Locks MA 150 Rixson 375 437 Overhead Door Holders 400 407
User Manual: Locks Overhead door holders Mayflower Sales - Rixson Door Controls
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
MA-150 Rixson 375-437 1/16/03 12:10 PM Page 26 RIXSON Overhead Holders Checkmate® Overhead Holders and Stops Closer-Holder Packages Recommended For Absolute door control-top and bottom-with a single packaged system for high traffic volume, entrance and exit conditions. Single source responsibility saves money; simplifies specification; eliminates coordination of templates. General Information Overhead stops are used to protect door assemblies.They cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting door travel, they can add years to the life of the door, frame, and hanging means. Overhead holders and friction stays add convenience for the end user who already appreciates the need for the overhead stop. Standard Features ■ Non handed. ■ Standard duty product has multiple functions in a single model (stop, friction and hold open). ■ Non-metal slider eliminates door movement noise. ■ Standard duty and heavy duty models available. ■ New design standard duty units make templating easier than ever before. ■ Standard duty models allow you to select any degree of stop you choose up to 110º (after templating). ■ Unique door and frame problems can be solved with our library of more than 300 special layouts. ■ All units come with appropriate fasteners for any door material. ■ Torx fasteners optional. ■ All models comply to ANSI 156.8 Grade 1, see individual model description for exact match. ■ Available in standard architectural and popular sprayed finishes. Definitions ■ Friction Stay—Adjustable resistance to door opening. ■ Hold Open—A positive hold state, even when used with optional closing devices. Not for use on labeled openings. ■ Stop—Keeps doors from traveling past a specified point. 400 Toll Free: (800) 221-2052 http://www.mfsales.com ■ ■ Combinations Available A dependable Rixson 20, 25, 27, 28 or 30-40 Series Closer— teamed with a “rugged” CheckMate® No. 1, 8, or 9 Series Overhead Holder eliminates door and frame damage caused by racking and twisting. The combination closer–holder package cushions and dead stops the door top and bottom, at the selected degree of the opening. The hold-open function is controlled by the holder and will be approximately 5º to 7º less than dead stop desired.The 27, 28, 30 and 40 closer–holder combination is coordinated to dead stop at the same degree.The impact of opening is absorbed by the shock spring in the holder at the top, and the hydraulic backcheck and dead stop in the floor closer at the bottom of the door. Ordering Information To order a combination package, order the appropriate closer by number and degree of stop (i.e. 27-105). Order the stop/holder based on the duty rating and application.The degree of opening for stops/holders is determined by templating and should match the closer when installed. Hold open features are often incorporated into certain door closers, but the function is best performed by a separated holder and stop, with a built in shock compression spring. Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail: pilgrim@mfsales.com MA-150 Rixson 375-437 1/16/03 12:10 PM Page 27 RIXSON Overhead Holders Typical Applications Concealed Mounting Surface Mounting Method A - Standard Installation, Single Acting Method No. 1 Standard Installation (Push side of door) Nos. 1, 2, 6 Series For single acting doors, the jamb bracket is mortised into the frame and the channel mortised into the top of the door. Both the bracket and channel are secured with wood or machine screws. A cut for the arm is required on the stop side of the door only. A hole must be drilled for the control know of the No. 1 Series holder only. Nos. 8HD, 9, 10 Series The jamb bracket mounts on the stop strip with wood or machine screws.The channel or door bracket mounts with sex bolts. Method No. 2 Rabbeted Door Installation (Push side of door) Nos. 8HD, 9, 10 Series Method B - Standard Installation, Double Acting Nos. 1, 2, 6 Series For double acting spring hinge and center hung floor closer or pivot applications. Mounting is similar to Method A, with the exception that the cut out for the arm is required on both sides of the door. Method C - Inverted Installation, Single Acting No. 2 Series A special angle jamb bracket adapter mounts on the header with wood, machine screws or sex bolts.The jamb bracket attaches to the adapter with machine screws.The channel fastens to the door with sex bolts. Method No. 3 Flush Door Installation (Push side of door) Nos. 8HD, 9, 10 Series This method of installation is identical to Method No. 2 for Rabbeted Doors. Recommended for doors with minimum top rail depth.The arm and jamb bracket are mortised into the door, and the channel installed in the header with wood or machine screws.A cut out for the arm is required only on the stop side of the door. Method No. 5 Reverse Installation (Pull side of door) Method D - Rabbeted Door Installation, Single Acting The jamb bracket adapter is secured to the header with wood or machine screws. The jamb bracket fastens to the adapter with machine screws and the channel mounts on the door with sex bolts. No. 2 Series Nos. 9, 10 Series This method is designed for 1-3/4" doors with 1/2" maximum rabbet.The jamb bracket is mortised into the door.Wood or machine screws are used for fastening. The cut out for the arm is required on the stop side of the door only. 401 MA-150 Rixson 375-437 1/16/03 12:10 PM Page 28 RIXSON Overhead Holders Heavy Duty 1 Series Standard Duty 2 Series Concealed mount - interior or exterior doors Concealed mount - interior or exterior doors Standard Features ■ Doors may be single or double acting. ■ Non-handed. ■ Slide track design. ■ For use on exterior and interior doors. ■ Recommended for high traffic, heavy abuse installations. ■ Heavy shock absorber spring provides 5º-7º compression before dead stop. ■ Surface on/off knob on hold open models. ■ Stop, friction stay or hold open functions. ■ Complete screw packet allows for wood or metal door and frame applications. ■ For security areas, torx screws optional. ■ Standard architectural finishes. ■ Non-metal slide block and shock block. ■ 110º maximum opening. ■ 1-3/4" minimum door thickness, for thicker doors, note thickness when ordering. ■ LS option (less spring) available for doors being used with electromechanical closers & floor closers with dead stop. ■ ANSI No.: H.O.—C01511 Stop—C01541 ■ Available in a variety of sprayed, architectural and stainless steel finishes including 605 and 630. Standard Features ■ Doors may be single or double acting. ■ Non-handed. ■ Slide track design. ■ For use on exterior and interior doors. ■ Recommended for medium traffic, medium weight doors. ■ Degree of opening is fully adjustable and can be adapted to changing needs. ■ Heavy shock absorber spring provides 5º-7º compression before deadstop. ■ Multi-function slider for field selection of hold-open, friction stay or stop only. ■ Complete screw packet allows for installation in wood or metal door and frame. ■ Torx screws available but, heavy duty units should be considered for high security applications. ■ Standard architectural finishes. ■ Non-metal slide block and shock block. ■ 110º maximum opening. ■ ANSI No.: Friction—C04511 H.O.—C04531 Stop—C04541 ■ Available in a variety of sprayed, architectural and stainless steel finishes including 605, 630, 652 and 689. Door Opening Chart (in inches) Door Opening Chart (in inches) Butts Offset Pivots *24- 28 28-1/16-33 33-1/16-38 38-1/16-43 43-1/16-48 Center Hung Pivots — 30-36 36-1/16-41 41-1/16-46 46-1/16-50 Toll Free: (800) 221-2052 http://www.mfsales.com Butts Offset Pivots *18-24 24-1/16-30 30-1/16-36 36-1/16-42 42-1/16-48 Center Hung Pivots — 27-32 32-1/16-38-1/2 38-9/16-45 45-1/16-48 *Butt hung only on this size door. *Butt hung only on this size door. 402 Model number Friction H.O. Stop 1-116 1-126 1-136 1-216 1-226 1-236 1-316 1-326 1-336 1-416 1-426 1-436 1-516 1-526 1-536 ■ ■ Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail: pilgrim@mfsales.com Model number 2-146 2-246 2-346 2-446 2-546 MA-150 Rixson 375-437 1/16/03 12:10 PM Page 29 RIXSON Overhead Holders Heavy Duty 4 Series Heavy Duty 6 Series Surface mount—interior or exterior doors Concealed mount—interior or exterior doors Standard Features ■ Single acting. ■ Non-handed. ■ Rod design. ■ For use on interior or exterior doors. ■ Recommended for industrial areas. ■ Hold open and stop combined. ■ Shock absorber. ■ Metal screws and sex nuts and bolts. ■ Standard architectural finishes. ■ 110º maximum opening. ■ ANSI No.: H.O./Stop—C08511 ■ Available in a variety of sprayed and architectural finishes including 689. Door Opening Chart (in inches) Butts Offset Pivots Model Number Hold Open and Stop 29-34-1/2 4-126 35-40-1/2 4-226 41-46-1/2 4-326 47-53 4-426 Standard Features ■ Low profile concealed channel slide track design. ■ Stop function with hold open adapter kit. ■ Designed for installation in aluminum door webbing. ■ Non-handed. ■ Heavy shock absorber spring provides 5º-7º compression before deadstop. ■ Complete screw packet allows for wood or metal door and frame. ■ Standard architectural finishes. ■ Non-metal slide block. ■ 110º maximum opening. ■ 1-3/4" minimum door thickness. ■ ANSI No.: H.O.—C04511 Stop—C04541 ■ Available in a variety of sprayed, architectural and stainless steel finishes including 630. Door Opening Chart (in inches) Butts Offset Pivots *24-28 28-1/16-33 33-1/16-38 38-1/16-43 43-1/16-48 Center Hung Pivots — 30-36 36-1/16-41 41-1/16-46 46-1/16-50 Model Number 6-146 6-246 6-346 6-446 6-546 *Butt hung only on this size door. 403 MA-150 Rixson 375-437 1/16/03 12:10 PM Page 30 RIXSON Overhead Holders Heavy Duty 7 Series Heavy Duty 8HD Series Surface mount—interior or exterior doors Surface mount—interior or exterior doors Standard Features ■ Single acting. ■ Non-handed. ■ Cantilever design. ■ Double spring arm absorbs shock. ■ Self lubricating bronze bearings. ■ Sprayed finishes only. ■ Complete screw packet allows for installation on wood or metal door and frame. ■ 110º maximum opening. ■ ANSI No.: H.O./Stop—C09511. ■ Available in a variety of sprayed finishes including 689. Door Opening Chart (in inches) Butts Offset Pivots Model number Hold Open and Stop 24-30 7-126 30-1/16-34 7-226 34-1/16-39 7-326 39-1/16-48 7-426 Standard Features ■ Single acting doors. ■ Non-handed. ■ Pivot design. ■ For use on exterior or interior doors. ■ Recommended for high traffic, heavy abuse installations. ■ Heavy shock absorber spring provides 6º compression before dead stop. ■ Fingertip hold open or stop only. ■ Complete screw packet allows for wood or metal door and frame. ■ For security areas torx screws, optional. ■ Standard architectural finishes. ■ 110º maximum opening. ■ 1-3/4" minimum door thickness. ■ To mount on pull side of door use angle bracket 5458 LH or 5459 RH. ■ ANSI No.: H.O.—C04531 Stop—C04541 ■ Available in a variety of powder-coat, architectural and stainless steel finishes including 626. Door Opening Chart (in inches) Butts Offset Pivots *24-27 27-1/16-32-1/2 32-9/16-38-3/4 38-13/16-42-1/2 42-9/16-48 Center Hung Pivots 26-29-1/2 29-9/16-35 35-1/16-41-1/2 41-9/16-45 45-1/16-48 *Butt hung only on this size door. 404 Toll Free: (800) 221-2052 http://www.mfsales.com ■ ■ Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail: pilgrim@mfsales.com Model Number H.O. Stop 8-126 8-136 8-226 8-236 8-326 8-336 8-426 8-436 8-526 8-536 MA-150 Rixson 375-437 1/16/03 12:10 PM Page 31 RIXSON Overhead Holders Heavy Duty 9 Series Standard Duty 10 Series Surface mount—interior or exterior doors Surface mount—interior or exterior doors Standard Features ■ Non-handed. ■ Slide track design. ■ Recommended for high traffic, heavy abuse installations. ■ Heavy shock absorber spring provides 5º-7º compression before dead stop. ■ On/off knob on hold open models. ■ Stop, friction stay or hold open function. ■ Complete screw packet allows for installation in wood or metal door and frame. ■ For security areas, torx screws optional. ■ Standard architectural finishes. ■ Non-metal slide block and shock block. ■ 110º maximum opening. ■ 1-3/4" minimum door thickness. ■ LS option (less spring) is available for doors being used with electro-mechanical closers and floor closers with dead stop. ■ To mount on pull side of door use bracket 5458 LH or 5459 RH. ■ ANSI No.: H.O.—C02511 Stop—C02541 ■ Available in a variety of sprayed, architectural and stainless steel finishes including 605 and 630. Standard Features ■ Single acting doors. ■ Non-handed. ■ Slide track design. ■ Recommended for medium traffic, medium weight doors ■ Degree of opening fully adjustable and can be adapted to changing needs. ■ Heavy shock absorber spring provides 5º-7º compression before deadstop. ■ Multi-function slider for field selection of hold-open, friction stay or stop only. ■ Complete screw packet allows for installation in wood or metal door and frame. ■ Torx screws available but, heavy duty units should be considered for high security applications. ■ Standard architectural finishes. ■ Non-metal slide block and shock block. ■ 110º maximum opening. ■ To mount on pull side of door use angle bracket 5258. ■ ANSI No.: Friction—C05511 H.O.—C05531 Stop—C05541 ■ Available in a variety of sprayed, architectural and stainless steel finishes including 605, 630 and 652. Door Opening Chart (in inches) Door Opening Chart (in inches) Butts Offset Pivots *24-28 28-1/16-33 33-1/16-38 38-1/16-43 43-1/16-48 Center Hung Pivots 25-1/2-30 30-1/16-36 36-1/16-41 41-1/16-46 46-1/16-50 Model Number Friction H.O. Stop 9-116 9-126 9-136 9-216 9-226 9-236 9-316 9-326 9-336 9-416 9-426 9-436 9-516 9-526 9-536 Butts Offset Pivots 18-24 24-1/16-30 30-1/16-36 36-1/16-42 42-1/16-48 Center Hung Pivots 21-26-1/2 26-9/16-32 32-1/16-38 38-1/16-45 45-1/16-48 Model Number 10-146 10-246 10-346 10-446 10-546 *Butt hung only on this size door. 405 MA-150 Rixson 375-437 1/16/03 12:10 PM Page 32 RIXSON Overhead Holders Electro-Mechanical Hold Open 99 Series Surface mount – interior doors Standard Features ■ Single-action. ■ Non-handed. ■ Used with independent closers. ■ 85° - 110° hold open. ■ Push side or pull side. ■ Detectored or non-detectored. ■ 24VAC/24VDC (.090 Amps@24V) or 120 VAC (.018@120V). ■ For doors 32" - 54" wide. ■ Surface or concealed wiring. ■ UL listed door holder. ■ Available in a variety of sprayed finishes including 689. Models/ANSI Push Side Mount Pull Side Mount Push Side Mount Pull Side Mount 406 MODEL NUMBERS DETECTORED NON-DETECTORED 99-626 99-726 99-826 99-926 ANSI NUMBERS DETECTORED C00521 C00481 Toll Free: (800) 221-2052 http://www.mfsales.com ■ ■ NON-DETECTORED C00511 C00471 Phone: (718) 622-8785 ■ Fax: (718) 789-8346 e-mail: pilgrim@mfsales.com MA-150 Rixson 375-437 1/16/03 12:10 PM Page 33 RIXSON Overhead Holders During 1997, Rixson re-designed and improved the Checkmate® Series.The functions of some models were combined to offer greater flexibility and additional options. If you are replacing an old model, there may be some templating changes. Consult us if you have any questions concerning older Checkmate® holders and stops. Checkmate® Conversion Chart OLD MODEL NUMBER(S) 1-111, 1-113 1-211, 1-213 1-311, 1-313 1-411, 1-413 1-511, 1-513 1-211, 1-213 1-221, 1-223 1-321, 1-323 1-421, 1-423 1-521, 1-523 1-131, 1-133 1-231, 1-233 1-331, 1-333 1-431, 1-433 1-531, 1-533 3-111, 3-121, 3-131, 5-113, 5-123, 5-133 3-211, 3-221, 3-231, 5-213, 5-223, 5-233 3-311, 3-321, 3-331, 5-313, 5-323, 5-333 3-411, 3-421, 3-431, 5-413, 5-423, 5-433 3-511, 3-521, 3-531, 5-513, 5-523, 5-533 4-12 4-22 4-32 4-42 7-12 7-22 7-32 7-42 8-0211, 8-0221 NEW MODEL NUMBER 1-116 1-216 1-316 1-416 1-516 1-126 1-226 1-326 1-426 1-526 1-136 1-236 1-336 1-436 1-536 2-146 2-246 2-346 2-446 2-546 4-126 4-226 4-326 4-426 7-126 7-226 7-326 7-426 8-126 OLD MODEL NUMBER(S) NEW MODEL NUMBER 8-1211, 8-1221 8-2211, 8-2221 8-3211, 8-3221 8-4211, 8-4221 8-0311, 8-0321 8-1311, 8-1321 8-2311, 8-2321 8-3311, 8-3321 8-4311, 8-4321 9-111, 9-113 9-211, 9-213 9-311,9-313 9-411, 9-413 9-511, 9-513 9-121, 9-123 9-221, 9-223 9-321, 9-323 9-421, 9-423 9-521, 9-523 9-131, 9-133 9-231, 9-233 9-331, 9-333 9-431, 9-433 9-531, 9-533 33-111, 33-121, 33-131, 55-113, 55-123, 55-133 33-211, 33-221, 33-231, 55-213, 55-223, 55-233 33-311, 33-321, 33-331, 55-313, 55-323, 55-333 33-411, 33-421, 33-431, 55-413, 55-423, 55-433 33-511, 33-521, 33-531, 55-513, 55-523, 55-533 8-226 8-326 8-426 8-526 8-136 8-236 8-336 8-436 8-536 9-116 9-216 9-316 9-416 9-516 9-126 9-226 9-326 9-426 9-526 9-136 9-236 9-336 9-436 9-536 10-146 10-246 10-346 10-446 10-546 407
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Modify Date : 2003:01:17 15:35:09-05:00 Create Date : 2003:01:17 15:34:53-05:00 Title : MA-150 Rixson 375-437 Author : Linda Gilmartin Creator : QuarkXPress. 4.11: LaserWriter 8 8.7 Producer : Acrobat Distiller 5.00 for Macintosh Page Count : 8 Mod Date : 2003:01:17 15:35:09-05:00 Creation Date : 2003:01:17 15:34:53-05:00 Metadata Date : 2003:01:17 15:35:09-05:00EXIF Metadata provided by EXIF.tools