖÐÐÄÓ¢ÎÄ£¨ÈÏÖ¤£© Create Date : 2016:09:19 11:42:39Z Creator Tool : CorelDRAW Version 9.397 Modify Date : 2016:10:14 16:30:36+08:00 Metadata Date : 2016:10:14 16:30:36+08:00 Producer : Corel PDF Engine Version 9.397 Document ID : uuid:b0f750de-c683-4f1e-bf28-9534c4d50c53 Instance ID : uuid:118b9c4a-7c7a-4791-9d01-e8d8efd02101 Page Count : 2 Author : gzqEXIF Metadata provided by EXIF.tools