Linno SSL3 Linno LYNC Sensor SSL User Manual Manual

Linno Inc. Linno LYNC Sensor SSL Manual

Manual

LINNO LAMPS MESH NETWORKING SMART DEVICE APP SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE REMOTE CONTROL SMART SENSOR MESH NETWORKING HOW IT WORKS
LINNO LAMPS MESH NETWORKING SMART DEVICE APP SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE REMOTE CONTROL SMART SENSOR MESH NETWORKING Group 1 Group 2 window WHAT SMART SENSOR SCEANARIO IS
LINNO LAMPS MESH NETWORKING SMART DEVICE APP SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE REMOTE CONTROL SMART SENSOR MESH NETWORKING window WHAT SMART SENSOR SCEANARIO IS
LINNO LAMPS MESH NETWORKING SMART DEVICE APP SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE REMOTE CONTROL SMART SENSOR MESH NETWORKING window WHAT SMART SENSOR SCEANARIO IS
LINNO LAMPS MESH NETWORKING SMART DEVICE APP SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE REMOTE CONTROL SMART SENSOR MESH NETWORKING brightness 70% brightness 70% window WHAT SMART SENSOR SCEANARIO IS
LINNO LAMPS MESH NETWORKING SMART DEVICE APP SENSING CALCULATION S/W CONTROLLER S/W & SERVER RECEIVE DATA & MONETIZE REMOTE CONTROL SMART SENSOR MESH NETWORKING brightness 10% brightness 50% window WHAT SMART SENSOR SCEANARIO IS
1 2 3 4 5 6 6 HIGH EFFICIENCY LIGHT FOR SPACE Space and light's efficiency
6 SECURITY MODE FOR USER Upgrade security
360 120 MOTOIN SENSOR LIGHT SENSOR LUX CONTROL MOOD LAMP SECURITY 3 PIR SENSOR For large Space 1 PIR SENSOR For Small Space .. !! ITEM : SMART SENSOR
Specifications1) Operating voltage: AC 110 V2) Communication Method: Wireless (Bluetooth) 3) Operating distance: 10 M4) Output: Max +10 dBm5) Receive sensitivity: -102 dBm typ.6) Operating frequencySend: 2.402 ~ 2.480 MHz, 2.4G ISM bandReception: 2.402 ~ 2.480 MHz, 2.4G ISM band7) Channel: 40 channels8) Modulation scheme: GFSK9) Channel spacing: 2 MHz10) Profile: Bluetooth Ver 4.011) Protocol: Asynchronous serial communication12) Size: 85 X 85 X 26 mm13) Weight: About : 150 g
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. • Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 Cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat.
CONTACT INFORMATION Manufacturer Address : 96-22, Yangji-ro 281beon-gil, Onam-eup, Namyangju-si, Gyeonggi-do, Korea To locate in-country Linno Inc., distributors of the SSL3 please refer to the Linno Inc. Website http://linno.co.kr/ These distributor(s) represent local contacts for this product. CORPORATE HEADQUARTERS: Linno Inc 96-22, Yangji-ro 281beon-gil, Onam-eup, Namyangju-si, Gyeonggi-do, Korea Tel: +82-2-546-9820 Fax: +82-2-546-9622 Web: http://linno.co.kr/ This device complies with Industry Canada license-exempt RSS standard(s). Operation is Subject to the following two condition: (1) this device may not cause interference ,and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu