Luxul Wireless XWR1750 Dual Band Wireless AC1750 Gigabit Router User Manual LUX QIG XWR 1750 indd
Luxul Wireless Dual Band Wireless AC1750 Gigabit Router LUX QIG XWR 1750 indd
Users Manual
Simply Connected
Quick Install Guide
XWR-1750
Dual Band Wireless
AC1750 Gigabit Router
Use the XWR-1750 to:
Deliver Next Generation 802.11ac Gigabit Wi-Fi
with Speeds up to 1750Mbps
Maximize Data Rates with Concurrent Dual-Band
(2.4GHz and 5GHz) Technology
Optimize VoIP, Streaming Media and Other
Demanding Applications
Create a Secure Guest Network
Provide an Affordable High Performance Network
AC1750 Gigabit RouterAC1750 Gigabit Router
Use the XWR-1750 to:
Quick Install Guide
XWR-1750
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
2
DUAL BAND WIRELESS AC1750 GIGABIT ROUTER
Model Number: XWR-1750
FCC ID: W59XWR1750
Quick Install Guide
© 2013 Luxul. All Rights Reserved.
No part of this publication may be modified or adapted in any way, for any
purposes without permission in writing from Luxul. The material in this manual is
subject to change without notice. Luxul reserves the right to make changes to any
product to improve reliability, function, or design. No license is granted, either ex-
pressly or by implication or otherwise under any Luxul intellectual property rights.
An implied license only exists for equipment, circuits and subsystems contained
in this or any Luxul product.
DOCUMENT CONVENTIONS
These graphical alerts are used in this document to indicate notable situations:
NOTE: Tips, hints, or special requirements that you should take note of.
CAUTION: Care is required. Disregarding a caution can result in data
loss or equipment malfunction.
WARNING!: Indicates a condition or procedure that could result in
personal injury or equipment damage.
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CONTACT LUXUL
Sales
P: (801) 822-5450
E: sales@luxul.com
Technical Support
P: (801) 822-5450
E: support@luxul.com
Simply Connected
© 2013 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
3
PACKAGE CONTENTS
The following items should be included in the box:
XWR-1750 Dual Band Wireless AC1750 Gigabit Router
3 Dual Band RPSMA Male Antennas
Ethernet Cable
Power Adaptor
Quick Installation Guide
NOTE: If any of the listed items are missing or damaged, please contact
the reseller from whom you purchased for return/replacement.
HARDWARE DESCRIPTION
XWR-1750 LED Indicators
Indicator Name Status Function
WPS
LED
ON Indicates the XWR-1750 is ready for WPS pairing.
5GHz ON Indicates a 5GHz wireless network is broadcasting.
2.4GHz ON Indicates a 2.4GHz network is broadcasting.
1-4 LED ON Indicates a device is connected to the Ethernet port
number.
FLASHING indicates data packets are being transmitted to the
connected device.
Internet
LED
ON Indicates the XWR-1750 is connected to the ISP.
FLASHING Indicates data packets are being transmitted
USB
LED
ON Indicates a USB enabled device is connected and
configured.
System
LED
ON Indicates the XWR-1750 is booting.
FLASHING Indicates the XWR-1750 is operating normally.
OFF Indicates the XWR-1750 will not boot
Power
LED
ON ON indicates power is applied to the XWR-1750.
OFF Indicates power is not applied to the XWR-1750.
For future feature additions
Quick Install Guide
XWR-1750
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
4
Rear Panel
XWR-1750 Rear Panel View
Antenna Ports: 3 RPSMA female antenna ports to connect the included
antennas
Power Input: Power adapter included
NOTE: To hard reboot the router, remove the power adapter. Wait 10
seconds and re-apply power.
USB 1 -2 Ports: 2 USB 2.0 ports for connecting USB based printers and hard drives
WAN Port: 1 Black RJ-45 Ethernet Port for Internet connection
LAN 1 - 4 Ports: 4 Green RJ-45 Ethernet Ports for connecting to the local network
NOTE: It is recommended that a Luxul switch be used in conjunction
with the XWR-1750 to increase number of local ports available.
WPS/Reset Button: Used to confi gure WPS or restore factory default settings
CAUTION: Holding the WPS button longer than 10 seconds will result
in a factory reset
Simply Connected
© 2013 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
PREPARING FOR INSTALLATION
System Requirements
Computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera
10.6 and up. The Web browser is used to confi gure the XWR-1750.
Power must be AC 100-240V~ 1.0A 50/60Hz.
XWR-1750 INSTALLATION
Desktop Installation
For use as a desktop device, position the XWR-1750 on a desk or other horizontal
surface with adequate room around the XWR-1750 for ventilation.
Wall Installation
The XWR-1750 Is keyholed to allow installation on a wall or ceiling. Use the
Mounting Pattern (Page 8-9) for keyhole alignment.
Hardware Setup
Attach Antennas: Connect the included Dual Band Antennas to all three
antenna ports.
NOTE: All three antennas should be installed prior to powering up the
XWR-1750 and are required for optimal performance.
WAN Connection: Connect the Ethernet cable from the modem/router
equipment provided by your Internet Service Provider (ISP) to the black WAN
port of the XWR-1750.
AC Power: Connect the included AC Adapter to the XWR-1750 fi rst and then to
the AC outlet.
Quick Install Guide
XWR-1750
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
6
CONFIGURATION
Default IP Address
The XWR-1750 default IP address is 192.168.0.1. This address can be changed.
However, for hassle free installation of other XenConnect™ plug and play Luxul
devices, it is recommended that the default IP value be maintained.
Parameter: Default Value
Default IP address: 192.168.0.1
Default user name: admin
Default password: admin
Connect a Client Device
Use a computer or mobile device to connect via Ethernet or wireless to the XWR-1750.
