Lorex Technology LWB6801-W 1080p USB WIRE-FREE RECEIVER G2 User Manual
Lorex Technology Inc. 1080p USB WIRE-FREE RECEIVER G2 Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3985931 |
| Application ID | sBZbhxGDpgkg2jQJJzMVPg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 173.57kB (2169588 bits) |
| Date Submitted | 2018-08-31 00:00:00 |
| Date Available | 2018-08-31 00:00:00 |
| Creation Date | 2018-08-20 17:18:25 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2018-08-20 17:18:25 |
| Document Title | Users Manual |
| Document Creator | Adobe Illustrator CS6 (Windows) |
Lorex Cirrus: Playback Play back recorded video using the Lorex Cirrus app. To play back recorded video: 1. Launch the Lorex Cirrus app. 2. Tap 3. Set search options for playback: , then tap Playback . a. Tap a recorder to reveal available channels. b. Tap channels to include in search. c. Tap a date from the calendar to seach for recordings from. Dates with recordings available are marked with a red dot. HD Wire-Free Security System G2 GUIDE NOTE: Tap to lter recordings by type and resolution. 2/2 4. Tap Play to begin playback. Playback Controls: Quick Reference Guide LHB926 Series English Version 1.0 www.lorex.com Before You Start ·Upgrade your recorder versions. You can use playback mode in portrait or landscape mode. Landscape mode shown below: Playback time Playback date Video timeline. Tap to start playback from the selected time. Pinch or spread ngers to change the time period. Video playback rmware and mobile app to the latest ·Please note that an upload speed of 3.5Mbps is required for remote video streaming. Up to 3 devices may connect to the system at the same time. ·Ensure you have completed initial setup of the Lorex Cirrus app and the recorder as detailed in the Quick Connection Guide. Lorex Cirrus: App Overview Slower Play / Pause Faster Next Frame Stop Snapshot Manual Mute / Unmute Recording Lorex Cirrus: Camera Settings Con gure settings for selected channel Main menu Select channels for live viewing from all connected devices Battery strength indicator Channel name Date and time stamp Wireless signal strength indicator Change camera settings using the Lorex Cirrus app. To change camera settings: 1. 2. 3. 4. Tap to start live view Launch the Lorex Cirrus app. Tap a channel in Live View to select it. to open settings for the selected Tap channel. Con gure the following as needed: a. Channel Name: Enter a name of your choice for the channel (e.g., Porch Camera). b. Record Length: Set the recording length when motion is detected. c. Video Resolution: Set 720p or 1080p recording. d. Motion Settings: Con gure motion detection settings. See the “Optimizing Motion Detection” section in theQuick Connection Guide for details. e. Recording Schedule: Con gure the recording schedule for the selected camera by day. Tap Day to select the day of the week. Tap squares on the timeline to enable motion recording during speci ed times (yellow for enabled, white for disabled). TapSave when nished. Split-screen options Tap to enable the camera’s intercom; tap again to stop Save a snapshot of the current live view Tap to start manual recording; tap again to stop Tap to switch between muted and unmuted Tap to switch to full HD video quality; tap again for reduced video quality that is optimized for streaming 5. Tap SAVE to save settings. Lorex Cirrus: Device Settings Change recorder name and format storage using the Lorex Cirrus app. To change device settings: 1. 2. 3. 4. Launch the Lorex Cirrus app. Tap a channel on the device you want to edit from Live View. , then tap Settings . Tap Con gure the following as needed: a. Device Name: Enter a name of your choice for the recorder (e.g., Wire-Free System). b. Format: Tap to select a storage device (hard drive or microSD card) to format. Tap Format to con rm the selected device and begin formatting. IMPORTANT: Formatting a storage device will erase all recordings and snapshots. This step cannot be undone. NOTE: Only the admin user can format memory. 5. Tap Save to save settings. LHB926_QRG_EN_R1 LHB926_QRG_EN_R1.indd 1 6/6/2018 4:09:20 PM Recorder: Full Setup Recorder: Quick Menu The recorder setup detailed in the Quick Connection Guide is a simpli ed setup. In order to access features using the recorder, you must complete the full setup detailed below. To set up the recorder: Right-click anywhere on the live viewing screen to open the Quick Menu. Open the Main Menu. 1. Connect the wireless receiver to the USB port on the back panel of the recorder. Select camera / live display view. Search for and play back recordings. NOTE: The receiver includes double-sided tape and mounting screws for optional wall mounting for improved line-of-sight with cameras. Back up video recordings or snapshots to a USB ash drive (not included). Recorder: Using the Mouse 2. Connect the recorder to your router using the included Ethernet cable. 1. LEFT-CLICK: · During split-screen display mode: Double-click an individual channel to view it in full-screen. Double-click again to return to the split-screen display mode. · While navigating menus: Click to open a menu option. 2. RIGHT-CLICK: 3. Connect the included mouse to the USB port on the front panel of the recorder. · During live view: Right-click anywhere on the screen to open the Quick Menu. · While navigating menus: Right-click to exit menus. 3. SCROLL WHEEL: · While navigating menus: Scroll to move up / down through the menu content. 4. Connect a monitor (not included) to the HDMI or VGA port of the recorder (HDMI cable included; VGA cable not included). HDMI OR NOTE: In live view, hover the mouse cursor over the top of the screen to open the Navigation Bar. Move the mouse cursor away from the top of the screen to close the Navigation Bar. VGA* Recorder: Search and Playback Search for and play back video recordings on the recorder. To play back recorded video: 5. Connect the included power adapter to the recorder. Wait a few minutes for the system to start up. Recorder: Initial Setup Wizard For users who wish to use the recorder interface rather than connecting to the system using the Lorex Cirrus app, you will have to complete the recorder Setup Wizard to con rm the correct date and time for the system. NOTE: If you did not use the Lorex Cirrus app for initial setup, you will be prompted to enter the default username (admin) and password ( 00000000 ), and then create a new password for the recorder. To complete the setup wizard: 1. Log in using the system user name (default: admin) and your new, secure password you recorded on the Quick Connection Guide. 1. From live view, right-click and then click Playback . 2. Log in using the system user name (default: admin) and your new, secure password you recorded on the Quick Connection Guide. 3. Use the calendar on the left-side of the screen to select the date to playback. 4. Check off the channels you would like to search for recordings from on the leftside of the screen. 5. Click 6. Search results appear as thumbnails. Double-click any recording to begin video playback. to search for recordings. Select the day to playback Double-click any event to begin playback Select channels to playback Click to search for recordings 2. The Setup Wizard launches. Click Next to begin. Recorder: Backup Back up video recordings to a USB To back up recorded video: 1. 3. 4. 5. Click the arrow keys to select a language for the on-screen display. Click Next to con rm. From live view, right-click and then click Backup. 3. Log in using the system user name (default: admin) and your new, secure password you recorded on the Quick Connection Guide. 4. Con gure the following: a. Date: Enter the date to search for recordings from. c. Channel / Type: Select the channel and recording type to search for, or select All to browse all channels and recording types. d. Search / Quick Backup: Click Search to show all recordings that t your search criteria, or click Quick Backup to back up all recordings that t the search criteria. Select the correct time zone from the dropdown. Review the information you have set for the recorder. Click Accept to con rm. b. Time: Enter a start and end time for your search. Click to select the correct date from the calendar. 6. ash drives prior to using them with your 2. Enter the date and time: Click Next to con rm. Insert a USB ash drive (not included) into one of the USB ports marked Mouse / Backup on the back of the recorder. NOTE: It is recommended to format USB wire-free system. Click the arrow keys to select your region. Click Next to con rm. Select a time format from the dropdown. For12Hour format, select either AM or PM from the second dropdown. ash drive (not included). e. (Not applicable for Quick Backup) Recordings that t the search are shown on screen. Check recordings you want to back up, then click Backup. 