Lutron Electronics 0104 Bridge User Manual 1 of 2

Lutron Electronics Company Inc Bridge 1 of 2

Contents

User manual 1 of 2

OFFONquick-start guideLutron® Smart Bridge, Pico® remote control & In-wall dimmerWelcome—and thank you for purchasing a CasétaT Wireless kit. In order to control your lights from an app or remote, you’ll need to replace an existing switch with a CasétaT Wireless in-wall dimmer.Before you install the dimmer, please watch the installation video at www.casetawireless.com.We hope you enjoy the convenience of CasétaT Wireless!NOTE: You can mix and match dimmable LED and CFLs, as well as halogen and incandescent light bulbs, with CasétaT Wireless dimmers.Dimmable LED and CFL light bulbs vary in their dimming performance. If you’re using these bulbs and they flicker or turn off, please visit www.casetawireless.com/support/lowend for information on adjusting the dimmer for best bulb performance.For a complete list of compatible dimmable LEDs and CFLs, please visit www.casetawireless.com/support/bulblist.Compatible light bulbs include:Cree BA19-08027OMF-12DE26-1U100 CR6Ecosmart ECS 30 WW FL 75WE 120 ECS 38 WW FL 90WE 120Feit A19/DM/LED PAR38/LEDG5Philips 9290002295Sylvania LED12A19/DIM/O/827 LED21PAR38/DIM/P/930/FL30LEDup to 150 WCFLup to 150 WHalogenup to 600 WIncandescentup to 600 WContents suppliedDouble your warrantyIn-wall dimmer (PD-6WCL)Claro® wallplate (CW-1)Tools you’ll needWorks with energy efficient dimmable light bulbs:Flat-head screwdriverPico® remote control(PJ2-3BRL)Wire connectors (3)Phillips-head screwdriverPliersScrews (2)Installation for lights with one wall switch (single-pole)Installing your dimmerUsing your CasétaT Wireless kitSome lights have one wall switch, while others have two or more wall switches (such as stair lights, which have a switch at both the top and bottom of the stairs). We’ve included instructions for lights with one wall switch (called a single-pole). If your light has more than one switch (called a 3-way), please visit www.casetawireless.com/support/3way for complete installation instructions and how-to videos.WARNING: SHOCK HAZARD.May result in serious injury or death. Turn off power at circuit breaker or fuse before installing.1 Turn power off at circuit breaker! 4 Connect the dimmer5 Mount the dimmer6 Attach the wallplate7 Turn power on at circuit breaker2 Remove existing switch from wallRemove the wallplate from switch.3 Remove side sections (if necessary)Remove the switch and pull it away from the wall.* If your switch has more than 3 wires attached, see “Installing CasétaT Wireless in a 3-way switch application” video on www.casetawireless.com/support/3-way.Bend back and forth.35146GroundGround123Ground72Disconnect all three wires* from the switch.1 Connect the bare copper (or green) “ground” wire from the wallbox to the green wire on the dimmer using a wire connector.2 Connect either of the remaining wires from the wallbox to either of the remaining wires on the dimmer using a second wire connector.3 Connect the remaining wire from the wall to the remaining wire on the dimmer using a third wire connector.Do not remove outside side sections on dimmers at the end of gang.Each dimmer has inside side sections removed.Dimmer at middle has all side sections removed.Attach the adapter to the dimmer using the screws provided snap on the wallplate.‘snap’(If you installed the dimmer next to other dimmers or switches, you’ll need to install a wallplate with the correct size/number of openings to accommodate all the devices.)Use the screws provided.Go to www.casetawireless.com/support for additional troubleshooting suggestions.Symptoms Probable cause and actionLight doesnot turn on orin-wall dimmer LEDs do notlight up.• Light bulb(s) burned out.• Breaker is OFF or tripped.• Light not properly installed.• Wiring error.• FASST switch on the dimmer is in the Off position.Light doesnot respondto Pico remote control.• The dimmer failed to pair with Pico remote control; see Pairing the dimmer and Pico remote control.• The dimmer is already at the light level the Pico remote control is sending.• The Pico remote control is outside the 30 ft (9 m) operating range.• The Pico remote control batteries are low.• The Pico remote control batteries are installed incorrectly.• Bulbs turn off while being dimmed.• Bulbs turn on at high light level but do not turn on at a low light level.• Bulbs flicker or flash when dimmed to a low light level.Verify bulbs are markeddimmable and visit www.casetawireless.com/support/lowend for information on adjusting the dimmer for best bulb performance.Love CasétaT Wireless dimmers? Have ideas for making them better? Tell us what you think and we’ll extend your warranty by 1 year. www.casetawireless.com/register.CAUTIONUse only with permanently installed fixtures with dimmable LED, dimmable CFL, halogen, or incandescent lamps. To avoid overheating and possible damage to other equipment, do not use to control receptacles, motor-driven appliances, or transformer-supplied appliances.CodesInstall in accordance with all national and local electrical codes.GroundingWhen no “grounding means” exist in wallbox, the National Electrical Code (NEC®) allows a control to be installed as a replacement if 1) a nonmetallic, noncombustible faceplate is used with nonmetallic attachment screws or 2) the circuit is protected by a ground fault circuit interrupter (GFCI). When installing a control according to these methods, cap or remove green wire before screwing control into wallbox.FCC/IC InformationThis device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.WarrantyFor warranty information, please visit www.casetawireless.com/warranty.Lutron, , Claro, and Pico are registered trademarks and FASS and Caséta are trademarks of Lutron Electronics Co., Inc. NEC is a registered trademark of the National Fire Protection Association, Quincy, Massachusetts Google and the Google logo are registered trademarks of Google Inc., used with permission. Apple is a trademark of Apple Inc., registered in the U.S. and other countries.© 2014 Lutron Electronics Co., Inc Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299, U.S.A. 1212Important note:TroubleshootingImportant note:Removing side sections reduces the dimmer’s maximum wattage rating. See the chart below for maximum wattage information.* For maximum wattage information when mixing light bulb types see www.casetawireless.com/support/ganging.Maximum* wattage derating chart (120 V~ 50/60 Hz)Side sections removed None 1 side 2 sidesLED & CFL 150 W 150 W 150 Wor*Incandescent & Halogen 600 W 500 W 400 WDevice RatingsIn-wall dimmerPD-6WCL120 V~ 50/60 HzLutronR Smart BridgeL-BDG5 V- 300 mAPicoR remote controlPJ2-3BRL3 V- 10 mA(1) CR2032 battery (included)Power SupplyT-5DC-USB5 V- 1000 mAImportant notes:1. For indoor use only 2. Operate between 32 ˚F (0 ˚C) and 104 ˚F (40 ˚C)P/N 0301715 REV AWirelessLutron® Smart Bridge (L-BDG)Power Supply(T-5DC-USB) Ethernet CableReplacing light bulbs using FASSTPull the FASST switch out on the in-wall dimmer to remove power at the light socket.OnOffDarkerBrighter (with raised icon) FASS™Front Accessible Service SwitchIn-wall dimmerPico® remote controlOnOffDarkerFavorite“Brighter” button with raised icon is easy to find in the dark P/N 0301715 REV A3Control your lights1 Press and hold “off” button on dimmer2 Press and hold “off” button on remoteThe Lutron app will walk you through setting up your devices.Download the Lutron® appwww.casetawireless.com/LutronAppLaunch the Lutron® appLutronSearch for “Lutron Caseta”3 Press and hold “off” button on remoteUse the Lutron® appAdd devices • PicoR remotes • Dimmers • Shades Schedule your lightsConnect while awayLutron

Navigation menu