Lutron Electronics 0037 Home Works tabletop radio frequency keypad control User Manual 043 112a

Download:
Mirror Download [FCC.gov]
Document ID	593805
Application ID	gYXsexzl/Lv3BVfm6ckmPA==
Document Description	Installation Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.34kB (591792 bits)
Date Submitted	2005-10-20 00:00:00
Date Available	2005-10-20 00:00:00
Creation Date	2003-02-20 08:17:59
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-02-20 08:17:59
Document Title	043-112a.qxd
Document Creator	PScript5.dll Version 5.2
Document Author:	rlau

RF Tabletop Keypads
Installation Instructions
HRT5KP-A, -C 10KP-A, -C 15KP-A, -C 6LKP-A, -C
5RL-A, -C 10RL-A, -C 15RL-A, -C 6LRL-A, -C
Please Read Before Installing
120/127 V ~ , 50/60 Hz (9 V adapter, -A and -C models)
Batteries: 2 AAA size, 1.5V each (-C models)
Overview
HRT-5KP
HRT-5RL
HRT-10KP
HRT-10RL
HRT-15KP
HRT-15RL
HRT-6LKP
HRT-6LRL
RF Tabletop Keypads are for use with HomeWorks systems. The keypad buttons are programmed with a personal computer using the HomeWorks Utility.
Up to 32 keypads, each with a unique address, can be
assigned to each HomeWorks RF Processor.
Important Notes
Codes: Install in accordance with all local and national
electrical codes.
Power: Battery-powered models (-C only): Use only high
quality alkaline batteries, two (2) size AAA, 1.5V each.
Caution - Do not use rechargeable batteries.
Using improperly rated batteries could damage
the RF Tabletop Keypad.
All models (-A, -C): Use only the adapter provided by
Lutron with your RF Tabletop Keypad.
Caution - Using an adapter not rated for the
following specifications could damage the keypad and possibly overheat the adapter.
• Input: 120/127 VAC, 50/60 Hz
• Output: 9 VDC/300 mA Class 2
Environment: Ambient operating temperature:
32-104°F (0-40°C), 0-90% humidity, non-condensing.
Indoor use only.
Faceplates: Do not paint controls or faceplates.
Cleaning: To clean, wipe with a clean damp cloth. DO
NOT use any chemical cleaning solutions.
RF Device Placement: RF Tabletop Keypads must be
located within 30 feet (10m) of an RF Signal Repeater or
an RF Processor.
Setup: RF Tabletop Keypads will not function until they
are addressed and programmed. See the HomeWorks
Utility online help.
Installation
Battery Installation (-C Models)
Adapter Installation (All Models)
1. Remove battery cover.
1. Find a suitable location for the RF Tabletop
Keypad. Place the keypad in a convenient and
accessible location. Note: RF Keypads must be
located within 30 feet (10m) of an RF Signal
Repeater or an RF Processor.
2. Apply power to the RF Tabletop Keypad.
Plug in power
cord and
adapter
2. Install batteries as shown. Use two 1.5V AAA
alkaline batteries only.
Refer to battery
installation diagram
molded inside battery
compartment.
Mounting Diagram
RF Tabletop Keypads may be wall mounted using the
supplied wall bracket.
3. Replace battery cover.
1. Attach wall bracket to wall using the supplied
screws and wall anchors.
2. Wrap excess adapter cord (if using) around the
cord holder. Align keypad and snap onto wall
bracket.
Note: Battery-powered models only
• The RF Tabletop Keypad goes to “sleep” after a
short period of inactivity.
• Press any button to “wake up” the keypad.
Troubleshooting Guide
RF Keypads will not control other system devices until the keypads are addressed and programmed. See the
HomeWorks® Utility online help.
Symptom
Cause and Action
LEDs on an adapter-powered keypad do not light.
No power available to keypad.
• Verify adapter is plugged in.
Faulty adapter.
• Replace adapter.
A battery-powered keypad will not “wake up” when a button is pressed.
Dead, low, or no batteries in keypad.
• Replace the batteries.
Batteries are incorrectly installed.
• Install batteries as indicated inside the keypad.
Batteries are not making contact with the battery terminals.
• Adjust the batteries so they make contact with the terminals.
A battery-powered keypad “wakes up” but goes to “sleep”
quickly after a button press.
Batteries are low.
• Replace the batteries.
A battery-powered keypad’s LEDs cycle up and down during “wake up”, but the system lights do not respond to button presses.
Keypad is out of system communications range.
• Move the keypad to within 30 ft. (10m) of an RF Signal
Repeater or RF Processor.
Button being pressed has not been programmed.
• See the HomeWorks Utility online help for programming
details.
Button presses on keypad cause the keypad to quickly
flash all its LEDs simultaneously.
Keypad has not been addressed.
• See the HomeWorks Utility online help for setup details.
Button presses on keypad cause the keypad to slowly
flash all its LEDs simultaneously.
Keypad has an address, but does not have a valid programming database.
• See the HomeWorks Utility online help for programming
details.
FCC Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the seperation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by Lutron Electronics Co. could
void the user’s authority to operate this equipment.
Industry Canada Information
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
Technical and Sales Assistance
If you need assistance, call the toll-free Lutron
Technical Support Center. Please provide exact
model number when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean)
Other countries call:
Tel: (610) 282-3800
Fax: (610) 282-3090
Visit our Web site at www.lutron.com
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 02/03 P/N 043-112 Rev. B
LIMITED WARRANTY
Lutron will, at its option, repair or replace any unit that is defective in materials or manufacture within two years after purchase. For warranty service, return unit to place of purchase or
mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone
the Lutron Technical Support Center toll free at 800-523-9466. After the two year period, a
pro-rated warranty applies to this product until eight years after the purchase. For more information regarding this warranty contact your Lutron representative.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE
IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PURCHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,
REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,
OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING OR
INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT
OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,
OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.
This product may be covered by one or more of the following U.S. patents: 5,248,919;
5,736,965; 5,838,226; 5,905,442; D389,461; D395,037; D422,969; D428,855; D436,579 and
corresponding foreign patents. U.S. and foreign patents pending. Lutron and HomeWorks are
registered trademarks of Lutron Electronics Co., Inc.
© 2003 Lutron Electronics Co., Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:02:20 08:17:59-05:00
Modify Date                     : 2003:02:20 08:17:59-05:00
Page Count                      : 4
Creation Date                   : 2003:02:20 13:17:59Z
Mod Date                        : 2003:02:20 13:17:59Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : rlau
Metadata Date                   : 2003:02:20 13:17:59Z
Creator                         : rlau
Title                           : 043-112a.qxd

EXIF Metadata provided by EXIF.tools