Loopcomm Technology LP-8617N Compact 802.11 B/G/N Wireless USB Dongle (1T1R) User Manual Manual

Loopcomm Technology,.Inc. Compact 802.11 B/G/N Wireless USB Dongle (1T1R) Manual

Manual

 Quick Installation Guide Model: LP-8617N  NOTE: Do not insert the USB adapter until the software/driver has been installed. High Power Wireless-150N Compact USB Adapter  Insert the Setup CD                 Install Software    The menu page should appear.    Select the instruction for your operating system and     install the driver for the USB   adapter.         Follow the Instructions for Driver Installation A. From the Menu page, select Driver Installation  B. Start the Driver Installation     If the Menu page does not appear, browse the     if prompted, click Next to begin the installation CD drive and double-click the autorun.exe file  C. Continue the Driver Installation    D. Restart your Computer      Follow the instructions that appear for installation       A prompt will appear asking you to restart your          computer. Select Yes and click Finish to restart.  E. Insert the High Power USB Adapter  After the computer has fully rebooted, locate a USB port and insert the USB Adapter. Windows should automatically begin to install the driver for using the USB Adapter.
 Quick Installation Guide Model: LP-8617N  Windows 7  1. Connect to a Wireless Network    2. Connect to a Wireless Network      Locate the Wireless Icon in the Windows           If the network you are trying to connect to has System tray (bottom right corner) and click it to    security enabled you will need to enter it here. view available wireless Networks. Highlight your     desired network and click Connect.   Windows 8.1 1. Connect to a Wireless Network    2. Connect to a Wireless Network              Click it to view available wireless Networks.    Enter the Security Key then click “Next ”.  Select the Wireless Network and tick mark the     button to connect automatically &  press “Connect”.   3. The Wi-Fi Network is connected successfully.
QuickInstallationGuideModel:LP‐8617NREGULATORYINFORMATIONFederalCommunicationCommissionInterferenceStatementThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:•Reorientorrelocatethereceivingantenna.•Increasetheseparationbetweentheequipmentandreceiver.•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.FCCCaution:ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.RFRadiationExposureandHazardStatement:ToensurecompliancewithFCCRFexposurerequirements,thisdevicemustbeinstalledinalocationsuchthattheantennaofthedevicewillbegreaterthan0.25mawayfromallpersons.UsinghighergainantennasandtypesofantennasnotcoveredundertheFCCcertificationofthisproductisnotallowed.Installersoftheradioandendusersoftheproductmustadheretotheinstallationinstructionsprovidedinthismanual.Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.SARwarningstatementThisEUTiscompliancewithSARforgeneralpopulation/uncontrolledexposurelimitsinANSI/IEEEC95.1‐1999andhadbeentestedinaccordancewiththemeasurementmethods.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance5mmbetweentheradiator&yourbody.Non‐modificationStatement:Useonlytheintegralantennasuppliedbythemanufacturerwhenoperatingthisdevice.Unauthorizedantennas,modifications,orattachmentscoulddamagetheTINavigatoraccesspointandviolateFCCregulations.Anychangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatethisequipment.Copyright©2015LoopcommTe chn ology Inc.Allrightsreserved.

Navigation menu