Luxul Wireless XAP1410 High Power AC1200 Dual-Band Wireless AP User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2931691
Application ID	3/6Yf0BfUC5Gk/nvs6GKwg==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.54kB (681723 bits)
Date Submitted	2016-03-16 00:00:00
Date Available	2016-03-16 00:00:00
Creation Date	2015-11-17 09:56:41
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-02-25 17:04:22
Document Title	User Manual.pdf
Document Creator	Adobe InDesign CC 2015 (Macintosh)

Fold
No part of this publication, or any other publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The
material in this manual is subject to change without notice. Luxul reserves the
right to make changes to any product to improve reliability, function, or design.
No license is granted, either expressly or by implication or otherwise under any
Luxul intellectual property rights. An implied license only exists for equipment,
circuits and subsystems contained in this or any Luxul product.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: W59XAP1410
IC: 8584A-XAP1410
FCC Statement—Wireless FCC 2.4GHz & 5GHz 802.11abgn
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah,
84020, declares that this Luxul XAP-1410 is in compliance with the
essential requirements and other relevant provisions of Directive
1995/5/EC.
For a copy of this report send a self addressed stamped envelope
to: Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.
Industry Canada (RSS-Gen Issue 4)
CAN ICES-3(B)/NMB-3(B)
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
© 2015 Luxul. All Rights Reserved. LUX-QIG-XAP-1410 11171509
6XAP1410USA1G
READ ME FIRST
LEGAL AND REGULATORY INFORMATION
Fold
Fold
READ ME FIRST - CONTROLLER COMPATIBILITY
QUICK INSTALL GUIDE
This XAP-1410 is compatible with the Luxul Wireless Controller for fast, easy
configuration and deployment of wireless networks with multiple APs.
nn Note: If you’ll be using this AP with a Wireless Controller, refer to
the Quick Install Guide included with the Wireless Controller for
setup instructions.
AP SETUP AND CONFIGURATION
High Power AC1200
Dual-Band Wireless Access Point
cc Caution: Attach the rubber feet to the mount and attach the mount to
the AP for flat surface placement to avoid overheating and failure.
Includes:
„„
One: High Power AC1200 Dual-Band Wireless AP
„„
One: Mounting Brackets and Hardware
„„
One: PoE Injector and Power Cable
„„
One: Ethernet Cable
XX
Multiple Access Point Placement: You may need to experiment with
AP placement to optimize the roaming experience. Place APs to ensure
adequate coverage, but not so far apart that there is no signal overlap.
Adjacent APs should overlap enough that the client device has a good
connection to the AP to which it is currently attached, but also sees the
next-nearest AP. Ideally, roaming clients should see signal strength of
two overlapping APs in the range of -60 to -70 dBm at the midway
point between two APs. To learn more about AP placement, visit
luxul.com/ap-placement.
Physical Installation
The XAP-1410 access point is designed for simple and efficient installation
and can be located one of three ways. First, the included mount is designed to
attach directly to several different regions’ standard electrical boxes. Second,
the XAP-1410 may be mounted on a ceiling or wall without a box by using the
included mount as a guide to mark attachment locations. Finally, the XAP-1410
can be placed on a flat surface by attaching the included rubber feet
to the mount.
XAP-1410
XX
Single Access Point Placement: Because the signal generated by the
XAP-1410 is omnidirectional, the unit should be located as near as possible
to the center of the desired coverage area.
Ideally, roaming clients should see
signal strength of two overlapping
APs in the range of -60 to -70 dBm at
the midway point between two APs
XAP-1410 Multiple AP Coverage and Overlap
nn Note: Consider using Ekahau HeatMapper to assist with this process,
available from www.ekahau.com. Luxul also offers an informative
“How-To” video on HeatMapper at luxul.com/how-to-videos.
AP SETUP AND CONFIGURATION CONT.
Connecting Ethernet and Power
Ethernet and Power
To apply power and network simultaneously, simply connect one end of an
Ethernet cable to a PoE switch, and the other end to the XAP-1410 PoE port.
XAP-1410 Single AP Coverage Pattern
To connect power and Ethernet separately, first connect an Ethernet cable
from the supplied PoE Injector Data & PWR Out port to the PoE port on
the XAP-1410. An Ethernet cable length of up to 300 feet can be used.
Fold
Next, connect an Ethernet cable from your Router or Switch to the Data
IN port on the PoE Injector. Finally, connect the AC cord to the included
PoE Injector, then to the AC outlet.
nn Note: Category-6 shielded twisted pair is recommended for best
results and stable data transmission at the highest data rates.
However, CAT5/CAT5e/CAT6 UTP cable can also be used.
PoE Injector Setup
Fold
If your network uses an address scheme other than 192.168.0.X, you’ll need
to set a temporary static IP address on the computer you’re using for configuration. To do so, set the IP address of your computer to an address in the
192.168.0.X range, then set the Gateway/Router address to 192.168.0.10 (the
default IP address of the XAP-1410).
Once you’re finished configuring the AP, you can return your computer’s IP
configuration to normal, typically “Obtain Automatically/DHCP.”
nn Note: Visit http://luxul.com/ip-addressing to learn more about
changing your computer’s IP address and getting connected.
XX
Data In: Connect an Ethernet cable from your router or switch to the
Data In port of the included PoE Injector.
XX
Data & PWR Out: Connect an Ethernet cable from the Data & PWR Out
port of the included PoE Injector to the PoE Port of the XAP-1410.
XX
AC Power: Connect the included AC Cord to the Power Input of the
Included Injector first and then to the AC outlet.
Getting Connected
Luxul AP
From your
Router or Switch
DATA &
PWR OUT
DATA IN
POE
Injector
XX
Connecting Via an Ethernet Device: Use Ethernet cable to connect
your computer to the PoE switch or PoE injector to which the XAP-1410 is
connected. Ethernet is the preferred method of connection.
XX
Connecting Via a Wireless Device: Connect your client device to the
XAP-1410 default wireless network named Luxul1410. The wireless network
will run in Open Security mode, so no passphrase is required until Wireless
Security is configured.
Power
Source
PoE injector
Preparing for Access
IP Addressing
If the XAP-1410 is connected to a network with a 192.168.0.X address
scheme, and your computer shares a similar address on the same network,
you can skip to the next step, Access and Setup.
nn Note: If another device on your network shares the 192.168.0.10
address, you’ll need to temporarily reassign or remove that
device while you configure the XAP-1410.
Access and Setup
Fold
nn Note: If another device on your network shares the 192.168.0.10 address,
you’ll need to temporarily reassign or remove that device while
you configure the XAP-1410.
PoE Injector: If the PWR LED is On, Power is Connected to the injector. If
the PWR LED is Off, the injector is not receiving power.
nn Note: The XAP-1410 is not a router and will need to be connected to a
network with a router in order to deliver Internet access.
The Reset button is located underneath the mount and
marked RESET. It may be used to reboot the AP or to restore
factory default settings.
Hardware Operation
LED Indicators
Enclosure: If the green Power LED is on, the XAP-1410 is powered and working.
If the Power LED is OFF, the AP is not receiving power or the LED has been
turned off in the AP’s web interface. If the green Power LED is blinking, the
XAP-1410 is booting. The two blue LEDs indicate indicate each of the 2.4GHz
and 5GHz networks are configured and broadcasting.
Default IP: 192.168.0.10
Username: admin
Password: admin
Reboot the AP: With the XAP-1410 powered on, simply
press and release the Reset button.
Restore Factory Defaults: With the XAP-1410 powered on,
press and hold the Reset button for 10 seconds, then release
the button and the XAP-1410 will restore factory defaults and reboot.
cc CAUTION: Holding the Reset button for more than a few seconds
will restore the AP to factory default and remove any
custom configuration.
nn ERP Statement: The purpose of this product is to create a constant
network connection for your devices. It does not have a standby
mode or use a power management mode. If you wish to power
down this product, please unplug it from the power socket.
Logging In
To access the AP’s web configuration, open your web browser and enter the
AP’s default 192.168.0.10 IP address in the address field. Log in to the AP using
the default user name and password:
Reset Button
XAP-1410 LED’s

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2015:11:17 09:56:41-07:00
Metadata Date                   : 2016:02:25 17:04:22+08:00
Modify Date                     : 2016:02:25 17:04:22+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:d5e82960-4cfb-46f5-b7e4-208b9b7519f0
Original Document ID            : xmp.did:f0edc94a-00b7-40ae-81f2-7908dc521841
Document ID                     : xmp.id:b2f5cf6c-224d-4287-83a4-9e25954394df
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e33581c1-75a4-42ab-8584-b672063ac3cc
Derived From Document ID        : xmp.did:4b2b2444-b01b-4f96-b1ff-05f5cc8b5aef
Derived From Original Document ID: xmp.did:f0edc94a-00b7-40ae-81f2-7908dc521841
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2015:11:17 09:56:41-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Slug Family                     : Luxul Symbols
Slug Version                    : 1.000
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : --
Slug Font Kind                  : OpenType - PS
Slug Checksum                   : 3669936636
Slug Post Script Name           : LuxulSymbols-Regular
Slug Font Sense 12 Checksum     : 3669936636
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools