Lumenetix CTM0-DDM0 Color Tuning Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2648828
Application ID	Qyy3Cee2p29oZCJfvCHCcA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	226.81kB (2835087 bits)
Date Submitted	2015-06-16 00:00:00
Date Available	2015-06-16 00:00:00
Creation Date	2014-11-03 21:58:47
Producing Software	pdfTeX-1.40.10
Document Lastmod	2014-11-05 13:49:36
Document Title	Users Manual
Document Creator	TeX

THE TRUE AND PERFECT LIGHT
araya LED Light Engine
CTM0 32 CTM0 19 CTM0 12
DDM0 32 DDM0 19 DDM0 12
Installation Guide
®
TABLE OF CONTENTS
1 Introduction
2 Heat Sinking
2.1 Compatible Heat Sinks
2.2 Mechanical Attachment of the Heat Sink
3 CTM Case Temperature Measurement
4 Secondary Optics
4.1 CTM0 12 Reflectors
4.2 DDM0 19 Reflectors
4.2.1 Attaching Reflectors
4.2.2 Compatible Reflectors
5 Power Supplies
6 DDM Wiring Diagrams
6.1 0-10V Control of Dimming / On/Off Line Voltage Switching
6.2 0-10V Control of Dimming / On/Off Class II Switching
7 CTM Wiring Diagrams
7.1 Wireless Operation of Dimming, CCT, Saturation and Hue
7.2 0-10V Control of Dimming / Wireless Operation of CCT, Saturation and Hue
7.3 0-10V Control of Dimming and Preset Scenes of CCT, Saturation and Hue
7.4 0-10V Control of Dimming and Continuous CCT
iii | araya LED Light Engine Installation Guide
®
10
1 INTRODUCTION
This Installation Guide covers the following araya® Color Tuning Modules (CTM) and Dynamic Dimming Modules™ (DDM)
CTM0 32 • DDM0 32
CTM0 19 • DDM0 19
CTM0 12 • DDM0 12
For complete Color Tuning Module specifications, please visit: www.lumenetix.com/downloads
This Installation Guide covers heat sinking, case temperature measurement, secondary optics, power supply and wiring diagrams
for wireless operation using the Lumenetix Light Commissioning Tool, industry standard 0-10V wired controls or a hybrid
operation that combines hard wired and wireless control.
For long term, reliable operation, proper heat sinking is critical.
The CTM Source diffuser is fragile. Avoid touching the diffuser
during handling and assembly.
Do not operate the CTM while it is resting face down against
a table or other solid surface.
araya LED Light Engine Installation Guide | 2
®
2 HEATSINKING
The CTM light module requires an external heat sink in order to ensure proper operating temperature of the LEDs. The CTM
has a conductive aluminum case and an efficient thermal path to the LED array. These features promote efficient thermal
management and allow for a simple heat sink design in most applications.
Examples of heat sinking methods are: cast or extruded heat sinks, an aluminum panel or aluminum fixture housing. Both
carbon and stainless steel are much less efficient at transferring heat than aluminum and therefore are not recommended as
heat sink material. The heat sink mounting surface should be flat and smooth. Metal-to-metal contact surfaces will result in best
performance; anodized or unfinished mounting surfaces are recommended. Mounting the CTM on a painted aluminum surface
will reduce the performance of the heat sink material.
2.1 Compatible Heat Sinks
The following tables list heat sinks models that have compatible form factors and thermal resistance characteristics for use
with the CTM. The thermal resistances assume an approximate ambient temperature of 25C. The heat sinks listed here
are suggestions only. The heat sink must be evaluated and temperature tested in the fixture application at applicable
ambient temperatures.
MechaTronix (round)
Part Number
Dia. (mm)
Height (mm)
Thermal Resistance (°C/W)
LSB9950
99
50
1.3 – 1.5
LSB9980
99
80
1.2 – 1.4
Additional product information at www.led-heatsink.com
Nuventix (round)
Part Number
Description
Input Voltage
Dia. (mm)
Height (mm)
Thermal Resistance (°C/W)
95
39
2.5 (heat sink only)
HP30S-CALBL-001
Heat Sink
SPARS-CM005-002 (1)
Cooler
5V
1.0 – 1.55
SPARS-CM012-002 (1)
Cooler
12V
1.0 – 1.55
Additional product information at www.nuventix.com
No current commercial 24V power supply offerings with dual voltage out for Nuventix Synjet cooler (24V out w/ 5V or 12V out).
Requires DC/DC voltage adaptor without dual voltage output.
Aavid Thermalloy Heat Sink Extrusions (square/rectangular)
Part Number
Width (mm)
Length
67590
88
88
31
1.5 – 1.7
61085
136
85
33
1.4 – 1.6
Additional product information at www.aavid.com
3 | araya LED Light Engine Installation Guide
®
Height (mm)
Thermal Resistance (°C/W)
2.2 Mechanical Attachment of the Heat Sink
The CTM/DDM light engine has two options for heat sink mounting:
1. Front mount using four 4-40 or M2.5 screws
2. Rear mount using three M3 screws
70.53mm B.C.
2.78in
81mm
3.2in
POWER LEADS: 1 RED, 1 BLACK, 22 GA
610mm (24in) LONG, 6mm (.25in) STRIP LENGTH
4X FRONT MOUNT
3.10mm
.12in
(FOR 4-40 UNC
OR M2.5 SCREWS)
31°
46°
90°
DIMMING LEADS:
1 PURPLE, 1 GREY, 24 GA
CCT LEADS:
1 BLUE, 1 WHITE, 24 GA (NOT USED ON DDM)
610mm (24in) LONG,
6mm (.25in) STRIP LENGTH
61°
77°
44°
90°
22mm
.85in
3X 120°
CONTROL LEAD PORT
3X M 3mm x0.5
.12in
5mm (.2in)
REAR MOUNT
RESERVED FOR FUTURE USE
POWER LEAD PORT
Figure 1: Rear Mount of CTM/DDM to Heat Sink
araya LED Light Engine Installation Guide | 4
®
3 CTM CASE TEMPERATURE MEASUREMENT
The thermal management characteristics of the heat sink used with the CTM should be validated by measuring its case
temperature. This test should be done with the CTM installed in the fixture at ambient temperature and air flow conditions similar
to the end-use installation.
araya CTMs are available with two ranges: 1600 – 4000K and 2700 – 6000K. The power draw of the CTM varies by approximately
one watt over the CCT range with peak power draw occurring at the CCT shown in the following table. Depending on the CCT
range, the case temperature should be measured at the following CCT setting.
®
CCT Setting for Case Temperature Measurement
CTM CCT range
CCT Setting to Measure Tcase
1600 – 4000K
2800K
2800 – 6000K
4400K
The proper case temperature measurement location is next to the exit for the power leads, see Figure 3. The temperature reading
should be made after the unit has reached steady state, where the case temperature levels out. It is recommended to design for a
case temperature of 70° C at maximum ambient temperature conditions
The CTM color tuning module has built-in over-temperature protection. It is designed to turn down the current to the LED array
when the case temperature reaches 75° C. This ensures the LEDs don’t exceed their maximum rated temperature.
Figure 2: Case Temperature Measurement Point
5 | araya LED Light Engine Installation Guide
®
4 SECONDARY OPTICS
4.1 CTM0 12 Reflectors
The CTM0 12 accepts the Lumenetix sReflector and mReflectors and has attachment features to accept other reflectors.
M1.8
THREAD FORMING
REFLECTOR
SOURCE APERTURE
5 mm (0.187")
Figure 3: CTM0 12 Front Attaching Reflectors
Reflector Type
Fastener Specification
sReflector
0 – 80 x ¼" Flathead
mReflector
M1.8 x 6 Thread Forming Flathead
NOTE: mReflector shown,
assembly similar for sReflector
Figure 4: Side Mount Attachment of the sReflector and the mReflector
araya LED Light Engine Installation Guide | 6
®
4.2 CTM0 19 Reflectors
4.2.1 Attaching Reflectors
The CTM0 19 accepts the twist-to-lock reflectors with an attachment collar. The module also has provisions for front mount
reflectors. The fastener specifications are shown in the following table while mounting hole locations are shown in Figures 6 & 7.
CTM0 19 Secondary Optics Fastener Specifications
CTM0 19 Reflector
Fastener specifications
Screw length
Twist Lock w/ Collar
2 - 28 x 3/16, M1.8 x 5
5 mm (3/16")
Front Mount
2 - 28, M1.8
5 mm (3/16") or 10 mm (3/8")
M1.8 x 5, 2 - 28 x 3/16
THREAD FORMING
USE FLAT HEAD SCREWS
REFLECTOR
2 - 28 OR M1.8
THREAD FORMING
SOURCE APERTURE
5 mm (0.187")
REFLECTOR
SOURCE APERTURE
10 mm (0.375")
Figure 5: CTM0 19 Twist-Lock Style Reflectors with
attachment collars
Figure 6: CTM0 19 Front Attaching Reflectors
4.2.2 Compatible Reflectors
CTM0 19 Compatible Twist-Lock Reflectors
Vendor: Diffractive Optics, www.diffractive-optics.com
CTM0 19 Compatible Front Mount Reflectors
Vendor: Alux-Luxar, www.alux-luxar.com
Part Number
Beam Angle (degrees)
Part Number
Beam Angle (degrees)
P6680
40
XLC 400
28
P6645
60
XLC 500
26
P7879
40
XLC 800
42
P6764
60
7 | araya LED Light Engine Installation Guide
®
XLC 1100
27
XLC 1300
22
XLC 1400
25
XLC 1500
53
5 POWER SUPPLY REQUIREMENTS
General Requirements
Description
CTM, DDM 25W
DDM 20W
Voltage Output
24V DC
24V DC
Current Output
1.25 A per module
1.0 A per module
Component Listing
Class 2
Class 2
Recommended Power Supplies
Vendor: Philips
Part Number
Qty of Units Powered
Input Voltage
Connection type
LED120A1400C24F
120V
Terminal block
LED120A0024V18F
120V
Terminal block
913700625082
207V – 264V
Flying leads
INTA0024V28FLO
120V – 277V
Flying leads
INTA0024V41FO
120V – 277V
Flying leads
LED120A0024V10F*
120V
Terminal block
Part Number
Qty of Units Powered
Input Voltage
Connection type
OT30/120/24
120V
Flying leads
OT75W/24V/UNV
120 – 277V
Flying leads
OT96W/24V/UNV
120 – 277V
Flying leads
Part Number
Qty of Units Powered
Input Voltage
Connection type
LED 035/24 E020
108V – 264V
Terminal block
* DDM 20W only
Vendor: Osram Sylvania
Vendor: Tridonic
araya LED Light Engine Installation Guide | 8
®
6 DDM WIRING DIAGRAMS
6.1 0-10V Control of Dimming / On/Off Line Voltage Switching
Lead Color and Input
0-10 V CONTROLLER WITH LINE VOLTAGE SWITCH
INPUT
10 V
COMMON
Lead Color
Input
Red
Positive 24V
DIMMING
100%
0V
GREY
5%
VIOLET
HOT LINE IN
Black
Negative
Violet
0-10V Dimming
Gray
Common
Note:
1. CTM sources current to
0-10V control at 0.2mA
nominal capacity.
24V DC POWER SUPPLY
25W 1.25 CAPACITY / DDM
20W 1.0A CAPACITY / DDM
NEUTRAL IN
ARAYA DDM LIGHT ENGINE
Figure 7
6.2 0-10V Control of Dimming / On/Off Class II Switching
Lead Color and Input
0-10 V CONTROLLER WITH CLASS II SWITCH
INPUT
COMMON
10 V
Lead Color
Input
Red
Positive 24V
DIMMING
100%
GREY
0V
VIOLET
5%
24V IN
SWITCHED OUT
Black
Negative
Violet
0-10V Dimming
Gray
Common
Note:
1. CTM sources current to
0-10V control at 0.2mA
nominal capacity.
24V DC POWER SUPPLY
25W 1.25 CAPACITY / DDM
20W 1.0A CAPACITY / DDM
ARAYA DDM LIGHT ENGINE
Figure 8
9 | araya LED Light Engine Installation Guide
®
LINE IN
VOLTAGE
7 CTM WIRING DIAGRAMS
7.1 Wireless Operation of Dimming, CCT, Saturation and Hue
Lead Color and Input
LCT
INPUT
LCT WIRELESS
INPUT
DIMMING
LCT WIRELESS
CCT / SAT+HUE
100%
5%
Lead Color
Input
Red
Positive 24V
Black
Negative
Violet
Ground to Common
Gray
Common
White
Common
Blue
Ground to Common
Figure 9
7.2 0-10V Control of Dimming / Wireless Operation of CCT, Saturation and Hue
Lead Color and Input
0-10 V CONTROLLER
INPUT
COMMON
10 V
INPUT
DIMMING
LCT WIRELESS
CCT / SAT+HUE
GREY
0V
VIOLET
100%
5%
LCT
Lead Color
Input
Red
Positive 24V
Black
Negative
Violet
0-10V Dimming
Gray
Common
White
Common
Blue
Ground to Common
Note:
1. CTM sources current to
0-10V control at 0.2mA
nominal capacity.
Figure 10
araya LED Light Engine Installation Guide | 10
®
7.3 0 -10V Control of Dimming and Preset Scenes
of CCT, Saturation and Hue
10 V
COMMON
INPUT
INPUT
Lead Color and Input
COMMON
DIMMING
PRESETS
100%
SCENE 5
SCENE 4
SCENE 2
BLUE
0V
WHITE
5%
GREY
VIOLET
SCENE 3
Lead Color
Input
Red
Positive 24V
Black
Negative
Violet
0-10V Dimming
Gray
Common
White
Common
Blue
0-10V Presets
SCENE 1
Notes:
1. Preset scenes are commissioned and
activated using the LCT. See LCT
operating instructions.
2. If 0-10V control is not being used for
dimming, the violet control lead must
be grounded to gray common lead.
3. CTM sources current to 0-10V control
at 0.2mA nominal capacity.
Figure 11
7.4 0-10V Control of Dimming and Continuous CCT
INPUT
10 V
COMMON
INPUT
DIMMING
Continuous CCT
BLUE
0V
WHITE
GREY
VIOLET
100%
5%
COMMON
Lead Color and Input
Lead Color
Input
Red
Positive 24V
Black
Negative
Violet
0-10V Dimming
Gray
Common
White
Common
Blue
0-10V CCT
Notes:
1. If no preset scenes are activated using
the LCT, the CTM defaults to 0-10V
control of the continuous CCT range.
2. If 0-10V control is not being used for
dimming, the violet control lead must
be grounded to gray common lead.
3. CTM sources current to 0-10V control
at 0.2mA nominal capacity.
Figure 12
11 | araya LED Light Engine Installation Guide
®
Lumenetix Inc.
4742 Scotts Valley Drive
Scotts Valley CA 95066
877.805.7284
www.lumenetix.com
Revised 01.24.14
Specifications subject to
change without notice


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 14
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:8fd8eac0-f78c-46ea-b2b9-9681ad423083
Trapped                         : False
Producer                        : pdfTeX-1.40.10
PTEX Fullbanner                 : This is pdfTeX, Version 3.1415926-1.40.10-2.2 (TeX Live 2009/Debian) kpathsea version 5.0.0
Modify Date                     : 2014:11:05 13:49:36+08:00
Create Date                     : 2014:11:03 21:58:47-08:00
Creator Tool                    : TeX
Metadata Date                   : 2014:11:05 13:49:36+08:00
Document ID                     : uuid:083e2264-9961-4a0a-b0c2-c0ece7d03a06
Format                          : application/pdf
Creator                         : TeX
PTEX Fullbanner                 : This is pdfTeX, Version 3.1415926-1.40.10-2.2 (TeX Live 2009/Debian) kpathsea version 5.0.0

EXIF Metadata provided by EXIF.tools