M3 Mobile MC-7500S GSM Phone with Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	974702
Application ID	84eOCtDFbtwt+8iVqJLu6A==
Document Description	MC 7500S User manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.76kB (2871999 bits)
Date Submitted	2008-07-23 00:00:00
Date Available	2008-08-22 00:00:00
Creation Date	2008-06-13 19:57:19
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2008-06-13 19:59:50
Document Title	untitled

Note
This manual is subject to copyright protection along with all relevant rights.
No part of this document can be copied, reproduced, changed or translated in whole or in part by any means
without prior written consent of MOBILECOMPIA Co., Ltd.
The content of the manual is provided “as-is” and be subject to change at any time without notice.
MOBILECOMPIA Co., Ltd. makes no warranty of any kind with regard to this manual, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose.
Microsoft, ActiveSync, Windows, Windows logos, Windows Mobile 5.0 logos are trademarks, or registered
trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft OEM products are
licensed by Microsoft Licensing Inc., a entirely owned subsidiary of Microsoft Corporation.
All other product names in this document or product are company names, trademarks or registered trademarks
of the respective owners.
Copyright and Agreement
This user manual is provided “as-is”. It may contain editing error or omitting due to the difficulty of expressing
technical feature.
If an application program provided by other supplier using by M3 SKY, refer to the supplier for a program
manual.
The application program providers have the responsibility of indicating their contact number for customer
service on M3 SKY terminal, item box, or program.
MobileCompia Corporation do not warranty any programs produced and added by the third software companies
after M3 SKY products are distributed from factories.
MobileCompia Corporation has the right to ask warranty of any programs to the program providers to meet the
needs of mobile networking companies.
The contents in the user’s manual are protected under the Software Copyright Act. Copy, reproduction,
distribution of the contents in the user’s manual without any written agreement notice of MobileCompia Co.
Ltd., is considered as criminal actions.
Windows, MS Office, Outlook, ActiveSync, Internet Explorer programs are the registered brand of Microsoft.
M3 SKY is the registered brand of MobileCompia Co. Ltd.
The brands of other products and service referred in this manual belong to corresponding providers.
Caution when using M3 SKY (1)
User Caution
–
–
–
–
–
–
–
Carrying and Storage Caution
–
–
–
When the unit is lost or stolen, notify to network provider immediately.
Do not rent the unit to third person without authorized permission.
Do not use the unit while driving.
For technical help, contact designated service centers.
Contact responding suppliers directly for questions on applications and work programs other than
hardware and basic installed applications.
Use supplied adapter and accessories by MobileCompia Co. Ltd.
Any defect on a unit while using other batteries, chargers and accessories can not get warranty.
Avoid to use the device under high temperature and humidity. It may cause fatality to the device.
Avoid intentional dropping from high elevation. It may cause fatality to the device.
Charge batteries fully before the first time use of the device.
Caution when using M3 SKY (2)
Do not reconstruct
–
–
–
Illegal copy of mobile phone is prohibited
–
–
–
Do not reconstruct M3 SKY for any purpose.
It may cause fire in the unit, and wound or electric shock to users.
Any defect caused by reconstructing units, can not get warranty.
The person who reproduces mobile phone and uses this mobile phone is considered as criminals.
The use of lost or stolen mobile phone is considered as a criminal act.
Keeping the lost or stolen mobile phone after turning power off, is considered as a criminal act.
Size and Features
Used frequency band
GSM
GSM
GSM
GSM
850
900
1800
1900
(TX) 824 ~ 849 MHz / (RX) 869 ~ 894 MHz
(TX) 880 ~ 915 MHz / (RX) 925 ~ 960 MHz
(TX) 1710 ~ 1785 MHz / (RX) 1805 ~ 1880 MHz
(TX) 1850 ~ 1910 MHz / (RX) 1930 ~ 1990 MHz
Band width
200 KHz
External appearance
78.6 x 163.5 x 24.9mm (Width x length x height)
Weight
320g
Transmission output power
Maximum 0.3W
Operational
Temperature
Main body
-10 ⳃ ~ +50 ⳃ
Adapter
-10 ⳃ ~ +50 ⳃ
Relative Humidity
AC Power
5% ~ 80%
Input : AC 100 ~ 250V, 50 ~ 60Hz
Output : DC +5.2V, 3.0A
Supported Frequency Bands can differ depending on the supplied antenna.
