Locks MA 150 Rixson 375 437 Overhead Door Holders 400 407
User Manual: Locks Overhead door holders Mayflower Sales - Rixson Door Controls
Open the PDF directly: View PDF .
Page Count: 8
![](asset-1.png)
Checkmate®Overhead Holders
and Stops
General Information
Overhead stops are used to protect door assemblies.They cut
down the wear and tear of frequency,closing mechanisms,
wind gusts,abuse and vandalism.By limiting door travel,they
can add years to the life of the door,frame,and hanging means.
Overhead holders and friction stays add convenience for the end
user who already appreciates the need for the overhead stop.
Standard Features
■
Non handed.
■
Standard duty product has multiple functions in a single
model (stop,friction and hold open).
■
Non-metal slider eliminates door movement noise.
■
Standard duty and heavy duty models available.
■
New design standard duty units make templating easier
than ever before.
■
Standard duty models allow you to select any degree of
stop you choose up to 110º (after templating).
■
Unique door and frame problems can be solved with
our library of more than 300 special layouts.
■
All units come with appropriate fasteners for any
door material.
■
Torx fasteners optional.
■
All models comply to ANSI 156.8 Grade 1,see individual
model description for exact match.
■
Available in standard architectural and popular
sprayed finishes.
Definitions
■
Friction Stay—Adjustable resistance to door opening.
■
Hold Open—A positive hold state,even when used with
optional closing devices.Not for use on labeled openings.
■
Stop—Keeps doors from traveling past a specified point.
Closer-Holder
Packages
Recommended For
Absolute door control-top
and bottom-with a single
packaged system for high
traffic volume,entrance
and exit conditions.Single
source responsibility saves
money;simplifies
specification;eliminates
coordination of templates.
Combinations
Available
A dependable Rixson 20,25,27,28 or 30-40 Series Closer—
teamed with a “rugged”CheckMate®No.1,8,or 9 Series
Overhead Holder eliminates door and frame damage caused
by racking and twisting.
The combination closer–holder package cushions and dead stops
the door top and bottom,at the selected degree of the opening.
The hold-open function is controlled by the holder and will be
approximately 5º to 7º less than dead stop desired.The 27,28,30
and 40 closer–holder combination is coordinated to dead stop
at the same degree.The impact of opening is absorbed by the
shock spring in the holder at the top,and the hydraulic backcheck
and dead stop in the floor closer at the bottom of the door.
Ordering Information
To order a combination package,order the appropriate closer by
number and degree of stop (i.e.27-105).Order the stop/holder
based on the duty rating and application.The degree of opening
for stops/holders is determined by templating and should match
the closer when installed.
Hold open features are often incorporated into certain door
closers,but the function is best performed by a separated holder
and stop,with a built in shock compression spring.
400
Toll Free:(800) 221-2052 ■Phone:(718) 622-8785 ■Fax:(718) 789-8346
http://www.mfsales.com ■e-mail:pilgrim@mfsales.com
RIXSON
Overhead Holders
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 26
![](asset-2.png)
Typical Applications
Concealed Mounting
Method A - Standard
Installation, Single Acting
Nos. 1, 2, 6 Series
For single acting doors,the jamb brack-
et is mortised into the frame and the
channel mortised into the top of the
door.Both the bracket and channel are
secured with wood or machine screws.
A cut for the arm is required on the stop side of the door only.
A hole must be drilled for the control know of the No.1 Series
holder only.
Method B - Standard
Installation, Double Acting
Nos. 1, 2, 6 Series
For double acting spring hinge and center
hung floor closer or pivot applications.
Mounting is similar to Method A,with the
exception that the cut out for the arm is
required on both sides of the door.
Method C - Inverted
Installation, Single Acting
No. 2 Series
Recommended for doors with mini-
mum top rail depth.The arm and jamb
bracket are mortised into the door,and
the channel installed in the header with
wood or machine screws.A cut out for
the arm is required only on the stop side of the door.
Method D - Rabbeted Door
Installation, Single Acting
No. 2 Series
This method is designed for 1-3/4" doors
with 1/2" maximum rabbet.The jamb
bracket is mortised into the door.Wood or
machine screws are used for fastening.
The cut out for the arm is required on the
stop side of the door only.
Surface Mounting
Method No. 1 -
Standard Installation (Push
side of door)
Nos. 8HD, 9, 10 Series
The jamb bracket mounts on the stop strip
with wood or machine screws.The channel
or door bracket mounts with sex bolts.
Method No. 2 -
Rabbeted Door Installation
(Push side of door)
Nos. 8HD, 9, 10 Series
A special angle jamb bracket adapter mounts
on the header with wood,machine screws or
sex bolts.The jamb bracket attaches to the
adapter with machine screws.The channel
fastens to the door with sex bolts.
Method No. 3 -
Flush Door Installation (Push
side of door)
Nos. 8HD, 9, 10 Series
This method of installation is identical to
Method No.2 for Rabbeted Doors.
Method No. 5 -
Reverse Installation
(Pull side of door)
Nos. 9, 10 Series
The jamb bracket adapter is secured to
the header with wood or machine screws.
The jamb bracket fastens to the adapter
with machine screws and the channel
mounts on the door with sex bolts.
401
RIXSON
Overhead Holders
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 27
![](asset-3.png)
402
Toll Free:(800) 221-2052 ■Phone:(718) 622-8785 ■Fax:(718) 789-8346
http://www.mfsales.com ■e-mail:pilgrim@mfsales.com
RIXSON
Overhead Holders
Heavy Duty 1 Series
Concealed mount - interior or exterior doors
Standard Features
■
Doors may be single or double acting.
■
Non-handed.
■
Slide track design.
■
For use on exterior and interior doors.
■
Recommended for high traffic,heavy abuse installations.
■
Heavy shock absorber spring provides 5º-7º compression
before dead stop.
■
Surface on/off knob on hold open models.
■
Stop,friction stay or hold open functions.
■
Complete screw packet allows for wood or metal door and
frame applications.
■
For security areas,torx screws optional.
■
Standard architectural finishes.
■
Non-metal slide block and shock block.
■
110º maximum opening.
■
1-3/4" minimum door thickness,for thicker doors,note
thickness when ordering.
■
LS option (less spring) available for doors being used with
electromechanical closers & floor closers with dead stop.
■
ANSI No.:
H.O.—C01511
Stop—C01541
■
Available in a variety of sprayed,architectural and stainless
steel finishes including 605 and 630.
Door Opening Chart (in inches)
Butts Center Model number
Offset Pivots Hung Pivots Friction H.O. Stop
*24- 28 — 1-116 1-126 1-136
28-1/16-33 30-36 1-216 1-226 1-236
33-1/16-38 36-1/16-41 1-316 1-326 1-336
38-1/16-43 41-1/16-46 1-416 1-426 1-436
43-1/16-48 46-1/16-50 1-516 1-526 1-536
*Butt hung only on this size door.
Standard Duty 2 Series
Concealed mount - interior or exterior doors
Standard Features
■
Doors may be single or double acting.
■
Non-handed.
■
Slide track design.
■
For use on exterior and interior doors.
■
Recommended for medium traffic,medium weight doors.
■
Degree of opening is fully adjustable and can be adapted to
changing needs.
■
Heavy shock absorber spring provides 5º-7º compression
before deadstop.
■
Multi-function slider for field selection of hold-open,friction
stay or stop only.
■
Complete screw packet allows for installation in wood or
metal door and frame.
■
Torx screws available but,heavy duty units should be
considered for high security applications.
■
Standard architectural finishes.
■
Non-metal slide block and shock block.
■
110º maximum opening.
■
ANSI No.:
Friction—C04511
H.O.—C04531
Stop—C04541
■
Available in a variety of sprayed,architectural and stainless
steel finishes including 605,630,652 and 689.
Door Opening Chart (in inches)
Butts Center
Offset Pivots Hung Pivots Model number
*18-24 — 2-146
24-1/16-30 27-32 2-246
30-1/16-36 32-1/16-38-1/2 2-346
36-1/16-42 38-9/16-45 2-446
42-1/16-48 45-1/16-48 2-546
*Butt hung only on this size door.
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 28
![](asset-4.png)
403
RIXSON
Overhead Holders
Heavy Duty 4 Series
Surface mount—interior or exterior doors
Standard Features
■
Single acting.
■
Non-handed.
■
Rod design.
■
For use on interior or exterior doors.
■
Recommended for industrial areas.
■
Hold open and stop combined.
■
Shock absorber.
■
Metal screws and sex nuts and bolts.
■
Standard architectural finishes.
■
110º maximum opening.
■
ANSI No.:
H.O./Stop—C08511
■
Available in a variety of sprayed and architectural finishes
including 689.
Door Opening Chart (in inches)
Butts Offset Pivots Model Number
Hold Open and Stop
29-34-1/2 4-126
35-40-1/2 4-226
41-46-1/2 4-326
47-53 4-426
Heavy Duty 6 Series
Concealed mount—interior or exterior doors
Standard Features
■
Low profile concealed channel slide track design.
■
Stop function with hold open adapter kit.
■
Designed for installation in aluminum door webbing.
■
Non-handed.
■
Heavy shock absorber spring provides 5º-7º compression
before deadstop.
■
Complete screw packet allows for wood or metal door
and frame.
■
Standard architectural finishes.
■
Non-metal slide block.
■
110º maximum opening.
■
1-3/4" minimum door thickness.
■
ANSI No.:
H.O.—C04511
Stop—C04541
■
Available in a variety of sprayed,architectural and stainless
steel finishes including 630.
Door Opening Chart (in inches)
Butts Center
Offset Pivots Hung Pivots Model Number
*24-28 — 6-146
28-1/16-33 30-36 6-246
33-1/16-38 36-1/16-41 6-346
38-1/16-43 41-1/16-46 6-446
43-1/16-48 46-1/16-50 6-546
*Butt hung only on this size door.
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 29
![](asset-5.png)
404
Toll Free:(800) 221-2052 ■Phone:(718) 622-8785 ■Fax:(718) 789-8346
http://www.mfsales.com ■e-mail:pilgrim@mfsales.com
RIXSON
Overhead Holders
Heavy Duty 7 Series
Surface mount—interior or exterior doors
Standard Features
■
Single acting.
■
Non-handed.
■
Cantilever design.
■
Double spring arm absorbs shock.
■
Self lubricating bronze bearings.
■
Sprayed finishes only.
■
Complete screw packet allows for installation on wood or
metal door and frame.
■
110º maximum opening.
■
ANSI No.:
H.O./Stop—C09511.
■
Available in a variety of sprayed finishes including 689.
Door Opening Chart (in inches)
Butts Offset Pivots Model number
Hold Open and Stop
24-30 7-126
30-1/16-34 7-226
34-1/16-39 7-326
39-1/16-48 7-426
Heavy Duty 8HD Series
Surface mount—interior or exterior doors
Standard Features
■
Single acting doors.
■
Non-handed.
■
Pivot design.
■
For use on exterior or interior doors.
■
Recommended for high traffic,heavy abuse installations.
■
Heavy shock absorber spring provides 6º compression
before dead stop.
■
Fingertip hold open or stop only.
■
Complete screw packet allows for wood or metal door
and frame.
■
For security areas torx screws,optional.
■
Standard architectural finishes.
■
110º maximum opening.
■
1-3/4" minimum door thickness.
■
To mount on pull side of door use angle bracket 5458 LH
or 5459 RH.
■
ANSI No.:
H.O.—C04531
Stop—C04541
■
Available in a variety of powder-coat,architectural and
stainless steel finishes including 626.
Door Opening Chart (in inches)
Butts Center Model Number
Offset Pivots Hung Pivots H.O. Stop
*24-27 26-29-1/2 8-126 8-136
27-1/16-32-1/2 29-9/16-35 8-226 8-236
32-9/16-38-3/4 35-1/16-41-1/2 8-326 8-336
38-13/16-42-1/2 41-9/16-45 8-426 8-436
42-9/16-48 45-1/16-48 8-526 8-536
*Butt hung only on this size door.
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 30
![](asset-6.png)
405
RIXSON
Overhead Holders
Heavy Duty 9 Series
Surface mount—interior or exterior doors
Standard Features
■
Non-handed.
■
Slide track design.
■
Recommended for high traffic,heavy abuse installations.
■
Heavy shock absorber spring provides 5º-7º compression
before dead stop.
■
On/off knob on hold open models.
■
Stop,friction stay or hold open function.
■
Complete screw packet allows for installation in wood
or metal door and frame.
■
For security areas,torx screws optional.
■
Standard architectural finishes.
■
Non-metal slide block and shock block.
■
110º maximum opening.
■
1-3/4" minimum door thickness.
■
LS option (less spring) is available for doors being used with
electro-mechanical closers and floor closers with dead stop.
■
To mount on pull side of door use bracket 5458 LH
or 5459 RH.
■
ANSI No.:
H.O.—C02511
Stop—C02541
■
Available in a variety of sprayed,architectural and stainless
steel finishes including 605 and 630.
Door Opening Chart (in inches)
Butts Center Model Number
Offset Pivots Hung Pivots Friction H.O. Stop
*24-28 25-1/2-30 9-116 9-126 9-136
28-1/16-33 30-1/16-36 9-216 9-226 9-236
33-1/16-38 36-1/16-41 9-316 9-326 9-336
38-1/16-43 41-1/16-46 9-416 9-426 9-436
43-1/16-48 46-1/16-50 9-516 9-526 9-536
*Butt hung only on this size door.
Standard Duty 10 Series
Surface mount—interior or exterior doors
Standard Features
■
Single acting doors.
■
Non-handed.
■
Slide track design.
■
Recommended for medium traffic,medium weight doors
■
Degree of opening fully adjustable and can be adapted
to changing needs.
■
Heavy shock absorber spring provides 5º-7º compression
before deadstop.
■
Multi-function slider for field selection of hold-open,
friction stay or stop only.
■
Complete screw packet allows for installation in wood
or metal door and frame.
■
Torx screws available but,heavy duty units should be
considered for high security applications.
■
Standard architectural finishes.
■
Non-metal slide block and shock block.
■
110º maximum opening.
■
To mount on pull side of door use angle bracket 5258.
■
ANSI No.:
Friction—C05511
H.O.—C05531
Stop—C05541
■
Available in a variety of sprayed,architectural and stainless
steel finishes including 605,630 and 652.
Door Opening Chart (in inches)
Butts Center
Offset Pivots Hung Pivots Model Number
18-24 21-26-1/2 10-146
24-1/16-30 26-9/16-32 10-246
30-1/16-36 32-1/16-38 10-346
36-1/16-42 38-1/16-45 10-446
42-1/16-48 45-1/16-48 10-546
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 31
![](asset-7.png)
406
Toll Free:(800) 221-2052 ■Phone:(718) 622-8785 ■Fax:(718) 789-8346
http://www.mfsales.com ■e-mail:pilgrim@mfsales.com
RIXSON
Overhead Holders
Electro-Mechanical Hold Open 99 Series
Surface mount – interior doors
Standard Features
■
Single-action.
■
Non-handed.
■
Used with independent closers.
■
85° - 110° hold open.
■
Push side or pull side.
■
Detectored or non-detectored.
■
24VAC/24VDC (.090 Amps@24V) or 120 VAC (.018@120V).
■
For doors 32" - 54" wide.
■
Surface or concealed wiring.
■
UL listed door holder.
■
Available in a variety of sprayed finishes including 689.
Models/ANSI
MODEL NUMBERS
DETECTORED NON-DETECTORED
Push Side Mount 99-626 99-726
Pull Side Mount 99-826 99-926
ANSI NUMBERS
DETECTORED NON-DETECTORED
Push Side Mount C00521 C00511
Pull Side Mount C00481 C00471
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 32
![](asset-8.png)
407
RIXSON
Overhead Holders
OLD MODEL NUMBER(S) NEW MODEL NUMBER
1-111,1-113 1-116
1-211,1-213 1-216
1-311,1-313 1-316
1-411,1-413 1-416
1-511,1-513 1-516
1-211,1-213 1-126
1-221,1-223 1-226
1-321,1-323 1-326
1-421,1-423 1-426
1-521,1-523 1-526
1-131,1-133 1-136
1-231,1-233 1-236
1-331,1-333 1-336
1-431,1-433 1-436
1-531,1-533 1-536
3-111,3-121,3-131,5-113,5-123,5-133 2-146
3-211,3-221,3-231,5-213,5-223,5-233 2-246
3-311,3-321,3-331,5-313,5-323,5-333 2-346
3-411,3-421,3-431,5-413,5-423,5-433 2-446
3-511,3-521,3-531,5-513,5-523,5-533 2-546
4-12 4-126
4-22 4-226
4-32 4-326
4-42 4-426
7-12 7-126
7-22 7-226
7-32 7-326
7-42 7-426
8-0211,8-0221 8-126
OLD MODEL NUMBER(S) NEW MODEL NUMBER
8-1211,8-1221 8-226
8-2211,8-2221 8-326
8-3211,8-3221 8-426
8-4211,8-4221 8-526
8-0311,8-0321 8-136
8-1311,8-1321 8-236
8-2311,8-2321 8-336
8-3311,8-3321 8-436
8-4311,8-4321 8-536
9-111,9-113 9-116
9-211,9-213 9-216
9-311,9-313 9-316
9-411,9-413 9-416
9-511,9-513 9-516
9-121,9-123 9-126
9-221,9-223 9-226
9-321,9-323 9-326
9-421,9-423 9-426
9-521,9-523 9-526
9-131,9-133 9-136
9-231,9-233 9-236
9-331,9-333 9-336
9-431,9-433 9-436
9-531,9-533 9-536
33-111,33-121,33-131,55-113,55-123,55-133 10-146
33-211,33-221,33-231,55-213,55-223,55-233 10-246
33-311,33-321,33-331,55-313,55-323,55-333 10-346
33-411,33-421,33-431,55-413,55-423,55-433 10-446
33-511,33-521,33-531,55-513,55-523,55-533 10-546
Checkmate®Conversion Chart
During 1997,Rixson re-designed and improved the Checkmate®
Series.The functions of some models were combined to offer
greater flexibility and additional options.If you are replacing an
old model,there may be some templating changes.Consult us
if you have any questions concerning older Checkmate® holders
and stops.
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 33