The DHCP server on the XWR-1750 is configured by default. If your client device is set
to obtain an address automatically, no further configuration is required.
Connecting a Wireless Client Device: Connect the client device to one of the
XWR-1750 default wireless networks (LuxulXen1750_24 or LuxulXen1750_5X).
Both Wireless networks will run in Open Security mode. A passphrase is not
required until Wireless Security is configured.
Connecting an Ethernet Device: Use Ethernet cable to connect your com-
puter or device to one of the XWR-1750 LAN ports.
Login
Login to the router with the following steps:
1. Open a Web browser, and enter 192.168.0.1. The router login screen will appear.
2. Enter the user name and password (default user name and default password
are both set as “admin”), and then click “OK” to login to the router configura-
tion interface.
NOTE: Only devices that support 5GHz will see LuxulXen1750_5X
wireless network.
Simply Connected
© 2013 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
7
WPS CONFIGURATION/RESET BUTTON
Used to configure WPS (Wi-Fi Protected Setup) or restore factory default settings
wTo configure WPS, press and hold the WPS/Reset button until the WPS LED
turns on (typically about 5 seconds). The XWR-1750 is now in WPS pairing
mode. Follow the pairing instructions for your client device and enter the
XWR-1750 WPS pin number (12345678) when prompted.
CAUTION: Holding the WPS button longer than 10 seconds will result
in a factory reset
CAUTION: For optimal security, it is recommended to disable WPS
after your client devices have been configured.
wTo reset to factory defaults, press and hold the WPS/Reset button until
the System LED stops flashing (approximatly 20 seconds). A factory reset will
take one minute or more to complete. A successful factory reset is indicated
when all of the Port LEDs flash once. When the System LED starts flashing
again the unit is ready.
CAUTION: Resetting the XWR-1750 to factory defaults will remove all
custom settings.
NOTE: To hard reboot the router, remove the power adapter. Wait 10
seconds and re-apply power.
ADVANCED SETTINGS
For login and advanced settings information go to luxul.com
Quick Install Guide
XWR-1750
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
8
MOUNTING PATTERN
Simply Connected
© 2013 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
9
Quick Install Guide
XWR-1750
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
10
WARNINGS AND SAFTY INFORMATION
Read all installation instructions and site survey reports, and verify correct
equipment installation before connecting the XWR-1750 to its power source.
Verify that the electrical circuits have appropriate grounding and
overload protection.
Attach only approved power cords to the device.
Verify there is adequate ventilation around the device, and that ambient
temperatures meet equipment operation specifications.
The XWR-1750 is designed for indoor use only. DO NOT place this outdoors.
DO NOT install in or near hot or humid places, such as a kitchen or bathroom.
Take care to minimize exposure to excessive heat or moisture.
Small parts and plastic bags used for packaging may be harmful to small
children. KEEP All ACCESSORIES OUT OF THE REACH OF CHILDREN!
The XWR-1750 may become hot when in use for extended time periods. This is
normal and is not a malfunction. DO NOT install where it will be exposed to
paper, cloth or other flammable materials.
The XWR-1750 contains no user-serviceable parts. If it is not working properly,
contact your dealer and ask for help. DO NOT attempt to disassemble the device.
REGULATORY COMPLIANCE
The device complies with internationally recognized standards covering
human exposure to electromagnetic fields from radio devices. This equipment
also complies with FCC radiation exposure set forth for an uncontrolled environ-
ment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20 cm
(8 inches) during normal operation.
Unauthorized antennas, modifications, or attachments could cause damage and
may violate regulatory approvals. Any changes or modifications not expressly
approved by the party responsible for compliance could void the authority to
operate the equipment.
The equipment version marketed in the U.S. is restricted to usage of channels 1-11 only.
Health and Safety Recommendations
Warnings for the use of Wireless Devices: Please observe all warning notices
with regard to the usage of wireless devices
Potentially Hazardous Atmospheres: You are reminded of the need to observe
restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas
where the air contains chemicals or particles (such as grain, dust, or metal powders).
Simply Connected
© 2013 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
11
Safety in Hospitals: Wireless devices transmit radio frequency energy and may
affect medical electrical equipment. When installed adjacent to other equipment,
it is advised to verify that the adjacent equipment is not adversely affected.
RF Exposure Guidelines
Safety Information: The device complies with internationally recognized
standards covering human exposure to electromagnetic fields from radio devices.
Warning: Exposure to Radio Frequency (RF) Radiation:
The radiated output of this device is below the FCC radio frequency exposure
limits. Nevertheless, the device should be used in such a manner that the poten-
tial for human contact during normal operation is minimized.
The end user must avoid any extended human RF exposure directly in front of
the device, up to a distance of 20cm, when unit is on.
When servicing the equipment and selecting a location for the antennas, it
is important to note that a minimum distance of 20cm is required between
personnel and the device or antenna to comply with the radio frequency
exposure limit.
The antenna used for this transmitter must be installed to provide a separa-
tion distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
The following safety precautions should be observed:
Do not touch or move the antenna while the unit is transmitting or receiving.
Do not hold any component containing the radio such that the antenna is very
close or touching any exposed parts of the body, especially the face or eyes,
while transmitting.
Do not operate the radio or attempt to transmit data unless the antenna is
connected; this behavior may cause damage to the radio.
FCC Statement—Wireless FCC 2.4GHz & 5GHz 802.11abgn
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Information on this document supersedes all previous versions. Products and documents
subject to change without notice. Products may be discontinued without notice.
LUX-QIG-XWR-1750
085130538
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
NOTE: (1)The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment.(2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable