Lumi United Technology WXKG02LM Wireless Remote Switch User Manual
Lumi United Technology Co., Ltd Wireless Remote Switch Users Manual
Users Manual revised
WXKG02LM, WXKG03LM Wireless Remote Switch (Double Rocker) Quick Start Guide Product Introduction Wireless Remote Switch (Double Rocker) is a remote control switch, applying Zigbee wireless communication technology. It uses industry standard 86mm size, and the panel has the same appearance with the Wall Switch(No Neutral, Double Rocker). It is easily installed and used once being pasted. It works with the Hub to control Smart Wall Switch, Smart plug and other smart devices. * A Hub or Hub function device is required to work with this device. * Aqara Hub is required to enable Wireless Remote Switch (Double Rocker) to work with HomeKit technology. * This device is for indoor use only. Quick Setup 1. Please add the Hub to the app according to the Hub Quick Start Guide 2. Please open the app, and tap “+” in the top right corner to enter Add Device page. Select “Wireless Remote Switch (Double Rocker)”, and operates according to instructions. *If the connection failed, please move the device closer to the Hub and try again. Home Scene Device Hub Add sub-device Installation Effective Range Test: After the device is added successfully, fast press the Wireless Remote Switch (Double Rocker) for 5 times. If the Hub makes voice prompts, it indicates that the Wireless Remote Switch (Double Rocker) can communicate effectively with the Hub. *Avoid metal surface to maximize signal strength. Method 1: Place the device where you need it. Method 2: Peel and stick where the surface is clean and dry. Peel the sticker and stick it where needed Recommended Scenes Stick the Wireless Remote Switch to the door and it serves as a doorbell Place the Wireless Remote Switch beside the bed. You can turn off all lights at the tap of a button without getting out of bed Indicator Light Description Indicator Light Device Status Blue light blinks once Send command Blue light blinks three times Not connected Blue light blinks continuously Connecting to the network Specifications Model:WXKG03LM Standard:Q/QLML009-2016 Operating Temperature:-5° – +50° C Operating Humidity:5% – 95% RH, no condensation Battery:CR2032 Wireless Protocol: Zigbee FCC ID:2AKIT-WXKG02LM Federal Communications Commission (FCC) compliance statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate t he equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC C Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor rect the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. IC:22635-WXKG02LM IC NOTICE TO CANADIAN USERS This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES‐003 (Cet appareil numérique de la Classe B conforme à la norme NMB‐003 du Canada). Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement est conforme aux limites IC d'exposition aux radiations définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet émetteur ne doit pas être situé ou opérant en conjonction avec une autre antenne ou émetteur. Hereby, LUMI UNITED TECHNOLOGY CO., LTD declares that the Radio Equipment type is in compliance with RED 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.lumiunited.com/DoC. This product can be used across EU member states. Symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. RECYCLING. This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. Symbol for “ENVIRONMENT PROTECTION – Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or retailer for recycling advice.” Complies with the European Union’s“Restriction of Hazardous Substances Directive, ”which protects the environment by restricting specific hazardous materials and products.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Freddie Title : <453A5CA1BEB9A4D7F7CEC4BCFEA1BF5CA1BEBCECB2E2C8CFD6A4A1BF5CA1BEC8CFD6A4B2FAC6B7A1BF5CA1BE4151617261A1BFC5B7C3CBC8CFD6A45C43452043425C576972656C6573732052656D6F746520537769746368202853696E676C6520446F75626C652020526F636B6572295CCBB5C3F7CAE95 Create Date : 2018:04:18 17:43:29+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2018:05:25 09:19:56+08:00 Metadata Date : 2018:05:25 09:19:56+08:00 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:b0f3e454-c26a-425c-b0c7-611e1a011c61 Instance ID : uuid:5c837106-00e9-4505-b269-925735031e64 Page Count : 5 Author : FreddieEXIF Metadata provided by EXIF.tools