Lionda Technology Co GH9742DLD03 2.4 GHz Digital Cordless Telephone User Manual manual 9742
Lionda Technology Co Ltd 2.4 GHz Digital Cordless Telephone manual 9742
Contents
- 1. users manual part 1
- 2. users manual part 2
users manual part 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 309895 |
| Application ID | PH+ClJe8DRgYUucMUnz7FA== |
| Document Description | users manual part 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 64.41kB (805148 bits) |
| Date Submitted | 2003-03-13 00:00:00 |
| Date Available | 2003-03-13 00:00:00 |
| Creation Date | 2003-01-11 19:24:45 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-01-14 10:27:44 |
| Document Title | manual 9742.qxd |
| Document Creator | ADOBEPS4.DRV Version 4.50 |
| Document Author: | sharon |
manual 9742.qxd 1/11/2003 11:25 AM Page 21 Caller ID System Operation Caller ID System This telephone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 50 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature. Viewing Caller Information During Incoming Calls 1. When there is an incoming call, the name and the telephone number of the caller will automatically appear after the first ring. If the name has more than 14 characters, the first 14 letters will be displayed first. Press the SHIFT LEFT button to view all the following letters. OR Caller’s telephone number will appear if the caller’s name is not available. OR “Unavailable” will appear when Caller ID information is not available. The origin of the call does not support the Caller ID system (including international calls). OR “Data error” will appear when the Caller ID information was received incorrectly or only part of the data was received. NOTE: When an error is received, none of the data from this call is saved in memory. OR “Private” will appear if the caller’s name and/or telephone number is blocked. OR “Msg waiting” will appear when a Voice Mail Message has been received and is stored by the Message Waiting service provided by the telephone company. NOTE: This functions is applicable to both HANDSET and BASE UNIT. 13 manual 9742.qxd 1/11/2003 11:25 AM Page 22 Caller ID System Operation Caller ID with Call Waiting When you subscribe to Call Waiting service from your local telephone company, this telephone will display a flashing name and number of the second caller while you are having a phone conversation with your first caller. When a new call comes in while you are talking, you will hear a notification beep from the HANDSET and the volume is momentarily muted. The new caller’s name and phone number, if available, appears on the LCD Screen. Second Caller First Caller 1. When you receive a “Call Waiting” call and you want to connect the call, press the button and start talking with the second caller. The active call will be placed on hold. FLASH/EDIT 2. Press the FLASH/EDIT 3. Press the TALK button to alternate between calls. button or place the HANDSET on the BASE UNIT to end the call. “MSG Waiting” (Message Waiting) The Message Waiting LED indicator will blink green when there is a message for you from your telephone company if you have subscribed to Voice Mail message service and if you have requested Visual Message Indication from your local telephone company. “Msg waiting” will appear on the LCD Screen in STANDBY mode. (To remove the MSG WAITING indicator, see page 26 for detail.) Note: This function requires voice mail subscription from the local telephone company. Furthermore, the local phone company must provide a type of voice mail signaling called “FSK” (Frequency Shift Key). Not all telephone companies have the visual message waiting feature available. Please contact your local telephone company to check if this is available in your area. Caller List This phone automatically stores the last 50 calls received. It records call information such as caller’s name and telephone number together with the date and time of the call. The NEW CALL LED indicator will blink red to indicate that you have a new Caller ID call stored in memory. Also, “New call:_ _” will be diplayed on the LCD Screen with “_ _” being the number of new calls that have not been reviewed. 14 manual 9742.qxd 1/11/2003 11:25 AM Page 23 Caller ID System Operation Viewing the Caller List 1. With the HANDSET or BASE UNIT in STANDBY mode, press the SCROLL UP or DOWN button. The LCD Screen will display “Incoming call,” press the SCROLL UP or DOWN button again to display the Caller ID records. 2. Any unviewed (new) calls will be displayed first. The information on the call will be displayed with the name, number, date, and time that the call was received. 3. Pressing the SCROLL DOWN button will go through the calls from the last call received to the first Caller ID record. Pressing the SCROLL UP button will allow you to view the calls from the first call received to the last. 4. If the name has more than 14 characters, the first 14 letters will be displayed first. Press the SHIFT LEFT button to view all the following letters. DIR/ 5. Press the ESC button on the HANDSET or DIR /HOLD button on the BASE UNIT to return to STANDBY mode. Placing a Call from the Caller List You can place a call from the Caller list by using the Caller ID CALLBACK feature. 1. When viewing the Caller ID List, press the SCROLL UP or DOWN button to find the record you wish to call back. 2. Press the /OPTION button to change the displayed number to 7, 10, or 11 digits. The first dialing option displayed is the 11 digits for a long distance call. First press. Press the # /OPTION button for the second time, the displayed number will change to 7 digits for a local call. Second press. # /OPTION button for the third time, the Press the displayed number will change to 10 digits for a local call with area code. Press the 3. Press the DIR/ ESC TALK Third press. button to cancel and return to STANDBY mode. button to dial the displayed number. 4. To end a call, either press the TALK button or place the HANDSET on the BASE UNIT. 15 manual 9742.qxd 1/11/2003 11:25 AM Page 24 Caller ID System Operation Storing Caller ID Records into the DIRECTORY (PHONE BOOK) 1. When viewing the Caller ID List, press the SCROLL UP or DOWN find the record you wish to store into the DIRECTORY (PHONE BOOK). 2. Press and hold the SAVE button to /RE/PA button. 3. The LCD Screen will display “Saved.” 4. If you wish to edit the newly stored number, edit it in the DIRECTORY (PHONE BOOK) (page 19, “Editing a Stored Number”). 5. Press the DIR/ ESC button to return to STANDBY mode. NOTE: You can store Caller ID Records into the DIRECTORY (PHONE BOOK) on the BASE UNIT by following the steps 1 to 3. Deleting Caller ID Records When viewing the Caller ID List you can delete a single call record or all of the call records. Deleting a Single Record 1. Press the SCROLL UP delete. 2. Press the or DOWN button. The LCD Screen will display “Erase item?” DEL/INT 3. To delete the record, press the the preceeding Caller ID record. 4. Press the DIR/ ESC button to find the record you wish to DEL/INT button again. The LCD Screen will display button to exit the Caller ID List. NOTE: This functions are applicable both HANDSET and BASE UNIT. Deleting All Records 1. Press the SCROLL UP 2. Press and hold the DEL/INT or DOWN button. button. The LCD Screen will prompt “Erase all?” 3. To delete all of the Caller ID records, press the Screen will return to STANDBY mode. DEL/INT NOTE: The user can cancel the deleting step by pressing the 16 DIR/ ESC button again. The LCD button. manual 9742.qxd 1/11/2003 11:25 AM Page 25 Caller ID System Operation Name and Telephone Number DIRECTORY (PHONE BOOK) This DIRECTORY (PHONE BOOK) lets you scroll through the list to find the person you need for one touch dialing. You can store up to 40 names and telephone numbers in the Memory. Viewing the DIRECTORY (PHONE BOOK) DIR/ 1. Press the ESC button. The LCD Screen will display “Phone book.” 2. Press the TELEPHONE KEYPAD ( 2 /ABC to 9 /WXY) button that corresponds to the first letter of a Caller’s name (a triple “beep” will sound if no entries are stored under those letters). Press the SCROLL UP or DOWN button to find the record you wish to view. 3. If the name has more than 14 characters, the first 14 letters will be displayed first. Press the SHIFT LEFT button to view all the following letters and/or . DIR/ 4. Press the ESC button to exit the DIRECTORY (PHONE BOOK). Storing Phone Numbers DIR/ 1. With the HANDSET in STANDBY mode, press the ESC button.The LCD Screen will display “Phone book.” FLASH/EDIT 2. Press the button to create a new DIRECTORY (PHONE BOOK) entry. 3. Enter the name you wish to store using the TELEPHONE KEYPAD 2 /ABC to 9 /WXY buttons to enter the name, (see page 18 for detail) you can store up to 18 letters. To move the cursor to the right, create a space or to enter a new letter, press the SHIFT RIGHT button. 4. Press the SCROLL DOWN button, and dial the telephone number you wish to store using the TELEPHONE KEYPAD 1 to 0 buttons. You can store up to 22 digits. Briefly press the SAVE /RE/PA button to insert a pause into the number. 5. Press and hold the SAVE /RE/PA button to store the number into memory. NOTES: 1. If there are no memory locations left in the speed dial DIRECTORY (PHONE BOOK) the LCD Screen will display “Memory full.” To continue with memory programming, you must delete or edit existing speed dial numbers. 2. If you mis-type entering the phone number, you can move through the number and edit it by pressing the SHIFT RIGHT or LEFT button. To delete a character or number inside the cursor, press the DEL/INT button. 17 manual 9742.qxd 1/11/2003 11:25 AM Page 26 Caller ID System Operation Telephone Keypad Characters The TELEPHONE KEYPAD buttons are used to enter characters when entering names and numbers. Press the appropriate TELEPHONE KEYPAD button to get the following characters. You can store a maximum of 18 characters on the letter icon and a maximum of 22 digits on the number icon. Keypad Buttons 1st Press 2nd Press 3rd Press 4th Press 5th Press 6th Press 7th Press 8th Press 9th Press Space ‘ Space EXAMPLE: If you want to enter the name “ALEX” with telephone number “2426978,” dial this sequence: DIR/ 1. Press the ESC button. The LCD Screen will display “Phone book.” 2. Press the FLASH/EDIT button to create a new DIRECTORY (PHONE BOOK) entry. 3. Press the following TELEPHONE KEYPAD buttons to get the desired letters: TELEPHONE KEYPAD BUTTON 555 33 99 LETTER 4. Press the SCROLL DOWN button to move the cursor to the number icon. 5. Press the TELEPHONE KEYPAD to buttons to get the desired numbers: 6. Press and hold the SAVE /RE/PA button to store the data in the DIRECTORY (PHONE BOOK) memory. 18 manual 9742.qxd 1/11/2003 11:25 AM Page 27 Caller ID System Operation Placing Calls from the DIRECTORY (PHONE BOOK) DIR/ 1. Press the ESC button. The LCD Screen will display “Phone book.” 2. Press the SCROLL UP or DOWN button to find the record you want to call. OR Press a TELEPHONE KEYPAD ( 2 /ABC to 9 /WXY) that corresponds to the first letter of a name. Press the SCROLL UP or DOWN button to find the record you wish to call. 3. Press the # /OPTION button to change the displayed number to 7, 10, or 11 digits. The first dialing option displayed is the 11 digits for a long distance call. First press. Press the # /OPTION button for the second time, the displayed number will change to 7 digits for a local call. Second press. Press the # /OPTION button for the third time, the displayed number will change to 10 digits for a local call with area code. 4. Press the TALK Third press. button to dial the displayed number. 5. To end the call, either press the UNIT. TALK button or place the HANDSET on the BASE Editing a Stored Number in the DIRECTORY (PHONE BOOK) DIR/ 1. Press the ESC button. The LCD Screen will display “Phone book.” 2. Press the SCROLL UP or DOWN button to find the record you wish to edit. 3. Press the button. The entry will display with a flashing prompt over the first character of the name field. FLASH/EDIT 4. Move the cursor to the letter or number you wish to edit by pressing the SCROLL UP or DOWN , SHIFT RIGHT or LEFT button. To erase a character or digit, press the DEL/INT button. To add a letter or number, use the TELEPHONE KEYPAD 1 to 0 /OPER buttons. Characters or numbers will be inserted in front of the cursor (See page 18 for details.) 5. When the entry is edited as you desire, press and hold the store the edited record. 19 SAVE /RE/PA button to manual 9742.qxd 1/11/2003 11:25 AM Page 28 Caller ID System Operation Deleting a Stored Record in the DIRECTORY (PHONE BOOK) DIR/ 1. Press the ESC button. The LCD Screen will display “Phone book.” 2. Press the SCROLL UP or DOWN button to find the record you wish to delete. 3. Press the DEL/INT button. The LCD screen will display “Erase item?” 4. To delete the record, press the preceeding Caller ID record. 5. Press the DIR/ ESC DEL/INT button again. The LCD Screen will display the button to return to STANDBY mode. PREFERRED CALLS You can assign stored numbers a PREFERRED CALL status. When an incoming call is matched to a stored number designated as PREFERRED, the phone will generate a special ringer sound or play the RINGER MELODY assigned by the user after the Caller ID information is received. When you are saving the name and number into the DIRECTORY (PHONE BOOK), add a “#” symbol at the beginning of the name by pressing the # /OPTION button. To assign a RINGER MELODY, add a “#” symbol followed by the desired RINGER MELODY number (1~0) at the beginning of the name. To hear a sample of the RINGER MELODY sound, see page 23 for details. BLOCKED CALLS You can assign stored numbers a BLOCKED CALL status. When an incoming call is matched to a stored number designated as blocked, the phone will not ring after the Caller ID information is received. When you are saving the name and number into the DIRECTORY (PHONE BOOK), add an “*” symbol at the beginning of the name by pressing the * button. “C-F” (Forwarded Call) The “CF” icon pops-up on the LCD Screen, when the incoming call has been assigned to your telephone number and the service is provided by your local telephone company. “L-D-C” (Long Distance Call) The “LDC” icon pops-up on the LCD Screen, when the incoming call is a long distance call and the service is provided by your local telephone company. 20 manual 9742.qxd 1/11/2003 11:25 AM Page 29 Caller ID System Operation Outgoing Calls This telephone remembers the last 8 OUTGOING CALLS. The name, time, date, and the duration of the call are recorded. 1. With the HANDSET in STANDBY mode, press the SHIFT LEFT button. The LCD Screen will display “Outgoing call.” 2. Pressing the SCROLL DOWN button will go through the calls from the last to the latest OUTGOING CALL record. Pressing the SCROLL UP button will allow you to view the calls from the latest call to the last. 3. To make a follow-up call, press the the displayed record. TALK button to dial Function Settings For HANDSET You can change the setting on the HANDSET in the functions menu. Access the functions menu by pressing the VOL /MENU button. There are 12 settings in the functions menu which can be changed. You can scroll through the function menu in the listed order by pressing the SCROLL DOWN button. Settings can be accessed by pressing the corresponding TELEPHONE KEYPAD button. To edit a setting, press the button, use the SCROLL UP or DOWN button to toggle between the setting options, and then press and hold the SAVE /RE/PA button to save the changes. Press the VOL /MENU button to exit the functions menu. FLASH/EDIT TELEPHONE KEYPAD Function Ring Hi/Low/Off: Changes the volume of the ringer on the HANDSET or turn the ringer OFF. Ringer Melody: Changes the HANDSET ring melody. First Ring On/Off: Turns the first ring of the phone OFF so that it does not ring until Caller ID information has been displayed. Particularly useful when using the PREFFERED and BLOCKED call features or the PRIVATE and UNAVAILABLE ring settings. Time Set: Changes the time and date. Contrast: Adjusts the brightness of the LCD Screen for optimum viewing. 21 manual 9742.qxd 1/11/2003 11:25 AM Page 30 Caller ID System Operation TELEPHONE KEYPAD Function PBX Number: Inserts if a “PBX Number” before an outgoing number is dialed. Select the number (0-9) which is required to access an outside line when using a switchboard system, and the phone will automatically dial the PBX number and a pause before any speed dial or Caller ID callback number. factory setting is “OFF.” Language: Changes the language that appears on the LCD Screen. Choose between English, Spanish or French. User Name: Changes the user that appears on the LCD Screen during STANDBY mode. MSG Waiting Delete: Clears current message waiting indication. Area Code: Adds the local Area Code to numbers that were stored as 7-digits in the phone book and 10-digit dialing is required in the local calling area. Register: Initiates the registration of HANDSET/S into the BASE UNIT. Alarm Clock: Sets the Alarm clock time. NOTE: At any time during options programming you can quit and the settings that you have changed will be saved. Press the VOL /MENU button to quit the options menu or let the options programming time out by not pressing any TELEPHONE KEYPAD buttons for 20 seconds. A. Setting the Ringer Level 1. Press the VOL 2. Press the 3. Press the /MENU button to enter the menu. button to go to the RINGER LEVEL programming option. FLASH/EDIT button to change the setting. “High” will begin flashing. 4. Press the SCROLL UP or DOWN button to toggle between HI, LOW, and OFF. 5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. VOL 22 /MENU button to return to STANDBY manual 9742.qxd 1/11/2003 11:25 AM Page 31 Caller ID System Operation B. Setting the Ringer Melody 1. Press the VOL 2. Press the 3. Press the /MENU button to enter the menu. button to go to the RINGER MELODY programming option. FLASH/EDIT button to change the setting. “2” will begin flashing. 4. Press the SCROLL UP or DOWN button to select 1 of the 10 RINGER MELODIES available. A ringer sample will be heard for 2 seconds when toggling from one RINGER MELODY to another. The preset RINGER MELODY is “2.” 5. When the desired setting is displayed, press and hold the the setting. 6. Continue with programming or press the mode. VOL SAVE /RE/PA button to save /MENU button to return to STANDBY C. Turning the FIRST RING ON or OFF 1. Press the VOL 2. Press the 3. Press the /MENU button to enter the menu. button to go to the FIRST RING programming option. FLASH/EDIT button to change the setting. “ON” will begin flashing. 4. Press the SCROLL UP or DOWN button to toggle between ON or OFF. 5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. /MENU button to return to STANDBY VOL D. Setting the Time and Date 1. Press the 2. Press the 3. Press the /MENU button to enter the menu. VOL button to go to the TIME set programming option. FLASH/EDIT button to change the setting. The hour will begin flashing. 4. Press the TELEPHONE KEYPAD will begin flashing. to 23 button to enter the hour. The minute manual 9742.qxd 1/11/2003 11:25 AM Page 32 Caller ID System Operation 5. Press the TELEPHONE KEYPAD “PM” will begin flashing. to button to enter the minute. “AM” or 6. Press the TELEPHONE KEYPAD 1 button to choose AM or press the to choose PM. The month will begin flashing. 7. Press the TELEPHONE KEYPAD will begin flashing. 8. Press the TELEPHONE KEYPAD to to button button to enter the month. The date button to enter the date. 9. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long beep will sound and you are returned to the options menu. 10. Continue with programming or press the mode. VOL /MENU button to return to STANDBY E. Adjusting the Contrast 1. Press the VOL 2. Press the 3. Press the /MENU button to enter the menu. button to go to the CONTRAST programming option. FLASH/EDIT button to change the setting. “4” will begin flashing. 4. Press the SCROLL UP contrast. or DOWN button to toggle from 1 to 8 levels of 5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. VOL /MENU button to return to STANDBY F. Setting the PBX Number 1. Press the VOL /MENU button to enter the menu. 2. Press the 3. Press the FLASH/EDIT button to go to the PBX NUMBER programming option. button to change the setting. “OFF” will begin flashing. 4. Press the SCROLL UP or DOWN button to customize the digit to match your PBX system. When not connected to a PBX, the phone will only function normally when set to “OFF.” 24 manual 9742.qxd 1/11/2003 11:25 AM Page 33 Caller ID System Operation 5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. VOL /MENU button to return to STANDBY G. Changing the Language 1. Press the VOL 2. Press the 3. Press the /MENU button to enter the menu. button to go to the LANGUAGE programming option. FLASH/EDIT button to change the setting. “English” will begin flashing. 4. Press the SCROLL UP ESPANOL, and FRANCAIS. or DOWN button to toggle between ENGLISH, 5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. VOL /MENU button to return to STANDBY H. Changing the User Name 1. Press the VOL 2. Press the /MENU button to enter the menu. button to go to the USER NAME programming option. 3. Press the button to change. The entry will display a flashing prompt over the first character of the present USER NAME. FLASH/EDIT 4. Enter the desired USER NAME using the TELEPHONE KEYPAD ( 0 /ABC to 9 /WXY) buttons. The USER NAME can contain a maximum of 12 characters. See page 17 for details. 5. Press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. VOL /MENU button to return to STANDBY NOTE: The USER NAME will be displayed on the HANDSET LCD Screen during STANDBY mode. 25 manual 9742.qxd 1/11/2003 11:25 AM Page 34 Caller ID System Operation I. Deleting Message Waiting Indication 1. Press the VOL 2. Press the 3. Press the flashing. /MENU button to enter the menu. button to go to the MESSAGE WAITING programming option. FLASH/EDIT button to reset the Message Waiting Indication. “Off” will begin 4. Press and hold the SAVE /RE/PA button to delete the indication. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. /MENU button to return to STANDBY VOL J. Setting the Area Code 1. Press the VOL 2. Press the 3. Press the number field. FLASH/EDIT /MENU button to enter the menu. button to go to the AREA CODE programming option. button. The entry will display a flashing prompt at the right side of the 4. Press the TELEPHONE KEYPAD code for your phone number. to buttons to enter the three digit area 5. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. VOL /MENU button to return to STANDBY NOTE: To use the call back function, press the # /OPTION button and then select the 10DIGIT DIALING mode. Press the TALK button and the unit will automatically dial the stored 7-digit number plus the area code. The LCD Screen will only display the last 7-DIGITS for all 10-DIGIT INCOMING CALLS that matched the AREA CODE setting. 26 manual 9742.qxd 1/11/2003 11:25 AM Page 35 Caller ID System Operation K. Registering the HANDSET 1. Press the 2. Press the VOL /MENU button to enter the menu. button to go to the REGISTER programming option. 3. Press the button. The LCD Screen will prompt “Select base.” The default setting is “BASE 1 (B1)”. FLASH/EDIT 4. To confirm, press the button again. The LCD Screen will display “Put down H/S”. Put the HANDSET on the BASE UNIT charge cradle within 6 seconds. A confirmation “beep” tone will be heard. FLASH/EDIT 5. The BASE UNIT will automatically assign the ID number of the newly registered HANDSET. The HANDSET ID # will be displayed on the LCD Screen. 6. To register more HANDSETS, follow steps 1 to 4. 7. Continue with programming or press the button to return to STANDBY mode. VOL /MENU NOTE: To register the HANDSET/S to another BASE UNIT. Select the BASE 2 option by pressing the SCROLL UP or DOWN button. The second BASE UNIT (B2) must be connected to a separate telephone line. L. Setting the ALARM CLOCK 1. Press the VOL 2. Press the /MENU button to enter the menu. /OPTION button to go to the ALARM CLOCK programming option. 3. Press the button. Set the time by pressing the TELEPHONE KEYPAD 1 to 0 buttons. Press the 1 button to enter AM, or 2 button to enter PM. The default ALARM CLOCK setting is “Off.” FLASH/EDIT 4. When the desired setting is displayed, press and hold the SAVE /RE/PA button to save the setting. A long “beep” will sound to confirm the setting has been saved. 5. Press the VOL /MENU button to return to STANDBY mode. NOTE: To stop the alarm, press any TELEPHONE KEYPAD button. The ALARM setting is one short setting and once activated it has to be re-set for the next alarm. 27 manual 9742.qxd 1/11/2003 11:25 AM Page 36 Caller ID System Operation Function Settings for BASE UNIT You can change the setting on the HANDSET in the funtions menu. Access the functions menu by pressing and holding the INT /MENU button. There are 11 settings in the functions menu which can be changed. You can scroll through the function menu in the listed order by pressing the SCROLL DOWN button. Settings can be accessed by pressing the corresponding TELEPHONE KEYPAD button on the BASE UNIT. To edit a setting, press the EDIT /FLASH button, use the SCROLL UP or DOWN button to toggle between the setting options, and then press and hold the SAVE /REDIAL button to save the changes Press the INT /MENU button to exit the functions menu. TELEPHONE KEYPAD Funtion Ring Hi/Low/Off: Changes the volume of the ringer on the BASE UNIT or the ringer OFF. First Ring On/Off: Turns the first ring of the phone OFF so that it does not ring until Caller ID information has been displayed. Particularly useful when using the PREFFERED and BLOCKED call features or the PRIVATE and UNAVAILABLE ring settings. Time Set: Changes the time and date. Contrast: Adjust the brightness of the LCD Screen for optimum viewing. PBX Number: Insert a “PBX Number” before an outgoing number is dialed. Select the number (0-9) which is required to access an outside line when using a switchboard system, and the phone will automatically dial the PBX number and a pause before any speed dial or Caller ID callback number. Factory setting is “OFF.” Language: Changes the language that appears on the LCD Screen. Choose between English, French, or Spanish. User Name: Changes the user name (ID) that appears on the LCD Screen during STANDBY mode. Message Waiting Delete: Clears current message waiting indication. Area Code: Adds the local Area Code to numbers that were stored as 7-digits in the phone book and 10-digit dialing is required in the local calling area. Alarm Clock: Sets the Alarm clock time. Dial Mode: 28 manual 9742.qxd 1/11/2003 11:25 AM Page 37 Caller ID System Operation A. Setting the Ringer Level 1. Press the and hold INT /MENU button to enter the menu. 2. Press the 3. Press the 1 button to go to the RINGER LEVEL programming option. EDIT /FLASH button to change the setting. “High” will begin flashing. 4. Press the SCROLL UP or DOWN button to toggle between HI, LOW, and OFF. 5. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. /MENU button to return to STANDBY INT B. Turning the FIRST RING ON or OFF 1. Press the and hold INT /MENU button to enter the menu. 2. Press the 3. Press the EDIT button to go to the FIRST RING programming option. /FLASH button to change the setting. “ON” will begin flashing. 4. Press the SCROLL UP or DOWN button to toggle between ON or OFF. 5. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. /MENU button to return to STANDBY INT C. Setting the Time and Date 1. Press the and hold INT /MENU button to enter the menu. 2. Press the 3. Press the EDIT button to go to the TIME set programming option. /FLASH button to change the setting. The hour will begin flashing. 4. Press the TELEPHONE KEYPAD will begin flashing. 5. Press the TELEPHONE KEYPAD “PM” will begin flashing. to to 29 button to enter the hour. The minute button to enter the minute. “AM” or manual 9742.qxd 1/11/2003 11:25 AM Page 38 Caller ID System Operation 6. Press the TELEPHONE KEYPAD 1 button to choose AM or press the to choose PM. The month will begin flashing. 7. Press the TELEPHONE KEYPAD will begin flashing. 8. Press the TELEPHONE KEYPAD to to button button to enter the month. The date button to enter the date. 9. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long beep will sound and you are returned to the options menu. 10. Continue with programming or press the mode. INT /MENU button to return to STANDBY D. Adjusting the Contrast 1. Press the and hold INT /MENU button to enter the menu. 2. Press the 3. Press the EDIT button to go to the CONTRAST programming option. /FLASH button to change the setting. “4” will begin flashing. 4. Press the SCROLL UP contrast. or DOWN button to toggle from 1 to 8 levels of 5. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. INT /MENU button to return to STANDBY E. Setting the PBX Number 1. Press the and hold INT /MENU button to enter the menu. 2. Press the 3. Press the EDIT button to go to the PBX NUMBER programming option. /FLASH button to change the setting. “OFF” will begin flashing. 4. Press the SCROLL UP or DOWN button to customize the digit to match your PBX system. When not connected to a PBX, the phone will only function normally when set to “OFF.” 5. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. 30 INT /MENU button to return to STANDBY manual 9742.qxd 1/11/2003 11:25 AM Page 39 Caller ID System Operation F. Changing the Language 1. Press the and hold INT /MENU button to enter the menu. 2. Press the 3. Press the EDIT button to go to the LANGUAGE programming option. /FLASH button to change the setting. “English” will begin flashing. 4. Press the SCROLL UP ESPANOL, and FRANCAIS. or DOWN button to toggle between ENGLISH, 5. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. INT /MENU button to return to STANDBY G. Changing the User Name 1. Press the and hold 2. Press the INT /MENU button to enter the menu. button to go to the USER NAME programming option. DEL 3. Press the EDIT /FLASH button to change. The entry will display a flashing prompt over the first character of the present USER NAME. 4. Enter the desired USER NAME using the TELEPHONE KEYPAD ( 2 /ABC to 9 /WXY) buttons. The USER NAME can contain a maximum of 12 characters. See page 17 for details. 5. Press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. INT /MENU button to return to STANDBY NOTE: The USER NAME will be displayed on the BASE UNIT LCD Screen during STANDBY mode. H. Deleting Message Waiting Indication 1. Press the and hold 2. Press the INT /MENU button to enter the menu. button to go to the MESSAGE WAITING programming option. 31 manual 9742.qxd 1/11/2003 11:25 AM Page 40 Caller ID System Operation 3. Press the flashing. EDIT /FLASH button to reset the Message Waiting Indication. “Off” will begin 4. Press and hold the SAVE /REDIAL button to delete the indication. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. /MENU button to return to STANDBY INT I. Setting the Area Code 1. Press the and hold INT /MENU button to enter the menu. 2. Press the button to go to the AREA CODE programming option. 3. Press the EDIT /FLASH button. The entry will display a flashing prompt at the right side of the number field. 4. Press the TELEPHONE KEYPAD code for your phone number. to buttons to enter the three digit area 5. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 6. Continue with programming or press the mode. INT /MENU button to return to STANDBY J. Setting the ALARM CLOCK 1. Press the and hold 2. Press the INT /MENU button to enter the menu. button to go to the ALARM CLOCK programming option. 3. Press the EDIT /FLASH button. Set the time by pressing the TELEPHONE KEYPAD 0 to 1 buttons. Press the 1 button to enter AM, or 2 button to enter PM. The default ALARM CLOCK setting is “Off.” 4. When the desired setting is displayed, press and hold the SAVE /REDIAL button to save the setting. A long “beep” will sound to confirm the setting has been saved. 5. Press the INT /MENU button to return to STANDBY mode. NOTE: To stop the alarm, press any TELEPHONE KEYPAD button. The ALARM setting is one short setting and once activated it has to be re-set for the next alarm. K. Dial Mode 32 manual 9742.qxd 1/11/2003 11:25 AM Page 41 Multi-HANDSET, Multi-BASE UNIT System OperatioN Multi-HANDSET, Multi-BASE UNIT System The system supports the registration of 9 HANDSETS into the BASE UNIT. The user at his option can add another BASE UNIT (B2) and register the same HANDSETS. The HANDSETS can make an INTERCOM CALL, CALL TRANSFER to one another provided they are linked to the same BASE UNIT at a time. Intercom Call from HANDSET to HANDSET 1. With the HANDSET in STANDBY mode, press the button . The LCD Screen of the initiating HANDSET will display “Select H/S:.” FLASH/EDIT Initiating HANDSET 2. Enter the ID # of the receiving HANDSET by pressing the TELEPHONE KEYPAD 1 to 9 buttons (self exclusive). Initiating HANDSET 3. The receiving HANDSET will receive a page tone and the LCD Screen will display “Handset # X, Paging you.” 4. The receiving HANDSET will connect by pressing the button. Both LCD Screen will display “Intercom With:, Handset # X.” Receiving HANDSET FLASH/EDIT 5. To end the INTERCOM CALL, press the again. The LCD Screen of both HANDSET will return to Standby mode. FLASH/EDIT Both HANDSET Receiving a Call while in Intercom Call 1. When a call arrives, both HANDSET of the already connected Intercom call will emit two short double “beep” sound. The Caller ID information, if available, will display on the LCD Screen after the alert beep. 2. Press the call. 3. Press the DEL/INT TALK button to terminate the Intercom button to access the call. Intercom Call from HANDSET to BASE UNIT 1. Press the DEL/INT button and the KEYPAD button on the HANDSET. 2. The BASE UNIT emits a beep sound, simultaneously the IN USE LED indicator will light up and the BASE UNIT will display INTERCOM. 3. The BASE UNIT user can respond by pressing the conversation with the caller from the HANDSET. 33 DEL /MENU button and start manual 9742.qxd 1/11/2003 11:25 AM Page 42 Multi-HANDSET, Multi-BASE UNIT System Operation 4. To end the conversation press the DEL/INT button again. Intercom Call from BASE UNIT to HANDSET 1. Press the INT /MENU on the BASE UNIT. The LCD Screen of the initiating BASE UNIT will display “Select H/S:.” 2. Enter the ID # of the receiving HANDSET by pressing the TELEPHONE KEYPAD 1 to 9 buttons (self exclusive). 3. The receiving HANDSET will receive a page tone and the LCD Screen will display “Base Unit # X, Paging you.” 4. The receiving HANDSET will connect by pressing the DEL/INT button. Both LCD Screen will display “Intercom With:, Base Unit # X.” 5. To end the INTERCOM CALL, press the INT /MENU again. The LCD Screen of both HANDSET and BASE UNIT will return to Standby mode. Transfer Call from HANDSET to HANDSET 1. During a call conversation, press the DEL/INT button. The LCD Screen of the initiating HANDSET will display “Select H/S:.” 2. Enter the ID # of the receiving HANDSET by pressing the TELEPHONE KEYPAD 1 to 9 buttons (self exclusive). Initiating HANDSET Receiving HANDSET 3. The initiating HANDSET will return to STANDBY mode. 4. The receiving HANDSET will receive a special alerting tone and the LCD Screen will display “Transfer call.” If available, the caller’s telephone number will be displayed on the LCD Screen after the first ring. 5. The receiving HANDSET will answer the call by pressing the TALK button. 6. If the receiving HANDSET does not answer the call within 30 seconds, the initiating HANDSET will receive a ring back melody. 34 Receiving HANDSET Operation manual 9742.qxd 1/11/2003 11:25 AM Page 43 Multi-HANDSET, Multi-BASE UNIT System Operation Transfer Call from HANDSET to BASE UNIT 1. During a call conversation, press the DEL/INT button and KEYPAD 0 button to page the BASE UNIT user. The BASE UNIT emits a rapid sound. If the BASE UNIT user does not respond, press DEL/INT button again to return to the call. 2. The BASE UNIT user can press the INT /MENU button to answer. An intercom link between the HANDSET and BASE UNIT is established and the call will be put on hold. 3. If the BASE UNIT user does not want to access the call while in intercom mode, the user can press the INT /MENU button on the BASE UNIT to return the call to the HANDSET user or the HANDSET user can press the TALK button or DEL/INT button to return the call. 4. To transfer the call, the BASE UNIT user must press the button. the HANDSET user could stay on the line to join a three-way conversation by pressing the TALK button. Press the TALK button again to release the line to the BASE UNIT user. SPEAKER Transfer Call from BASE UNIT to HANDSET 1. During the conversation through the BASE UNIT in the SPEAKERPHONE mode and the HANDSET is on the BASE CRADLE, picking up the HANDSET automatically transfers the call from the BASE UNIT to the HANDSET. 2. If the HANDSET is out of the BASE UNIT charge cradle, press the int/ menu button on the BASE UNIT. The HANDSET emits a rapid beep sound. If the HANDSET user does not respond, press the INT /MENU to return to call. 3. The HANDSET user can press the DEL/INT button to answer. An intercom link between the BASE UNIT and the HANDSET is established and the call will be put on hold. 4. To transfer the call, the HANDSET user must press the TALK button. the BASE UNIT user could stay on the line to join a three-way conversation by pressing the button. If you wish to release the line to the HANDSET user, press the speaker button again. SPEAKER 35 manual 9742.qxd 1/11/2003 11:25 AM Page 44 Speakerphone Operation Speakerphone Operation This telephone allows you to answer calls using the BASE UNIT through the speakerphone function. A. Activating Speaker Phone while the HANDSET is out of the BASE UNIT. 1. When the phone rings, press the button. SPEAKER 2. Start your conversation. 3. To end your conversation, press the SPEAKER button again B. Activating Speaker Phone while the HANDSET is on the BASE UNIT. 1. When the phone rings, press the button. SPEAKER 2. Start your conversation, while the conversation is active, you can pick up the HANDSET from the BASE CRADLE, the call will automatically transfer to the HANDSET. 3. To end your conversation, press the SPEAKER button again NOTE: The calls can be able to transmit to the HANDSET even the HANDSET is being removed from the BASE CRADLE. (See Intercom Operation on page .) 37 manual 9742.qxd 1/11/2003 11:25 AM Page 45 Security System Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone line by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and the HANDSET. Security Code This telephone has an internal security code with 4,000,000 possible combinations. Resetting Security Code and Channel Information Communication between the HANDSET and the BASE UNIT may not be possible in any of the following situations: 1. After a power failure. 2. After relocating the BASE UNIT by disconnecting the AC ADAPTOR. 3. After replacing the HANDSET BATTERY PACK. 77 Channel Auto-Hop Your cordless telephone automatically selects the best channel from the 77 frequencies available to transmit signals between the BASE UNIT and the HANDSET. When an interference is received from other cordless telephones, your telephone automatically hops to the next clear channel. 