Logic Standard Nucleus Profile Setup And Quick Start Guide

2015-06-25

: Logic Logic-Standard-Nucleus-Profile-Setup-Quick-Start-Guide Logic-Standard-Nucleus-Profile-Setup-Quick-Start-Guide docs pdfs Nucleus content

Open the PDF directly: View PDF PDF.
Page Count: 12

Scroll down to view the document on your mobile browser.
www.solidstatelogic.com Support. This is SSL. Document Version 1.0 Logic Standard Nucleus Profile Setup and Quick Start Guide Introduction The first part of this tutorial details how to setup Logic with your SSL Nucleus. The second part details the commands assigned to this profile. This tutorial assumes that you have already installed all the necessary Nucleus related software on your computer and that there is both a working network and USB connection from your DAW computer to the Nucleus. If you have yet to configure this part of your system please refer to the Nucleus Owner’s Manual before continuing. Installing the profile The Logic Standard profile is automatically installed when you update your Nucleus console software to V1.6/1. In addition, it is recommended that you have the latest version of the Nucleus remote application installed. Go to the SSL website > Nucleus Product page > Downloads to make sure you are up-to-date.
www.solidstatelogic.com Support. This is SSL. Document Version 1.0 ipMIDI Setup Apple Macintosh OSX 1) Close all applications using MIDI 2) Open AudioMidi Setup (MacintoshHD > Applications > Utilities > Audio MIDI Setup) 3) Open the MIDI Window (Audio MIDI Setup > Window > Show MIDI Window) 4) Double click the ipMIDI icon 5) Set number of ports to 6 and ensure that ‘Loopback’ is not ticked and then press ‘Apply’ OR Microsoft Windows OS This setup information covers Windows XP, Vista and Windows 7 + 8 (32+64-bit) 1) Launch the ipMIDI Monitor application (Start > Menu > Programs > ipMIDI) 2) Ensure Ports 1 to 6 are not muted 3) Un-tick ‘Loop Back’ 4) Set ‘Ports after Reboot’ to 6 and ensure that ‘Loopback’ is not ticked and then press ‘OK’ Note: If you are opening up Ports for the first time, after Rebooting your computer, these will be ‘muted’. Be sure to open ipMIDI back up and untick the muted Ports

Navigation menu