Long Range Solutions PRONTO PRONTO User Manual

Long Range Systems Inc PRONTO Layout 1

a href="https://usermanual.wiki/Long-Range-Solutions" itemprop="url"> Long Range Solutions >

User Manual

Each button on the one or six button PRONTO can be programmed to send a unique messageto separate pagers or group of pagers. Both the six-button and one-button models can alsosend a specific message for an external switch or sensor.  InstallationTo put the PRONTO in operation:Note: If your Pronto is not already programmed, refer to the programming guide first.1. Install the 2-batteries in the Pronto (note the positive and negative end)2. Locate and install the mounting bracket where it is to be used. (use screws, strapsor velcro)3. Position the unit into the  notches  in the mounting bracket and press until latch engages.4. Turn on the pager (refer to the pager booklet).5. Press the button(s) on the PRONTO to test that the pager is receiving the messages.Normal Operation1.  Press a button the pager will receive the message.Optional Power SupplyThe PRONTO may also be powered by an optional external power supply. Please contact LongRange Systems for more information. WARNING: Connection of an incorrect power supply willvoid the warranty.Long Range Systems 1PRONTO Quick GuidePRONTO™Six and One Button Paging SystemQUICK SETUP & OPERATION
Programming Your Pronto1. Locate the 4-pin connector. 2. Connect the USB probe with special 4-pin connectors.3. Plug into the PRONTO with 4-hole location.4. Connect the USB plug to the PC.5. Execute the PC program named “LRS Programmer”.6. Click “New Table” to edit the messages associated with each button.Long Range Systems 2PRONTO Quick Guide
Download:
Mirror Download [FCC.gov]
Document ID1636355
Application ID2J3GD68W11IIE9GFmkOOZQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize49.6kB (619956 bits)
Date Submitted2012-02-13 00:00:00
Date Available2012-02-13 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareQuarkXPress(R) 8.5
Document Lastmod0000-00-00 00:00:00
Document TitleLayout 1
Document CreatorQuarkXPress(R) 8.5
FCC ID Filing: M74PRONTO

Navigation menu