82S6QC306CG C300 Software Install Notes
2015-07-30
: Logic C300 Software Install Notes C300_Software_Install_Notes s c300hd content
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
Solid State Logic S O U N D | | V I S I O N V2.0/16 Software Update and Install Notes Applicable to upgrades from V2.0/13 Packing List Please check that the V2.0/16 Software Upgrade Kit (706C30ZH or 706C30CH) contains the following items: 1 V2.0/16 Update Notes 1 C300 Software Disk (ZIP) or C300 Software Disk (CF) 1 Sealed Software Licence envelope which contains your Software Licence string (This document) P96030ZH P96030CH P96032CH If any of the listed elements are missing, please contact your local SSL representative before attempting the upgrade This document contains essential information – please read it carefully before making any attempt to upgrade the system 82S6QC306CH Solid State Logic S O U N D | | V I S I O N Begbroke, Oxford, England, OX5 1RU • +44 (0)1865 842300 320 West 46th Street, 2nd Floor, New York, NY 10036, USA • +1 (1) 212 315 1111 Suite 401, 5757 Wilshire Blvd, Los Angeles, CA 90036, USA • +1 (1) 323 549 9090 3-55-14 Sendagaya, Shibuya-Ku, Tokyo 151-0051, Japan • +81 (0)3 5474 1144 7 bis, rue de la Victoire, le Blanc Mesnil, Paris 93150, France • +33 (0)1 48 67 84 85 Via Timavo 34, 20124 Milano, Italy • +39 (0)39 2328 094 Visit SSL at URL: http://www.solid-state-logic.com © Solid State Logic All Rights reserved under International and Pan-American Copyright Conventions C100, C200, C300, Centuri, C-SB StageBox, Morse, NetBridge, NiTech, Solid State Logic and SSL are trademarks of Solid State Logic All other product names and trademarks are the property of their respective owners No part of this publication may be reproduced in any form or by any means, whether mechanical or electronic, without the written permission of Solid State Logic, Oxford, England As research and development is a continual process, Solid State Logic reserves the right to change the features and specifications described herein without notice or obligation E&OE V2.0/16 Software Update Introduction This document describes the fixes incorporated in V2.0/16 software, and details the software installation procedure required to update your system to this latest release of C300 software. Please note that this release is only applicable to those systems that have previously been installed with V2.0/13 software. If you have any questions about this release, please contact your local SSL office or distributor. Software Installation Please carry out the following steps carefully: 1. Check the contents of the Upgrade Kit against the packing list; if there are any omissions, please contact your local SSL office before proceeding further. 2. As with all software installation, we strongly advise you to generate a ‘mirror’ copy of the C300 System Disk onto Zip or Compact Flash disk before proceeding: Archiving the System Disk 1. Format a new Zip or Compact Flash disk using the Format function. 2. In the FILE menu, select Copy. 3. In the resulting pop-up, stab on the large grey box beneath Source, which will present a list of the contents of the System Disk at root level; if not, stab the box next to System on the left of the pop-up. 4. Stab on the Current Dir box, which will select everything visible on screen (the entire contents of the System Disk). Once done, you will be returned to the Copy pop-up, which should now list one source item, the name given to the System Disk. 5. Stab in the small grey box beneath Destination, and stab the box next to ZIP Disk/Mem Card on the left of the resulting pop-up. This should display the root-level contents of the Zip or Compact Flash disk which, if newly formatted (Step 1.), should display no content. 6. Stab on the Current Dir box, which will select the currently visible level of the Zip or Compact Flash disk. Now you will be returned to the Copy pop-up, which should list the volume name of the Zip or Compact Flash disk as the destination. 7. 3. Stab Start Copy at the foot of the Copy pop-up. When the copying process has been completed, stab on the yellow Copy box to quit the pop-up and dismount the disk. Remove the Zip or Compact Flash disk, label it and store safely. Read carefully the licence agreement that is printed on the label that seals the Software Licence envelope. When you break the seal on this envelope (see later) you will be bound by the conditions in this agreement. The agreement is also printed on the last page of this document. If you do not agree to the terms of the agreement then do not open the package, discontinue the installation process and contact your local SSL representative for advice. 17.12.08 1 C300 4. Install the new software using the System / Install facility: Installing new System Software 1. 2. Place the Software Release Disk in the processor’s Zip or Compact Flash disk. Via the System / Install menu, and at the prompts, respond accordingly: i. Stab on the Start box. ii When instructed Stab on device to install from, stab on the ZIP Disk/Mem Card box. iii When instructed Stab on device to copy to, stab on the System Disk box. 3. 5. 6. 7. 8. 2 iv When the screen indicates Install Completed, remove the disk from the drive, and then stab on Reboot (at the top right of the Install pop-up). Store the software disk in a safe place. When the system has booted, stab on the tablet with the pen and a pop-up will appear on screen inviting you to enable the software. Note that you will not be able to use the console until the Software Licence has been updated. Open the Software Licence envelope containing your licence string and type this carefully using the console’s keyboard. Once the system has verified the licence validity, the Software Licence Agreement will appear onscreen. Stab on the I Agree box at the top of the pop-up to complete the licensing procedure. Remember to store the Software Licence string in a safe place along with the software disk. 17.12.08 V2.0/16 Software Update New Features An new option, found in the Spanner/Machines/Transport menu, has been added to dictate the behaviour of the automation system post a rollback: • Wait for Rollback (default setting) The automation system will wait until mix data has been processed, post a rollback, before entering play. • Play during Rollback Allows the system to enter play immediately after rollback and before the processing of automation data has completed. Faders and objects will not playback data or enter write until the automation data has finished processing. Bug Fixes The following issues have been fixed in this version: • Ref 10795 • Ref 10792 • Ref 10789 • Ref 10787 • Ref 10780 • Ref 10776 • Ref 10683 • Ref 10682 • Ref 10662 • Ref 10631 • Ref 10465 • Ref 10422 • Ref 10406 • Ref 10404 • Ref 10270 17.12.08 Automation: The ALL key now works correctly when used with M and P whilst Preview is active on Auxes Automation: When cancelling Preview on a fader with Trim data written the Trim values are now played out Automation: A rollback point is no longer created on objects with Preview active Automation: Playing through a rollback point whilst in Preview no longer drops controls into write Automation: Preview now works after a rollback Automation: Fill to End now works correctly within Mix Limits Automation: Creating a DAW bay no longer locks out automation mode selection VCA Group solos now work in Solo In Place mode. Previously the monitoring flipped to the AFL bus when a solo key was pressed so no audio was heard EQ Display: As you increase the HMF frequency the display no longer reads incorrect values The stereo channel panning display now clears correctly when clear is actioned from a –100% width position Automation: When using Mix Limits, Merge Trim data is no longer lost from Mix End time onwards Solo in Place on Group Masters now works correctly The Mic Gain display now displays the full gain range Solo In Place: Soloing a Channel and then a Group Master now clears the channel OFF buttons when the Group Master is de-soloed Long IO names are now displayed correctly, in a smaller font 3 C300 Software Licence Agreement Solid State Logic (‘SSL’) is willing to license this C300 software and accompanying documentation for this product (the ‘Software’) to the customer (the entity that purchased the product and software) on the condition that you read and accept all of the terms in this agreement. Please read the terms below carefully. By continuing to install the software and using the enclosed information to license the software you acknowledge that you have read and understood the agreement and agree to be bound by its terms and conditions. If you do not agree to these terms then do not open this package, discontinue the installation process and contact your local SSL representative for advice. Licence SSL hereby grants you a non-exclusive licence to install and use the Software in machine-readable form on a single console. You may copy the software only for backup purposes, provided that you reproduce all copyright and other proprietary notices that are on the original copy of the Software. Restrictions SSL retains the right, title and interest in and to the Software, and any rights not granted to you herein are reserved by SSL. You may not reverse engineer, disassemble, decompile, or translate the Software, or otherwise attempt to derive the source code for the Software, except to the extent allowed under applicable law. If applicable law permits such activities, any information so discovered must be promptly disclosed to SSL and shall be deemed to be the confidential proprietary information of SSL. Any attempt to transfer any of the rights, duties or obligations hereunder is void. You may not rent, lease, loan or resell for profit the Software, or any part thereof. You may not reproduce, distribute or create derivative works of the Software. Limitation of Liability In no event will SSL or it’s suppliers be liable for profits or other consequential, incidental or special damages however arising, including negligence, in connection with the software or this agreement, even if SSL has been advised of the possibility of such damages. In no event will SSL’s liability in connection with the Software, regardless of the form of action, exceed £100. Indemnity You agree to defend and indemnify SSL against all claims, losses, liabilities, damages costs and expenses, including legal fees, which SSL may incur in connection with your breach of this Agreement. General The Software is a commercial item. This Agreement is governed and interpreted in accordance with the laws of the United Kingdom. 4 17.12.08
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 6 Subject : C300 V2.0/13 Software Update Creator : QuarkXPress(R) 7.5 Producer : QuarkXPress(R) 7.5 Create Date : 2008:12:17 10:58:55 Modify Date : 2008:12:17 10:58:55 Author : Solid State Logic Title : 82S6QC306CG X Press Private : %%DocumentCustomColors: (Blue).%%+ (Red).%%DocumentProcessColors: Cyan Magenta Yellow Black.%%RGBCustomColor: 0 0 1 (Blue).%%+ 1 0 0 (Red).%%EndCommentsEXIF Metadata provided by EXIF.tools