LucidSound 06302 2.4G Wireless HEADSET User Manual
LucidSound, Inc. 2.4G Wireless HEADSET Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2896819 |
| Application ID | ZU52TjVSXzC8f/BTRYPY/A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 32.5kB (406198 bits) |
| Date Submitted | 2016-02-04 00:00:00 |
| Date Available | 2016-02-04 00:00:00 |
| Creation Date | 2015-12-15 11:49:48 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2016-02-03 09:47:30 |
| Document Title | Users Manual |
| Document Creator | Adobe Illustrator CS6 (Windows) |
198mm 1. Go into Settings > Sound and Screen > Audio Output Settings > Primary Output Port and select ‘Digital Out (Optical)’ 2. Connect one end of the Xbox One chat cable to the 3.5mm port on the headset and the other end to the 3.5mm port on the Controller. 2. Make sure that only ‘Linear PCM 44.1kHz and ‘Linear PCM 48kHz’ are checked. 4. Select ‘Volume’ and set ‘Headset volume’ to maximum and ‘Mic monitoring’ to minimum. Make sure that ‘Headset mic’ is turned to ‘On.’ 5. Select ‘Chat Mixer’ and set ‘Headset chat mixer’ all the way to the right for 100% chat. 3. Go into Settings > Audio Output Settings > Audio Format (Priority) and select ‘Linear PCM.’ 4. Go into Settings > Devices > Audio Devices and set both the ‘Input Device’ and ‘Output Device’ to ‘USB Headset(Lucid Sound LS30) Microphone Mute Rising tone = muted Falling tone = unmuted LED on boom mic illuminates when muted. 5. Set the Output to Headphone to ‘Chat Audio’ 6. Set the ‘Volume Control (Headphones)’ to maximum Chat Volume Connect the small end (micro-USB) of the charging cable to the headset. Connect the other end to a USB port. The LED on the headset will pulse while charging and turn solid when charging is complete. 7. On the Xbox One, go into All settings > Display & sound. Under ‘Audio Output’ select ‘Optical audio’ and choose ‘Stereo uncompressed.’ 2. Make sure that only ‘Linear PCM 2 CH. 44.1kHz’ and ‘Linear PCM 2 CH. 48kHz’ are checked. Power/Pairing button Press and hold for 7 seconds to enter pairing mode 3. Go into Settings > Accessory Settings > Audio Device Settings and set the ‘Input Device’ and ‘Output Device’ to ‘Lucid Sound LS30’ Mobile/Xbox Input 3 Adjust the game/chat balance on the Stereo Headset Adapter to 100% chat and increase the volume on the adapter to maximum. 4. On the Xbox One, go into All settings > Display & sound. Under ‘Audio output’ select ‘Optical audio’ and choose ‘Stereo uncompressed.’ Power LED Solid = ON/Connected Slow Blink = Searching Fast Blink = Battery Low Blink twice then pause = Pairing 5V 5V 2. Connect one end of the Xbox One chat cable to the 3.5mm port on the headset and the other end to the 3.5mm port on the Stereo Headset Adapter. 1. Go into Settings > Sound Settings > Audio Output Settings > Optical Digital. The LS30 includes an optional boom microphone. When this microphone is removed, an internal microphone is activated. To connect the boom Microphone, simply insert it into the port on the bottom of the headset. USB Charging Port IN IN Using Stereo Headset Adapter 1. If the Xbox One Controller does not have a 3.5mm port, an Xbox One Stereo Headset adapter is required (not included). EQ 198mm Game Mute Rising tone = muted Falling tone = unmuted Game Volume 6. If it appears, set ‘Headset chat mixer’ all the way to the right for 100% chat. 5V 3. On the Xbox One, go into All settings > Kinect & devices > Devices & accessories and choose the Xbox One Wireless Controller in use. When battery has less than 15% power remaining, unit beeps twice every 10 seconds. IN Controller with 3.5mm port 1. Always turn on the headset before turning on the controller. 展开尺寸198mm x 396mm (198 x 2) Microphone Port EQ Preset Select 1 beep for Normal 2 beeps for Bass Boost 3 beeps for Treble Boost 1. Connect one end of the mobile cable to the 3.5mm input on the headset and the other end to the 3.5mm output on the mobile device. 2. The headset will only work in passive (OFF) mode. (note that the volume, EQ, and mute features will not function) 1. Connect one end of the Xbox 360 chat cable to the 3.5mm port on the headset and the other end into the 2.5mm port on the Controller. 