Lutron Electronics 0079 Occupancy/Vacancy Sensor User Manual additional

Lutron Electronics Company Inc Occupancy/Vacancy Sensor additional

Contents

User Manual (additional)

SPECIFICATION SUBMITTAL PageJob Name:Job Number:Model Numbers:Radio Powr SavrTM Wireless Occupancy and Vacancy Sensors369432 Rev A 1 04.08.11Wireless Ceiling Mount SensorLutron’s ceiling-mounted occupancy/vacancy sensors are wireless, battery-powered passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming and switching devices. These sensors detect the heat from people moving within an area to determine when the space is occupied. The sensors then wirelessly transmit the appropriate commands to the associated dimming and switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings along with ease of installation.Features•Wirelessoccupancysensorhas3settingsavailable:Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, and Manual-On/Auto-Off•Auto-OnLow-Lightfeaturewillonlyturnlightson automatically if there is less than approximately 1 fc (10 lux) of ambient light•VacancymodelavailabletomeetCATitle24requirements•10-yearbatterylifedesign•Passiveinfraredmotiondetectionwithexclusive LutronXCTTM Technology for fine motion detection•360˚coveragerangesfrom324sqft(98m()to676sqft(206m() (depending on mounting height)•Multipleceiling-mountmethodsavailablefordifferentceiling materials•RoHScompliant•SimpleandintuitiveadjustmentsavailableforTimeout,Auto-On, and Activity settings•Frontaccessibletestbuttonsmakesetupeasy•Lensilluminatesduringtestmodetoverifyideallocations•Multiplesensorscanbeaddedforextendedcoverage—refer to product specification submittal of receiving device to determine system limitsCompatible RF Devices:•ForusewithLutron® products only•CommunicatestothefollowingwirelessLutron systems: - Maestro®Wireless®(MRF2) - GRAFIK Eye®QSWireless -EnergiSavrNodeTMQS(withQSSensorModuleonQSLink) - Quantum® (withQSSensorModuleonQSLink) - RadioRA® 2 -HomeWorks®QSModels Available:•LRF2-OCR2B-P-WH* 434 MHz Occupancy/Vacancy Sensor•LRF2-VCR2B-P-WH* 434 MHz Vacancy Sensor*WH(white)
SPECIFICATION SUBMITTAL PageJob Name:Job Number:Model Numbers:Radio Powr SavrTM Wireless Occupancy and Vacancy Sensors369432 Rev A 2 04.08.113.57 in(90.7mm)1.13 in(28.7 mm)0.887 in(22.5 mm)2.85 in(72.4 mm)SpecificationsStandards•FCCcertied•ICcertied•COFETELcertied•RoHScompliantEnvironment•Temperature:32˚Fto104˚F(0˚Cto40˚C)•ForindooruseonlyPower•Operatingvoltage:3V-•Operatingcurrent:14μAnominal•RequiresoneCR123lithiumbattery•10-yearbatterylifedesign•Non-volatilememory(savedchangesarestored during power loss)Sensor Coverage Test•Frontaccessibletestbutton•Lensilluminatesorangeinresponsetomotionduringtestmodeandisvisiblefrom60ft(18m)Wireless Communication Test•Frontaccessibletestbutton•TurnloadsonandoffTimeout Options•1minute*•5minutes•15minutes**•30minutesAuto-On Options (Occupancy Version Only)•“Always”**-SensorturnslightsONandOFFauto-matically.•“Lowlight”-SensorturnslightsONautomaticallyonlyinlowambientlightconditions.Sensorturnslights OFF automatically.•“Disable”-LightsmustbeturnedONmanuallyfromdimmingorswitchingdevice.SensorturnslightsOFF automatically.Activity Options•LowActivity**( )•MediumActivity( )•HighActivity( )**-intendedforuseinhigh-activity,brieyoccupiedareas only*-defaultsettingsDimensions
SPECIFICATION SUBMITTAL PageJob Name:Job Number:Model Numbers:Radio Powr SavrTM Wireless Occupancy and Vacancy Sensors369432 Rev A 3 04.08.11Range DiagramsSensor Coverage with an 8 ft (2.4 m) Ceiling15 ft(4.6 m)12 ft(3.7 m)9 ft(2.7 m)6 ft(1.8 m)3 ft(0.9 m)0 ft(0 m)3 ft(0.9 m)6 ft(1.8 m)9 ft(2.7 m)12 ft(3.7 m)15 ft(4.6 m)Radius of Coverage at FloorSensorOccupant18 x 18 ft (5.5 x 5.5 m)Maximum Room Dimensionsfor Complete Coverage whenmounted on an 8 ft (2.4 m) Ceiling13 ft (4.0 m) Radius of Coverage at Floor whenmounted on an 8 ft (2.4 m) CeilingCeilingFloor8 ft(2.4 m)Ceiling heightInstructionsSensor Coverage Chart (for sensor mounted in center of room)Ceiling heightMaximum room dimensionsfor complete floor coverage Square feet8 ft (2.4 m) 18 × 18 ft (5.5 × 5.5 m) 324 ft2 (30.2 m2)9 ft (2.7 m) 20 × 20 ft (6.1 × 6.1 m) 400 ft2 (37.2 m2)10 ft (3.0 m) 22 × 22 ft (6.7 × 6.7 m) 484 ft2 (44.9 m2)12 ft (3.7 m) 26 × 26 ft (7.9 × 7.9 m) 676 ft2 (62.4 m2)*Multiplesensorscanbeaddedforextendedcoverage—refer to product specification submittal of receiving device to determine system limits.
