Luxul Wireless XWR1200 Dual-Band AC1200 Gigabit Router User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3114926
Application ID	fUzal7nBtUlkBnWC0kzsIg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.77kB (534637 bits)
Date Submitted	2016-08-29 00:00:00
Date Available	2016-08-29 00:00:00
Creation Date	2016-07-27 10:14:59
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-08-25 14:06:44
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)

Fold
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
READ ME FIRST
Sales
P: 801-822-5450
E: sales@luxul.com
Fold
ROUTER SETUP AND CONFIGURATION
QUICK INSTALL GUIDE
XWR-1200
Includes:
LUX-QIG-XWR-1200-v1 07271610
„„
XWR-1200 Dual-Band Wireless AC3100 Gigabit Router
„„
Dual Band Antennas (Two)
„„
Ethernet Cable
„„
Power Adaptor
Physical Installation
The XWR-1200 Wireless Router is designed for simple and efficient installation.
For horizontal installation, install the rubber feet and position the XWR-1200
on a desk or other horizontal surface with adequate room around the device
for ventilation. For wall or ceiling mounting, simply follow the directions on the
included mounting pattern and use the mounting keyholes on the XWR-1200.
Dual-Band AC1200 Gigabit Router
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply
Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and
registered trademarks are property of their respective holders.
Fold
Connecting Antennas, Ethernet and Power
„„
Antennas: Ensure all dual-band antennas are installed on the router.
„„
INTERNET Connection: Connect the Ethernet cable from the modem/
router equipment provided by your Internet Service Provider (ISP) to the
black INTERNET port of the XWR-1200.
„„
AC Power: Connect the included AC Adapter to the XWR-1200 first and then
to the AC outlet.
Preparing for Access
IP Addressing
The XWR-1200 default LAN IP address is 192.168.0.1. The DHCP server on the
XWR-1200 is configured by default to create a 192.168.0.x network.
Both the default LAN IP address and subnet scheme can be changed. However
for hassle-free plug-and-play installation of other Luxul hardware, we recommend you use the default IP address if possible.
If your client device is set to obtain an address automatically, no further
configuration is required and you can skip to the next step, Access and Setup.
If your computer or device isn’t set to obtain an IP address automatically,
you’ll need to set a temporary static IP address on that device. Set the IP
address of your computer to an address in the 192.168.0.X range, then
set the Gateway/Router address to 192.168.0.1 (the default IP address of
the XWR-1200).
nn Note: Visit http://luxul.com/ip-addressing to learn more about
changing your computer’s IP address and getting connected.
Access and Setup
Getting Connected
„„
Connecting Via an Ethernet Device: Use an Ethernet cable to connect
your computer to one of the green XWR-1200 LAN ports. Ethernet is the
preferred method of connection.
„„
Connecting Via a Wireless Device: Connect a wireless client device to
one of the XWR-1200 default wireless networks (Luxul_XWR1200 or
Luxul_XWR1200_5G). Both Wireless networks will run in Open security
mode, so a passphrase will not be required until wireless security is
configured.
Open a web browser, enter 192.168.0.1, then log in to the router using the
default user name and password and proceed with configuration:
Default IP: 192.168.0.1
Username: admin
Password: admin
nn NOTE: If another device on your network shares the 192.168.0.1
address, you’ll need to reassign that device a different IP
address to configure the XWR-1200.
nn NOTE: Only devices that support the 5GHz frequency will see the
default Luxul_XWR1200_5G wireless network.
Fold
Advanced Configuration
Configuring the XWR-1200 as a Wireless Controller
The XWR-1200 can manage up to two additional access points to enable
wireless client roaming and simple configuration. To enable this feature,
ensure one or two compatible access points are connected to the same
network as the XWR-1200, then select Wireless Controller from the XWR1200 web configuration interface. Follow the online help to add the access
point(s) to the profile.
Fold
Fold
Front Panel
Hardware Operation
„„
nn NOTE: All four antennas should be installed prior to powering up
the XWR-1200 and are required for optimal performance.
XWR-1200 Front Panel LED Indicators
Indicator Name
Status
Function
5GHz
ON
A 5GHz wireless network is
broadcasting.
2.4GHz
ON
A 2.4GHz network is broadcasting.
1-4 LED
ON
„„
A device is connected to the
corresponding Ethernet port.
„„
WAN Port: (1) black RJ-45 Ethernet Port for Internet connection.
„„
LAN 1 - 4 Ports: (4) green RJ-45 Ethernet ports for connecting to the
local network.
nn NOTE: A Luxul switch is recommended in conjunction with the
XWR-1200 to increase the number of local ports available.
„„
XWR-1200 is connected to the ISP.
Internet ON
LED
FLASHING Data packets are being transmitted
Other Advanced Configuration
For more information on configuring advanced features such as DDNS,
VPN, etc., refer to the support resources at luxul.com.
USB
LED
ON
A USB-enabled device is connected
and configured.
System
LED
ON
The XWR-1200 is booting.
Power
LED
XWR-1200 Front Panel View
Rear Panel
The XWR-1200 is not booting.
ON
Power is applied to the XWR-1200.
OFF
Power is not applied to the
XWR-1200.
Reset Button: Used to restore factory default settings.
cc CAUTION: Holding the Reset button longer than 10 seconds will
result in a factory reset.
To restore factory defaults, press and hold the Reset button until the
System LED stops flashing (approximatly 20 seconds). A factory reset
will take one minute or more to complete. A successful factory reset is
indicated when all of the Port LEDs flash once. When the System LED
starts flashing again, the unit is ready.
FLASHING The XWR-1200 is operating normally.
OFF
Power Input: Power adapter included.
nn NOTE: To reboot the router, disconnect the power adapter,
wait 10 seconds and reconnect the power adapter.
FLASHING Data packets are being transmitted
to the connected device.
XWR-1200 as a Controller
Antenna Ports: 4 RPSMA female antenna ports to connect the
included antennas.
cc CAUTION: Resetting the XWR-1200 to factory defaults will remove
all custom settings.
XWR-1200 Rear Panel View

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2016:07:27 10:14:59-06:00
Metadata Date                   : 2016:08:25 14:06:44+08:00
Modify Date                     : 2016:08:25 14:06:44+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:9bb013d8-ddce-467e-b415-216455f03449
Original Document ID            : xmp.did:f0edc94a-00b7-40ae-81f2-7908dc521841
Document ID                     : xmp.id:c119e3f8-bebc-4ee2-ab12-177297aae9d2
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:5191e230-885e-46c7-ba3e-0b796ed408e0
Derived From Document ID        : xmp.did:e1710337-ff44-48f6-bcb0-c53a5fd79473
Derived From Original Document ID: xmp.did:f0edc94a-00b7-40ae-81f2-7908dc521841
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:07:27 10:14:59-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Slug Family                     : CircleFrameNegMT
Slug Version                    : 001.003
Slug Outline File Size          : 11692
Slug Kerning Checksum           : 0
Slug Foundry                    : Monotype Typography
Slug Font Kind                  : PostScript
Slug Checksum                   : 709276870
Slug Post Script Name           : CircleFrameNegMT
Slug Font Sense 12 Checksum     : 709276870
Page Count                      : 2
Language                        : en-US
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools