Lodar 111 111-4 User Manual TI Warranty Card Iss2

Lodar LTD 111-4 TI Warranty Card Iss2

Contents

User card

F.C.C. PART 15 INTENTIONAL RADIATOR MANUAL STATEMENTRADIO FREQUENCY INTERFERENCE STATEMENTThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.MODIFICATIONSChanges or modifications not expressly approved by Lodar Ltd. could void the users authority to operate the equipmentCONTACT INFORMATIONLodar Limited.60 Sandwell Street,Walsall, WS1 3EB. UKTel: +44 (0)1922 613633Fax: +44 (0)1922 626991email: sales@lodar.comwww.lodar.comAll Lodar products have a 5 year Warranty Years 1-2 are unlimited – years 3-5 have conditions from the date of purchase, as long as it is wired in accordance with our instructions, and that the equipment is fitted with an isolation system to shut off all power in event of an emergency.111-4.Warranty Card 2014We, Lodar Limited, 60 Sandwell St., Walsall. WS1 3EB. UK Declare under our sole responsibility that the product Make (Trade name of manufacturer) LODAR Type and general commercial description: Radio Remote Control System: Lodar TI SeriesModel 111-4; Variant 111-2Model 103-16; Variants 103-1; 103-2; 103-4; 103-6; 103-8; 103-10;103-12; 103-14 & 103-16. To which this declaration relates is in conformity with the essential requirements and other relevant requirements, and is compliant with the standards and/or other documents, of the following directives :EN 301 489-3R&TTE (1999/5/EC)Safety Low Voltage Directive 300.683 EN ISO 13849-1 2008 to Category 4. BS EN 60204-1EMC 2004/104/EEC ETSI 300-220 v1.1.1FCC Approval GrantedSpectrum 433.92 MHz F1D Please note that this certificate only covers Lodar and not the installationMartin Skidmore Position Date CEO October 2013
Lodar Limited Warranty for Lodar Products Valid WorldwideLimited Warranty. Lodar Ltd (“Seller”) warrants to the original buyer (“You”) all parts and components to be free of faults in materials workmanship for a period of two (2) years from provable date of purchase. Any Lodar product that is faulty will be repaired or replaced without charge to you, upon compliance with these procedures. The Warranties set forth herein are exclusive and in lieu of all other Warranties, whether oral or written, express or implied.Limited Warranty Performance ProcedureUpon discovery of a faulty Lodar product, you shall notify the Seller in writing, at his factory or at any authorised distributor, details of the said fault and mail, or otherwise ship the faulty Lodar product, postage or other carriage prepaid. Repairs or replacements by the Seller under this Limited Warranty will normally be accomplished within fifteen (15) working days after the receipt of the faulty Lodar product. The Seller, or its authorised distributor, may make reasonable charges for repairs that are not covered by this Limited Warranty Warranty and Remedy Limitations and ExclusionsThe following exclusions or limitations of Warranties and limitations of remedies shall be expressly applicable:Express Warranties. Seller warrants that the Lodar is as described in the “Lodar Owners Manual” provided herewith: no other express Warranty is made in respect to the Lodar. If any model or sample was shown to you, such model or sample was used for illustrative purposes only, and shall not be construed as a Warranty that the Lodar will conform to the sample or model. Implied Warranties. The implied Warranty of merchantability and all other implied Warranties shall only extend from the provable date of purchase for two(2) years. Some States within the USA do not allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you.Incidental and Consequential Damage. Subject to the Sellers Limited Warranty obligations set forth herein, the Seller shall not be responsible for incidental damages of any kind, or for consequential damages to property, loss of profits and loss of use which may be caused by any fault in, or malfunction, or failure of the enclosed Lodar. Some States within the USA do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.Condition of Warranty. The Seller shall not be required to comply with its Warranty duties provided herein if the fault, malfunction or failure of the Lodar was caused by damage (not resulting from faulty or malfunctioning components) or unreasonable use by you. Unreasonable use shall include, but not be limited to, the failure to provide reasonable and necessary maintenance or installation or use of the Lodar without compliance with the instructions contained in the Lodar Owners manual. Sellers liability under this Warranty or for any loss or damage to the Lodar product shall not exceed the cost of correcting the defects in or replacing the Lodar product, and upon expiration of the Warranty period, all such liability shall terminate. The agents, distributors and employees of the Seller are not authorised to make modifications to this Warranty, or additional Warranties binding on the Seller. Accordingly, additional statements, whether oral or written, do not constitute Warranties and should not be relied upon.Legal Remedies of the Buyer This limited Warranty gives you specific legal rights, and you may also have other legal rights, which may vary from State to State within the USA and from country to country. You also have implied Warranty rights. In the event of a problem with Limited Warranty service or performance, you may be able to go to a small claims court, a state court or a federal district court in the USA or to appropriate jurisdictions outside the USA.EnquiriesAny enquiries regarding compliance with Warranties provided herein may be addressed in writing to: Lodar Limited, 60 Sandwell Street, Walsall WS1 3EB, England. IC Radio Statement"Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.""This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.""Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante."“Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."

Navigation menu