2. Go into Settings > System > Console Settings > Audio and select ‘Digital Stereo’ Pairing Button Press and hold for 2 seconds to enter pairing mode Lucid Sound, Inc. warrants this product to be free from defects in materials and workmanship for the warranty period. This non-transferable, 1 year limited warranty is only to you, the first end-user purchaser. If a defect covered by this warranty occurs AND you provide proof of purchase, Lucid Sound, Inc., at its option, will repair or replace the product at no charge (excluding shipping to Lucid Sound). The Lucid Sound, Inc., 1 year limited warranty is available to North American and European customers. Your sole and exclusive remedy is repair or replacement of your Lucid Sound product. In no event shall Lucid Sound’s liability exceed the original purchase price of the product. This warranty does not apply to: (a) normal wear and tear or abusive use; (b) industrial, professional or commercial use; (c) if the product has been tampered with or modified. Xbox One Chat Cable / Mobile 3.5mm Cable Xbox 360 Chat Cable USB Charging Cable Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. To receive warranty service, please contact us at: lucidsound.com 888-661-4469 support@lucidsound.com Optical Cable Optical Input USER GUIDE ©2016 Lucid Sound, Inc. PO Box 131112 Carlsbad, CA 92013 U.S.A. Lucid Sound, Lucid Gaming, the Lucid Sound logo, and the Lucid Gaming logo are trademarks of Lucid Sound, Inc., its subsidiaries, and affiliates. The shape and design of this product are a trade dress of Lucid Sound, Inc., its subsidiaries and affiliates. All rights reserved. All other product names and images are trademarks or registered trademarks of their respective owners. Made in China. Product features, appearance and specifications may be subject to change without notice. Please retain this information for future reference. Status LED Solid = ON/Connected Slow Blink = Searching Blink twice then pause = Pairing Boom Mic Mic Port Cover Client/Owner Project LS30 QSG Title HL LS30-QSG Version. Project Address 2100 Palomar Airport Rd. Suite 214-14 Carlsbad, CA 92011 CONFIDENTIAL 09.29.15 Model No. Quick Start Guide Drwn: Date Copyright © by LucidSound 2015 0001 Scale 1:1 Rev.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:12:15 11:49:48+08:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2016:02:03 09:47:30+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : LS30UG_12-7-15-改 Metadata Date : 2016:02:03 09:47:30+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 92 Thumbnail Format : JPEG Thumbnail Image : (Binary data 7445 bytes, use -b option to extract) Instance ID : uuid:28603c1f-2a34-482f-9158-06c6f4807fdc Document ID : xmp.did:EBFDCAD3DAA2E5118A17BADABB2C08F4 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:EAFDCAD3DAA2E5118A17BADABB2C08F4 Derived From Document ID : xmp.did:EAFDCAD3DAA2E5118A17BADABB2C08F4 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:3634DEB17B32E511A6B6B84FF5D2320E, xmp.iid:EBFDCAD3DAA2E5118A17BADABB2C08F4 History When : 2015:07:25 11:17:35+08:00, 2015:12:15 11:49:42+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 1034.697222 Max Page Size H : 383.513197 Max Page Size Unit : Millimeters Font Name : Helvetica, Helvetica-Bold, HelveticaNeue-Light, HelveticaNeue-Medium, HelveticaNeue-Bold, HelveticaNeue, AdobeSongStd-Light Font Family : Helvetica, Helvetica, Helvetica Neue, Helvetica Neue, Helvetica Neue, Helvetica Neue, Adobe 宋体 Std Font Face : Regular, Bold, 45 Light, 65 Medium, 75 Bold, Regular, L Font Type : TrueType, TrueType, Open Type, Open Type, Open Type, TrueType, Open Type Font Version : Version 1.3 (Hewlett-Packard), Version 1.3 (Hewlett-Packard), OTF 1.0;PS 001.002;Core 1.0.22, OTF 1.0;PS 001.002;Core 1.0.22, OTF 1.0;PS 001.102;Core 1.0.22, 7.0d27e1, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False Font File Name : Helvetica.ttf, Helvetica Bold.ttf, HelveticaNeue-Light.otf, HelveticaNeue-Medium.otf, HelveticaNeue-Bold.otf, Helvetica Neue.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Warm Red U, PANTONE 8402 C Swatch Groups Colorants L : 43.921600 Swatch Groups Colorants A : 0 Swatch Groups Colorants B : 1 Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 2EXIF Metadata provided by EXIF.tools