CONTENTS
Contents
Note
LED/Battery attaching/detaching
16
Copyright and Agreement
Charging
17
Caution when using M3
How to connect to PC
18
Size and Features
1. M3 Introduction
Product Composition
10
Name and function of each part
12
Input Buttons
13
Soft/Hard Reset
14
How to use stylus pen
15
2. Basic Usage
19
Calibration
20
Main screen
23
Input screen
24
3. ActiveSync
29
ActiveSync Introduction
30
Installing ActiveSync
31
Synchronization of data
32
CONTENTS
Contents
4. How to use internet
33
6. Usage of Device
53
Via GPRS/EDGE
34
Camera
54
Via Wireless LAN
36
Bluetooth
58
Browsing the Web Site
39
IrDA
63
5. How to use the Phone
44
GPS
64
Init Screen
45
Scanner
66
Phone Control
46
Phone call and receive
47
Phone book
48
SMS send and receive
49
Phone function
51
Phone setting
52
1. Introduction
Product Composition
Name and Function of each part
Input Buttons
Soft/Hard Reset
How to use Stylus pen
LED Battery Attaching/Detaching
Charging
How to connect to PC
Product Composition (1)
Introduction
At the first time of opening the product box, please check if it contains all the basic
components, listed as following.
M3 SKY main terminal
+ 2 units of standard battery
Ear Mic Phone
+ 2 units of Stylus pen
10
Cradle + USB cable
Portable Adapter
The product components may differ depending on the supplied products.
CD + ActiveSync 4.x
Product Composition (2)
How to use the manual
–
Introduction
–
11
–
–
This manual provides detailed information to make using the device easier and faster.
The content related to phone or communication in this manual is only applicable when the device is
equipped with GSM/GPRS/EDGE module for Voice and Data communication.
The features described in this manual can not be used when it is not equipped in the device (e.g. GSM,
WLAN, Bluetooth, IrDA, Scanner, Camera, GPS).
The content of this manual is subject to change without prior notice due to product improvement or
modification of its functions, etc.
Name and function of each part
Introduction
Charge Ramp (Left)
GSM/GPRS/EDGE Status
Ramp (Center)
Scanner Ramp (Right)
Camera Button
Pistol Grip Connecter
Scanner Button
Barcode Scanner
Window
Stylus Pen
Mini SD Extension Slot
Antenna
Ear Mic Plug
Volume
Button
Flash
Camera
Battery Lock
Battery
SIM Card Slot
Key Pad
12
Charge & USB/serial port
Upper (portable)
Lower (Cradle) use
E 
F
Infrared Communication Reset Switch
Port (IrDA)
LCD touch Screen
Input Button
Phone/Call button
Start button
Alphanumeric
Left, right function button
button
End button
Power button
Component
Description
Press to toggle the device on/off.
Power button
Long press to menu (Backlight, Display, etc) Function
Phone/Call function
Introduction
End function
Input keys
Left, right function button
Alphanumeric
Start button
Backspace button
Function button
Direction Button
Volume
Button
13
Input keys
Return button
Backspace button
Camera Button
press to accept the call or to execute the phone
press to hang-up/reject the call.
Press to input alphabet characters or numbers
press to lunch an assigned application or function
press to switch between alphabet and number input
Press to display the Start menu.
press to move back
Function button
press to Function Key with (*, 0, #)
Direction button
press to move left,right and up,down
Return button
press to confirm the action
Scanner button
Press to launch the barcode data scan application
Camera button
Press to launch the Pictures & Videos
Volume button
Press the top key to increase volume, press the
bottom key to decrease volume.
Scanner Button
Some key functions might not be supported, depending on the option.
Soft/Hard Reset
Introduction
ⴗ
ⴘ ⴙ
Press ⴗ+ⴘ
and ⴙ power button
Soft Reset
- A soft reset allows your device to get a fresh start,
similar to rebooting a computer.
- This restarts your device and adjusts memory
allocation.
- All records and entries are retained after a soft reset.
- Unsaved data in open programs may in some cases be
lost.
Hard Reset
- A hard reset removes power to your device.
- This erases all records and entries, deletes all additional
programs you have installed, and restores the device’s default
factory settings.
- Never perform a hard reset unless a soft reset does not correct
your problem.
To perform a hard reset :
Æ Press the power button for more than 12 seconds to turn off the power (can be confirmed by LCD off)
Æ While pressing call and end button, please press the power button shortly.
Æ When the [CLEAN BOOT WARNING] window will pop up with message “All data will be lost! Do you want to continue?”
“1. YES 0. NO, please press 1 to perform the Hard Reset.
14
Please mind that you need to set up the standard timezone date, and time. After power off.
How to use Stylus Pen
Long Press
Leave Stylus pen touching the screen
for long and you can select the menu
on the pop-up screen.
You can also select functions available
in the designated item using the popup menu.
The function of the pop-up menu can
be different according to the program.
Introduction
15
Tap
Tap the touch screen one
time using a Stylus pen to select
and execute items and files.
Drag
It is used when you select the text.
Please drag the desired part with
stylus pen attached on the screen.
LED / Battery attaching/detaching
LED Alarm
Introduction
–
16
Informs Charging, Scanner Status.
Type
LED Status
LED for
charging
Red
Green
GSM
/GRPS
Status
LED
Scanner
LED
Blue Blinking
Blue On
Blue OFF
Green
Battery attaching/detaching
–
Details
Charging
Charging complete
GSM/GPRS Standby
(within range of phone/internet)
GSM/GPRS in use
(phone/SMS/internet in use)
GSM/GPRS is off or out of range
When the barcode data is successfully read
–
Attaching Battery
As picture shown, put the battery pack to back of PDA,
and lock the battery pack with locking device.
Detaching Battery
Press locking device to the right, then using upper
notch, detach the battery from main body.
Charging
Introduction
17
Connect plug-in from charger to charge jack of main
body, or charge jack of cradle, and then place main
body onto cradle.
Charging LED
Type
LED Status
Details
Direct charging to main
body
Red
Green
Charging
Charging Complete
Cradle Charging
(Extra battery charging)
Red
Green
Charging
Charging Complete
Separate Battery
Main body
Charging LED
Separate Battery
Charging LED
Charging in Cradle
Charging using portable adapter
When charging, the status of the battery attached to
main body can be confirmed by the LED left of upper
corner of main body. Also the status of Sub-battery
can be confirmed by the LED right of low corner of
Cradle.
Do not use any other charger except one (5.2 V / 3A) provided .
Make sure to handle it gentle; damage with excessive force may cause no warranty.
Incongruent change of battery can cause the explosion.
When attached battery is completely discharged, plug charger to main body, then reset
the device to check if screen is back on. To use, do at least 10 minute charging.
How to connect to PC
A cradle of M3 SKY supports charging and USB connection.
Connecting step of cradle of M3 SKY is as following.
–
–
Introduction
–
–
Connect charger to USB cradle. (24pin connector)
Connect charger to power source. (to wall)
Connect USB cable of USB cradle to USB port of desktop PC.
Place M3 SKY onto docking cradle then execute Synchronization with
Desktop PC.
The location of USB port can be at the back, front or side of PC
and the shape of USB port is identical on Desktop PC and
Notebook.
USB host function is available by putting USB cable into USB port
of Cradle.
USB Host/Client
AC Power
USB Host/Client
changeover switch
Connecting to Cradle
18
2. Basic Usage
Calibration
Main screen
Input Screen
19
Calibration (1)
Calibrate the touch screen as shown below, at first time use or when cold (hard) booted.
ⴘ
ⴙ
Basic Usage
ⴗ
Tap the screen one time with
a Stylus pen
20
Tap the (+) mark with the
Stylus pen as it moves around.
You can see the screen how
to use the Stylus. If you
don't need it, click the Skip.
ⴗ Press and hold the Stylus pen on the screen then
select the Cut on the pop-up menu.
ⴘ Press and hold the Stylus pen like the arrow on screen,
Tap the Paste on the pop-up menu.
ⴙ When all processes are complete, click the Next.
Calibration (2)
Calibration continue....
Basic Usage
Set up the standard time zone
date, and time.
21
To set up a password, tap 'Next'
otherwise tap 'Skip'.
To set up a password set up a
password type and password.
To set up an e-mail account,
tap 'Next' otherwise tap 'Skip'.
Calibration (3)
Calibration continue....
Basic Usage
Choose outlook e-mail to set up
an e-mail account and then tap
the 'Next'.(POP3/IMAP/Outlook
/E-mail)
If you choose outlook E-mail or
POP3/IMAP and then tap the
'Next', you should set up it step
by step.
22
When all processes are complete,
tap the screen to start system.
You can see the screen above
after the Calibration.
Main Screen
Main screen
–
Main Screen is set below
Button
function
Start menu
Start menu
Basic Usage
Info bar
Info bar
View the power, modem, sound, input
mode and connecting view.
Day/Time info
Day/Time info
View the current date and time.
Wireless info
Wireless info
User info
Messages info
Task info
Today info
Lock info
User info
Messages info
Task info
Pocket MSN info
Today info
Lock info
Left / Right function info
23
Select the program you want to use.
View the Wireless power and state.
View the personal information.
View the Messages received.
View the task information.
View the Today’s information.
View the screen / Lock information.
Pocket MSN info
View the Pocket MSN information.
Left/Right Function info
View the Left / Right information.
Input Screen (1)
To use Input
- Process this program " Start > Programs > Word Mobile".
To use the Keyboard Input
Basic Usage
Tap the arrow next to the
keyboard icon and then select
the keyboard on the menu
screen as a picture above.
24
This is the Keyboard Input
Screen.
You can input the letter, number
and characters when you click
the each icon on the keyboard
Input screen.
Input Screen (2)
Usage of Block Recognizer input.
Basic Usage
Tap the arrow next to the
keyboard icon and then select the
Block Recognizer on the menu
screen as a picture above
25
It is the screen of block
recognizer input.
In this input screen you can input
letters in 'abc' and numbers in '123 ‘
each in the input box seen on the
screen.
In the input screen of block
recognizer you can input special
letters and characters by tapping
the input box once.
Input Screen (3)
Usage of Letter Recognizer
Basic Usage
Select the arrow next to the
keyboard icon and then Select the
'Letter Recognizer' on the menu
screen as the picture above.
26
This is the 'Letter Recognizer'
screen.
In the ‘Letter Recognizer' input
screen, you can input the capital
letters in 'ABC', the small letters
in 'abc' and numbers in '123' each
in the input box seen on the screen.
Please choose ‘Options…’ on the input menu.
Select ‘Letter Recognizer’ as input method and
then click ‘Options…’. Here you can configure the
input modes.
Input Screen (4)
Using transcriber input
Transcriber is a writing recognizer program. It provides you various writing input and input menu.
Basic Usage
–
Select the arrow next to the
keyboard icon and then select the
Transcriber on the menu like the
picture.
27
This is the Transcriber input
screen.
If you input letters, numbers and
characters on the screen with the
stylus pen, it would be written
automatically on the place where
the cursor is blinking. You do not
have to concern about the input
box when using transcriber.
Input Screen (5)
Input by using Keypad
–
You can input numbers and letters by using Keypad.
Basic Usage
Alphanumeric button
Convert ‘1 ,A, a’ using the input convert button
on the input screen as the left picture. Then you
can input capital letters, small letters, numbers
and characters using keypads.
For example, in the case of inputting the M3
SKY, Convert to ‘a’ > Keypad 6 > convert to ‘1’>
Keypad 3 > Convert to ‘A’ > Keypad 7(4 times)
> Keypad 5(twice) > Keypad 9 (3 times)
By pressing ‘*’, ‘0’,’#’ while ‘Fn’ button is
pressed, you can apply ‘Space’, ‘Enter’ and ‘OK’
function respectively.
Function button
28
Input Key button
Pressing ‘Fn’ Key will change the function mode
in following order : ‘Fn’ one time mode -> ‘Fn’
hold mode -> ‘Fn’ disable mode
3. ActiveSync
ActiveSync Introduction
Installing ActiveSync
Synchronization of Data
ActiveSync Troubleshooting
ActiveSync Introduction
Sync is an abbreviation of “Synchronization” and refers to the process of making data in PDA
and desktop computer to be same by linking both data.
ActiveSync
–
–
Sync is an abbreviation of ‘Synchronization” and refers to the process of making data in PDA and desktop
computer to be same by linking both data. When either PDA or PC modifies data, it updates others to the
most recent data.
Not all the data is synchronized at same time. It follows the option settings of ActiveSync, provided by
Microsoft.
By linking M3 SKY and computer, you can make data in both devices in the same status
(synchronization) or install, copy, move, delete programs for business purpose and others.
It is compulsory to install this program in order to install business programs, synchronize data,
back up and synchronize contact numbers in an address book, etc.
Do not connect USB of Cradle to desktop PC before installing Active Sync to desktop PC..
It may cause a desktop PC cannot recognize PDA since Active Sync contains PDA program
driver.
30
ActiveSync install / connect
ActiveSync
31
To install ActiveSync
Select the ActiveSync program in the CD provided, and then install it to
the computer.
–
Once the installation is complete, connecting window will start. Connect
the cradle with PC using USB cable, and then dock the device on the
cradle.
–
When the device is recognized on the PC, Connection will be established
after assigning the port for it automatically.
The definition of Partnership
It is the process of paring PC with PDA in order to exchange the data each
other. Via this process, the data on the PC and on the PDA can be
synchronized.
ⲻ The synchronization is available with Outlook 2003 or above version. It is
not supported on the outlook express which is provided together with
Windows OS.
–
Please re-try the synchronization if connection is disturbed by strong noise or static.
–To install ActiveSync on the host computer, download version 4.1 or higher from the Microsoft web
site at http://www.microsoft.com. Refer to the installation included with the ActiveSync software.
–Microsoft recommends installing ActiveSync on the host computer before connecting the mobile
computer.
USB connection to PC
Synchronization of Data
If you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this
option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear.
“Sync Options” is a menu that you can select an item to synchronize.
ActiveSync
–
32
“Sync Mode” enables you to choose synchronization methods. According to the selected synchronization mode,
there are 3 following methods:
–
–
–
Contact, Calendar, E-mail, Tasks, Memo, Favorite, Files, Media, etc.
Continuously while the device is connected: In this mode, if you want to carry out synchronization, connect the device to the
desktop computer. ActiveSync will immediately start synchronization and synchronize according to the user’s input of changes in
a computer or the device.
Only upon connection: If you want to carry out the synchronization after the first synchronization on a manual basis, click Sync.
Manually: In this mode, ActiveSync will not run automatically. In order to carry out synchronization, click Sync.
Synchronization is the process of updating M3 and desktop PC after comparing their data. Any files including
personal organizer management data, etc in M3 can synchronize with those in the desktop PC.
When Troubleshooting the ActiveSync, Check the solutions below.
Ensure the correct USB cable is used in the cradle with USB port of the PC.
Ensure the power input cable of M3 Sky or LCD.
Please re-try the Synchronization after Soft-reset or Hard-reset. Finish the running program
and save the data for sure before resetting.
4. How to use Internet
Via GPRS/EDGE
Via Wireless LAN
Browsing the Web Site
Via GPRS/EDGE (1)
To connect to the Internet via GPRS/EDGE(1)
How to use Internet
Tab ‘Start > Settings > Connections’
34
Select ‘Add a new modem connection’
of ‘My ISP’ in the ‘Connections’.
Put the name you want into the
‘Enter a name for the connection’.
Then select the ‘cellular Line(GPRS)’
in the ‘Select a modem’.
Via GPRS/EDGE (2)
To connect to the Internet via GPRS/EDGE(2)
How to use Internet
Input the Access point name
suitable to the SIM Card / Operator
company of Network then Tab the
‘Next’.
35
Tap the ‘Finish’ after input the
User name and password
according to the setting.
(In some cases, it is required to
set IP address at the advanced
menu.)
Select the ‘Manage existing connections’
on the Connections. Choose the ISP which
you want to connect to as picture above.
* The saved settings automatically applied
at connecting.
You can explore the Internet using
GPRS / EDGE connection.
Via Wireless LAN (1)
To connect directly on the Main Screen
How to use Internet
You can use the Wireless Network Via Wireless LAN.
M3 SKY supports IEEE 802.11b and 802.11g.
To connect the Wireless LAN (AP must be on and functioning)
On the Today Main screen, you select
Wireless state bar or go to ‘Start >
Settings > Connections>’ Wireless Manager.
36
Tap the WI-Fi on the ‘Wireless
Manager' to turn WLAN on.
Wireless LAN is optional. You can only use WLAN, when the WLAN
module is built in to the device.
When the dialogue box is appeared, Select the AP you want and
then, you can connect the Network with it.
Via Wireless LAN (2)
To connect via Wi-Fi menu
How to use Internet
On the settings screen, you select
Wi-Fi Icon.
You can also tap Start > Settings >
Connections>Wi-Fi.
37
Configure the connect type then
click the 'Next'.
Configure the connect type then click the 'Next'.
Input the authentification data then click
the 'Next'.
After configure Network authentification,
tap the 'Finish'. You can see the wireless
Networks available.
Via Wireless LAN (3)
Continue from the last page
Configure DHCP / Static IP
How to use Internet
–
Tap an adapter to modify setting
on the wireless LAN card and
select the 'Edit'.
38
If you configure the IP as DHCP,
Click the 'Use Server-assigned IP address.
If you configure the IP as Static,
Click the 'Use Specific IP address.
Browsing the Web Site (1)
Microsoft Internet Explorer
- Via GPRS / EGDE , Wireless LAN and Activesync connection, you can browse the web.
- You can download programs and files by accessing the Internet.
How to use Internet
To use the Internet Explorer
Tap 'Start > Internet Explorer
39
Searching
Address Window
This is the Internet Explorer
processing screen.
Input the address you want on the address window in upper of the screen, then
click the 'search'. It will try to connect to that web address via Wireless network
that is connected.
Browsing the Web Site (2)
Continue from the last page.
How to use Internet
On the 'Menu > Favorites...' you can see the list of sites that you
have saved and browse to it directly. The favorite page is like the
picture above.
On the Menu > History... You can see the list of sites that you have
recently visited. The history page is like the picture above.
See the 'Start > Help' if you want to know more about how to use the Internet Explorer
40
Browsing the Web Site(3)
To set up an e-mail account
How to use Internet
Process the 'Start > Messaging'. Select the
'Menu > Tools > New Account...in the outlook
E-mail box.
41
Set an E-mail provider for 'other‘
then tap 'Next.'
Input the E-mail address on the
Enter e-mail address , then tap ‘
Next '.
When the Status is for completed,
tap the 'Next'.
Browsing the Web Site (4)
Continue from last page
How to use Internet
Set an E-mail provider for 'other‘
then tap 'Next'.
42
Select the Account Type and put
the Name then tap 'Next'.
Input the 'Incoming mail, Outgoing
mail, Domain' then select 'Finish'.
* For detailed setting menu, please
click ‘Options’.
After finishing the setting you can send and
receive E-mail using the e-mail account.
Browsing the Web Site(5)
To send and receive an E-mail
How to use Internet
< To receive an e-mail>
Select the 'Message' on the 'Today'
Select the 'Send / Receive' in the 'Menu' and check the received mail.
43

After process the 'Message' program , select the 'New' .
You can send an e-mail when you select the 'Send' after writing a new
e-mail.
5. How to use the Phone
Init Screen
Phone Control
Phone call and receive
Phone book
SMS send and receive
Phone functions
Phone setting
44
Init Screen
How to use the Phone
Phone Main Screen
Network Type
GSM Operator
GSM / Network Status
Volume
Call Status
Contacts
Call Status
Input Number
Input Number
Key Pad
GSM Operator
Phone Menu
It shows Call Status.
It shows Inputted Numbers.
Key Pad
It is used to dial the number and can be used
as speed-dial.
Contact
It shows Phone Book Dialog.
Network Type
It displays the availability of GPRS and EDGE
connection.
GSM/Network
Status
It indicates the signal strength.
Volume
It is Volume on/off and vibrate
Phone Menu
45
It indicates the current Network Provider.
Talk, End, Speed Dial, Call History, etc menu…
Phone Control
Phone Program On/Off
How to use the Phone
Phone Call Send/End
SEND
END
Select the SEND and END button like
the picture above to start and finish
the Phone program.
You can turn on and off phone
in Wireless Manager
46
Tap the Phone button on the left bottom of
the Today Screen and then you can process the
Phone program. Also you can finish the program
using the X button.
Phone Call and Receive
Phone Call
Phone Receive
How to use the Phone
To make a call:
1.Input number via program keypad
or device keypad.
2.Make a call by pressing the ‘Talk’
button on the program, or pressing
‘SEND’ button on the device.
47
To hang up:
Press the ‘END’ button on the program or
on the device.
When you get the Incoming Call, you can receive
the phone call tapping the Answer button. If you
don’t want to receive it just tap the Ignore button.
Phonebook
To use Phonebook
Searching Contacts
How to use the Phone
New Contact
Searching
A name or
Number.
New SIM Contact
Contacts
Menu
Contacts Menu
48
Contacts Option
Input the new contact
Input the contact to the SIM Card.
Send Contact
Transmit the information of Contact by BEAM
or SMS.
Copy/Delete
Copy or delete the Contact
Options
Set the Options for Contact.
View By
See the Contact by Type ( Name , Company,
Number … )
Filter
Contacts
Option
You can search the contacts by writing the
name and number or tapping.
Filter the information you want.
Call W/H/M
Call by the number on the Contact.
Send E-mail
Send an E-mail by the address on the Contact.
Send SMS
Add to Speed Dial
Send SMS by the number on the Contact.
Add the number on the Contact to Speed Dial.
Send Contact
Send the information of Contact by BEAM or
SMS.
Copy/Delete
Copy and Delete the Contact.
SMS send and receive(1)
How to send SMS
How to use the Phone
Select ‘message information’ menu
on the main screen to send SMS.
You can also send SMS by selecting
‘SMS send’ menu on Contacts or any
other applications.
49
Change to the ‘Text Messages’ on
the Message Program like the
picture above and tap the ‘New’ on
the bottom.
Input the phone number and
message. Tap the send to send
SMS.
You can see the pop-up screen
when SMS is sent successfully.
SMS sent and receive (2)
How to receive SMS
How to use the Phone
When connected to the GSM network,
new message arrival will be alerted a
picture above.
50
By tapping one of the received messages, the
content will be displayed on the separate
window as picture above.
Controlling received SMS can be done by using
the menu on the ‘New Text Message' alert
window or on the Text Messages program.
Controls while on the phone
How to use the Phone
Functions while on the phone
Keypad
Change to Mode available to
input the Number on the
screen.
Mute
Setting for receiver not to
hear my voice while on the
phone.
Hold
Hold for a moment while on
the phone
Contact
End
Move to Contact
End phone call
Featured functions while on the phone
You can use various functions
when you select the button on
the bottom while talking on the
phone.
51
You can see the list of recent
calls by selecting ‘Call History’.
You can take a memo While talking
on the phone by selecting the Note.
Phone setting
How to use the Phone
Phone setting
52
Call Barring
Block the calling to the specific
number.
Caller ID
Turn on or off the Caller ID
function. If it is enabled, your
number will be shown to the
receiver.
Call Forwarding
You can forward the incoming
call to the other number.
