Lumi Legend SLS-1 Smart Light Speaker User Manual

Lumi Legend Corporation Smart Light Speaker

User manual

Smart Touch Lamp SpeakerPacking listuser manualUSB data cableSpecificationsProduct Name: Smart Light SpeakerModel No.: SLS-1Power Input: Micro USB,DC5V 1000mABattery Capacity: 3.7V/2200mACharging Time: 2.5-4hoursSpeaker Spec: 2.5Inch,4ohm/5WFrequency Response: 70Hz-20KHzDistortion: ≤0.5%Signal to Noise Ratio: ≥65dbMaterial: ABS/Silica-gelMusic Playing Time: 15 hours at volume level 15.Lighting Time: 15 hours at lowest brightness. Button FunctionsSmart touch lamp speaker is a product which integrates touchable lamp and bluetooth speaker. The touchable lamp can be easily switched on/off and into different brightness level by hand touching on top centre of the product. The Bluetooth speaker is a smart device which integrates audio player(Bluetooth mode, SD mode, Line In mode), FM player and clock function. Please check detail operations in each function description in following paragraph. Introduction 23456Button/Indicator List189101171213 14 15 16 17Power Switch: it's used to cut off the power supply under safety purpose in delivery.The product can't get power supply when this switch is off.Alarm Set: enter alarm set mode.Sleep Indicator: it will light when sleep mode is turned on.Sleep: turn on/off automatic sleep mode.Alarm On: turn on/off the alarm.Clock Set: enter clock set mode.Charging Port: micro USB port as input power.Charging Indicator: to show whether battery's charging?TF Port: port to insert TF card.Line In: 3.5mm port to connect line in signal.Micro Phone: micro phone for hand free call in bluetooth mode.LED DisplayMode: switch speaker in different mode: bluetooth, TF, line in, FM tuner. : play back/volume down/number down. : play forward/volume up/number up. : play/pause/pick upON/OFF: switch to active/sleep mode.1234567891011121314151617User Manual3.5mm audio cableBTSDFMspeakerSLS-1
TF Card Music ModeInsert a TF card with stored music, press ”Mode” button to get into ”TF Card Music Mode”, the speaker will automatically play music in priority of stored date. Touch LampTouch the top centre of the speaker grill, the lamp will switch different lighting level after each touch. There are 3 lighting levels and off level. ON/OFFSlide the ON/OFF switch to turn the speaker into Active or Sleep mode. In Active mode, all the function is available. In Sleep mode, only alarm/clock is running and battery consumes in lowest speed.17Automatic Sleep ModePress the sleep button to turn on sleep mode, blue indicator(8)will light, speaker and lamp will automatically be in sleep mode after 20minutes. 4Clock SettingLong press Clock Set button to get into Clock Setting Mode, the hour number displayed will flash. Press to switch hour or minutes setting. Press to set displayed numbers. Short press “Clock Set”(6) to finish and quit clock setting.615 1416Alarm Setting Long press Alarm Setting button to get into Alarm Setting Mode, the hour number displayed will flash. Press to switch hour or minutes setting. Press to set displayed numbers. Short press Alarm Setting to finish and quit alarm setting, the alarm will be effective then. Alarm On button is to simply turn on and off the alarm.21615 14 25When the Bluetooth device connected last time is open, the speaker will connect it automatically.New Bluetooth connection can’t be built if last connection is not cut off.If the Bluetooth connection can’t be built successfully, try to forget the speaker Bluetooth name in your phone and reboot the speaker by turning on and turning off Power Switch. 123Note: 1Line In ModePress “Mode” button to get into “Line In Mode”, connect speaker to an audio source with 3.5mm connector. Volume Up: long press Volume Down: long press 1514Volume Up: long press Volume Down: long press Last Song: short press Next Song : short pressPlay/Pause: short press1514141614Bluetooth Mode Press Mode button to get into Bluetooth mode, the speaker will be ready for paring, the screen displays “blue”. Open Bluetooth setting on your Bluetooth device and search the speaker, click “LampSpk-SLS1” to choose and connect, the speaker will say “ bluetooth is connected” when connection succeed. 13Volume Up: long press Volume Down: long press Last Song: short press Next Song : short pressPlay/Pause: short press1514141614FM Tuner ModePress Mode button to get into “FM Tuner Mode”, connect USB cable to power port as FM radio antenna. Press the speaker will automatically search and store available FM radio channel. Press to switch and play stored channel. The speaker can store up to 99 channels.,1614USB data cable as FM antennaPower On and ChargingCaution: Turn on power switch before first use by pressing with a pin, this is the switch of product power supply, normally it’s off before handing over, the product can't work if this switch is off.Charge the speaker with the provided USB cable which is compatible with any cell phone charger( the output voltage is 5V, and output current should be 1000mA and above).The charging indicator is red while charging and will be off when the speaker is fully charged. 1Speaker Mode SelectionPress Mode button once after once to cycle speaker in different mode: Bluetooth mode, TF card music mode, line in mode, FM tuner mode, standby mode. If there are no TF card inserted in TF port, the mode cycle will pass TF card music mode.13Bluetooth Hand Free CallIn bluetooth connection, the speaker will read the calling number when a call is coming in, press to pick up a hand free call. Closer to micro phone to get better voice quality.1613
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Navigation menu