SPECIFICATION SUBMITTAL PageJob Name:Job Number:Model Numbers:Radio Powr SavrTM Wireless Occupancy and Vacancy Sensors369432 Rev A 4 04.08.11Installation OverviewSensor Placement•Thesensor’sabilitytodetectmotionrequireslineofsightofroomoccupants.Thesensormusthaveanunob-structed view of the room. DO NOT mount behind or near tall cabinets, shelves, hanging fixtures, ceiling fans, etc.Thesensorcannotseethroughglassobjectssuchaspatioorshowerdoors.•Hotobjectsandmovingaircurrentscanaffectthesensor’sperformance.Toensureproperoperation,thesen-sorshouldbemountedatleast4ft(1.2m)awayfromlightbulbsbelowtheceilinglineandHVACvents.•Thesensor’sperformancedependsonatemperaturedifferentialbetweentheambientroomtemperatureandthatofroomoccupants.Warmerroomsmayreducethesensor’sabilitytodetectoccupants.•Thesensorshouldbemountedwithin60ft(18m)lineofsightor30ft(9.1m)throughwalls,oftheassociateddimming and switching receiving devices.Mounting•MountingofanyRFdevicesonorincloseproximitytoametalsurface(e.g.directlyonxturewithmetalhousing,metal-backedceilingtile)willdrasticallyreducetheeffectiverangeofradiosignaltransmissionorreception.•AllRFdevicesmustbemountedonnon-conductivematerialstoensureproperperformance. Temporary mounting is recommended to test sensor coverage and wireless communication before permanently installing the sensor. Drop Ceiling (Compressed Fiber Ceiling Tile)•Theceilingtilemountingwireisprovidedforbothtemporaryandpermanentmountingofthesensortoceilingtiles. It is designed to allow temporary mounting, testing, and repositioning (if necessary) of the sensor without damaging a ceiling tile. Once the sensor’s final position has been chosen, the mounting wire should be twisted tolockthesensorinplacepermanently. Solid Ceiling (Drywall, Plaster, Concrete, or Wood)•Temporarymounting:Onedouble-sidedadhesivestripisprovidedfortemporarilymountingandtesting the sensor. •Permanentmounting:Screwsandanchors(fordrywallorplaster)providedtomountsensor. Recess Mount•Ceilingmountclampsinternallytoceilingtile.Sensortwist-locksintomount,sitsushwithceiling(asshownbelow)•Openingis3"indiameter•Purchasedasaseparatekit:LRF-CRMK-WHInstalling the Ceiling Mount Adapter Cut mounting hole Cut a 3 in to 3 in (76 mm to 76 mm) diameter hole to insert the ceiling mount adapter. Instalación del adaptador de montaje en cielo raso Corte un orifi cio de montaje Corte un orifi cio de 76 mm a 76 mm (3 pulg. a 3 pulg.) de diámetro para insertar el adaptador de montaje en cielo raso.Insert ceiling mount adapterInsert the ceiling mount adapter into the hole and rotate brackets outwards by turning screws.Inserte el adaptador de montaje en cielo rasoInserte el adaptador de montaje en cielo raso en el orifi cio y gire los soportes hacia afuera apretando los tornillos.1 12 23 in to 3 in(76 mm to 76 mm)76 mm to 76 mm(3 in to 3 in)Note: No need to access top of ceiling.Nota: No se requiere acceso a la parte su-perior del cielo raso. Clamp adapter to ceilingUsing a Philips screwdriver, hand-tighten the brackets, clamping the adapter to the ceiling. Do not overtighten. Fije el adaptador al cielo raso Utilice un destornillador Phillips para ajustar a mano los soportes y fi jar el adaptador al cielo raso. No ajuste demasiado. 3 3®Installation English Instalación Español
SPECIFICATION SUBMITTAL PageJob Name:Job Number:Model Numbers:Radio Powr SavrTM Wireless Occupancy and Vacancy Sensors369432 Rev A 5 04.08.11Lens Masking Wheneverpossible,thesensorshouldbeinstalledinalocationwhereitcannoteasilyseeintoareasoutsidetheintendedspace,suchashallwaysoradjacentrooms.Ifthissituationcannotbeavoided,portionsofthelensmaybemaskedwiththeprovidedlabelstoblockthesensor’sviewoftheundesiredareas.Lens sections shown in white aremaskedwithlabelsLens sections shown in gray have not been maskedLens label maskingsheet

Navigation menu