Locks 80 9369 0172 020 (01 09) Accessory Signage Instructions Inst
User Manual: Locks Accessory Signage instructions Mayflower Sales - Norton Door Controls
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
® 6900 PowerMatic Series Low Energy Power Operator Signage Instructions 80-9369-0172-020 (01-09) Signage Placement Instructions For PowerMatic Low Energy Power Operators Data here-in is from American National Standard for Low Energy Power Operated and Power Assisted doors, Standard A156.19. If further clarification is required, please refer to above noted Standard. Standard can be obtained though The Builders Hardware Manufactures Association (BHMA) at (212) 661-4261. Excerpts included with permission of BHMA. EASY OPEN DOOR PUSH TO OPERATE EASY OPEN DOOR PULL TO OPERATE AUTOMATIC ACTIVATE SWITCH TO OPERATE CAUTION PUSH TO OPERATE DOOR PULL TO OPERATE EASY OPEN DOOR POWER ASSISTED EASY OPEN DOOR ACTIVATE SWITCH THEN OPEN DOOR ANSI/BHMA A156.19-2002 Section 6.1 Doors shall be equipped with (a) sign(s) visible from either side, instructing the user as to the operation and function of the door. The signs shall be mounted 50” +/- 12” (1270mm +/- 305mm) from the floor to the centerline of the sign. The letters shall be 5/8” (16mm) high minimum. Signage Supplied with Operator Units 2 Signage Supplied with Switch Kits 3 Installation Location 4 80-9369-0172-020 (01-09) Power Door Operator Units are packaged with the following signs shown on this page. Sign Usage references American National Standard, A156.19 Section 6. EASY OPEN DOOR AUTOMATIC No: 425 (Qty 1) PUSH TO OPERATE Sign 425 Function: Power Assist Function Usage: Placed on Push Side of a door when door motion is used to initiate the operation of the door operator. Reference: 6.2.2 CAUTION DOOR No: 428 (Qty 2) Sign 428 Function: Power Assist / Power Operator Function Usage: All Low Energy doors shall be marked with a sign, visible from Both Sides of the door with the words “AUTOMATIC CAUTION DOOR”. Reference: 6.3 EASY OPEN DOOR No: 426 (Qty 1) PULL TO OPERATE Sign 426 Function: Power Assist Function Usage: Placed on Pull Side of a door when door motion is used to initiate the operation of the door operator. Reference: 6.2.2 PUSH PUSH TO TO OPERATE OPERATE No: 430 (Qty 1) Sign 430 Function: Power Operator Function Usage: Placed on Push Side of a door when door motion is used to initiate the operation of the door operator. Reference: 6.3.2 EASY OPEN DOOR No: 427 (Qty 2) POWER ASSISTED Sign 427 Function: Power Assist Function Usage: Placed on Both Sides of a door when remote sensor devices are used to initiate the operation of the door operator. Reference: 6.2.3 2 PULL TO OPERATE No: 431 (Qty 1) Sign 431 Function: Power Operator Function Usage: Placed on Pull Side of a door when door motion is used to initiate the operation of the door operator. Reference: 6.3.2 80-9369-0172-020 (12-02 ) Switch kits 574, 661, 662, 675, 685, 691, 692, 693, and 694 are packaged with the following sign. Sign Usage references American National Standard, A156.19 Section 6. EASY OPEN DOOR ACTIVATE SWITCH THEN OPEN DOOR No: 424 (Qty 1 Per Switch Kit) Sign 424 Function: Power Assist Function Usage: Placed on Both Sides of a door where a separate wall switch is used to initiate the operation of the door operator. Reference: 6.2.1 ACTIVATE SWITCH TO OPERATE No: 429 (Qty 1 Per Switch Kit) Sign 429 Function: Power Operator Function Usage: Placed on Both Sides of a door when a separate wall switch is used to initiate the operation of the door operator. Reference: 6.3.1 Switch kits 575, 576, 660, 672, and 676 are packaged with the following signs. Sign Usage references American National Standard, A156.19 Section 6. EASY OPEN DOOR ACTIVATE SWITCH THEN OPEN DOOR Sign 432 has the same usage as sign 424. This version is provided without the International Symbol of Accessibility to match wall switches which do not incorporate this symbol. No: 432 (Qty 1 Per Switch Kit) Sign 432 Function: Power Assist Function Usage: Placed on Both Sides of a door where a separate wall switch is used to initiate the operation of the door operator. Reference: 6.2.1 80-9369-0172-020 (12-02 ) ACTIVATE SWITCH TO OPERATE Sign 433 has the same usage as sign 429. This version is provided without the International Symbol of Accessibility to match wall switches which do not incorporate this symbol. No: 433 (Qty 1 Per Switch Kit) Sign 433 Function: Power Operator Function Usage: Placed on Both Sides of a door when a separate wall switch is used to initiate the operation of the door operator. Reference: 6.3.1 3 The following information is based on American National Standard A156.19 and also ADA Standard for Accessible Design. Some Specific Applications will not require all or any of this signage. Consult all Federal, State and Local Codes. PLACED ON BOTH SIDES OF DOOR PLACED ON BOTH SIDES OF DOOR ADJACENT TO LATCH EDGE OF DOOR WHERE THERE IS NO WALL SPACE TO THE LATCH EDGE OF DOOR, INCLUDING AT DOUBLE LEAF DOORS, SIGNS SHALL BE PLACED ON NEAREST ADJACENT WALL. SIGN 428 Function Signage SIGNAGE CENTER LINE BETWEEN 38” MIN. AND 62” MAX. (10CM - 15CM) ABOVE FINISHED FLOOR. ASSA ABLOY Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright © 2002, 2009 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 4 3000 Highway 74 East • Monroe, NC 28112 Tel: (877)-974-2255 • Fax: (800)-338-0965 www.nor tondoorcontrols.com 80-9369-0172-020 (01-09)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2009:01:26 13:10:35-05:00 Creator : AdobePS5.dll Version 5.0.1 Modify Date : 2013:12:18 11:07:53-05:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : AdobePS5.dll Version 5.0.1 Metadata Date : 2013:12:18 11:07:53-05:00 Format : application/pdf Title : 80-9369-0172-020 (01-09).cdr Document ID : uuid:ae068409-8798-449e-b36f-50d9ab63b165 Instance ID : uuid:1a8578ad-3ea5-461c-9389-3f1b79ceacb9 Page Count : 4EXIF Metadata provided by EXIF.tools