Linksys Wet54G Quick Start Guide UK EU LA_V2 QIG Rev_NC

Wet54G-Eu V2 Qi,0 WET54G-EU_v2_qi,0 WET54G-EU_v2_qi,0 s s.linksys.com 3:

Wet54G-Eu V2 Qi WET54G-EU_v2_qi WET54G-EU_v2_qi 1224640138371 quickinstall s s.linksys.com 3:

: Linksys Linksys-Wet54G-Quick-Start-Guide linksys-wet54g-quick-start-guide linksys pdf

Open the PDF directly: View PDF .
Page Count: 8

A Division of Cisco Systems, Inc.

®

Model No.

Model No.

Wireless Quick Installation Guide

Wireless

1

Quick Installation Guide

Model No.

WET54G (UK/EU/LA) v2

Ethernet Bridge

Wireless-G

Package Contents

• Wireless-G Ethernet Bridge

•Setup CD-ROM

• User’s Guide on CD

• Quick Installation Guide

• Detachable Antenna

• RJ-45 Network Cable

• One Pair of Bridge Stands

• Power Adapter

GHz

2802.11g

4

,

2

1

AAttach the detachable

antenna.

BPlug the included Ethernet

network cable into the LAN port

on the back panel of the

Bridge.

CPlug the other end of the

Ethernet network cable into the

RJ-45 port of the hub, switch,

or PC you wish to use to

configure the Bridge.

DPlug the supplied power

adapter into the Power port on

the back panel of the Bridge.

Then plug the other end into

an electrical outlet.

B

D

Connect the Wireless-G Ethernet

Bridge for Setup

3

2

A

AInsert the Setup CD-ROM into

your PC’s CD-ROM drive. The

Setup Utility should run

automatically, and the

Welcome screen should

appear. If it does not appear,

click the Start button and

choose Run. In the field that

appears, enter D:\setup.exe (if

“D” is the letter of your CD-ROM

drive).

BClick Setup to begin the setup

process.

CMake sure the Bridge is

correctly connected to your

wired network. Click Next.

DThe screen displays a list of

Wireless-G Ethernet Bridges on

your network, along with their

status information. Select the

Bridge you are currently

installing by clicking its name in

the Selection box. Click Yes.C

D

Set up the Wireless-G

Ethernet Bridge

4

E

EA Password screen will appear.

In lowercase letters, enter

admin in the Password field.

Then click Enter.

FThe Mode Settings screen will

appear. Select Infrastructure if

you want your wireless

computers to communicate

with computers on your wired

network using a wireless access

point. Select Ad-Hoc if you

want wireless computers to

communicate directly with

each other.

In the WB Name field, enter a

unique name for the Bridge.

Click Next.

GOn the Wireless Settings

screen, enter your wireless

network’s SSID. If you chose Ad-

Hoc mode, select the channel

that your network uses.

If you have Wireless-G

(802.11g) and Wireless-B

(802.11b) devices in your

network, then keep the default

Network Mode setting, Mixed.

If you have only Wireless-G

devices, select G-Only. Then

click Next.

F

G

5

HThe IP Settings screen will

appear. If your network has a

DHCP server, select

Automatically obtain an IP

address (DHCP). Click Next

and proceed to step I.

If your network does not have a

DHCP server, select Set IP

configuration manually. Enter

an IP Address, IP Mask (also

known as Subnet Mask), and

Gateway.

You must specify an IP address.

If you are unsure about the IP

Mask and Gateway, leave

these two fields blank. Click

Next.

NOTE: The default IP address of

the Bridge is 192.168.1.226.

H

6

IOn the Security Settings

screen, set the level of

encryption you want for your

network, and select the

Passphrase(s) and/or

encryption keys.

With WPA PSK, or Pre-Shared

Keys, you have two encryption

options, TKIP and AES, with

dynamic encryption keys.

Select the type of algorithm,

TKIP or AES. Enter a WPA Shared

Key of 8-32 characters.

The WEP key can consist of the

letters “A” through “F” and the

numbers “0” through “9” and

should be 10 characters in

length for 64-bit encryption or

26 characters in length for 128-

bit encryption.

If you entered a Passphrase,

the WEP key will be generated

automatically.

Click the Next button to

continue.

I

7

JReview your settings on the

Confirmation screen. Write

down the Bridge’s IP Address if

you want to access the

Bridge’s Web-based Utility. Click

Yes to save these settings.

KOn the Congratulations

screen, click Exit.

K

J

8

4

NOTE: The Bridge features Power over

Ethernet (PoE) support. PoE technology

allows a PoE adapter (also known as a

power injector, power hub, or inline

power device) to supply data and power

to an Ethernet device using a single

Ethernet network cable. To use the

Bridge’s PoE feature, follow the instruc-

tions for your specific PoE device.

Connect the Wireless-G Ethernet

Bridge for Network Use

AAfter configuration, unplug the

power adapter from the

electrical outlet, and unplug

the Ethernet network cable

from the PC.

BPlug the Ethernet network

cable into the RJ-45 port on

the Ethernet-ready network

device you wish to add to the

wireless network.

CPlug the power adapter into a

local electrical outlet.

Congratulations! The installation of

the Wireless-G Ethernet Bridge

is complete.

3

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

and certain other countries. Copyright © 2004

Cisco Systems, Inc. All rights reserved.

WET54G-UK-EU-LA_V2-QIG-40219NC JL