Call Waiting
Voice Mail Text
Messages
Fixed Dialing
Tap the ‘Start > Settings > Personal
tap > Phone’ and in that menu you
can set the Security and Sounds.
Check the ‘Require PIN when phone
is used’ check box when PIN lock is
required.
Tap the ‘Start > Personal Tab >
Phone > Network’ to set an
information related to the Network.
( Change the Network ..)
Tap the ‘Start > Personal Tab >
Phone > Services Tab ‘ to set an
information related to the Service.
( In the Network or SIM )
You can receive another call
while you are talking on the
phone.
Set the SMS Service Center
number and Voice Mail number.
Limit the available phone
functions using PIN2.
Description of Service Menus
6. Usage of Device
Camera
Bluetooth
IrDA
GPS
Scanner
To use the Camera (1)
Notice before taking pictures
- The camera equipped with the M3 Sky is supported 2 mega pixels.
Usage of Device
Function
Mode
Still
Normal, Burst, Timer
Brightness
Resolution
White Balance
Flash
AF
N/A
-3, -2, -1, 0, +1, +2, +3
QCIF, QVGA, CIF,
VGA ,SVGA, SXGA, UXGA
QCIF, QVGA
Comment
Setting for taking photo
Setting for Brightness
Setting for size
Automatic, Sunny, Cloudy, Fluorescent, Incandescent
Setting for White
balance
Flash ON, Flash OFF
Setting for Flash
ON/OFF
Trig AF
Setting for Auto Focus
Camera Program Processing Screen
54
Video
Camera is optional. On the device with no built-in camera, Camera function can not be used.
QCIF(176x144), QVGA(320x240), CIF(352x288), VGA(640x480), SVGA(800x600)
SXGA(1280x960), UXGA(1600x1200)
To use the camera (2)
To process the camera program
Usage of Device
- You can process the camera program when you tap the camera button or tap the camera icon on the
'picture or video'.
Select the 'Start > Programs > Pictures & Video.
55
You can process the camera program when you select the camera
icon on the Picture & Video or select the camera icon in the menu.
Tap the ‘Menu > Options … > Camera Tab’ and then you can set the route of the storage memory ,
name and quality. You can set the Video on the Video Tab.
To use the camera (3)
Taking a Still photo
Usage of Device
Execute the camera program first. Move around to focus the desired
item.
Finally press the camera button to take a picture.
After executing the camera program , Preview mode will be changed
to standby mode after certain amount of time.
In order to start Preview Mode again, just tap the screen or press the
camera button.
56
After taking a picture, the captured image will be displayed on the screen.
If you want to execute the camera program, tap the camera button at the
bottom or click the camera icon on the left of window.
You can see the list of pictures taken previously by tapping ‘Thumbnails’ in
the Camera shooting mode.
To use the camera (4)
Taking videos
Usage of Device
If you want to take a video, select ‘Menu >
Videos' after executing the camera program.
57
While taking a video, you can
either stop (by tapping stop
button) or pause. (by tapping
pause button)
If you want to watch the video taken, Select the 'Thumbnails' first
to see the list of video files available.
When you select the video you want, you can play the video
recorded.
Bluetooth Communication(1)
Bluetooth On / Off
Usage of Device
On the 'Today Main Screen' , select the Wireless State
bar or Tap 'Start > Settings > Connections and select
‘Wireless Manager’.
58
To turn on/off Bluetooth, tap the
The status of Bluetooth can be seen
Bluetooth on the Wireless Manage
on the wireless status bar on the
main screen.
Bluetooth is optional. Device without built-in Bluetooth can not use Bluetooth service.
Bluetooth support the transmission and reception of files between the serial connecting service and
Windows Mobile device.
Bluetooth Communication(2)
Setting the Bluetooth
On the Bluetooth setting screen, you can set the Mode, connecting to BT device and COM settings
Usage of Device
You can set the Bluetooth mode
and establish connection when
you tap the 'Bluetooth' icon on
the Start > Settings > Connections.
59
In the Mode tab, you can turn
on/off Bluetooth and make visible
or invisible the device from outside.
In the device tab, you can search
and connect to other Bluetooth
devices.
In the COM Ports tab, you can
set incoming Port and outgoing
Port.
Bluetooth Communication(3)
To connect the Bluetooth
Usage of Device
- you can establish the connection by searching, matching pin code and selecting the service.
You can search the Bluetooth device
available when you select the 'Add
new device...' on the Device Tab.
Select a device to connect with and
tap 'Next' . Also you can select
the 'Refresh' button if there is no
device available.
60
Enter a Passcode to establish a
secure connection.
The passcode can be fixed one
or the one which is negotiated
between two parties in before
hand.
It shows the service available
on the Bluetooth device.
It shows the registered devices.
To add more device, please tab
‘Add new device’.
Bluetooth Communication(4)
How to make the serial connection via Bluetooth
It is possible to assign the registered device to the COM port.
Usage of Device
–
Once the device is registered,
please tap ‘COM Ports’ tab and
then select ‘New Outgoing Port’.
61
Select the device you wand to add
and tap 'Next'.
Select the port which is available,
and then tab ‘Finish’.
Once the connection is made, you
can use the available service.
Bluetooth Communication(5)
Transferring files via Bluetooth connection.
Usage of Device
- It is possible to transfer files between Windows Mobile devices via Bluetooth.
In order to transfer files via Bluetooth
connection, please go to 'Start > Settings >
Connections > Beam‘ and then Check
the 'Receive all incoming Beams ‘.
62
Select the file you want to transfer
in the File Explorer. Press the file
name long and tab ‘Beam File’.
By tapping ‘Beam File’, the list of available Bluetooth devices
shown. Please choose the device to transfer the file to.
IrDA Communication
Usage of Device
To connect via IrDA
M3 Sky can communicate with desktop, notebook, pocket PC as
well as other PDA that has OBEX protocol for the IrDA
communication.
To use infrared communication
ƒ
ƒ
ƒ
ƒ
Locate Infrared communication port to be in series with an infrared
(IrDA) port with other device.
Press a quick link icon > Infrared communication menu.
Infrared communication program is started and you can exchange
data.
If you want to have a serial communication with the device like
printer, it is possible by connecting the COM Port.
IrDA Communication Port
Connecting to IrDA Printer
ⲻ It is advised to communicate within the shortest distance.
Shorter distance makes data transmission faster.
File transmission between PDA
63
IrDA port is optional. Device without IrDA port can not use this feature.
To use the GPS(1)
To set the GPS
–
Usage of Device
–
Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS.
You don’t have to set additional information when there is a single program which uses GPS data. When
there are more than one program which use GPS data, you need to set the program port and hardware
port required for each program.
Select the GPS on the System Tab.
Set the GPS Program Port which
is not yet used.
Set the Hardware port of the device.
GPS hardware port for M3 sky is
COM2 and with baud rate of 9600.
GPS is optional. GPS feature is not available on the unit with no GPS module integrated.
64
To use the GPS(2)
To Connect the GPS
Usage of Device
- When there is a single GPS program, please use the GPS hardware port (COM2). When there are more
than one GPS program, please use the pre-defined GPS program port.
Execute the GPS program you want.
Set the COM Port and Baud Rate.
Sample GPS map is not provided by MobileCompia
65
It is available to use various
application using GPS like searching
the current location.
To use the scanner
How to use scanner
Usage of Device
–
Usage of 1D Scanner
Correct way
–
Incorrect way
Usage of 2D Scanner
Correct way
Incorrect way
Scanner is optional. You can not use scan feature with no scanner enabled device.
2D Barcode Scanner is optional. Only with 2D Barcode scanner enabled device, you can do 2D barcode scan.
66
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment
WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limit of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help
For Your Safety
FCC RF Exposure Information
Body-worn Operation
WARNING! Read this information before operating the phone.
This device was tested for typical body-worn operations with
the back of the phone kept 0.59 inches (1.5cm) between the
user’s body and the back of the phone. To comply with FCC RF
exposure requirements, a minimum separation distance of 0.59
inches(1.5cm) must be maintained between the user's body
and the back of the phone. Third-party belt-clips, holsters, and
similar accessories containing metallic components should not
be used. Body-worn accessories that cannot maintain 0.59
inches(1.5cm) separation distance between the user's body
and the back of the phone, and have not been tested for typical
body-worn operations may not comply with FCC RF exposure
limits and should be avoided.
In August 1996, the Federal Communications (FCC) of he United
States, with its action in Report and Order FCC 96-326, adopted
an updated safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are consistent with
the safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC guidelines and
these international standards.
CAUTION
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair call
quality, damage the phone, void your warranty and/or result in
violation of FCC regulations. Do not use the phone with a
damaged antenna. If a damaged antenna comes into contact
with skin, a minor burn may result. Contact your local dealer
for a replacement antenna.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 69
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c92f12d8-6449-4f09-aec5-68d76a937c15
Modify Date                     : 2008:06:13 19:59:50+09:00
Create Date                     : 2008:06:13 19:57:19+09:00
Metadata Date                   : 2008:06:13 19:59:50+09:00
Document ID                     : uuid:7095b2d0-a239-465c-b843-c8ebdc467aeb
Format                          : application/pdf
Title                           : untitled
Producer                        : Acrobat Distiller 6.0.1 (Windows)

EXIF Metadata provided by EXIF.tools