5. The Backup Type screen appears. Select a click Save. 6. The USB ash drive contents are shown on screen. Navigate to the location you want to save the backup les in, then click OK to begin the back up. Progress is shown on screen. NOTE: Do not disconnect the USB letype for your backup les, then ash drive until the backup is complete. LHB926_QRG_EN_R1 LHB926_QRG_EN_R1.indd 2 6/6/2018 4:09:29 PM Caution FCC Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC& IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre l’antenne et votre corps. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur. LHB926_QRG_EN_R1 LHB926_QRG_EN_R1.indd 3 6/6/2018 4:09:29 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : 说明书修改 Metadata Date : 2018:08:20 17:18:25+08:00 Modify Date : 2018:08:20 17:18:25+08:00 Create Date : 2018:08:20 17:18:25+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 116 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14457 bytes, use -b option to extract) Instance ID : uuid:a941ab17-bc4e-43e4-baf0-ecc4069eccf2 Document ID : xmp.did:86EE14F259A4E8119E46833048F9334D Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:ddb87d92-ea0c-4d3b-b92c-6a8c8e6efce6 Derived From Document ID : xmp.did:CC9F6A7653A4E811A801D5F79F5730A7 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:CC9F6A7653A4E811A801D5F79F5730A7, xmp.iid:86EE14F259A4E8119E46833048F9334D History When : 2018:08:20 16:31:41+08:00, 2018:08:20 17:18:05+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 29.426593 Max Page Size H : 44.661667 Max Page Size Unit : Centimeters Font Name : ArialMT, Arial-BoldMT, AdobeSongStd-Light, Helvetica, Industry-Black, Industry-Bold, Industry-Book, Industry-BookItalic, Industry-Demi, Industry-MediumItalic Font Family : Arial, Arial, Adobe 宋体 Std, Helvetica GBpc-EUC-H, Industry Black-GBpc-EUC-H, Industry Bold-GBpc-EUC-H, Industry Book-GBpc-EUC-H, Industry BookItalic-GBpc-EUC-H, Industry Demi-GBpc-EUC-H, Industry MediumItalic-GBpc-EUC-H Font Face : Regular, Bold, L, GBpc-EUC-H, Black-GBpc-EUC-H, Bold-GBpc-EUC-H, Book-GBpc-EUC-H, BookItalic-GBpc-EUC-H, Demi-GBpc-EUC-H, MediumItalic-GBpc-EUC-H Font Type : Open Type, Open Type, Open Type, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown Font Version : Version 3.00, Version 3.00, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False, False, False, False Font File Name : arial_0.ttf, arialbd_0.ttf, AdobeSongStd-Light.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf, AdobeHeitiStd-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 669 C Swatch Group Name : 默认色板组, 灰色, 明亮 Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 669 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999999, 50.000000, 75.000000, 84.999996, 90.000004, 75.000000, 80.000001, 69.999999, 84.999996, 100.000000, 100.000000, 75.000000, 50.000000, 35.000002, 10.000002, 0.000000, 25.000000, 39.999998, 50.000000, 55.000001, 25.000000, 30.000001, 35.000002, 39.999998, 39.999998, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 84.999996, 100.000000, 60.000002 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000004, 80.000001, 50.000000, 35.000002, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 10.000002, 14.999998, 50.000000, 94.999999, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 25.000000, 44.999999, 50.000000, 60.000002, 39.999998, 50.000000, 60.000002, 64.999998, 69.999999, 69.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000002, 10.000002, 90.000004, 90.000004 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000004, 84.999996, 94.999999, 100.000000, 84.999996, 90.000004, 100.000000, 100.000000, 100.000000, 100.000000, 94.999999, 75.000000, 44.999999, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000002, 50.000000, 19.999999, 39.999998, 50.000000, 60.000002, 64.999998, 64.999998, 75.000000, 80.000001, 90.000004, 100.000000, 80.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 94.999999, 100.000000, 0.000000, 0.003099 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999998, 0.000000, 10.000002, 25.000000, 35.000002, 50.000000, 69.999999, 100.000000, 89.999402, 79.998797, 69.999701, 59.999102, 50.000000, 39.999402, 29.998803, 19.999701, 9.999102, 4.998803, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003099 Swatch Colorant Tint : 100.000000 Swatch Colorant L : 21.568600 Swatch Colorant A : 17 Swatch Colorant B : -23 Producer : Adobe PDF library 10.01 Page Count : 3 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools