Luidia Global IPBT-210 eQuil SmartPen 2 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2311211
Application ID	BSBX9FimxEIi6YvUmjl/PQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	160.31kB (2003850 bits)
Date Submitted	2014-06-30 00:00:00
Date Available	2014-12-27 00:00:00
Creation Date	2017-10-22 05:01:28
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 05:01:28
Document Title	0609_equil2_부분수정_KOR
Document Creator	Adobe Illustrator CC (Macintosh)

Components
Tip!
A. eQuil Smartpen 2
1. When the Pen tip 6 is pushed over a minute, the Pen power turns off to save the battery life.
In that case, push the Pen power button 7 once to turn the Pen on.
2. The LED 1 blinks when the Receiver battery is weak.
3. You need to charge the Pen when the LED 8 keeps blinking.
4. Lights on the Power LED 1 and Digital pen LED 8 are on when charging.
When it is completely charged, the lights are off.
5. You can do pen refilling by using the Pen lead ejector 13 .
B. Charging cable
Digital pen
Cradle cover
C. Quick Start
1)
Place the Pen tip 6 on the left side
of the Pen lead ejector 13 and
slide it down to the right.
D. User’s Guide (Warranty included)
Receiver
2)
Pull the Pen towards you to eject the pen
lead. Place the Pen refill 11 into the pen.
6. The replaceable cradle cover will be available in various colors from November 2013.
Charging cradle
Components Details
Key Feature
RESET
Remove the pen from the paper and hover above the paper to perform certain actions, including:
※Different apps features different gesture functions – check out our app tutorial for more details.
1. Gesture Functions
Receiver - Front
Power LED
Bluetooth LED
Receiver magnet clip
Receiver power button
Receiver - Bottom
Receiver reset button
(App → Setting → Tutorial)
Digital Pen
Pen tip
Pen power button
LED
a. Double click the pen button
b. Draw a circle counter clockwise in the air
while keeping holding the button.
c. Draw a circle clockwise in the air keeping
holding the button.
11
10
12
13
2. Other functions
10
Receiver – Charging cradle (Back)
Pen lid ejector
Pen lid
11
Charging cradle (Bottom)
(with receiver removed)
Pen refill
12
13
Charging cradle (Side)
Charging socket
Pen lead ejector
Cloud function (Cloud/Dropbox), photoshop convertible function, and many other functions to come – check out
our app tutorial. (App → Setting → Tutorial)
Bluetooth Connection 
1.Turning on the Receiver
3. Ready to Use
Make sure to fully charge the eQuil Smartpen 2 before use
(How to charge: place both the Pen and the Receiver into the Cradle and connect the Charging socket 12
with the Charging cable (B)).
The Power LED 1 automatically turns on when the Receiver is removed from the Cradle, and automatically turns
off when the Receiver is put back to the Cradle. The Bluetooth LED 2 is slowly blinking when the Receiver turns
on. You can also use the Receiver power button 4 to manually turn the Receiver on.
If pairing is completed, the Bluetooth LED
is running.
should be always on while the designated application (“app”)
Notice!
※ Once paired, eQuil Smartpen 2 and your device are automatically connected when the Receiver power button 4
is on. When there are 2 or more devices within the range of Bluetooth use, however, the Bluetooth setting of the
previously used one should be turned off, and Step 1, 2, and 3 of Bluetooth connection repeated.
※ Ensuring proper position of the Bluetooth switch button
The Bluetooth switch button can be found when flipping the Receiver magnet clip 3 over.
Make sure the button is switched towards iOS side when using Bluetooth on iPhone/ iPad/ iPod, and Others side
when using Macbooks or PCs.
How to Use
12
When you wish to pair your device through Bluetooth for the first time, refer to the page on the left to
connect. Once paired, the eQuil Smartpen 2 and your device are automatically connected as soon as the
Receiver is on. Try to pair again on your setting when pairing is not automatically done.
(only if you use 1 device. If 2 or more, refer to the ‘Notice!’ )
2. Bluetooth Pairing
Click the Receiver power button 4 to completely turn off the power.
Make sure the power is off, keep holding the Receiver power button 4 , and wait until the blue Bluetooth LED 2 is
blinking fast (approx. 5 times/sec.). Then go to the device that you wish to pair with to find ‘Setting → Bluetooth →
Equil-xxxxxx(Individual Serial No.)’ to connect. When pairing is completed, the Bluetooth LED 2 starts to blink
slowly (approx. once every 2 sec.) again.
settings
1. Place the Receiver on the top of the paper.

Bluetooth

Bluetooth
2cm
Devices
Connected

2. Go to the app store to download the designated app (The app‘Equil’is available on the app store).
At the moment the app‘Equil Note’ and ‘Equil Sketch’ are available and there are more to come.
If you wish to use the app on Macbook / MacPro / Windows, go to www.myequil.com to download
the relevant apps.
3. Make sure the Bluetooth LED
on the Receiver is on after running the app.
4. Make sure the LED 8 is blinking (white light) and the Pen tip 6 makes a little ultrasonic
sound whenever you press the Pen power button 7 . If you cannot hear the sound,
you should check the charging status of the eQuil Smartpen 2.
5. eQuil Smartpen 2 is ready now. Have fun!
Caution
1. If the Pen still writes even hovering above the paper, push the Pen power button for over 5 seconds
until the Pen LED blinks fast three times.
2. Do not place any obstacles between the Receiver and the device, or the Receiver and the Pen you use.
3. This product was developed using ultrasonic and infrared rays.
Therefore, below are environments that can cause malfunctions and you should be avoid:
a. Where there is strong metallic sound (e.g. coins)
b. Directly underneath air-conditioners/heaters
c. Directly underneath strong lights or rays of the sun
d. Where humidity is high (e.g. bathroom)
4. Built-in batteries might be totally discharged upon purchase – the cradle & the pen, as a set, needs to
be charged. (completely charged within 2 hours; up to 8-hour working time)
5. The ideal temperature range for the product usage is between 10℃ and 40℃.
6. There might be malfunctions when grabbing near the Pen tip 6 .


Warranty
Equil – 1 year warranty Equil guarantees its hardware products and accessary for their material and technical defaults for a year upon the date of the purchase. Equil does not guarantee general wear-out, any
unexpected damages or abuses. If you wish to have our warranty service, call the operators of Equi,l or visit direct retailers of Equil or authorized service provider of Equil. A range of possible service options vary
depending on which country you request from. There might be phone charge or international shipping costs. Refer to www.myequil.com for the entire terms and conditions of the service. A copy of this Warranty can
be provided by email. Warranty benefits are applied along with rights provided by local Consumer Laws.
10
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit different from that to which the
WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two
Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may
cause undesirable operation.
Hereby, PNF Co.,Ltd. declares that this IPBT-210 is in compliance with the essential requirements
and other relevant provisions of directive 1999/5/EC.
receiver is connected.
–
Consult the dealer or an experienced radio/TV technical for help.
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
–
Reorient or relocate the receiving antenna.
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit different from that to which the
–
Consult the dealer or an experienced radio/TV technical for help.
receiver is connected.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:06:10 16:45:29-07:00
Creator                         : Adobe Illustrator CC (Macintosh)
Modify Date                     : 2014:06:26 20:38:03+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : 0609_equil2_부분수정_KOR
Metadata Date                   : 2014:06:26 20:38:03+09:00
Creator Tool                    : Adobe Illustrator CC (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 128
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 12066 bytes, use -b option to extract)
Instance ID                     : uuid:d268f4cf-8e10-41d8-ba7f-537ff3deba63
Document ID                     : xmp.did:71632569-ae23-4969-ba95-a214b3b057ee
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:0a37072f-2b08-604c-b351-7056d7934e41
Derived From Document ID        : xmp.did:3ed6f764-468d-42d6-9d08-1a684c51881f
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:D7BD0CFE2D0EE3119EEB9CC968A0B0A3, xmp.iid:71632569-ae23-4969-ba95-a214b3b057ee
History When                    : 2013:08:26 18:00:44+09:00, 2014:06:10 16:45:26-07:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 841.889600
Max Page Size H                 : 595.280300
Max Page Size Unit              : Pixels
Font Name                       : HelveticaNeue-Bold, MyriadPro-Light, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold, YDIYGO310, YDIYGO320, YDIYGO330, YDIYGO340, YDIYGO350, YDIYGO360, AdobeMyungjoStd-Medium
Font Family                     : Helvetica Neue, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, -윤고딕310, -윤고딕320, -윤고딕330, -윤고딕340, -윤고딕350, -윤고딕360, Adobe 명조 Std
Font Face                       : Bold, Light, Regular, Semibold, Bold, Regular, Regular, Regular, Regular, Regular, Regular, M
Font Type                       : TrueType, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, TrueType, TrueType, TrueType, TrueType, Open Type
Font Version                    : 9.0d57e1, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 2.00, Version 2.00, Version 2.00, Version 2.00, Version 2.00, Version 2.00, Version 1.014;PS 1.004;hotconv 1.0.70;makeotf.lib2.5.58329
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : HelveticaNeue.dfont, MyriadPro-Light.otf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf, ¿±∞̵Ò310.ttf, ¿±∞̵Ò320.ttf, ¿±∞̵Ò330.ttf, ¿±∞̵Ò340.ttf, ¿±∞̵Ò350.ttf, ¿±∞̵Ò360.ttf, AdobeMyungjoStd-Medium.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 59.375000
Swatch Groups Colorants Magenta : 89.453100
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 0.000000
Producer                        : Adobe PDF library 11.00
Page Count                      : 4
For                             : Heeju Choi,
Bounding Box                    : 51 -1789 2163 -737
Container Version               : 11
Creator Version                 : 17

EXIF Metadata provided by EXIF.tools