Lutron Electronics 0024 HRT-3LD SIGNAL REPEATER User Manual RF Signal Repeater

Lutron Electronics Company Inc HRT-3LD SIGNAL REPEATER RF Signal Repeater

USERS MANUAL FOR HRT SIGNAL REPEATER

Download: Lutron Electronics 0024 HRT-3LD  SIGNAL REPEATER User Manual RF Signal Repeater
Mirror Download [FCC.gov]Lutron Electronics 0024 HRT-3LD  SIGNAL REPEATER User Manual RF Signal Repeater
Document ID285188
Application IDta5ipV67HLV3OVWwPXTWgA==
Document DescriptionUSERS MANUAL FOR HRT SIGNAL REPEATER
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize49.08kB (613482 bits)
Date Submitted2002-11-22 00:00:00
Date Available2002-11-15 00:00:00
Creation Date2002-11-14 12:42:42
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2002-11-14 12:42:42
Document TitleRF Signal Repeater.qxd
Document CreatorPScript5.dll Version 5.2
Document Author: rlau

RF Signal Repeater
Installation Instructions
Please Read Before Installing
HR-REP-SW
120/127VAC, 50/60Hz (DC Adapter)
Overview
The HomeWorks RF Signal Repeater provides additional
coverage area for Radio Frequency (RF) signals sent
between HomeWorks RF Dimmers/Switches, and RF
Keypads. Each RF Signal Repeater covers approximately
2500 square feet (232m2) of living space.
Codes: Install in accordance with all local and national
electrical codes.
Environment: Ambient operating temperature:
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
AU
XIL
IAR
AC
Cleaning: Clean with a soft damp cloth only. Do not use
any chemical or abrasive cleaners.
TIV
AT
TE
ST
RF Device Placement: RF Signal Repeaters must be
located within 60 feet (18m) of an RF Processor or
another RF Signal Repeater.
Power: Use only the DC adapter provided by Lutron with
your unit (Lutron model # T120-9DC-3-WH).
Caution - Using a DC adapter not rated at the
following specifications could damage the control and possibly overheat the DC adapter.
• Input: AC 120/127V 50/60Hz
• Output: DC 9V/300mA Class 2
HR-REP-SW
Optional Wall Mounting
DC Adapter Installation
RF Signal Repeaters may be wall mounted using the
supplied wall bracket.
1. Find a suitable location for the RF Signal
Attach wall bracket to wall using the
supplied screws and wall anchors.
Wrap excess DC Adapter cord
around the cord holder. Align
Repeater and snap onto wall
bracket.
Repeater. Place the Repeater in a convenient and
accessible location. Note: RF Signal Repeaters
should be located within 60 feet (18m) of another
RF Signal Repeater or an RF Processor.
2. Apply power to the RF Signal Repeater.
UP
UP
Verify Auxiliary
LED is lit when
powered
Operation
Function LEDs
AUXILIARY
ACTIVATE
TEST
Test Button
Tests whether RF
components can
“hear” RF Signal
Repeater, and if RF
Signal Repeater can
“hear” RF components.
Activate Button
Used when adding
RF Signal Repeater
to the system.
Auxiliary Button
LED indicates RF
Signal Repeater is
powered (button is
not used).
Plug in power
cord and DC
adapter
System Communications
Home A: 2500 sq. ft. (232m2) or less - all RF devices within 30' (9m) of RF Processor
Notes
RF Tabletop
Keypad
• RF Dimmers and Keypads must be located within 30 feet (9m) of an RF Signal
Repeater or an RF Processor. Multiple
repeaters may be necessary to provide
adequate coverage.
• RF Dimmers cannot be controlled by the
system and RF Keypads do not function
until they are addressed and programmed.
See the HomeWorks Utility online help.
RF Dimmer
RF Keypad
P/N 292
292-153
153
30 Feet (9m) maximum
RF Processor
Home B: 2500 sq. ft. (232m2) or greater - some RF devices more than 30' (9m) from RF Processor
RF Tabletop
Keypad
30 Feet (9m) maximum
RF Signal Repeater
RF Dimmer
RF Keypad
60 Feet (18m)
maximum
between RF
Processors and
Repeaters, or
between
Repeaters
P/N 292
292-153
153
RF Processor
30 Feet (9m) maximum
HomeWorks® Interactive RF Signal Repeater Troubleshooting
Symptom
Cause and Action
Repeater appears not to be working.
No power available to unit.
• Faulty power supply. Replace power supply.
Repeater not programmed.
• Refer to the HomeWorks Utility online help for programming instructions.
Orange Auxiliary LED is flashing.
Repeater is out of system communication range.
• Move repeater to within 60 feet (18m) of the RF
Processor or another repeater.
FCC Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the seperation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by Lutron Electronics Co. could
void the user’s authority to operate this equipment.
Industry Canada Information
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
Technical and Sales Assistance
If you need assistance, call the toll-free Lutron
Technical Support Center. Please provide exact
model number when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean)
Other countries call:
Tel: (610) 282-3800
Fax: (610) 282-3090
Visit our Web site at www.lutron.com
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 11/02 P/N 043-110 Rev. A
LIMITED WARRANTY
Lutron will, at its option, repair or replace any unit that is defective in materials or manufacture within two years after purchase. After the two year period, a pro-rated warranty applies
to this product until eight years after the purchase. For warranty service, return unit to place
of purchase or mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage prepaid. Telephone the Lutron Technical Support Center toll free at 800-523-9466. For more
information regarding this warranty contact your Lutron representative.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE
IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PURCHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,
REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,
OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING OR
INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT
OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,
OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.This product may be covered by one or more of the following U.S. patents:
4,835,343; 5,736,965; 5,838,226; 5,848,054; 5,905,442; 5,982,103; DES 389,805; DES
404,013 and corresponding foreign patents. U.S. and foreign patents pending. Lutron and
HomeWorks are registered trademarks of Lutron Electronics Co., Inc.
© 2002 Lutron Electronics Co., Inc.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:11:14 12:42:42-05:00
Modify Date                     : 2002:11:14 12:42:42-05:00
Page Count                      : 4
Creation Date                   : 2002:11:14 17:42:42Z
Mod Date                        : 2002:11:14 17:42:42Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : rlau
Metadata Date                   : 2002:11:14 17:42:42Z
Creator                         : rlau
Title                           : RF Signal Repeater.qxd
EXIF Metadata provided by EXIF.tools
FCC ID Filing: JPZ0024

Navigation menu