LogicMark 5X711 3G mobile phone only call 911 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3508129
Application ID	B/JgvuBxpPrX3XBstlX2YA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	170.41kB (2130122 bits)
Date Submitted	2017-08-11 00:00:00
Date Available	2017-08-11 00:00:00
Creation Date	2017-07-18 17:21:22
Producing Software	Adobe Acrobat Pro 11.0.20
Document Lastmod	2017-08-11 13:47:13
Document Title	Users Manual
Document Creator	Adobe Acrobat Pro 11.0.20
Document Author:	Administrator

Attaching the Lanyard
Included in Kit
To Adjust Length
* 8$5',$1 
$ /(57 PLUS
User’s
QuickStart Guide
Model 30711B
Mobile Personal Emergency Response System
Charging Base
Pendant
Pendant Functions
Pendant Lanyard
Pendant Pendant
Wrist Strap Beltclip
USB Charger
Manufacturer’s Disclaimers and Limited Warranty
The Manufacturer’s warranty period is one year from time of purchase.
COMMUNICATION AND RESPONSE LIMITATIONS: Purchaser acknowledges that signals pass through
communication networks wholly beyond the control of the Manufacturer and are not maintained by the
Manufacturer, and, therefore, the Manufacturer shall not be responsible for any equipment or
communication failure which prevents transmission signals from reaching your contact list including
emergency 911 operators or damages arising therefrom. Purchaser acknowledges that the Manufacturer
provides no response to the System’s equipment. The Manufacturer shall not be responsible for
ambulance, police or other emergency response.
TESTING AND SERVICE OF THIS EQUIPMENT: The equipment, once installed, are in the exclusive
possession and control of the Purchaser, and it is Purchaser’s sole responsibility to test the operation of
equipment and request warranty service if the equipment is under warranty.
GREEN Power Light
Battery Charging:
Green Light is Blinking.
Fully charged:
Green Light is Solid.
Light is OFF when
removed from charging
base
Microphone
PURCHASER’S EXCLUSIVE REMEDY: Purchaser’s exclusive remedy for the Manufacturer’s default hereunder
is to require the Manufacturer to repair or replace, at the Manufacturer’s option, any equipment or part of the
personal emergency alert system which is non-operational during the Manufacturer’s warranty period.
LIMITATION OF LIABILITY: This equipment is not designed or guaranteed to prevent any loss or injury. This
Limited Warranty and Disclaimer of Liability
constitutes the terms of sale and use of the equipment, and if there should arise any liability on the part of
the Manufacturer as a result of any cause whatsoever, regardless of whether or not such loss, damage, or
personal injury was caused by or contributed to by the Manufacturer’s negligence to any degree or failure
to perform any obligation or strict products liability, such liability will be limited to an amount paid by the
Purchaser to the Manufacturer for the product, or to the sum of $350.00, whichever is greater.
For warranty information, contact Customer Service at LogicMark, LLC.
v 7.2 Model 30711B
FCC ID TYD5X711
Part# 30530
RED Charging Light
Low Battery Warning:
Flashes when battery is at less than
25% capacity
BLUE Call In Process Light
Solid when connected to a
cellular
network
Emergency
Eme
Em
Button
TEST
Button
Speaker
1
Before First Use:
Fully charge pendant prior to use by putting it in the charging
cradle. (Make sure the Charger is plugged in and the Power light
h is
Red.) It may take 3 to 4 hours to ensure a full charge. The Charging
Light on the pendant will blink Green when charging and turn solid
Green when fully charged. SEE ILLUSTRATION BELOW.
911
Plug Base into power and
charge pendant
UA
AR
RD
RDI
DIA
DI
IIA
AN
LE
LER
ER
ERT
RT
RED Light
Low battery Warning
Placing an Emergency Call
1. User Pushes the BLUE EMERGENCY button for 1 second:
a. Blue Light flashes and short musical chime is heard
b. Pendant calls 911
2. User talks to the 911operator using the speakerphone in the pendant
a. Immediately give the 911 operator your name and location
ocation
3. Call can be ended one of two ways:
a. Pendant detects 911 has hung up, automatically ends the call, and the Pendant returns to standby
b. User pushes the TEST button on the pendant to end the call and hang up
4. Pendant announces “Hanging Up” and returns to Standby
Battery Supervision
The Battery Supervision feature allows the
GuardianAlert 911 Plus to automatically check the
status of its battery every 24 hours.
BLUE Light
Call in Process
System Check
htt
GREEN Light
Press the TEST button for 4 seconds.
Battery Charging
1. User pushes the TEST button for 4 seconds
2. Pendant announces “Power ON,” Pendant turns on
3. Pendant announces Version number
4. Pendant checks battery status and announces:
a. “Battery OK” if Battery greater than 25%“
Test
b. “Recharge Battery Soon” if battery less than 25%
Button
5. Pendant then checks for cellular service and announces:
a. “Service Coverage OK” – Good Cellular service coverage
b. “No Service Coverage” – No Cellular service or Low Cellular Signal
(Contact Customer Service if you hear this announcement.)
6. Pendant announces whether Battery Supervision feature is “On” or “Off”
7. Pendant announces “Power OFF”, which returns the pendant to a lowpower STANDBY mode.
If Battery Supervision is turned ON:
1. Estimated standby time between charges will be 2-3 months
2. It will check the status of the battery every day at the same
time, beginning 24 hours after the feature is turned ON
3. When the battery reaches 25% capacity or less, the pendant
will announce “Recharge battery soon”. The announcement
will be made daily until the pendant is recharged
If Battery Supervision is turned OFF:
1. Estimated standby time between charges will be 6-12 months
2. The user will have to manually perform a System Check
periodically to check the status of the battery
Emergency
Call Button
Turning Battery Supervision ON or OFF:
1. Perform a System Check – Push and HOLD the Gray TEST
button for 4 seconds
2. When you hear “Version Number” – Push and HOLD the
Gray TEST button again for 4 seconds. The Blue Light will blink
twice
3. The System Check voice prompt will then confirm the Battery
Supervision status – either Battery Supervision ON or Battery
Supervision OFF
Simply repeat steps 1-3 to toggle the Battery Supervision feature
ON or OFF
Charger Input
Troubleshooting
If you are having problems using your pendant,
please call:
1-866-541-VETS (8387)
Note: If you place a call to 911 accidently or to test, it is IMPORTANT that you stay on the phone and tell them you were testing your phone’s 911 feature.
Things The FCC would like for you to know:
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that harmful interference to radio or television reception can be
avoided. The user is encouraged to try to correct the interference by one
or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement:
Your cellular/mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the emission limits for exposure
to radiofrequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
These limits are part of
comprehensive guidelines of the U.S. Government. These limits are part
of and establish comprehensive guidelines of the U.S. Government. These
limits are part of and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed
by independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age
and health. The exposure standard for cellular/mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are conducted with
cellular/mobile phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of cellular/mobile phone while
operating can be well below the maximum value. This is because cellular/
mobile phones are designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power output.
Before a cellular/mobile phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed the limit
established by the government adopted requirement for safe exposure.
The tests are performed in positions and locations (e.g., at the ear and and
worn on the body) as required by the FCC for each model. The highest
SAR value for this model 3G cellular/mobile phone when tested for use
at the body is 1.43 W/Kg and when worn on the body, as described in
this user guide, is 1.43 W/Kg. (Body-worn measurements differ among
cellular/mobile phone models, depending upon available accessories and
FCC requirements.) While there may be differences between the SAR
levels of various cellular/mobile phones and at various positions, they
all meet the government requirement for safe exposure. The FCC has
granted an Equipment authorization for this model. Tablet interference
will not occur in a particular installation. If this equipment does cause PC
with all reported SAR levels, evaluate as in compliance with the FCC RF
exposure guidelines. SAR information on this cellular/mobile phone is
on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid.
FCC ID: TYD5X711 Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.ctia.org/. *In the United States
and Canada, the SAR limit for Tablet PC used by the public is 1.6watts/kg
(W/kg) averaged over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for the public
and to account for any variations in measurements.
Body-worn Operation:
This device was tested for typical body-worn operations. To comply with
RF exposure requirements, a minimum separation distance of 10mm must
be maintained between the user’s body and the handset, including the
antenna. Third-party belt-clips, holsters, and similar accessories used
by this device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided. Use only the supplied
accessories.
GUARDIAN911
ALERTPLUS
FCC ID TYD5X711
v7.2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:07:18 17:21:22+08:00
Modify Date                     : 2017:08:11 13:47:13+08:00
Title                           : 
Trapped                         : False
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Metadata Date                   : 2017:08:11 13:47:13+08:00
Creator Tool                    : Adobe Acrobat Pro 11.0.20
Format                          : application/pdf
Creator                         : Administrator
Document ID                     : uuid:40521372-af56-4dfd-a522-55982605468e
Instance ID                     : uuid:29de2eca-fdbb-4231-82bb-e1019b26be8f
Producer                        : Adobe Acrobat Pro 11.0.20
Page Count                      : 4
For                             : Xiu,
Bounding Box                    : 24 33 372 578
Container Version               : 9
Creator Version                 : 13
Image Height                    : 545
Image Width                     : 348
Image Size                      : 348x545
Megapixels                      : 0.190

EXIF Metadata provided by EXIF.tools