Long Range Solutions TX-ZNODE TX-Znode Zigbee Repeater User Manual Layout 1

Download:
Mirror Download [FCC.gov]
Document ID	2215051
Application ID	pcPYGvhD+Q1+7qt6qVS7kg==
Document Description	USRMANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.04kB (62972 bits)
Date Submitted	2014-03-14 00:00:00
Date Available	2014-03-14 00:00:00
Creation Date	2014-03-04 09:09:55
Producing Software	QuarkXPress(R) 8.5
Document Lastmod	2014-03-04 13:42:02
Document Title	Layout 1
Document Creator	QuarkXPress(R) 8.5

Znode
USER INSTRUCTIONS
Description:
The Znode is designed to received signals from
LRS 2.4 GHz devices and “retransmit” them.
ZnoDe specifications
• Required voltage: 110/120V outlet with
5Vdc power supply.
• Operating Frequency:
2.4GHz to 2.475GHz
• Transmit Power: 100 mw
• Transmit Range: 300’
incluDeD items:
• Znode
• 5VDC Power Supply
• 2.4 GHz Antenna
connecting the antenna:
The antenna should be placed on the SMA connector on the Znode and tightened into
place (see picture)
positioning anD installing the ZnoDe:
notes:
• Metal surfaces and thick walls will reduce the signal strength.
The Znode operates at its best when installed at the “fringe” of your area. This means
you should get it as far from the T750x transmitter or WIN application as possible but
still be able to communicate with the T750x or WIN application.
1. Set T750X or WIN application into Associate Mode.
2. Connect the 5VDC power supply into the Znode.
Long Range Systems
Znode User Instructions
3. Press the button on the side of the Znode once.
4. The LED will begin to flash. The green LEDs will flash to show that the Znode connected to the T750X or WIN application.
5. The green LED will flash once every 5 seconds to show it is connected.
note: if the Znode does not connect, repeat the process.
to re-associate a Znode:
1. Press and hold the button on the side of the Znode for 5 seconds.
2. The LED will now be RED.
3. Put the T750x or WIN application into Associate mode.
4. Press the button on the side of the Znode once.
troubleshooting:
My LED is displaying RED all the time?
The Znode is currently waiting to be associated to a T750x or WIN application. Make
sure the T750x or WIN application is in Associate Mode, then press the button on the
side of the Znode once.
customer support
Should you have any questions, please contact us:
LRS Customer Service Department
800.437.4996 or 214.553.5308
LRS Australia
+61 (02) 995 5700
www.lrsaustralia.com.au
LRS Brazil
5511 41528416
www.lrspager.com.br
LRS Canada
877.607.7243
www.lrscanada.ca
LRS Colombia
(+57) 1 - 7592452
www.lrscolombia.com
LRS Europe GmbH
+49 531 310542 0
www.lrs.eu.com
LRS Middle East Ltd
+9613 81 82 84
www.lrs-lb.com
LRS South Africa
+27 21 422 4975
www.lrssa.com
LRS United Kingdom
+44(0)1782 537000
www.lrspagers.co.uk
WARRANTY
Any rechargeable pager left off charge for more than 30 days is not covered under the
standard warranty.
FCC ID: M74TX-ZNODE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
Long Range Systems
Znode User Instructions
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This device is designed to operate and should be placed in an area with a minimum separation distance to nearby persons of at least 20 Centimeters.
Any modifications to the unit, unless expressly approved by Long Range Systems LLC
could void the user's authority to operate the equipment.
Long Range Systems, LLC
4550 Excel Parkway, Suite 200, Addison, TX 75001
www.pager.net • 214.553.5308
030414
Long Range Systems
Znode User Instructions

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2014:03:04 09:09:55-06:00
Creator                         : QuarkXPress(R) 8.5
Modify Date                     : 2014:03:04 13:42:02-06:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : QuarkXPress(R) 8.5
Metadata Date                   : 2014:03:04 13:42:02-06:00
Producer                        : QuarkXPress(R) 8.5
Format                          : application/pdf
Title                           : Layout 1
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Document ID                     : uuid:a8fee08b-5c86-2d4d-962b-d9bdf14fa0ee
Instance ID                     : uuid:68df01c4-189e-4ca7-811f-02700b4c351a
Page Count                      : 3

EXIF Metadata provided by EXIF.tools