38 manual 9742.qxd 1/11/2003 11:25 AM Page 46 Recharging the BATTERY PACK Changing th Battery Type Use the following type and size of BATTERY PACK: Cordless Telephone BATTERY PACK 3.6V, 800mAh U.S. Electronics Inc. Ni-Cd BATTERY PACK: Model B658 Ni-Cd This BATTERY PACK is available through: U.S. Electronics Service Center 105 Madison Avenue New York, NY 10016 1-800-828-5208 NOTES: 1. During a power interruption, the BASE UNIT does not operate, and a phone conversation cannot be made on the HANDSET. Recharging the BATTERY PACK The nickel cadmium (Ni-Cd) BATTERY PACK in the HANDSET can be recharged many times using the built-in charger in the BASE UNIT. When the BATTERY CHARGE INDICATOR appears with two bars blinking on the LCD Screen, a “beep” sound will be heard every 10 seconds. This indicates that the BATTERY PACK needs to be recharged. Charge the BATTERY PACK at least once every 90 days of non-use to avoid battery failure. When the BATTERY PACK can no longer be charged, replacement of the BATTERY PACK will be necessary. The BATTERY PACK used in your telephone may develop a condition known as “MEMORY.” Once subjected to a regular short discharging routine, the BATTERY PACK assumes the discharging pattern it was subjected to. This causes rapid discharging thereby shortening the BATTERY PACK charge span. If you believe your BATTERY PACK has developed a “MEMORY” condition, do not charge the HANDSET until the BATTERY CHARGE INDICATOR appears with two bars blinking on the LCD Screen. When the BATTERY CHARGE INDICATOR appears with two bars blinking on the LCD Screen, charge the HANDSET fully for 12 hours. IMPORTANT In order to get maximum life from the HANDSET BATTERY PACK, be sure to charge the HANDSET for 12 hours before initial use. 39 manual 9742.qxd 1/11/2003 11:25 AM Page 47 Changing the BATTERY PACK Changing the BATTERY PACK The BATTERY PACK provides power for the HANDSET of your cordless telephone. To Replace the BATTERY PACK: 1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down. 2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK. 3. Plug the new BATTERY PACK into the BATTERY CONNECTOR. 4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position. 5. Before use, charge the new BATTERY PACK for 12 hours. ATTENTION: The telephone that you have purchased contains a rechargeable BATTERY PACK. The BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. IMPORTANT In order to get maximum life from the HANDSET BATTERY PACK, be sure to charge the HANDSET for 12 hours before initial use. 40 manual 9742.qxd 1/11/2003 11:25 AM Page 48 Problem Solving Problem Solving Section For your assistance, we have listed below a few common problems. Phone does not work, check the following: 1. BASE UNIT is plugged into a power source. 2. HANDSET is charged. 3. TONE/PULSE Select Switch is in the right position. 4. TELEPHONE LINE CORD is plugged into the TELEPHONE JACK. Range of phone limited, check the following: 1. BASE UNIT is centrally located in your residence. 2. BASE UNIT is not located near appliances. No dial tone, check the following: 1. TELEPHONE LINE CORD plugs are connected to the TELEPHONE JACK and TELEPHONE LINE CONNECTION JACK. 2. BASE UNIT is plugged into a power source. Received signal flutters or fades, check the following: 1. BATTERY PACK in the HANDSET is fully charged. 2. HANDSET is not too far from the BASE UNIT. Interference on reception, check the following: 1. Noise may be picked up from electrical products in the home or electrical storms. Generally, this noise is a minor annoyance and should not be interpreted as a defect in your system. (See Technical Information on page 43). Excess static, check the following: 1. Check to see that the ANTENNA is not touching another metal object. If after pressing the TALK button, you receive three “beeps” and no dial tone, check the following: 1. BASE UNIT is plugged into a power source. 41 manual 9742.qxd 1/11/2003 11:25 AM Page 49 Problem Solving Answering System does not work, check the following: 1. BASE UNIT is plugged into the power source. 2. Reset the system by pressing and holding the RESET button for 2 seconds at the top side of the BASE UNIT. Answering System does not answer calls, check the following: 1. ANSWER ON/OFF LED indicator is lit. Answers calls only after 10 rings, check the following: 1. ANSWER ON/OFF LED indicator is lit. 2. Message Memory is not full. Does not respond to remote commands, ensure the following: 1. Correct Remote Access Code is entered. 2. A TONE telephone is being used. Messages are incomplete, ensure the following: 1. Message Memory is not full. 2. Caller may be hesitating and pausing for more than 7 seconds. Answers calls but does not record messages, check the following: 1. ANNC/ICM switch is set to ICM. 2. Memory is not full. 3. Extension telephone was not picked up. NOTE: If none of the telephones in the house are working, disconnect one set at a time to verify that one of the telephones are causing the problem. If you still have a problem after doing this, and your telephone still does not work, please contact your local phone company. 42 manual 9742.qxd 1/11/2003 11:25 AM Page 50 Technical Information FCC Require Technical Information This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. Noise Electrical pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms. Certain kinds of electrical equipment such as light dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio frequencies are susceptible to these noise pulses, you may occasionally hear them in your HANDSET. Generally they are a minor annoyance and should not be interpreted as a defect in your system. Range Because radio frequency is used, the location of the BASE UNIT can affect the operating range. Try several locations in your home or office and pick the one that gives you the clearest signal to the HANDSET. Interference Electronic circuits activate a relay to connect the cordless telephone to your telephone line. These electronic circuits operate in the radio frequency spectrum. While several protection circuits are used to prevent unwanted signals, there may be periods when these unwanted signals enter the BASE UNIT. You may hear clicks or hear the relay activate while you are not using the HANDSET. If the interference occurs frequently, it can be minimized or eliminated by relocating the BASE UNIT. You can check for interference before selecting the final BASE UNIT location by plugging in the telephone. NOTICE: This cordless telephone uses radio communication between the HANDSET and the BASE UNIT and may not ensure privacy of communication. Other devices, including other cordless telephones, may interfere with the operation of this cordless telephone or cause noise during operation. Units not containing coded access may be accessed by other radio communication systems. Cordless telephones must not cause interference to any licensed radio service. 43 manual 9742.qxd 1/11/2003 11:25 AM Page 51 FCC Requirements Federal Communications Commission Requirements This equipment complies with Part 68 of the FCC Rules. A label on the BASE UNIT of this equipment contains, among other information, the ACTA product number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company. The REN is also useful in determining the quantity of devices that you may connect to your telephone line and still allow these devices to ring when your telephone number is called. In most areas, but not all, the sum of the RENs for all devices connected to one line should not exceed five (5.0). To be certain of the number of devices that you may connect to your line, you should contact your local telephone company. If your equipment should cause harm to the telephone network, the telephone company may temporarily disconnect your service. If possible, they will notify you in advance that temporary discontinuance of service may be required. However, when advanced written notice is not possible, the telephone company may temporarily discontinue service without notice if such action is necessary under the circumstances. The telephone company may make changes in its communication facilities, equipment, operations, or procedures where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations of the Federal Communications Commission. Do not attempt to repair or modify this equipment. WARNING: Changes or modifications not expressly approved by the party responsible for its compliance could void the user’s authority to operate the equipment. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the BASE UNIT of the cordless telephone should not be placed on or near a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. IMPORTANT Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference. 44 manual 9742.qxd 1/11/2003 11:25 AM Page 52 FCC Requirements Warranty Federal Communications Commission Requirements (continued) This equipment should not be used on coin telephone lines. Connection to party line service is subject to state tariffs. If trouble is experienced, disconnect this equipment from the telephone line to determine if it is causing the malfunction. If the equipment is determined to be malfunctioning, its use should be discontinued until the problem has been corrected. NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. 1. Reorient or relocate the receiving ANTENNA. 2. Increase the distance between the equipment and the receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Relevant Guidelines and Standards are: • FCC Report and Order FCC 96-326 (August, 1996) • American National Standards Institute (C95-1-1992) • National Council Radiation Protection and Measuremants (NCRP-1986) • International Commission on Non-Ionizing Radiation Protection (ICNIRP-1998) 45 manual 9742.qxd 1/11/2003 11:25 AM Page 53 Warranty Warranty Information BellSouth Products One-Year Limited Warranty This limited warranty sets forth all BellSouth Products responsibilities regarding your product. There are no other expressed or implied warranties from BellSouth Products. Warranty Service Provided If you purchased the telephone new from a retail vendor, BellSouth Products warrants the telephone against defects in material and workmanship for a period of one (1) year from the original date of purchase. This warranty is in lieu of all other expressed warranties. This warranty begins when you purchase the telephone and continues for one (1) year unless you sell or rent the telephone, in which case the warranty stops. BellSouth Products disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose, as of the date of 90 days from your original purchase of the telephone. BellSouth Products assumes no responsibility for any special, incidental, or consequential damages. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitations of special, incidental or consequential damages, or limitations on how long a warranty lasts, so the above exclusion and limitation may not apply to you. Warranty Service Not Provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, the affixing of any attachment not provided by BellSouth Products with the telephone and/or loss of parts. This warranty is voided in the event any unauthorized person opens, alters or repairs the telephone. All BellSouth equipment being returned for repair must be suitably packaged. Telephone companies use different types of equipment and offer various types of services to customers. BellSouth Products does not warrant that this telephone is compatible with the type of equipment of any particular telephone company or the services provided by it. 46 manual 9742.qxd 1/11/2003 11:25 AM Page 54 Warranty Notes What to Do for Warranty Service During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow 2-3 weeks for the return of your telephone product. The shipping address of the authorized service center is: U.S. Electronics CONSUMER CENTER C/O Southern Bonded Warehouse 7137 Southlake Parkway Morrow, GA 30260 NOTE: A product received which was not made for BellSouth Products or which is not defective as determined by our test procedures will not be repaired and will be returned C.O.D., freight. To Obtain Warranty Service • Provide proof of the date of purchase within the package. • Prepay all shipping costs to the authorized service center. • Include a return shipping address within the package. Please retain your sales receipt, the carton, the packing materials, and the printed material. The original carton is the best shipping container for the telephone should you have to return it. For your reference: Serial number Date of Purchase Name of Dealer Visit Us on the Web: www.uselectronics.info Customer Service Telephone Number: 1-800-210-8950 OUTSIDE THE U.S.A. CALL 1-212-242-6978 47 manual 9742.qxd 1/11/2003 11:25 AM Page 55 Notes 48 manual 9742.qxd 1/11/2003 11:25 AM Page 56 Notes Wall Mount T 49 manual 9742.qxd 1/11/2003 11:25 AM Page 57 Wall Mount Template This page serves as a template for attachment of screws to the wall when mounting this telephone on the wall. 1. Cut out this page. 2. Use this template to determine the distance between screws when mounting this phone on the wall. The two cross hairs identify where to attach the screws. 50 manual 9742.qxd 1/11/2003 11:25 AM Page 58 IMPORTANT In order to get maximum life from the HANDSET BATTERY PACK, be sure to charge the HANDSET for 12 hours before initial use. IMPORTANT Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference. IMPORTANT The AC ADAPTOR must always be plugged into an electrical outlet. IMPORTANT In order to utilize the Caller ID feature, you must subscribe to Caller ID service from your local telephone company. IMPORTANT If you live in an area which receives frequent thunderstorms, we strongly recommend plugging your AC ADAPTOR into a surge protector. manual 9742.qxd 1/11/2003 11:25 AM Page 59 Make certain you receive the best performance from your telephone. Read this manual first. Visit Us on the Web: www.uselectronics.info GH9742 XXX Made in China LD
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:01:11 19:24:45Z Modify Date : 2003:01:14 10:27:44+08:00 Page Count : 39 Creation Date : 2003:01:11 19:24:45Z Mod Date : 2003:01:14 10:27:44+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : sharon Metadata Date : 2003:01:14 10:27:44+08:00 Creator : sharon Title : manual 9742.qxd Has XFA : NoEXIF Metadata provided by EXIF.tools